Wyniki wyszukiwania: bcar

Sortowanie

240 modeli

P
PrintablesEpicxxxx

Rev 2 EX BCAR.

Barrel Mounting System (designed to print at .12 layer height) The Rev 2 EX BCAR system is designed with performance in mind. The new mounting system implements Extra Inch Technology®. The new barrel mount increases average velocity to…

Pobrania
1756
Polubienia
221
Ocena
4,88
P
PrintablesEpicxxxx

"ex" bcar barrel mount

Plain barrel mount for the “ex” bearing centering and rifling devices. This piece comes ready to print, I would recommend a brim at least on the main portion as you will see there is very little surface touching the bed. unfortunately it…

Pobrania
830
Polubienia
102
Ocena
5
P
PrintablesLeedle Dynamics

Hardware Free BCAR (For DZ Muzzles or 15mm OD Alu Barrel)

A bit of an experimental BCAR with agressive twisting for sticking inside DZ Muzzles or on the outside of 15MM OD aluminium tube

Pobrania
605
Polubienia
133
Ocena
5
P
PrintablesMighty Shrub

"Ex" BCAR Front End - Dart Zone Max Outlaw

Would you like your Dart Zone Max Outlaw to be more accurate, and look awesome while doing it?? Look no further than this drop-in replacement part that uses the “Ex” BCAR design by Epicxxx. This is installed just like the rest of…

Pobrania
581
Polubienia
99
Ocena
5
P
PrintablesManta Design

Xshot AEB Motorized Piston Pump BCAR Shroud

Update 8/4/25: Added a couple more versions with slightly adjusted openings if the original is too tight or loose for you. Alter the scale in your slicer if you need further adjustment. Easy to print shroud that friction fits over the…

Pobrania
550
Polubienia
106
Ocena
4,75
P
PrintablesCorvus

Xshot BCAR Shroud + Barrel Color Sleeve _ MPP _ X-Shot Motorized Piston Pump _ (or LONGSHOT 2.0)

Update --------- BCAR Shroud 1.1 ------> X-Shot MPP (or LONGSHOT 2.0 with EXTENDED custom barrels) + optional Barrel Color Sleeve for the MPP Wrap two to three layers of e-tape around the narrower rear section of the BCAR and insert it…

Pobrania
432
Polubienia
104
Ocena
5
P
PrintablesMisplacedMoose

"Moose Bite" SBCAR for Pro Nerf Blasters

Bearing orientation is marked on the prints themselves and it's not what you expect. Long collet needs 43 mm of barrel to attach to and is recommended for a tight concentric fit. Shorter collet needs 25 mm of barrel. Hardware is either 9…

Pobrania
425
Polubienia
87
Ocena
5
P
PrintablesTaffert Designs

The Nerf MooseSlug BCAR (bearing SCAR)

NEW!! - Added "Shorty" version for better muzzle clearance on Gecko 2.0 now 7mm shorter same shroud fits both versions.. _________ Features: Stronger pressure tongues won't snap easily Coarser threads won't strip Easy to turn grip Short…

Pobrania
390
Polubienia
93
Ocena
5
P
PrintablesChance

LockSleeve BCAR

This is the LockSleeve BCAR. It's what I use for competitive matches, and I think it's pretty damn good. It has two pieces: the Core, and the Sleeve. The Core has 6 "fingers" that sit around the barrel and are flexible. The Sleeve has…

Pobrania
355
Polubienia
66
Ocena
5
P
PrintablesMisplacedMoose

Foamgasm/Chance 15 bearing and 9 bearing BCAR

This thing is a waste of bearings compared to current options. Use this instead Uses either 9 or 15 3x7x3 F683ZZ flanged bearings and 3mm x 14mm pins to assemble. I used Foamgasm's collet and lynx connection and Chance's inline bearing…

Pobrania
326
Polubienia
38
Ocena
5

Shearforce Variable-Mode Nerf Rifling Attachment (PBCAR)

The Shearforce PBCAR is a variable-mode rifling attachment platform inspired by the principle behind the Rexfire Akasha “Super BCAR.” Featuring an initial, more aggressive PCAR segment to pre-rotate the dart, followed by a gentler BCAR…

Pobrania
312
Polubienia
92
Ocena
3,4
P
PrintablesZafC

Celestial BCAR

About: BCAR with aggressive venting and lots of options. Inspired by the Flag and Armor CNC BCAR and drawing ideas from Thantacles' RIPPCAR theory. Recommendations: >7 degrees low for up to 180fps, 6 degree med/high at 200, 5 degree high…

