312 modeli
The Fysetc usb c input shaper devices work amazingly and are super cheap; just plug and play with no fussy wiring. I wanted a way to mount these solidly to the SV06 for measurements without using too much plastic. Came up with these…
Wydruk około 0,48 €–0,59 € nettoWstępna wycena jednego wariantu
This electronics box is a resize of the original Einsy base and doors models to fit the Fysetc F6. I have an old Prusa MK2.5S clone with a Prusa Bear frame, and works with it like a charm. For the original frame the upper holes have to be…
Wydruk około 2,22 €–2,72 € nettoWstępna wycena jednego wariantu
Made this remix of the Rainbow barf LED carrier to fit the FYSETC variant. The FYSETC variant doesn't have a notch in the PCB and the connector takes up more space than the original design accommodates. The original file, including the…
You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación Click to danate Update 28/10/2023 Version fysetc portable input shaper Update 01/04/2023 Version Heat inserts for adxl Bill of materials Fysetc…
FLSUN V400 FYSETC Portable Input Shaper Mount A longer screw is needed to fix it.
FLSUN Super Racer FYSETC Portable Input Shaper Mount. Needed: 2x M3x10mm Screws to fix Portable Input Shaper to the mount 1x M3x10mm Screw to fix support on Super Racer 1x M3 Nut to fix support on Super Racer Configuration for Klipper:…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered Y Axis captive mount for the Fysetc Portable Input Shaper ADXL345 USB C Accelerometer bed mount. It's designed for ANY PRINTER with a PEI…
This is a work in progress project from my side, so there might still be some small bugs. I made a custom version of the new archetype blackbird toolhead for my needs. I have created a new core for my needs, to get use of a bambulab…
Permet de fixer le ADXL345 Fysetc comme la sonde de nivellement. Fonctionne pour la V400 et la SR. Prévoir un aimant de 10x20x3mm (moi j'ai simplement coller l'aimant, mais j'ai prévu un trou pour le visser) et 2 vis M3x8 pour fixer…
Use for mount Fysetc spider on DIN rail. Additional requirement 2 pcs of "pcb_din_clip_x3.stl" printed part 4 pcs of M3x8 SHCS 4 pcs of M2x10 Self Tapping Download "pcb_din_clip_x3.stl" from…
Fysetc Spider Stepper Driver Cooling. Tests with versions 2.1, 2.2, 2.3 and 3.0.
Hello to everyone who has chosen a Prusa MK3S Clone. The parts that I have put together differ a little from the original MK3S, but this compensates for the few weaknesses. I bought the MK3S from AliExpress and had to find out that the…
X- and Y-axis mount for the portable input shaper. Y-axis mount should fit on bed with thickness of 4 mm. X-axis: depending on your fan: 2x 24 mm M3 bolts. Y-axis: 3x 16 mm M3, 2x 10 mm M3, 3x hex nuts M3, 2x M3 square nuts Print in PETG…
A simple mounting bracket for mounting up to two 3010 axial fans to you Fysetc CNC Bed. Featuring threaded inserts for securing the fans and mounting and a cable run hole in the centre to keep it all tidy. plus a new connection block…
If you have Umbilical Mod, you probably saw you are not able to mount an input shaper where it's supposed to be attached. Worry not ! This mod will help you doing your input shaping on the Voron V0 ! There are 2 files here : a miniSB…
Case for a Fysetc E4 Onstep telescope controller. I only need 2 motors, but include the model so you can add up to 4 I printed using a 0.5mm nozzle, 0.3mm layer height using PLA+. I recommend no infill on walls and 3-4 layers top & bottom.
The CNC aluminium bed of the FYSETC Voron 0.2 moves quite a bit in stock configuration so I designed spacers that keep the screws and springs centered. Make the bed way more rigid and reduces print artifact.
