150 modeli
This adapter allows you to rack (19") network elements of the TP-Link manufacturer, more precisely the OMADA business range. Unfortunately the manufacturer has not planned to be able to rack this equipment via holes and brackets, many…
Wydruk około 3,18 €–3,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Maturity: Very good. 8 prototypes. In use since 2024/04. Personally I fixed my charger with some double-sided tape inside the charging station. Accept charger with the sizes: Up to 150x30mm Up to 75x40mm Slot space is 21mm. Printing…
Wydruk około 27,74 €–33,90 € nettoWstępna wycena jednego wariantu
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
This is it, this is what I have been focusing on for the last month. the system is done, I am not making anymore adjustments at all. There will be more mounts there will be more options but tis is the base system in its glory. Hi I'm…
You may have several laptops or other electronic accessories. Here is a vertical multi devices stand to optimize your space on your desk. This stand can old at least 3 devices. The parametric design is attached so you can generate your…
I recently renewed my network setup at home with Unifi devices. That included Unifi Gateway Ultra, Switch Lite 8 POE. At first I stacked them on each other but it would have bad effect like thermal issues and also not good in terms of…
Overview: This enclosure is designed for outdoor solar nodes/repeaters to be hung from tall objects such as trees, giving users the ability to place their nodes at higher altitudes on their property when they don't have the ability or…
I got the inspiration for this project from an excellent video by the ingenious Robert Murray-Smith. I implemented the electronics exactly as described there - except that I also added a voltage regulator. This small handheld generator…
Print this on any printer without supports File contains left and right side riser support that I used to increase the tilt angle of my laptop. This would also be useful to tilt any similar flat device such as a keyboard or tablet etc.…
I made this mount for my Wahoo Element Roam. I think it should also work with Garmin and Hammerhead devices, it would be cool, if someone could try this out. Best print in the same orientation as you would apply to the bike, so the 2…
I print these in PETG. The tap rack training aid is printed standing up.
This was inspired by Zack Freedman's Gridfinity project. I wanted to be able to store some of my frequently used USB devices (USB-A or USB-C). I mashed up a couple different objects together to make this 1x2 bin that will hold 4 different…
Object description Handlebar Mount for Garmin Devices or Compatibles. The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be…
The official cleaning manual tells you to use new screens every time you clean your device. This seems very wasteful, in my opinion. Trying to bend the screen by hand is imprecise and can land you a new, unintentional piercing. I've…
Object description Handlebar Mount for Garmin Devices or Compatibles. The parts fit directly to a bar diameter of 35mm. For smaller diameter, you can find an adapter in the folder “Optional Parts”. The flat adapter is intended to be…
A box for Analog Devices Adalm-Pluto SDR with "Clock in" SMA connector for external Clock source. In near future there will be diffent bottoms of this box with USB holder, mounts to tight this box down. If a change is needed to this…
Use your Ryobi 18V lithium battery to power… anything! I designed this to power my Garmin Striker fish finder on my kayak. Print in PLA at 50% infill for strength. Supports are not needed. Use two short lengths of desoldering braid for…
This is a dummy model for sizing the new Core Devices Core Time 2 to get a feel for the fit and what straps go with it. This model IS NOT perfectly accurate. However, it is close, likely much closer than 1 mm of all dimensions. This model…
Update: This is for Heltec ESP32 LoRa boards and an 18650 battery. Since I've been working with other boards, I have switched my development efforts to a more universal style “radome” for GPS/LoRa/Meshtastic/RAK WisBlock style devices.…
Printed in PETG but PLA fine. Designed for M4 Inserts and M4 Screws but M3 work in both cases. Used 0.6 nozzle with .3 layer height. No supports needed.
