Wyniki wyszukiwania: bearings

Sortowanie

928 modeli

P
PrintablesJerryie

Print in place bearings

Print in place small bearing set: https://www.printables.com/model/542689-print-in-place-small-bearings Print in place BALL bearing set: https://www.printables.com/cs/model/583731-print-in-place-ball-bearings Thanks, 3Dprintsmith for his…

Pobrania
29 766
Polubienia
7526
Ocena
4,77
P
PrintablesSHQ

BEARINGS - Print in place - with real rolling elements

Print in Place Bearings with real rolling elements. ! ATTENTION ! - these models are hard to print and fail easily. - your printer MUST be able to print gaps of 0,1mm width - clean your printbed - make sure, great adhesion is possible -…

Pobrania
16 272
Polubienia
5436
Ocena
4,81
P
PrintablesJerryie

Print in place BALL bearings

Quick tips for successful print: Use 3Dlac, glue stick, or Magigoo for better adhesion. ..or simply clean the bed with isopropyl Reduce flow rate to .95 If you are experiencing difficulty with bearing rotation, don't worry it should…

Pobrania
11 042
Polubienia
1913
Ocena
4,45
P
PrintablesPRINTER

Windmill - 100% printable - no support - no bearings - low friction - video

Windmill - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…

Pobrania
7612
Polubienia
2901
Ocena
4,86
P
PrintablesLordMelkor

Filament Spool Roller w/ 608 bearings

Filament Spool Roller w/ 608 bearings - Snapped together and no bolts - Linear Alignment Rail Remix of https://www.thingiverse.com/thing:2185015 EDIT-8/11: Tolerances of Rail have been adjusted. Tested with a layer height of 0.15mm…

Pobrania
5768
Polubienia
634
Ocena
4,82
P
PrintablesSTORM DESIGN

Winder Spool Holder with Bearings - Modular Design for Bambu Lab Filament Spool Switcher & Winder

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Winder Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher…

Pobrania
4837
Polubienia
279
Ocena
4,83
P
PrintablesJerryie

Print in place small bearings

My completely redrawn improved bearings. They were inspired by guppik from Thingiverse. They have improvements for easier printing and a new body structure. Print in place bearing set with bigger bearings:…

Pobrania
4689
Polubienia
692
Ocena
4,71
P
PrintablesSTORM DESIGN

Donor Spool Holder with Bearings - Modular Design for Bambu Lab Filament Spool Switcher & Winder

BEFORE STARTING THE IMPLEMENTATION OF THE PROJECT, READ CAREFULLY THE ENTIRE DESCRIPTION AND VIEW THE PHOTO GALLERY !!! This is a Remix “Donor Spool Holder with Bearings - Modular Design” for an amazing project " Filament Spool Switcher &…

Pobrania
3957
Polubienia
232
Ocena
4,86
P

GT2 Belt Tension Meter w/Bearings

Please see original post on GitHub for thorough description, manual and instructions. Geometrically this is the same as the original and the gauge/meter will read just as the first one. Additional BOM: 4- M3x10x4mm bearings (623-2RS), no…

Pobrania
3550
Polubienia
1029
Ocena
4,82
P
PrintablesPRINTER

Windmill XL - 100% printable - no support - no bearings - low friction - video

Windmill XL - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm Diameter…

Pobrania
3195
Polubienia
1143
Ocena
4,94
P
PrintablesSTORM DESIGN

Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver for Winder Spool Frame 2 - Modular Design and Winder Spool Holder with Bearings - Modular Design

This is a Remix “Handle for Manual Rewind and Hexagonal Adapter for Electric Screwdriver” for an amazing project " Filament Spool Switcher & Winder " Design by @MiklosKiszely_486882 TO FULLY COMPLETE THE PROJECT, DOWNLOAD THE REMAINING…

Pobrania
3149
Polubienia
236
Ocena
4,83
P
PrintablesDangineering

Rotary bearings 200mm---> 608Z

Trying my hand at making a robot dog and needed a thin bearing for my cycloidal drive, but didn't want to break the bank in just bearings alone. Hence I decided to design one I could use with just some standard 4.5mm steel BBs. Print…

Pobrania
2741
Polubienia
669
Ocena
4,93
P
Printablesmirabatek

PET Bottle Cutter with Bearings

You can use the PET Bottle Cutter to cut sprips from the PET bottles with selected width. The PET strip can be then used in machine which converts it to filament for 3D printers. This cutter is using sharpened bearings, they works like…