4x Heat Insert M3 2x M2x8 screw 4x M3x6 Screw Used with Voron pcb_din_clip Print settings: 3 perimeters 10%infill
Fysetc Portable Input Shaper mounts for Elegoo Neptune 3 Pro/Plus/Max head and bed. Use M3 screws to secure the mount to the bed or the head.
Fysetc mini 12864 case Material list 4 units Insert Nuts M3 L3 4 units Screws M3x10 DIN 912 Lista de materiales 4 uds Tuercas insertables M3 L3 4 uds Tornillos M3x10 DIN 912 Updated version / Versión actualizada : Front Cover Rv02 The…
Firmly hold hex M3 nuts in their place inside the aluminum extrusion — now for the Fysetc Voron V0 kit.
edit 29.12.23: Added angled and flush USB side for cables with big connectors. simple remix to mount a Fysetc UCAN v1.0 to a Din rail. Uses 4 m3x6mm BHSC. Fusion360 archive included if you want to add the whole assembly to your design, or…
This is a mount for the FYSETC USB ADXL345. It mounts easily to most Ender 3's and its clones (I am personally using this on a Voxelab Aquila). It mounts easily and securely to the printer by sliding it firmly onto the X and Y Gantry.…
Introduction The Fysetc Spider is pretty new to the market and usually used for the fantastic Voron printer builds. I want to use it for my Creality and Sunlu Printers, so I build a maker-friendly compact case, which can be screwed in and…
Helps add more rigidity to your bed, by supporting the bed springs. Printed mine in PCCF just to be safe.
This is a Prusa mini 3.2-inch display box, to apply the FYSETC Prusa mini 3.2-inch display. The display box from FYSETC was hiding a bit (1mm left and 1mm up) of my screen. To solve this, I moved the display 1mm up and 1mm to the left.…
The 12864 Mini Display v1.0 from BigTreeTech is a clone of the Fysetc 12864 Mini Display V2.1 . There are a few cases on Thingiverse which look nice, but weren't able to attach the display on the left or right side of a 2020, 4040 or 4020…
Wanting the Sweet CNC bed from Fysetc but also wanting that Sweet Stealth Look on the front with the Voron Logo from Maple Leaf Makers? Well this might just be the mod for you. after adapting the stealth front to cover up the CNC bed…
instead of putting the input shaper in the front of the extruder, this one is attached to the supports legs that hold the magnet for the bed level sensor. makes it more esthetic. features: fit for - fysetc input shaper (support ears needs…
Great original design, big thanks to Somnium & Bounet for also posting a Step file :) Just modified the hole location for the pin connector to match with fysetc lcd. Hope you like it.
Here is a snap-together case for the FYSETC E4 board with the built-in antenna, since I couldn't find one. The top was designed to attach a 4010 fan on the outside. Also, take care when you're snapping the top on, as the tabs are a bit…
This is a simple remix of the current (R2) version of the original Prusa design. Designed for the 3.2" clone display from FYSETEC. I dient like the already existing remixes cause they never had the right openings for the display so you…
Mount for the Fysetc Spider 2.3 board for Rolohaun Design's Kappy printer: https://www.printables.com/model/625544-kappy
FYSETC Spider v3.0 stepper driver fans cooling mount. 3 x 4010 fans 3 x M3x40mm SHCS 6 x M3x15mm SHCS 6 x M3 threaded inserts
My V0.2 was having issues with it’s cable coming lose and causing interruptions mid print. This is my solution to try to fix this problem without replacing anything. The goal is to keep the plugs from moving and letting the cables do all…
FYSETC PIS Nozzle Mount. I have only tested on the VzBot printhead with a Mosquito Magnum. It should be ok for EVA as well. https://github.com/FYSETC/FYSETC-PortableInputShaper?spm=a2g0o.detail.1000023.4.5bbd54b4WUANUD
After setting up the Umbilical mod on my V0.2 Voron, i realized i don't have place for the PIS. The mounts that i found were all either fixed with screws, too small for the newer MiniSB, had the USB port on the wrong side, or were just…
Other models used heat set inserts and I did not like operating the soldering iron over my bed for something that is one time use and trash.