I noticed that if I positioned my Ubiquiti Unifi USG router and my POE switches (US-8-60W and US-8-150W) vertically on some stand, the cooler ambient air got inside them and moved upwards thus cooling the devices naturally. This small…
I've developed these straightforward brackets to mount 19" rack devices vertically onto walls. My design stands out by creating a small air gap between the device and the wall for improved ventilation. The fully parametric Fusion360…
Migrating from thingiverse https://www.thingiverse.com/thing:4362267 Remix the large one to be able to hold thicker devices, especially the ones with a case on. Original here https://www.thingiverse.com/thing:3146835 gap for the devices…
Its a simple model of phone holder to keep 4 of my devices 1 kindle, 2 phones and 1 tablet near my bed side. Lying down and easy to charge with cables. I had slight issue with bed adhesion but overall its very functional. May need some…
This is a model that allows you to charge up to 4 USB devices simultaneously off a single Ridgid 18v battery. It requires a Ridgid replacement switch that I bought from HERE . 2 Makerhawk DC-DC USB boards from HERE . 4 M3 x 10mm screws…
These are some designs I use to encase my Shelly Plus devices in various fixtures like floor lamps, children's lights, and device switches. These models can accommodate all flat Shelly devices, including the Shelly Plus 1PM, Shelly Plus…
Two versions available. Print it solid, or print without top & bottom layers & an infill to suit your style. Uses the USB-C nomad style charging dongle sold by Core Devices. Will not fit the old style Pebble Corp charging cables. V2…
Gridfinity 1x1x2 for 10 small usb devices. Can also fit 6 medium size usb sticks. The fit for the USB plug is no snug but not loose either. I have one USB plug that is a bit thicker than the others, that one fits but its a bit tight. No…
Mount designed for: Dell Wyse 3040. PoE adapters can be used with attached switch Additional components needed: 2x 6/32 grub screws, ¼ inch for securing the devices in the print additional components needed for other half of rack 6/32 x…
Up to now, there were only component lead benders for through-the-hole components. Using your 3D printer, you can have this now even for SMDs, making manual prototype assembly or component-level repair of SMDs much easier! All SMD…
What's this? Stand up devices between 10 & 35mm thick with this adjustable laptop stand for your desk! This remix takes Lukki15's awesome laptop stand and modifies it slightly for printability and other improvements. Background Lukki15…
A part of RMIT Major Project. Hi everyone! this device is intended to be the first of a family of product developed for the purpose of aiding daily lives of people with mobility impairments, specifically arthritis. This project especially…
Update If you use the osVAC system, have a look at the similar osVAC compatible adapter I made that you can use to connect Bosch Click and Clean devices to the osVAC system here:…
Holder Bar Clamp GPS/Devices Customizable - for Ø12-14-22 mm Bar Dimensional data: 60x60mm (18+18mm) 4 Holes M5 18 Holes M4 Update: 18/08/2025 Added Rev1 Models
2-way and 4-way 22mm connectors to permit ventilation of multiple patients on one ventilator Print instructions Prints quickly and without supports in up to 0.3mm layers in both PLA and PETG. I'm working on a flow restricting valve (in…
PETG or ABS, 2-3 wall thickness and little infill, I have used 20%. Use two ¼" screws, max 3mm heads.
Just simple case for rpi zero, Sony IMX219 sensor and AR9271HP WiFi card. Category: R/C Vehicles
The knob is friction-fitted on the original knob, no need to modify your device. ⚠ Extending the knob increases the risk of damaging the original encoder when dropped since the knob is protruding over the edge of the protective corners.…
Universal Wall Mount for iPad, Tablet, and Surface Devices Keep your devices secure, accessible, and stylishly displayed with our versatile wall mount. Designed to fit most iPads, tablets, and Microsoft Surface models, this mount is…
Nozzle 0,2/0,4 (0,2 recommended) 100% infill, or print as a solid 0,1 First layer 0,15 the others I printed with polymaker's polyterra in orange at 215° 50mm/s overall It fits any 6 series recorders from Sound Devices, it just snaps in…
This model holds five USB devices to put near your desk or anywhere. It accepts lower profile USB flash drives, wireless USB dongles, and others. It features rounded edges and no supports or brim are required.