Pobrania
284
Polubienia
82
Ocena
5
P
PrintablesNekronomekron

hikari 103 - Nerf Blaster BCAR with quick release

I updated the hikari and made a modular version. You can find the new model here: https://makerworld.com/de/models/2446079-hikari-203-modular-bcar Explore the "hikari 103" - a high-performance 3D printed BCAR (Barrel Contact Accuracy Rig)…

Pobrania
261
Polubienia
58
Ocena
4,67
P
PrintablesChance

Null Pointer - A zero-degree BCAR

Uses either 9 or 15 MF63ZZ bearings (https://www.amazon.com/MF63ZZ-Shielded-Flanged-Flange-Bearing/dp/B07K78GY7N) and an equal number of 8-12mm M3 countersunk screws…

Pobrania
214
Polubienia
53
Ocena
5
P
PrintablesTi

Hardware-free "ex" threaded bcar

I took the threads from the ex bcar and grafted them onto Leedle's hardware-free bcar. Then I cut it in half. Compatible with the pins and rollers of the original hardware-free bcar, as well as any mounting system that uses the original…

Pobrania
212
Polubienia
44
Ocena
5
P
Printables79th Jedi

Nerf BCAR without cover

Same as the original BCAR with cover in every way, except that the main unit does not have the cover, because i like the aesthetic. Original files for the lock/collet are included as well. Link to the original BCAR with cover is under the…

Pobrania
207
Polubienia
45
Ocena
0
P
PrintablesZafC

Super BCAR Experimentation

Basically a public beta of "Super BCAR" testing models I throw together on a whim Apparently the Akasha BCAR works really good. Whether it's the enormous porting, the inline PCAR, progressive crush, or all of the above, I've no idea. May…

Pobrania
205
Polubienia
58
Ocena
5
P
PrintablesMoxieMan

Hardware Free BCAR - Ex Compatible

Use all the support parts from the original, but print this version of the body. There are a number of Rev 2 EX BCAR mounts now for various blasters. Now you can have a fully 3d printable BCAR. EDIT - uploaded a better version. Original…

Pobrania
204
Polubienia
42
Ocena
5
P
PrintablesWaFfLe

Umoya SuperBCAR

UPDATE: 20261002 I have been swamped with work and unfortunately haven't been able to dedicate the time to working on this project. However, my schedule has freed up and I should be able to get the final release version out by the end of…

Pobrania
184
Polubienia
47
Ocena
5
P
PrintablesMisplacedMoose

21 bearing BCAR and muzzle brake for 16mm nerf barrels

Uses 21 F683ZZ 3x7x3mm Flanged Ball Bearing and 3x14mm pins

Pobrania
179
Polubienia
41
Ocena
5
P
PrintablesCorvus

Rev 2 EX BCAR Adapter _ X-Shot Fury-X

Plug-in adapter for the EX BCAR Rev 2 to be easily attached to the X-Shot Fury-X. Works with the standard muzzle of the FuryX! It just needs 4g of filament. Other Fury-X stuff can be downloaded here. The file is already pre-oriented. My…

Pobrania
169
Polubienia
39
Ocena
5
P
PrintablesTofuKat762

5xR BCAR

This is the 5xR BCAR, the culmination of all my past BCAR work. I use this as a no-compromise BCAR for competitive games, incorporating design elements from past works, commercially available BCARs and imput from competitive players for…

Pobrania
152
Polubienia
38
Ocena
5
P
PrintablesZafC

Hardware Free BCAR for DZ muzzles and 16mm barrels with alternate V rollers

Leedle's BCAR adapted to friction fit over 16mm barrels, and alternate V shaped rollers (same size and larger). Some models require 10% scaling -v2 has bits to better friction fit over barrels so you can forego tape

Pobrania
152
Polubienia
21
Ocena
5

HCB Hardware Free BCAR

This is my take on a modular hardware free BCAR. It makes your blaster more accurate and also looks dope as heck. Its very accurate, even compared to other SCARs and BCARs I have laying around. It just uses pieces of filament as axles.…

Pobrania
143
Polubienia
79
Ocena
5
P
PrintablesJem657

Hardware free BCAR for 16mm OD barrels

This is a remix of the hardware free BCAR to fit on 16 mm OD barrels You will need to print 12 Pins and 12 Rollers. Make sure they will spin relatively freely when installed. If not trim the edges of the rollers and pins or sand the holes…

Pobrania
132
Polubienia
24
Ocena
5
P
PrintablesBuilder BB

GryphEX BCAR

Made using epicxxxx's bearing centering and rifling device with changes to accommodate fitting to a Gryphon with Banned Blaster cage. A tapered guide was needed to feed the darts into the device. Turned the orientation of successive sets…