Pobrania
2650
Polubienia
485
Ocena
4,71
P
PrintablesJoshRC

Smooth Drawer Slide without Bearings (Vollauszug - Open Drawer System)

Here is the next Design from my "Open Drawer" Series. It is a full lenght drawer guide, that does not need any bearings! This Drawer Guide (in Germany its called Vollauszug btw.) uses the smooth surface of the PLA to run smoothly, so you…

Pobrania
2634
Polubienia
597
Ocena
5
P
PrintablesJerryie

Print in place bearings V2

The bearings are composed of three interlocking rings that can slide past each other to reduce friction. Printable bearings are great for prototyping because they are lightweight and easy to work with. Quick tips for successful print: Use…

Pobrania
2451
Polubienia
942
Ocena
4,78
P
PrintablesJohnMartin

Honing Guide for Chisels and Plane Irons No Bearings and Less Moreness

Low profile chisel and plane iron honing guide. No bearings are required. Assembly Screw both jaws all the way to the center (they should align), then attach the knob. The right side is reverse threaded, and the jaws will only go one way.…

Pobrania
2247
Polubienia
1118
Ocena
4,71
P
PrintablesHuDSoN

Filament Spool Winder - V3 Precision Remix Collection - No bearings or fittings required

I printed the spool winder by V3 Precision as had a couple spools that were not working well in the AMS. Although it worked and uses no fittings other than the screws to hold it down, it didn't respool as I expected. I had to touch the…

Pobrania
1999
Polubienia
141
Ocena
4

Bearings Library - Airsoft BBs

All the bearings use the standard 6mm Airsoft BBs. Ranging from 20mm, up to 200 mm (outer diameter), in 2 and 5 millimeter steps, and are 7.1mm thick . I don't even know what you could do with a 200mm bearing, but if you do, send us a…

Pobrania
1970
Polubienia
536
Ocena
4,77
P
Printableslogicalplanet

Lazy Susan Mechanism 2.0 (Conical Bearings)

This is a follow-up to my earlier posting of Lazy Susan mechanisms. I had a few comments about conical bearings and decided let's see if it is better and how much better. So here it is... Video at... https://youtu.be/1lg1n2SvySI More…

Pobrania
1852
Polubienia
405
Ocena
4,9
P
PrintablesFibonachio

Prusa Roller Filament holder with 608 bearings

The Prusa Roller is the name of a new filament unwinding tool which fits all common filament rolls. It has been designed so that the extruder has to overcome as little rolling resistance as possible. My motivation for designing the Prusa…

Pobrania
1661
Polubienia
177
Ocena
4,93
P
PrintablesPRINTER

Windwheel - 100% printable - no support - no bearings - low friction - video

Windwheel - 100% printable - no support - no bearings - low friction - video Complete printable windwheel which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Diameter 176 mm…

Pobrania
1652
Polubienia
678
Ocena
4,91
P
Printablestcosta

Modular & Minimal Filament Drybox (with no bearings required option)

Update (27 March 2025) - Uploaded a new thread only (no sides) universal spool holder axel at a user's request. This allows you to use two female ends and adjust to any size needed. See the "Drybox Axel - 50mm Universal Threaded (Male,…

Pobrania
1416
Polubienia
311
Ocena
4,95
P
Printablesfrederikf

100+ Ball bearings in standard sizes (608, 6200, 6202, 6204, 6206, 6000 and 6305 etc.) - uses airsoft 6mm bb balls or 4.5mm steel balls

UPDATED: Slightly larger tolerance (0.1mm diameter for the bearing balls). Choose random seams if you printer is not well-calibrated. I recently needed a slimmer ball bearing for a spinner project, so I did my own take on ball bearings to…

Pobrania
1414
Polubienia
129
Ocena
4,83
P
PrintablesNaNO3

Anycubic Vyper Filament Spool Holder with Bearings

This is an improved filament spool holder for the Anycubic Vyper or Creality CR-6 SE. It fits and locks with the original spool arm provided by Anycubic or Creality. Parts required 2x 608ZZ bearing 1x Spool Holder v21 (0.2mm layer height)…

Pobrania
1340
Polubienia
197
Ocena
4,76

Creality k1 spool holder with bearings

Spool holder uses: 608zz bearings or similiar (8x22x7) M8 bolt 8mm (although 10mm is recomended) m8 nut with lock (prevents loosening) 4x washers (to keep bearings from touching printed parts) Printed with Protopasta filament with default…