PETG - for strength and flexibility in the clip 100% infill - for strength in the clip Tree support for the clip + upper arc. -- A20 is secured with 2 countersunk screws (2,5x8mm), remember to remove small Allen set screws first, there’s…
PETG 100% infill Probably won't fit any other combinations than 888 + K-Tek Stingray Small X Use this instead of the velcro (I have cut it off) - for more room on the sides, a more rigid frame, and a fixed location of the 888.
Edit log: Date: 05.10.2025 | First Upload So far, whole rack is designed for 250x250x250 mm beds on the 3D Printers. In the future I will upload version for 180x180 mm beds, especially for A1 mini fans ;). Date: 05.11.2025 | First Upload…
A stand for up to four handheld scanner or two-way radio devices with a belt clip, based on my other model for one device. No supports required, I printed with PLA+, 15% infil. There is a single device version here , and a three device…
Devices which need screws in a wall to mount on, but it is difficult to place them? For small electric devices/computer accessories like home routers / gateways / CPE small network switches battery chargers Requirement to be usable, it is…
Made a longer case to make more room for the electronics. Also features a built-in usb buck conveter (see last picture, not sure what it's model is) slide-in mount. I only provide the alternative variant of “ Case_Bottom.stl ", other…
This print was designed to embed one ¼" Ruthex threaded insert and two M3 Ruthex threaded inserts.
Device organizer, holder and charger in one part. Can be printed with or without Apple Watch charger stand (Device_organizer_and_charger_whatches_stand). Glue watch holder to the main part, if needed. The two parts must be printed with…
Gridfinity 1x1x2 for 5 small and 2 big usb devices. Sometimes USB sticks are just too big to sit next to other usb devices or they stick out over the edge og the bin, so I made room for 2 big ones next to the row of 5 small. The fit for…
I designed this charging stand to be used with an off-brand magsafe wireless charging puck from Xtreme Power for both the phone and earbud chargers , though the earbud charger doesn't need to be magnetic. This stand should work for any…
I am building up a storage server for my classroom, and have a bunch of old spare parts. I needed something to convert from 3.5" drive bays to 2.5" drive bays, but.. supporting two. This is what I came up with. Note there are a bunch of…
It's not just their people that need a helping hand - assistance dogs also need help manipulating an environment not designed for them. This starter kit includes a light switch paddle, a doorknob puller, and also a unique set of scent…
Mount a dashcam or electronics in your Toyota vehicle's front windshield using only the stock mirror bracket. No suction cups or drilling required! This mount securely attaches directly to the existing bracket built into windshield. The…
To store some bike accessories at home, I wanted to have some kind of Garmin/Quarterturn mount for a cabinet or wardrobe. While it's difficult to print a whole Garmin mount with its undercuts, i figured out that having just the bayonet…
Stand to hold iPad, laptop, notebook devices. Included models for 2, 3, and 4 devices. The Autodesk Fusion file source will let you adjust the size of the slots and the number of devices. I printed using PLA with 0.6mm nozzle, 0.20mm…
Parametric shelves for rack-mounting non-rack items in a 2U 19" space. The parameters can be customized in Fusion for length, width, height, and beef (plate and shelf support thickness). Customizing some parameters past their limits will…
Had to make ears for an earless 1U Behringer device I had. Also made 2U because why not 1U fits Composer Pro-XL MDX2600 and Powerplay Pro-XL HA4700 2U fits Ultragraph Pro FBQ3102 Likely they fit some other Behringer devices, these are the…
Hier ein Modell für verschiedene USB Geräte, wie zum Beispiel USB Sticks, Micro SD Karten, SD Karten und zwei Fächer für Kleinkram. Gedruckt in PLA, keine Supports oder Brim nötig.…
Print this, its OK. Lowers FPS quite a bit, but no darts got stuck in my testing. It uses 4 m2 x 6mm screws (I used button head). Use at your own risk, like i said, its ok, but not great. :D
Gridfinity 1x1x2 for 3 big usb sticks. I have some old and oddly Chunky usb dongles, they wont fit if they are too close to other usb thingies, so I made this special holder for 3 of them. The fit for the USB plug is no snug but not loose…