Pobrania
131
Polubienia
18
Ocena
5
P

Dart Zone BCAR Shroud

a cosmetic cover for the Dart Zone BCAR by covering the bearing holes, allows the blaster to be safely ‘deprimed’ by covering the barrel with a fingertip

Pobrania
131
Polubienia
25
Ocena
0
P
PrintablesGemeneye

GP3D Nerf Pro Torrent Pump Kit with Epicxxxx Rev 2 BCAR Compatibility

Hello everyone! This is my remix of GP3D's beautiful Nerf Pro Torrent Pump Kit that allows it to be used with a Classic Epicxxx Rev 2 EX BCAR as well as with my 3D printed Torrent Stocks . I absolutely love GP3D’s aesthetic stylings, so…

Pobrania
130
Polubienia
57
Ocena
4,5
P
PrintablesFlygonial

Twist Clamp 3-Inline BCAR (5/8" to 16mm)

A general-purpose Nerf BCAR meant for 16mm OD barrel mounts. Features a barrel clamp to secure into place and a thumbscrew designed for extra leverage. Requires 12x M3x8-12 bolts, 9x F683ZZ 3x7x3 bearings, one M3x20 bolt and one M3 hex…

Pobrania
130
Polubienia
37
Ocena
5
P
PrintablesMoxieMan

Venom Pro Muzzle Extension (With BCAR option)

Follow the printing instructions for the original model, with one exception - print at .16 layer height or .12 layer height for the threading. Use it with the hardware free BCAR located HERE . Or use one of these alternate tips in lieu of…

Pobrania
127
Polubienia
21
Ocena
0
P
PrintablesChance

Zinc 2.0 - Integral Bearing SCAR (BCAR)

Uses: 9 3mm x 7mm x 3mm F683ZZ bearings ( https://www.amazon.com/dp/B07Z3DRZX9 ) 9 3mm x 14mm steel dowel pins ( https://www.amazon.com/dp/B07Y58JKMC ) This piece replaces your Zinc 2.0's front piece and integrates a 10 degree BCAR into…

Pobrania
120
Polubienia
22
Ocena
5
P
PrintablesDritten999

BCAR for Orion Blasters Lynx v2

I remixed the “ex” bearing centering and rifling device to integrate with the Lynx by Orion Blasters. It slots over a 45cm barrel and is secured with the standard front pin and a 10mm m3 button head screw and a heat set insert in the…

Pobrania
119
Polubienia
26
Ocena
5
P
PrintablesCorvus

Adapter - Silly SCAR Thread : EX BCAR Rev 2 Thread

Adapter - Silly SCAR Thread to EX BCAR 2 Thread Adapter to screw on an EX BCAR Rev 2 to a Silly SCAR thread (nut) quick and easy. Use the O-ring seal as usual to attach and fix the adapter to the barrel. Works also great with the Threaded…

Pobrania
118
Polubienia
31
Ocena
5
P
PrintablesFlygonial

Gameface Trion M3 Bolt BCAR

The Trion is a blaster that comes as a neat package configurable for a variety of games out of the box but doesn't include a muzzle device. 7.5 degrees was specified as a middle-ground twist ratio that isn't excessive for 200 FPS, is well…

Pobrania
117
Polubienia
33
Ocena
5
P
PrintablesChance

Trion BCAR

A BCAR for your Trion. Attaches to the orange plastic muzzle attachment point. The first few times you attach/detach it, it may be very tight on the last little bit, but it should wear in to be a snug-but-doable hand twist. If you can't…

Pobrania
116
Polubienia
26
Ocena
0
P
PrintablesCake

EX BCAR Remixes

A series of experimental BCAR remixes for the EX BCAR system. Many of these are untested. All are set at the 12.8mm squish setting except for CXCAR3-12-8_12-9, which goes from 12.8 to 12.9. The ones with increasing numbers are progressive…

Pobrania
115
Polubienia
22
Ocena
0
P
PrintablesTi

ScadDcar: Hardware-Free BCAR/DCAR With Customizable .scad File (Ex and Ex Rev 2 Threads)

Want a bcar, but don't want to shell out for bearings? Do you have very specific requirements for what your blaster needs to optimize accuracy? This is a fully printable bcar, or dcar, that you can customize yourself using OpenSCAD. Just…