Pobrania
1330
Polubienia
193
Ocena
4,55
P
PrintablesRi3del

Grease injector for LMU8 bearings (reworked thread)

The injector design from @uepsie, which I received when I ordered the Zaribo 320, is pretty good. Just the thread wasn't perfect for the tube from Super Lube. So I reworked it. Now it fits real good! :) I hope you gonna like it. Please…

Pobrania
1306
Polubienia
169
Ocena
4,94
P
Printablestransformat

Turbine Windmill | Double Wind Chime with Bearings

Turbine Windmill with Rolling Bearings V4 Update 2026/06/14: What could be better than a turbine windmill? Two of them on top of each other, running in opposite direction 😁 (print the two 'double' files for that) V3 Update 2026/06/05:…

Pobrania
1301
Polubienia
516
Ocena
4,33

Neptune 4 Spool Roller Mod with Printed Bearings

The assembly is simple. Print the parts (1 off for each of the larger components and 2 off for the bearings) and assemble as in the photos. If you want to use a steel bearing, you can replace the printed one with an unsealed 609-9-24-7…

Pobrania
1289
Polubienia
203
Ocena
4,75
P
Printableserick.siders

608 Bearings - Recreator 3D - Community Bottle Cutter - RECYCLE - PET#1 - Plastic Bottle

I remixed the model to accept larger 608 bearings, as they were easier for me to grind flat with their larger size.

Pobrania
1263
Polubienia
143
Ocena
4,5
P
PrintablesEDnation

Voron Spool holder (608 bearings)

Voron V2.4, Trident, V0.2 and Micron Spool holder Important note Be mindful of the type of bearings you use. You don't want too much free spinning. Try to find cheap bearing (it's not every day we can say that !) or use printed bearings.…

Pobrania
1250
Polubienia
214
Ocena
4,92
P
PrintablesPRINTER

Windmill Toroidal - 100% printable - no support - no bearings - low friction - video

Windmill Toroidal - 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 137 mm…

Pobrania
1116
Polubienia
354
Ocena
5
P
PrintablesDrJones

spiky hand roller with printed bearings

Someone suggested to make a hand roller using my printed gear bearings - so I did, also throwing in a spiky texture. Printing: This model requires good precision and a well dialed-in printer and filament combination! Main parts: bed…

Pobrania
1109
Polubienia
321
Ocena
4,88
P
PrintablesWilko_SLO

Silent Rotating Table (BALL bearings)

Print with Z=0,2 PLA or PETG You can use it without ball bearings, but for the best performance, SILENT version you need 12pcs 5mm bearings. Buy here: https://www.amazon.de/-/en/sourcing-map-Stainless-Bearing-Precision/dp/B09FDL8YHB/…

Pobrania
959
Polubienia
79
Ocena
0
P
PrintablesSouthSerj

Large Spool Filament Holder for 3kg Reels (608 Bearings)

This 3D-printed filament holder is designed for larger filament spools weighing up to 3 kg. It features a robust and stable design, using 608 bearings for smooth and efficient spool rotation during printing. Its simple construction makes…

Pobrania
954
Polubienia
89
Ocena
4,83
P
PrintablesWendigo

Filament Spool Holder #002 (Bearings, Simple design)

Minimalist Filament Spool Holder with Bearing System (608ZZ Compatible) A simple, sturdy, and smooth-rolling filament spool holder designed for reliable everyday 3D printing. This design uses only 2 printed parts and features a tool-free…

Pobrania
933
Polubienia
373
Ocena
5
P
Printableshumebeam

Printed Linear Bearings

This is a bearing I designed specifically for one of my mods: QIDI X-Max - Improved X-Gantry With Tensioners It's similar in style to the commonly available IGUS bearings but I needed a slightly increased inner dimension (ID) to avoid…

Pobrania
931
Polubienia
127
Ocena
4,67
P
PrintablesWilli

Bearings ballfree similar DIN 625-1

If you like this model, please throw me a like. Designing the models is time, filament and coffee consuming. If you want to support my work bye me a coffee. Thanks! Check out my other models. Description: I like the idea of Jerryie's…

Pobrania
925
Polubienia
157
Ocena
4,85
P
PrintablesAjax Bachor

Print in place bearings [All Sizes!]