This is the nut bracket used to screw the XY joint and Fysetc's CNC gantry together. To assemble you need: 6x M3 hex nuts Print Settings: Material: ABS Layer height: 0.20mm Supports: no Perimeters: 3 Notes If the bottom nut dropping off,…
Simple mount for a fysetc UCAN module used with voron trident din clip (https://github.com/VoronDesign/Voron-Trident/blob/f871f117cdf2a3b3881c3b) 2x M2x8 screw 4x M3x6 screw M3 screws should be able to thread straight into the print…
Introduction The Fysetc Spider is pretty new to the market and usually used for the fantastic Voron printer builds. I want to use it for my Creality and Sunlu Printers, so I build a maker-friendly compact case, which can be screwed in and…
Helps guide the backplate on to the CNC shuttle. Built in supports can be removed by pinching the part and support together. Attach with 2x M3x6 BHCS.
If you like this model and use it please upload a like, it really helps others find it! I wanted to use less plastic, verify it was v2.0 of ERB compatible and convert the ERCT to use the new fysetc ERB v2.0 which lets me expand to 12…
I bought a FYSETC MW Power Supply LRS-350-24 for my MK3 clone , but they sent me the Bear Prusa version , and the adapter they designed was very fragile. So, I redesigned it , making it more robust and stronger . I have also made all the…
…Please be sure to hit like & post a make, I'd love to see your prints! Mount Fysetc Portable Input Shaper USB C Accelerometer on your SV06/+ Use 2x M3 heat inserts & 2x M3 5mm bolts for the accelerometer & 8mm M3 bolts for attaching to…
what you need for the conversion: FYSETC Prusa MINI Dual Drive Extruder 14-17€ Prusa MINI Filament Sensor ⬇alternatively⬇ 13-15€ Filament Sensor KIT version 5-6€ 1x M3 *8 screw for FYSIFS_fsmodule 1x M3 *12 screw for FYSIFS-fs-lever You…
Fysetc ERB v2.0 mount for TradRack.
I designed this case for the FYSETC E4 in Fusion 360 so that it can also house the BME280, with its temperature/humidity sensor facing outwards for more accurate ambient readings. I also added a physical mount for the DS3231 RTC, so it…
I needed a basic screen for an Ender 5 I had just rebuilt, and the BTT Mini 12864 LCD Screen looked like a good option. So I went ahead and ordered one, but then I needed an enclosure and mount for it, and this is what I came up with. The…
I liked the idea of a nozzle mount that didn't require removing the nozzle to fit the PIS, so I made a version that works for standard v6 nozzles with a 7mm hex profile. Print settings I recommend using a 0.4 mm nozzle, 0.2mm layer…
Fysetc Spider mount for the Voron Switchwire 3D printer. Uses the same dimensions as the spec SKR Mini E3 mount so the BOM hardware will not change. (4x M3x8mm, 2x M5x10mm)
02/09/24 - Rev 1 (GCode Only Change): This is a slight change to start the wipe cycle at Y-1 vs Y-9 which essentially just reverses the order it occurs in in the Y AXIS, as I noticed the move directly to Y-9 was pretty loud. This calms…
Please note, this design was made to fit the Fysetc verison of the 12864 Full Graphics Smart Controller. I designed this because it is a slightly different form factor than the original model. I'm removing WIP status as it works. It's…
The mount is made for a FYSETC Protalble Input Shaper (https://www.fysetc.com/products/fysetc-portable-input-shaper-with-rp2040-upgraded-3d-printer-parts-support-klipper-for-voron-2-4-0-1-trident?variant=41865925001391) to fit on an Sovol…
Fysetc Portable Input Shaper has specific locations for mounting holes, this mod allows you to attach it to your Voron V0.2. It needs 2 M3x6 screws so it can be secured to your carriage.