Pobrania
108
Polubienia
24
Ocena
5
P
PrintablesNekronomekron

hikari 103 slim - Nerf Blaster BCAR with quick release

I updated the hikari and made a modular version. You can find the new model here: https://makerworld.com/de/models/2446079-hikari-203-modular-bcar Explore the "hikari 103 slim" - a high-performance 3D printed BCAR (Barrel Contact Accuracy…

Pobrania
107
Polubienia
25
Ocena
0

Hardware free BCAR for the Nerf Infinus

Edit 05/10/2024: After some more modification i've updated the design and it's now compatible with any dart design. Introduction This is an internal BCAR for the Infinus based on the Hardware free BCAR by LeedleDynamics. The rollers have…

Pobrania
101
Polubienia
41
Ocena
5
P
PrintablesMisplacedMoose

BCAR for SpitfireProducts Ranger Sniper Nerf Rifle

Hardware required: 42 x F683ZZ 3X7X3 bearings 42 3x22mm (or shorter) pins These can be found on Aliexpress, Amazon, or Moose Mod Shop

Pobrania
100
Polubienia
31
Ocena
0
P
PrintablesYetiEngineering

OpenBCAR - Nerf Rifling

OPEN-SOURCE, I have both .step and .stl files available aswell as my .f3d file Nerf rifling with options for 15, 12, 10, 8, 6 or 4 degrees of angle. Has ~12.55mm of crush Most options use 4 rows of 3 Options marked as compact use 2 rows,…

Pobrania
95
Polubienia
58
Ocena
5
P
PrintablesAshton Rogers

Silly-compatible Nerf BCAR

It is designed to be printed without supports. This is a significant improvement from my previous BCAR. It lacks porting/venting so it will not be ideal for high PT/barrel ratio blasters. Let me know what you think! The BCAR and the…

Pobrania
93
Polubienia
32
Ocena
5

Rev 2 EX BCAR adapters for the Protean

Introduction After tinkering around with the BCAR barrel inserts for the Protean and being frustrated with stuck and (with the dual stage cage) chewed up darts, I've started looking around for alternatives. I've stumbled upon the EX BCARs…

Pobrania
92
Polubienia
17
Ocena
5
P
Printablesflubb42

Nerf Nstrike Hardware Free BCAR

Created something silly yet simple for spring-modded Nerf blasters, as the full-length darts flew everywhere after the FPS increase. I was surprised it wasn't made yet, so here we go again. I took the model of the Nerf Delta Muzzle from…

Pobrania
87
Polubienia
42
Ocena
0
P
PrintablesMoxieMan

Rev 2 Ex BCAR Adapter for Venom Pro w/ lower Picatinny Rail

Have a BCAR & a lower picatinny rail on your Venom Pro. Print on its nose with organic supports (ensure you adjust your top z-distance. I used a .12 layer height with a .16 top z-distance and the supports came right off with no issues. I…

Pobrania
86
Polubienia
20
Ocena
0
P
PrintablesMoxieMan

Rev 2 EX BCAR Adapter for Venom Pro

Who doesn't like the tactile satisfaction of screwing on a silencer… I mean BCAR to your blaster and then lighting up your best friend? Now you can do that with a Venom Pro. Print & insert, attach your favorite Rev 2 EX compatible BCAR. I…

Pobrania
85
Polubienia
22
Ocena
0
P
PrintablesAndy L

Triangular Moose BCAR

Was having good results with Taffert Designs MooseSlug BCAR, but I really wanted that oddball triangular aesthetic - designs of which seem to have largely disappeared off printables/thingiverse/cults. So I remixed. Yes it's nowhere near…

Pobrania
85
Polubienia
18
Ocena
5
P
PrintablesLoneWolf052

'Woof' BCAR - Hardware free, low profile BCAR for the Fury X

UPDATE 30th Dec 2025: Added 'loose' versions of muzzle and rollers with more clearance for the filament. If you have trouble getting the filament in or if the rollers don't roll freely print the loose versions. This is a short and low…

Pobrania
83
Polubienia
25
Ocena
4,5
P
PrintablesChance

Covered 3-layer BCAR

Update 9/8/22: Added looser-fitting cover after reports of overly-snug covers. This is a 3-print, 3-layer (9 bearing) BCAR for foam blasters. There are vents near the base to allow excess pressure to escape without fishtailing the darts.…

Pobrania
83
Polubienia
23
Ocena
0
P
PrintablesZafC

Variable Hardware Free BCAR for 16mm barrels or DZ muzzles

Entirely printable BCAR with various options for rollers and angles. 5 ,6 ,7 ,8 ,10 ,12 , 15 degree options and more Flat, rounded, or V shaped rollers Additional crush by aligning the shroud to press rollers in. Make sure the rollers can…