7mm thickness bearings of any diameter! designed for printing! Outer diameter ranges from 17-70mm, Inner diameter ranges from 3-56mm. Print Settings: Random Z Seam 0.2mm Layer Height 2 Perimeter Minimum PRINT THE BEARING WITH THE FLATS OF…

Pobrania
905
Polubienia
332
Ocena
4
P
Printables3DesignsCH

Spool Holder remix - for 1-4kg spools - 608 Bearings - no supports

This is a remix of KONEz*347 spool holder with 4x 608 bearings. I adjusted the rollers, no supports needed anymore and added a base to keep the feet together. This spool holder is 144mm wide, so it can handle almost every spool out there.…

Pobrania
883
Polubienia
130
Ocena
4,96
P
PrintablesAdrián Vidal

Fully parametric ball bearings

This design allows you to 3d print the casings that will make a ball bearing in combination with some bougth or even 3d printed balls. My chose was some steel balls that i bought on aliexpress but you can use whatever you want as long as…

Pobrania
848
Polubienia
46
Ocena
5
P
Printables3DMK

Optical Illusion Pinwheel with Bearings

Remix of Optical Illusion Pinwheel from Dalpek with bigger blades and 608 (2RS) bearings. Turns into the wind. Uses original blades, printed with 180% of original size. Needs three 608 (2RS) bearings and a 4mm diameter rod Print…

Pobrania
843
Polubienia
185
Ocena
4
P
PrintablesART TOO

BEARINGS - BEARING COLLECTION - Print In Place

Print in place bearings DIN 625 A oopening is added to insert lubricant TESTED !!! IF YOU NEED OTHER DIMENSIONS? JUST LEAVE A COMMENT

Pobrania
834
Polubienia
266
Ocena
5
P
PrintablesPRINTER

Windmill XL Cross- 100% printable - no support - no bearings - low friction - video

Windmill XL Cross- 100% printable - no support - no bearings - low friction - video Complete printable windmill which is easy to assemble and expandable with other parts. You need a screwdriver for assembling? Dimensions Length 127 mm…

Pobrania
819
Polubienia
282
Ocena
5
P
PrintablesNiuthon

Surreal Vertical Windmills - no bearings, no supports, Moebius inspired garden spinners

Not only are these windmills a rotating piece, but they also serve as a decorative objects with unique, organic forms characteristic of Moebius' art. The model is an elegant addition to gardens, balconies, or any area where you wish to…

Pobrania
816
Polubienia
210
Ocena
4,67
P
PrintablesRibby

Ender 3 V2 Filament Spool Holder w/ 608 Bearings

Remixed from: https://www.thingiverse.com/thing:5498768 This remix has areas carved out on both sides of the roller that will accept a 608 bearing. The pins are also remixed so that one end will fit snugly into a 608 bearing, and the…

Pobrania
814
Polubienia
83
Ocena
5

ZYLtech Texas/Huge spool holder. 5KG Spool! (4x 608 bearings)

This spool holder will hold up to a 168mm wide spool. It uses 4 608 skateboard bearings with a low tolerance/loose fit on the actual rollers but it fits tight with a small bit of force required to slot them in. if you have strength issues…

Pobrania
799
Polubienia
66
Ocena
4,67
P
PrintablesPr20100

Sovol SV06 Top Z bearings

Made from scratch, just few additions to the original to make it easier to print with ASA, ABS… and with bearing of course. Added clearence for the rod hole to prevent pushing down your motor mount when tightened 2 models : Standard With…

Pobrania
765
Polubienia
148
Ocena
4,5
P
PrintablesTheRealJonno

Spooly - Anycubic Kobra S1 side spool mount/hanger with bearings

Anycubic Kobra S1 side spool mount/hanger with bearings. This is a side mounted spool holder which incorporates 4 x 608ZZ bearings to give least resistance. It has a lip that fits between the lid and case snugly and securely (make sure…

Pobrania
752
Polubienia
111
Ocena
5
P
PrintablesPotterke

Butterfly Knife (with bearings)

Assembly is easy and simple no need for istructions.