my door in the fysetc kit have to holes and i want to use them … and i think screws are better than tape :-D unfortunately i saw the fysetc door handle model to late, but i like nut traps even more than heatsinks ;-)
A part to hold the M5 nut for the gantry bolt so it can clamp to the metal gantry extrusion. Assemble steps: 1. Add 3 M5 nuts to 3 holes in the model 2. Slide the cube inside the hollow extrusion 3. Slide the bolt in (You will need to use…
I was having clogging problems when finishing the assembly of the Prusa Mini from Fysetc and I found that there are similar devices in some creality that prevent the ptfe tube from separating from the heatbreak or nozzle and thus the…
Uses M3 screws, that will screw in plastic to secure the ADXL to the mount Side with the rectangular dip is where the ADXL will mount. This was a request by one of my patrons, haven't tested it myself. edit: needed a little wider recessed…
This is is a remix of LumberjackEngineering's PanelDue case for the original Duet display. I modified the case for the clone version (from fysetc 5 inch V3). What I changed: Cutout for flash cable and SD card Cutouts for reset and erase…
More buttons for Fysetc Hotkey
I couldn't find a back cover for the FYSETC 3.2" screen so I remixed this one to make it fit. Edited in Fusion 360. Print instructions Print face down with no supports.
For use on Fysetc Clone nuts mini-z-bottom_M3_R8_Fysetc V1.1 add "stop" for the T-Nuts Print instructions Rotate to 58° for printing 0.20mm 20% inFill (Grid)
Credit to WhatAMess13 for the original design. I found that the screw locations for the bed mount model in their design did not line up with mine. In the course of playing around with this, I also realized that I didn't like messing…
Introducing a better way to mount your “Super Ultra Mega Light X Beam for V2.4 and Trident” X beam. Print using PIF standards Layer height: 0.2mm Extrusion width: 0.4mm, forced Infill percentage: 40% Infill type: grid, gyroid, honeycomb,…
Cooling duct for the stepper drivers for my custom Voron build. It suites 6 or 7 steppers drivers. Pick the file you need. Note: didn't test the 7-stepper driver version, since my printer has only 6 (extruder is on the toolhead board).
Some buttoncaps for Fysetc Skirt kit…
smaller mount for galileo 2 umbilical.
Purchased the Fysetc DSI display as it was much cheaper than the BTT one but found that it's a much slimmer display with the ribbon cable in the middle instead. Remixed to make it work for the Fysetc 5" DSI display. Update : Added a…
Remeixed the Fysetc Portable Input Shaper Mount from https://www.printables.com/de/@WhatAMess13_573337 so that they fit on a Neptune 4. The data should now be oriented correctly. I printed them with 0.2 mm layer height and support.…
A simple holder for LED stips supplied in ERCF v2 kits by Fysetc. Works with any vanilla (non-Fysetc) ERCT couplers – both 90° from RC1 and 180° from RC2. If you don't like the couplers provided by Fysetc, or if you already printed all…
add cutouts as you need them (like on, off switch, bridge out reset button, indicator leds etc…) Required hardware is: 4x M3x6 screw (for pcb) 4x M3x10 screw for mounting clamp to bottom of case 4x M3x6 (or up to 20mm) sink head screws 8x…
Mod of the Armchair Engineering ADXL mounts to fit the fatter PCB of the Fysetc Input Shaper.
Thanks to @neutrOn for the remix with display adjustment. Since I don't need the USB port up front I removed it.