Pobrania
81
Polubienia
19
Ocena
5
P
Printableslucas32

No Hardware BCAR For Silly Threading

Print with original settings

Pobrania
81
Polubienia
23
Ocena
5
P
Printablesgifd

Dart Zone Pro MK3 Experimental BCAR

An experimental 5° BCAR for the Dart Zone Pro MK3. Designed for Worker half length darts and made to fit into a Banned Blasters cage. Friction fits into the blaster using the cage and muzzle, with a piece to keep it in place. Still in…

Pobrania
81
Polubienia
17
Ocena
4
P
PrintablesHoneyBajjar

Rev 2 EX BCAR Suppressor Shroud

Can be used on any blaster that takes the EX BCAR rev 2 and has the exposed barrel space behind the bcar to accommodate the suppressor. Replaces the “DecoRing” part of the BCAR. Four versions are available: Regular for Classic BCAR…

Pobrania
80
Polubienia
29
Ocena
0
P
PrintablesLeeOh

BCAR for FDL-3

Angle: 8 degrees (optimized for FLD-3 standard build) Recommended FPS range: 130 - 200 FPS Required: 12 x MF84ZZ 4x8x3mm Flanged Bearings 12 x M4x10mm Screws 12 x M4 Washers Compatibility: Work with both half and full length darts. Note:…

Pobrania
80
Polubienia
13
Ocena
0
P

BOXER PRO SC BCAR by DMF

LASER YOUR OPPONENTS WITH THE BOXER PRO BCAR FROM DMF. Based on the Voidrunner zero degree BCAR this attachment help stabilizes the darts you are flinging causing major problems for the opposition. The rows are your preference. This takes…

Pobrania
73
Polubienia
38
Ocena
4
P
PrintablesManta Design

Fat Boy BCAR Shroud Xshot Motorized Piston Pump MPP

The Fat Boy BCAR Shroud features an interchangeable design. Included are 5 different shrouds that friction fit on for easy swap. Also has a built-in clamp that keeps it secure around the bcar and barrel. Uses M3 hardware but isn't…

Pobrania
72
Polubienia
34
Ocena
5
P
Printablesfirelion

“捷兔”5线轴承管 Agile Rabbit LockSleeve BCAR

介绍看图片。 2024/04/22 UPDATE: ADD 10/15/20/25 Bearing Version. BOM: F683ZZ flanged bearing 30 3 x (8 min~20 max) set screw 30 Aluminum alloy/PC/PVC … Tube 36mm OD x 34mm ID, 100mm long for 30 bearing version, 85mm long for 25 bearing version,…

Pobrania
72
Polubienia
6
Ocena
0
P
Printablesnammybd.

XShot Longshot BCAR/WCAR/DCAR

Made to work perfectly with a stock XShot Longshot. I extended the mounting area to 19 mm to get rid of the empty space that can hinder performance. I also added a screw hole on the side of the mount and expanded it to be able to screw it…

Pobrania
71
Polubienia
8
Ocena
0
P
Printablesmainmachine

X-Shot Thrasher Internal Ex BCAR

The thrasher is an excellent blaster however it isn't quite accurate enough for me out of the box. The internal barrel is simple and there's lots of room in there, so let's stick a BCAR in there! I originally wanted to put a version of…

Pobrania
71
Polubienia
20
Ocena
5
P
PrintablesTrevor

EX BCAR 18 Bearing Suppressor Lookalike

I took Epicxxxx's bearing centering and rifling mod for standard 16mm barrels and doubled up the amount of bearings then created a suppressor appearance cover to fit around it. I included 3 variations of crush with 8 degree spin. From…

Pobrania
71
Polubienia
14
Ocena
0
P
PrintablesMWHall

Meowser EX BCAR

NEW UPDATE Added a revision 2. This uses the threading from the rev 2 EX BCAR, so you can thread on any BCAR size/twist you want. Files and assembly/print instructions for the BCAR itself can be found here…

Pobrania
71
Polubienia
8
Ocena
0
P
PrintablesTi

Dart Zone/Gameface Trion "Ex" Bcar Thread Adapters

Attach your bcar with “ex” threads to your gameface trion or dart zone blaster! The original ex bcar barrel mounts are intended to be printed at .12mm, therefore so are these. They both need supports, touching build plate only. Print the…

Pobrania
71
Polubienia
21
Ocena
0
P
PrintablesZafC

Infernal BCAR - A Hardware Free Modular BCAR

A cheaper, fully printable, modular alternative to the Celestial BCAR. All the original angle and crush options are here as well as some additional angles that wouldn't error out my timeline. The customizable shroud designs return and a…