Pobrania
748
Polubienia
111
Ocena
4,57
P
PrintablesWendigo

Filament Spool Holder #001 (Bearings, Simple design)

3D Printed Filament Spool Holder with Bearings – Simple Design, Tool-Free Assembly This 3D printed filament spool holder is designed to provide a practical, durable, and easy-to-assemble solution for any 3D printer setup. Its minimalist…

Pobrania
739
Polubienia
327
Ocena
5
P
PrintablesUser27

QIDI Printers (Q1 Pro, Plus4, X-Max3, X-Plus3, Q2, Max4) Spool Holder with Bearings

I designed this spool holder for QIDI printers because the original one, when used with cardboard spools, often created too much friction. This could lead to false filament tangle detections and also generate annoying noise. After…

Pobrania
732
Polubienia
99
Ocena
5
P
PrintablesRaptorHunter

Pocket Hole Wood Jig use 688 Bearings or M8/M10 Nuts

3d printable pocket hole jig for woodworking, use high infill and thick walls to prevent part from buckling when clamping. You can use 688 Bearings or M8/M10 nuts as the drill guide. If you want to use nuts as drill guides use an High…

Pobrania
691
Polubienia
175
Ocena
4,5

MORE BEARINGS - Print in place - with real rolling elements

Remixed from https://www.printables.com/model/561588-bearings-print-in-place-with-real-rolling-elements For instructions please see original link. Added: - 6003 — 17/35/10 - 6204 — 20/47/14 I printed mine with a 0.20mm line height profile…

Pobrania
691
Polubienia
160
Ocena
4,5
P
PrintablesTheCubingJar

Spool-holder Ultra Smooth no Bearings

ULTRA-SMOOTH RUNNING SPOOL HOLDERS Notice: not my work (scroll down) I tried LOTS of spool holders here, but most of them either required screws, bearings or whatever. Most of them were also quite noisy so I found this one on Thingiverese…

Pobrania
680
Polubienia
34
Ocena
5
P
PrintablesEA3D

SKF 6000 series ball bearings

SKF 6000 Series Ball Bearing Archive

Pobrania
662
Polubienia
55
Ocena
0
P
Printablespetkata

Ender 3 V2 Neo axis stabilizer with BB bearings

Remix of https://www.thingiverse.com/thing:5606999 with "build in" bearing using 6mm BBs , adapted for Ender 3 v2 Neo. This can be printed in one go. Print Settings Printer Brand: Creality Printer: Ender 3 v2 Neo Rafts: No Supports: No…

Pobrania
643
Polubienia
89
Ocena
5
P
Printablesuepsie

Grease / lube injector with cap for LM8UU / LM8 / LBBR (8mm) and LM10UU / LM10 (10mm) linear bearings

After producing quite a mess while trying to grease my bearings, I quickly designed this injector for LM8xx and LM10xx bearings which fits on the original SKF grease tubes. Just slide it in carfully, press and rotate the bearing - done…

Pobrania
622
Polubienia
79
Ocena
4,86

Voron Horizontal Filament Spool Holder w/ 608 Bearings

I really enjoyed this spool holder is it prints very cleanly and does not require supports. I remixed this to use the mount from the "Voron v2.4 Sturdy Handles" as I like to mount my spool holder on the horizontal part of the frame and it…

Pobrania
620
Polubienia
105
Ocena
4,85
P
PrintablesMajsterkowo

Filament Spool Stand with Rollers on Bearings V2.0

Parts needed: 4x bearing 608 Maximum spool width: 110 mm Maximum spool diameter: no limit More info and photos: http://bit.ly/2poCEIN Best regards! Lukasz Print instructions Rafts: No Supports: No Resolution: 0.2 Infill: 30

Pobrania
616
Polubienia
55
Ocena
4,56
P
PrintablesRob W1RCP

Iambic CW Morse Code Paddles with Bearings and Magnetic Return

The paddles I've created differ slightly from the design that I Remixed. These paddles use bearings for less friction, and the return tension is created with magnets instead of a spring. I have uploaded a PDF with step by step…

Pobrania
578
Polubienia
49
Ocena
4,8
P
PrintablesRESTLESS DESIGN

Spool Holder Bearings

I've designed two bearings that you can slide on the stock i3 MK3S spool holder, since this design isn't working very well. The bearings are for ColorFabb 750 gram spools and for the spools that Prusa ships with their printers (I believe…

Pobrania
575
Polubienia
79
Ocena
3,67
P
Printablesimototakashi

Turn table: no motors and no bearings are required

A turn table for 3D scanning. No motors and no bearings are required. I used PETG. You can print all parts with standard settings, and you don't need to put support. Assembly Insert the bar into the base. The longer hexagonal rod is for…