Wall mounted holder for mobile devices - makes sure that they dont fall down during charging process ;) Print Settings Printer: myPrinter Rafts: No Supports: Yes Resolution: I used 0,15 Infill: 15% Filament: any brand you like ASA, PLA,…
This is an angled desk stand for the Mixpre-3 to set on. You can stick anti-skid rubber on the flat parts if you wish. Print Settings Printer Brand: Raise3D Printer: Pro2 Rafts: No Supports: No Resolution: 0.2 Infill: 100 Filament:…
Don't you know how you install a new lamp in your dinig room and while fixing the cable, the tiny relief clamp breaks? But thats why we have a 3D printer, right? At least thats what I thought and so I designed a parameterizable bracket…
I couldn't find a flash drive holder that met all my needs so I made one myself. If you print it, please share a make! Recommended Settings: 0.3mm Layer Height 15% Grid Infill
I printed this cable winder in TPU and stuck it to the notebook power supply with double-sided adhesive tape, as in my example. The clip in the middle is designed for a normal cold device cable with TPU. If you use a different cable type,…
This is the results of a challenge I gave myself - create a robot with as many articulated joints as possible that prints in one piece with no support and no infill. I needed to build columns into the model to support the front of the…
A stand for up to three handheld scanner or two-way radio devices with a belt clip, based on my original model for one device. No supports required, I printed with PLA+, 15% infil. The single device version is here , the four device…
It holds storage devices like USB thumb drives and sd cards. 2X bigger than my last one.
Update - various angles now available! Description This is an adapter to connect any Bosch device with the Bosch-specific Click and Clean vacuum socket to the osVAC system. I made it for the Bosch miter saw GCM 8 SJL, but it should also…
On the Bambu Labs X1C Carbon, to reach the rear lead screw to clean it. This uses a toothbrush for deep cleaning
This is a cover for Makita 18V akku devices Print Settings Rafts: No Supports: Yes **Resolution:** 0,2 Infill: 25 % **Filament:** any PLA Category: 3D Printing
Gridfinity 1x1x2 for 5 small and 4 medium sized usb devices. I moved the 5 slot row for small devices closer to the edge to make more room for the 4 devices in the 4 slot row for medium USB devices. The fit for the USB plug is not snug…
Nintendo released Game and Watch devices with either Mario or Zelda as the main game. While they are fun, they're nostalgic and look good hanging on a wall as well. These wall mounts are specifically designed to be super easy to slide the…
Can be printed without supports. Infill 20-30%. Can be used for a lot of devices, I added extra space for easy slide in / out, the device will stay with a little angle for easy grip. Wall mount with 4 screws. Fits iPhone, Android Phones…
Collection of RK 62 M2/M3 muzzle devices for airsoft use: -Tri lug flash hider for airsoft 14mm ccw, acts as QD mounting point for other devices and "Crown" thread protector for it. -Three peace silencer: Base, Can and Baffle, 44.5mm wide…
As everyone in a mobility device knows, everything you really want in a grocery store is on the top shelf. I am not a fan of grabbers because they are too big and cumbersome and often provide poor grip. I like to simplify the problem so I…
When designing electronics, the enclosure plays a crucial role that is often overlooked. In addition to protecting sensitive components on printed circuit boards (PCBs) from dust, moisture, and physical damage, an electronic enclosure…
Want to make one for yourself? Check out the full build guide over on my blog! This past year I have become *completely* obsessed with HomeAssistant, adding a number of sensors and smart products all over our house all controlled through…
A friend of mine asked me to design a print a belt support for its Edge Garmin GPS. The belt is 4cm wide, and this design fits perfectly. It is required to buy a Garmin adapter by separate, such as this found at Aliexpress…
** Update 2020-07-21 ** I added a "shelf" part that mounts onto the stand and holds a phone (or other thing). It has been very handy for setting my personal phone between my two test devices. ** Original description ** (Part of) A…
The Sidecar for Psion is portable PPP modem and linux terminal for RS232 devices powered by a Raspberry Pi Zero. Required: Raspberry Pi Zero Pimoroni Lipo Amigo Pro Pimoroni Lipo Shim for Raspberry Pi Lipo Battery 2200mAh PiRS232 Board…
Very simple 3 pieces stand for organizing multiple devices and cables. One cable for on device :) Connect the upper and bottom parts with double side tape.