Pobrania
67
Polubienia
46
Ocena
0
P
PrintablesChance

Covered 5-layer BCAR

Update 8/24/22: Uploaded new version of everything. Bearings are now centered on their flanges instead of their bodies, which better reflects which parts are in contact with the darts and improves accuracy. Vents have been made larger and…

Pobrania
67
Polubienia
16
Ocena
5
P
PrintablesTFireFox

HC Diana Threaded BCAR

I have been wanting a BCAR for the Diana for awhile. Unfortunately, the freight is more expensive than the product itself. This is a 15 degree BCAR by Foamgasm that has been shorten and made a little bit wider so that the crush is less…

Pobrania
66
Polubienia
19
Ocena
5

Cover Shroud for X-Shot BCAR

This is a shroud cover that fits over the BCAR that comes with the Xshot Motorized Piston Pump blaster. It has very slight channels inside that will grip on your BCAR. The nature of the Xshot BCAR has all the moving parts contained within…

Pobrania
66
Polubienia
23
Ocena
5
P
PrintablesCorvus

Threaded Faux Barrel Muzzle *** "EX" BCAR Front End - Dart Zone Outlaw (by Mighty Shrub)

Threaded Faux Barrel Muzzle (ID=17,1mm) --> "EX" BCAR Front End (by Mighty Shrub) - Dart Zone Outlaw I made a printed faux barrel with the thread of the EX BCAR to fit the Outlaw 'EX' BCAR Frontend by Mighty shrub as "placeholder" for an…

Pobrania
65
Polubienia
35
Ocena
0
P
PrintablesKptnAutismus

Alternate Rev.2 EX BCAR mount

my take on a BCAR mount. print out of something that can hold it's shape better than PLA. i used ABS, but PETG should work too.

Pobrania
63
Polubienia
19
Ocena
0
P
PrintablesAshton Rogers

16mm Nerf Barrel BCAR and PCAR attachment

THE NEWEST BCAR I POSTED CAN BE PRINTED WITHOUT SUPPORT. IT LOOKS BETTER AND IS EASIER TO PRINT. The BCAR is set at 10 degrees with progressive crush. Not sure if anyone has done that before so please give me feedback on its performance…

Pobrania
63
Polubienia
23
Ocena
0
P
PrintablesJosh

FDL3 BCAR

Dual stage FDL3 BCAR 15deg. (6) F683ZZ flanged bearings https://www.amazon.com/gp/product/B07Z3DRZX9 (6) 3mm x 14mm dowel pins https://www.amazon.com/gp/product/B0819FZM8F Print at 0.15mm layer height or smaller. Make sure you are not…

Pobrania
63
Polubienia
5
Ocena
0
P
PrintablesManta Design

Xshot MPP Motorized Piston Pump BCAR Clamp

I found that the xshot bcar was loose on some of my barrels so I quickly designed this to fix the issue. Model is print oriented and doesn't require support. Uses M3 hardware. *I only have pla+ at the moment so I am unsure if basic pla…

Pobrania
61
Polubienia
19
Ocena
5
P
PrintablesChuck Bengis

EX BCAR Rev 2 Compatible Sniper Barrel Brake for Nerf blasters

Made an adapter for Moose's barrel brake using the middle collet on the double ended threads. By keeping the parts separate, the BCAR on the inside of the brake can be swapped by twisting and removing the assembly from the brake housing.

Pobrania
59
Polubienia
26
Ocena
0
P
PrintablesTrevor

Nerf Pro Torrent BCAR Collet Front End

I smashed Redcowls front end with Leedle's hardware-less bcar and here we are. So far it works great. You want a barrel that protrudes from the front end 31mm for the best results.

Pobrania
57
Polubienia
16
Ocena
0
P
PrintablesJC works

X-shot Spinshot (BreakBarrel) BCAR barrel

I know some mods can boost this blaster to much higher FPS (by swapping to a longer barrel), but I am not a fan of lengthening this already long blaster; I would like to keep it as is. So I made this to boost performance a bit while not…

Pobrania
54
Polubienia
30
Ocena
5
P
PrintablesFoamProArmory

The .608 BCAR. A BCAR With MASSIVE BEARINGS

A BCAR With MASSIVE BEARINGS Uses 9 .608 ball bearings which are a perfect press fit on the BCAR. Requires one O ring for the collet. This is a 5-degree BCAR for high fps blasters 200-300fps. More options coming soon! Step file included…