Pobrania
570
Polubienia
85
Ocena
4,88
P
PrintablesJuraS

Spool Holder adjustable with bearings for Prusa i3 MK3S

Spool Holder adjustable with bearings for Prusa i3 MK3S Original spool holder (no printed double holder) delivered with original Prusa MK3S is not good for smooth unwinding filament. So I designed and created my own. adjustable for…

Pobrania
569
Polubienia
45
Ocena
5
P
PrintablesWorks

Parametric Ball Bearings (Print in Place)

PIP Parametric Ball Bearings Made in Ondsel(FreeCAD), change the parameters in the spreadsheet ( Bearing Data ) Parameters included: ID OD Width Ball Clearance Shoulder Diameter No. of Balls Chamfer Refer to the spreadsheet below: Insert…

Pobrania
557
Polubienia
67
Ocena
5
P
Printablestoomuchtuna

Prusa i3 MK2/MK3 Spool Holder - 100% Printed with Herringbone Planetary Gear Bearings

This model is a combination of two fantastic 3D models: Emmet's Herringbone Planetary Gear bearings and Martin Majewski's Spool Holder . The motivation behind this project was simply to remove the need for store bought 608 bearings. These…

Pobrania
540
Polubienia
102
Ocena
4,9
P
Printablesfifonik

Spool holder with 608 bearings for Elegoo Neptune 4

After creating the simple spool with sleeve for my Neptune 4 I always wanted to have one with bearings. I like HugoHuge's design , but it is too long and bulky, so not possible to use with 250g reels I have. Also, the design has to be…

Pobrania
539
Polubienia
98
Ocena
4,69
P

3D Printed Heat Set Insert Press – No Springs, No Bearings!

Tired of installing heat-set inserts crooked? I designed this fully 3D printable press to make installing threaded inserts easier, more precise and repeatable. The press features a parallelogram linkage mechanism that keeps the heating…

Pobrania
524
Polubienia
235
Ocena
5
P
PrintablesFloatingCam

Wall Mount Spool Holder with Bearings (Customizable)

A wall mount for spools that use the bearings and aluminum tubes from the MMU tray it replaced. I came up with this Wall Mount for Prusa Multiple Materials 2S Filament Buffer solution because I couldn't fit five Prusa Trays on my desk…

Pobrania
514
Polubienia
67
Ocena
4,8
P
Printableshypotesseract

Ender 3 S1 Rolling Spool Holder (6000Z Bearings)

This model is based on the Creality Ender 3 S1 Pro stock spool holder. Each part (tube, caps, shaft) is designed to be compatible with the original holder to allow for partial replacement or modification. Required Hardware This holder…

Pobrania
505
Polubienia
104
Ocena
4,88
P
PrintablesEA3D

SKF 6200 series ball bearings

SKF 6200 series ball bearings archive

Pobrania
492
Polubienia
54
Ocena
0
P
Printableseurad

Prusa spool holder (with bearings)

Centering spool holder with 608 bearings to be used with the original spool holder for the Prusa MK3S+. I have some TPU which sticks quite well to itself so I needed a spool holder which allows for super-smooth rotation so the filament…

Pobrania
474
Polubienia
87
Ocena
4,67
P
Printablesfuchsr

Filament Spool Holder with 608 Bearings for Prusa XL

I like my Prusa XL tool changer but don't care for the spool holders they included. This is a remix of @hugoG_253127's “Filler” filament holder to work with the hardware provided with the XL. By using 608 ball bearings, friction is…

Pobrania
468
Polubienia
71
Ocena
5
P
PrintablesVitamina 3D

Spinner for 608 bearings

Hardware required: 4 bearings 608 (Dext = 22mm;Dint = 8mm; h = 7mm). Layer height 0.2mm. Printing speed 50 mm/s. The caps and the bearings fit perfectly in each hole. However, you may need to scale the models a bit under 100%, specially…

Pobrania
456
Polubienia
31
Ocena
4,67
P
PrintablesHolzerMax

Bearing Blocks for 608 Bearings

It is a very simple model. It has a lip on one side for the bearing to rest against. Maybe you have to very slightly shim around the bearing, as I designed it for a slightly loose fit (at least for my setup). The screws might be a little…

Pobrania
448
Polubienia
99
Ocena
5
P
PrintablesAnimeted

Awesome Filament Spool Rewinder Printable 608RS2 Bearings

I tried printing the original bearings and couldn't get them to spin freely. So I found these bearings and adjusted them to the same size. I might try testing with the smaller bearings too, since these work so well and the design seems to…

Pobrania
447
Polubienia
43
Ocena
5
P
PrintablesDennis W

Neptune 4 Spool Roller Mod with 608 Bearings

Spool roller for Neptune 4. Should also fit for Neptune 3 and maybe other printers.