Measurement device for measuring if robots in the RoboCupJunior Soccer competition “swallow” too much of the ball to make sure it is always possible for opponents to recapture the ball. See https://junior.robocup.org/soccer for details…
Wanted a vertical stand for my devices. So I made this. The 15mm fits a Surface Pro 7 with type cover, and the 18mm fits a Macbook Air M1, Surface Laptop or Laptop Go. Print this at infil > 70% else it will crack. You will also need…
Authors: Jackson Romelli, Lillie Orians, Anna King, and Gregory Macke These assistive devices were developed to attach in the grip of the J-hook of the EnableUC Body Powered Hook Version 2, were they could hold common objects to…
With this jig you can use your knive sharpener also for sharpening chisels. I use a TSprof Kadett though other devices like this should also work. The 3D has two slots (16 and 6 mm) for holding and aligning two sizes of chisels. If yours…
Use 16mm threaded push switches which are available in different colors (f.ex. https://de.aliexpress.com/item/1005003400929705.html)
Not the sexiest of all things but functional. I threw it together quickly to mount a Logitech C920 that I had around. Print the things; no supports needed. If you're using the two printable fasteners instead of the real metal things, make…
Basically a case for the FakeTec v4. I've yet to try other revisions. Its spacious inside, no cable channels etc. Use whatever cable or wire you have, big or small gauge, throw all the stuff in there, solder it together and boom - super…
We designed models for devices that can assist people with arthritis. The Mouse Holder and Wrist Support allow for a better more comfortable use of computer mice. The openers allow for an easier time opening jars/bottles/cans without…
Replace plug cover forOBD 6-pin with a hle passthrough for cable that activate a device on your motrocycle
I wanted a stand to charge my new Pebble 2 Duo, but the watch only came with a USB C -> Pebble adapter dongle. This stand fits the dongle and turns it into a proper stand for your watch! There's both a double-leg version, and a single leg…
PSU Mount for SanDevices e682 Controller There are 2 versions available. MW LRS 350 - Fits standard Meanwell/Generic PSU's MW LRS 600 - Fits thin Meanwell LRS 600 PSU's The design has a in-cut on the bottom to allow for nuts/bolts to rest…
Well I just realized my caliper is running out of battery and it uses a LR44 battery. I only have LR41 batteries on hand, so I designed this. This should work for all LR44 devices with side pole contact. Feel free to visit my github page…
It's a stabilizer that clamps around the bottom of a 1U device such as a network switch. Most applications will require you to print two per device for stability. Indentations on bottom and between uprights are for non-slip pads. I use…
Wall mounted holder phones, tablets, powerbanks and remotes. The tablet in use is the iPad mini. I don't think full size tablets will fit. Print using 0.6 nozzle, 2 wall no infill.
This is a bracket for 19 inches rack mount devices. You will need to print each file two times. You will need the following hardware to attach the bracket on the Ivar side unit. 8 x 8-32 2.5 inches bolts 8 x 8-32 nuts 8 x washers for 8-32…
3 Device Holder for HoneyComb Storage Wall Fits walls with the top of the honeycomb being horizontal supports on the honeycomb pieces I used auto tree in orca slicer and they where fantastic bambu studios auto tree doesn't extend to the…