Pobrania
53
Polubienia
34
Ocena
5
P
PrintablesNitrEX4

BCAR Compatible Barrel Shroud for Kirin

I remade the shroud from scratch then made the shroud big enough to allow for a BCAR. It can probably fit any BCAR but I've tested with the Worker BCAR without sleeve, ex BCAR, and ex BCAR rev2. Print Instructions: 3-4 walls, 15% infill,…

Pobrania
52
Polubienia
10
Ocena
5
P
Printablesmadeinhua

Compact Rev 2 EX BCAR for Dart Zone Outlaw Foam Blaster

This is a remix of Epicxxxx's excellent Rev 2 EX BCAR, shortened to remove the threaded section and with a 19mm insert added. It's optimized for the Dart Zone Outlaw foam blaster. The 8 degree version with #3 crush seems to stabilize Ruby…

Pobrania
51
Polubienia
20
Ocena
0
P
PrintablesChuck Bengis

EX BCAR Rev 1 to 2 Adapter

Simple threads linking EX BCAR rev 1 and 2.

Pobrania
50
Polubienia
7
Ocena
5
P
PrintablesZafC

Low/No Hardware BCAR/DCAR for Siren Blink

BCAR for the Siren Blink using washers like BaconCreations' DCAR design. Looser version washers need the inner sleeve to get effective crush and friction on darts (It just moves out of the way if not). Sanding of pins recommended to get…

Pobrania
49
Polubienia
16
Ocena
5
P
Printablesnil0

Ontos SillyHikari PCAR/BCAR

This remix adds new inserts for the Ontos SillyHikari Scar by LS MODS . Also adds a knurled TPU ring to the barrel attachment base. This setup allows you to quickly switch between different *CARs while maintaining a consistent look. PCAR:…

Pobrania
49
Polubienia
21
Ocena
0
P
PrintablesKyle Bernard

NERF Ultra AMP/FOCUS Integrated BCAR for Kuryaka's Short Dart Single Stage Conversion Kit

This BCAR is only designed to be used after mod'ing your Ultra AMP/FOCUS with Kuryaka's Single Stage Short Dart Conversion kit. I have designed this BCAR to be a simple drop-in (NO SHELL CUTTING). This BCAR fills all of the empty space in…

Pobrania
48
Polubienia
13
Ocena
0
P
Printablesdonutcat

Null Clamper - A Mishmash BCAR

I fancied up the marvelous Null Pointer by adding the entirely superfluous camlock mechanism from the Hikari 103. Completely unnecessary but feels so nice. Includes 9 and 15 bearing versions. Don't close the camlock without a barrel or…

Pobrania
48
Polubienia
15
Ocena
0
P
PrintablesCorvus

Lynx _ EX BCAR Rev.2 Adapter _ (just slide it onto the barrel)

Simply slide it onto the aluminum barrel. I added the thread for the EX BCAR Rev.2 to a friction fit sleeve for 16mm aluminium barrels to easily attach an BCAR to the LYNX. The sleeve has an outer diameter of 19mm and can be slided…

Pobrania
47
Polubienia
23
Ocena
0
P
PrintablesChuck Bengis

Rev 2 Ex BCAR Front End for Dart Zone Outlaw

Updated front end to have the male threads for v2 ex bcars.

Pobrania
47
Polubienia
12
Ocena
5
P
PrintablesHoneyBajjar

Stryfe Banned Blasters Cage (with optional BCAR)

Both of these cages require shell cutting. For the regular cage refer to the Banned Blasters video on shell cutting a Stryfe. For the BCAR version, extra shell cutting is required near the front, as well as some for the front muzzle…

Pobrania
47
Polubienia
20
Ocena
0
P
PrintablesTFireFox

BCAR PCAR Hider

I don't like the long barrel sticking out of my blaster. So I designed a ‘suppressor-like’ thingie to hide my BCAR or PCAR while at the same time making it a little more tacticool (or for some, might just find it ridiculous). I'm using…

Pobrania
45
Polubienia
5
Ocena
0
P
PrintablesMSBstudios

combcard v.3

the all new combcard v.3 is a perfected version of my first two combcards (see link below) featuring stronger teeth that are less likely to crack (like you have to try really hard) and a new stylish key ring hole in the corner for that…

Pobrania
45
Polubienia
18
Ocena
5
P
PrintablesGikote

Stryfe Muzzle BCAR

Description : I wanted an accuracy device for my Stryfe, and I needed to decrease the FPS a bit. I tried some PCARs and even a NStrike lug BCAR, but was not thrilled with any of the results. That made me think of other ways to mount it…