Pobrania
443
Polubienia
50
Ocena
4,44
P
PrintablesPrint4Gods

Spray painting turntable with 608 ball bearings/ lacquer Spray Painting Spinning easy and fast to print, 608 bearing

I have enlarged the painted turntable to 25cm as well as adjusted the foot. It is very fast and easy to print without support structure Thx @ https://www.printables.com/de/@Kahnindustries ich habe die lackier Drehscheibe auf 25cm…

Pobrania
434
Polubienia
63
Ocena
3
P

Central filament spool axis with bearings.

I've seen many of these around but haven't got 100% satisfied with them, so I designed my own version. It's very useful if you want zero friction on your spools. This fits with almost all common 1kg spools. It fits spools with internal…

Pobrania
430
Polubienia
50
Ocena
4,8
P
PrintablesMekCreate

MK4 Z-Axiz 608z Bearings

Just a small upgrade to make the Z-Axis more stiff by adding some bearings on the top part. Before and after Version History V1.2TH Same as V1.2 but added through hole on top, so it will be easier to get the bearings out again. V1.2 Added…

Pobrania
429
Polubienia
111
Ocena
4,63
P
PrintablesMat3D

Flashforge 5m Spool Roller With bearings - Frictionless

This is a modification of the roller model that is provided by Flashforge in the part files found on their wiki page. I modified it to work with HugoHuge's universal roller. So the roller and roller guide are directly from him. I only…

Pobrania
426
Polubienia
66
Ocena
4,67
P
PrintablesXVIIarcano

Adjustable pressure clamps for Hadley telescope altitude bearings

These are spring loaded clamps for the “standard” plastic frames and tubes base included in the official Hadley telescope model and its metric remix version . The clamps are based on M4 hardware left over from my metric build, but will…

Pobrania
418
Polubienia
47
Ocena
4,8
P
PrintablesBryce_Abery

Bearings

Print and place bearings

Pobrania
413
Polubienia
25
Ocena
5
P
PrintablesMarSzal7500

IKEA Skadis- 608 bearings dispenser- no supports

A dispenser for twelve standard 608 bearings compatible with the IKEA Skadis perforated board system. When printing, it is recommended to use a gyroidal infill and lower print speeds to maintain maximum precision, so that the bearings do…

Pobrania
411
Polubienia
137
Ocena
5
P
PrintablesMiChAeLoKGB

Gridfinity 608 Bearing holder (22 bearings)

I liked the original model, but I wanted it to hold at least 20 bearings instead of 18. I managed to squeeze in 22.

Pobrania
406
Polubienia
43
Ocena
4,9
P
Printablestomi3d

Hamster Wheel (with bearings)

All parts can be printed without or very minimal support. Printed part list: Wheel Leg - Right Leg - Left Base - Back Base - Front Arm x2 Seeger - Small x2 Seeger - Large x2 Other parts: M3x12 screw x6 M3 nut x6 Ball bearing x2 (inner…

Pobrania
403
Polubienia
58
Ocena
4
P
PrintablesMRLeach85

Creality K1 Max - Top Spool Holder w/ bearings (for printing TPU)

Top mounted filament spool holder. Used for printing TPU on a K1 MAX. The adapter rings are a press fit into the original side supports to adapt them to fit standard cartridge bearings. The spool roller should be a slip fit into the inner…

Pobrania
403
Polubienia
40
Ocena
4,67
P
PrintablesHitcha

Print In Place Ball Bearings

These print in place bearings take 23 minutes and can be printed to understand the engineering and how ball bearings work or they can be printed for a fidget toy! https://youtube.com/shorts/-sOsR-bVKwU?si=yNJgMYLl0p9agQ27…

Pobrania
392
Polubienia
40
Ocena
5
P
PrintablesZRNNN

Peristaltic Pump _ Nema 17 _ 608 Bearings

as i only had 608 ball bearings, i created my own peristaltic pump. It is to be used for dosing fertilizer solutions in the hydroponics sector, but will certainly also work in other areas. - All the screws required are M3. - The silicone…

Pobrania
391
Polubienia
41
Ocena
0
P
Printablesjnull

Grease / Lube Injector for LMU8 / LM8UU bearings with Cap

Little helper to inject grease into Misumi LM8UU and LMU8 bearings. The injector is designed to fit Nigrin 74145 multipurpose grease, which is one of the recommended lubricants for mentioned linear bearings. The thread size is M24 x 3 I…

Pobrania
388
Polubienia
53
Ocena
4,89
P
PrintablesShenaniganz

Gridfinity 608 Bearing Tray (48 bearings)

I bought a 50 pack of bearings on Amazon, and needed a larger gridfinity bin to store them. 2x3x3u high. Obviously does not stack in this configuration, but I've included STEP & F3D files if you'd like to modify it. I used the Fusion 360…

Pobrania
386
Polubienia
54
Ocena
4,93
P
Printables-INSOMNIAC-

LACK V2 Spool Cylinder (for MMU spool holder bearings)

Simply the original cylinder, but modified to accept the 22x7 bearings from the stock MMU Spool rollers. Put Supports on Buildplate / Paint on support for the lower bearing space. And keep the original print instructions in mind.

Pobrania
383
Polubienia
67
Ocena
4,92
P
PrintablesFEW

8mm & 10 mm Grease Injectors for 3 oz Superlube (mk3s & 3018-pro desktop router bearings)

Superlube 21030 works great for 3D printer bearings. I want to put some into my Sainsmart 3018 pro desktop router, but the bearings are 10mm inner diameter, 30 mm length (and 58 mm length). I remixed the LMU8 bearing injector to fit a…

Pobrania
382
Polubienia
43
Ocena
5
P
PrintablesKhang

Sovol SV06 Filament Spool Roller 608-2RS Bearings

I did an e-steps and flow calibration before this. The orientation of all the parts I printed is how it is shown in the STL when you load it. It doesn't matter how you print it but here's how I did mine: Barrel and roller with normal…

Pobrania
381
Polubienia
71
Ocena
4,88
P
Printablesthomergil

Wall Mounted Filament Spool Holder with Ball Bearings

This wall-mounted spool holder is smooth, quiet, and easy to operate. It utilizes 6001-2RS ball bearings —two for each spool mount. Print at 0.20mm layer height with a 0.4mm nozzle, or at 0.3mm layer height with a 0.6mm nozzle. No…

Pobrania
371
Polubienia
84
Ocena
5
P
PrintablesPrismaPrints

Functional Bearings Print in Place (608 - 6004)

A collection of functional print in place ball bearings of different sizes. Once you break them in properly, they can be used in light/medium load application = low grade robotics, filament holders, fidget spinners, RC vehicles, etc.…

Pobrania
366
Polubienia
32
Ocena
0
P
PrintablesDiplomator

Spool - Rewinder Axle with Bearings

UPDATE: lots of Users hate me for that very Bad design, i am so SORRY for my really Bad design. -i am a beginner in CAD and really a NOOB, sorry for that →hopefully there are some Professionals who can make a better design out of my bad…

Pobrania
354
Polubienia
49
Ocena
0
P
Printablesquibeck

No Bearings, No Glue Triple Gear Spinner – Japanese Luck Phrase Edition

The No Bearings, No Glue Triple Gear Spinner is a mechanical fidget built entirely around gears — no bearings, no adhesives, no extra hardware. Three helical-toothed rings — two in red, one in black/grey — interlock into a spinning knot,…

Pobrania
352
Polubienia
176
Ocena
5

3KG Spool holder (no bearings)

A model I quickly made inspired by a spool holder I saw in a photo way back. Super simple to assemble, and is a relatively quick print. I made two versions of the top rail. One of them has a 4mm groove to slot in a PTFE tube to create a…

Pobrania
351
Polubienia
19
Ocena
3

Self-Balancing Rolling Robot with bearings and counterweight

I love what @Judhini_1605028 did to create the original model. It was just too difficult to get it to roll smoothly. I added bearings and a counterweight. I like to create 3D models that follow these criteria: Do not require supports – I…

Pobrania
343
Polubienia
134
Ocena
5
P
Printablesjurassic73

Press-fit Fidget Roller w/ Bearings

This is a fidget toy that uses 608(typical skate 8mm x 22mm x 7mm) bearings. You can buy the cheap ones for this application. This is not load bearing like a skateboard or scooter. There are cheap bearings on Amazon for down to 20 cents…

Pobrania
338
Polubienia
58
Ocena
4,71