Pobrania
45
Polubienia
27
Ocena
0
P
PrintablesCorvus

BCAR Shroud - X-Shot Longshot 2 (compatible with stock barrel, muzzle and BCAR) - XLS 2.0

BCAR Shroud -- X-Shot Longshot 2.0 (compatible with stock barrel, muzzle and BCAR) .... for a bit more color customisation on the blaster and to partially cover these unsightly high-gloss plastic parts. Shrouds for the X-Shot BCAR, to be…

Pobrania
45
Polubienia
14
Ocena
0
P
PrintablesAstropulse

Simple 6 Bearing Silly Collet BCAR

Pretty simple, a bcar with 6 bearings. Uses the same 3x7x3 F683ZZ flanged bearings and 3x14mm pins as most of Misplaced Moose's bcars, because it uses the same geometry. Buy two of these:…

Pobrania
44
Polubienia
20
Ocena
5
P
PrintablesThe_GOAT

Kuragari - Foam Dart Blaster BCAR

Its the hikari 103 with a silly collet. I also un progressived the rifling and made it 8 degrees of twist instead. Both variants are available for those who want them. This uses F683ZZ bearings and is 16mm barrel compatible because that…

Pobrania
43
Polubienia
14
Ocena
4,5
P
PrintablesGeorgy

EX BCAR Rev2 barrel mounts - 15&16mm barrels - slotted - wide bore

Epicxxxx epic bcar V2 tailored to fit 15&16mm OD barrels like on EU Lynx Muzzle vent slots added for underbarreded builds Internal bore widened to 14 mm Follow Epicxxxx's printing instructions for thread printing!

Pobrania
43
Polubienia
12
Ocena
0
P
PrintablesZafC

Ripjaw BCAR - A Progressive Celestial BCAR

A dedicated page to a BCAR previously buried under hundreds of permutations of its predecessor. This BCAR uses the Celestial BCAR's geometry to make a set of progressive twist options, maintaining the original flange alignment, heavy…

Pobrania
42
Polubienia
16
Ocena
0
P
PrintablesChance

Covered BCARs (3-layer and 5-layer) with o-ring retention

Important note: print the BCAR bodies muzzle-down! Much like my other BCARs, these all use F683ZZ (3mm x 7mm x 3mm) flanged bearings and 3x14mm dowel pins. These also use the same -016 O-ring as Sillybutts' MXL spigot scars (more info at…

Pobrania
42
Polubienia
5
Ocena
5
P
PrintablesZafC

Lynx Keyed Celestial BCAR

Celestial BCAR but with the mount adjusted to fit snugly into a Lynx and be secured by the pin. Existed before in the original files, but in very limited configurations. It just seemed a little moot at the time since a standard lynx is…

Pobrania
40
Polubienia
13
Ocena
0
P
PrintablesKnoppix Hire

Double Length 12.4mm flange Crush X 20 degree EX BCAR

The original EX BCAR wasn't crushing or spinning my stefan darts properly so I chopped a second one and double stacked.

Pobrania
40
Polubienia
7
Ocena
0
P
PrintablesKyle Bernard

Nerf BARRICADE RV-10 Integrated BCAR (Elite Dart Conversion)

This BCAR was designed to be a simple drop-in (NO SHELL CUTTING) for the OLD BARRICADE RV-10. This BCAR fills all of the empty space in the original muzzle/barrel adding much needed accuracy. NOTE: This BCAR will only fit if you are using…

Pobrania
40
Polubienia
15
Ocena
0
P
PrintablesCorvus

Smooth Collet + Dekoring (no X-knurling) _ EX BCAR Rev 2

Smooth Collet and Dekoring (no X-knurling) for the EX BCAR Rev 2 I wanted these two parts looking smooth on the outside and removed the X-knurling. My print settings for PLA: 0,2mm layer height 5 walls 20% gyroid infill 7 top and bottom…

Pobrania
39
Polubienia
13
Ocena
5
P
Printablesbionicurry

mystery ex bcar

20 bearing BCAR using “ex” threading F683zz 3x7x3 bearings and M3x8 bolts Bearing flange faces arrow in picture

Pobrania
39
Polubienia
4
Ocena
0
P
PrintablesZafC

Low Hardware Washer BCAR for 16mm barrels and DZ muzzles

A low hardware bcar using M4 washers to spin darts. Fits over 16mm barrels and into DZ (19mm) muzzles. No barrel stop, so just make sure to stop before it touches the washers. 5,6,7,8,10,12,15 degree options available. Can add more if…

Pobrania
38
Polubienia
14
Ocena
0