This isn't a direct remix of Frank's model but I was inspired by it and basically copied the design to work with the larger FYSETC 3.2" LCD. Giving credit to Frank S. for the idea. Thanks!! Created in Fusion 360. Here is the USB cable I…
This is a small slightly oversized case that mounts on the bottom of the 2020 profile of the Sturdybunny / ERCF v2 below the filament blocks at the back. Features Accurate USB-C & Power Pass through holes. Left and Right passthroughs at…
-UPDATED - Wanting the Sweet CNC bed from Fysetc but also wanting that Sweet Stealth Look on the front with the Voron Logo from Maple Leaf Makers? Then you have come to the right place! after originally adapting the stealth front to cover…
The original cover that is provided by Fysetc hits the bolts on the A/B motor mounts. I recreated the cover from scratch in Fusion360 and added clearance for the hardware. No more issues.
I replaced the Easy-Brd in by ERCF with a Fysetc and wanted a similar mount. Oddly, the mount I had held the board in specific orientation which I could not find in other mounts online (and I couldn't even find the original mount of this…
Available in 2 or 3 Fan variants, simply prints upside down and screws in using the original fixing points and longer (40mm) screws. I designed this to be printed at .2 layer height, it requires 4x Heatset inserts per fan. It was designed…
A mount for the Fysetc H36 (Note: V1.3 with the molded cable only! V1.2 coming soon) toolhead board to attach it to the back of a Sherpa Mini extruder and provide strain relief and retention for the connectors. The strain relief is not on…
Backpack for the Fysetc Hexa Distro Fusion board. Interfaces with N3mi Umbilical Exhaust plates v2 ( https://github.com/DraftShift/CableManagement/tree/main/UserMods/N3MI-DG/Umbilical_plates_V2 ) Uses a PUG for cable strain relief…
Modified back cover part to fit fysetc 2.8 lcd display board (speaker and connector have a different position). Other parts see original model “Prusa Mini - Back cover with USB”
bed spacer holder for the 12mm round bed spacers that fysetc sells that come with the peek screws. Use hammer T-nuts and m3x8 socket head please leave ⭐ review and rate. Check out my other designs.…
This is a conversion of Orion Atlas to Onstep. It should also fit EQ6 class mounts. It is using FYSETC E4 running OnStepX
Simple mod to test your Y axis acceleration in the middle of the bed. After print, keep your bed heating on, add 2x M3 short heat inserts and 2x M3 4/6mm cap head bolts for mounting. This should make more precise acceleration test.
The adapter was originally designed for the Voron V0.2 Mini Stealthburner toolhead, but the added kidney slots should allow you to mount it on other toolheads as well. There are two versions of the adapter: one utilizes 2x M3x5x4heatset…
Switch filament on layer 11. From the back side place the spacer if you want to have the buttons flat.
Version with better hide lcd socket
Just follow the creators instructions.
Mount height is 15mm from plate. V0 Plate - Catalyst is… 15+6+1.6mm…use shim please!! V0 Plate - Catalyst mount is 12mm screw Catalyst Mount - Catalyst is 6mm-8mm FYSETC Catalyst (Affiliate link) https://s.click.aliexpress.com/e/_DkpFNfJ
This is a mount for the FYSETC USB ADXL345. Print settings: Layer Height: 0.2mm Infill: 10% Supports: Recommended but not required --------------------------------------------- Changelog: 25.01.2023 - Initial Release
Clean Geometry: Legacy artifacts and unnecessary design elements from the original Fanny Pack model had been stripped away Board Mounting Bracket: The mounting bracket has been re-designed to use M3 heat-set inserts for all four board…
Mount for a FYSETC Portable Input Shaper on a Prusa MK3s Bear extruder ( BearExxa ) and bed. It should fit an MK2 or MK3 just fine, the extruder mount is very simple. You will need to pause the print a dozen or so layers in to add the…
…Please be sure to hit like & post a make, I'd love to see your prints! Mount Fysetc Portable Input Shaper USB C Accelerometer on Biqu H2V2 & H2V2S extruders. We have two mountings solutions for the X axis here. An end motor mount that…
I decided to design my own holder and fan shroud for the Fysetc Spider motherboard For the holder i used m3x5.7 od4.6 heat set inserts For the fan shroud i used 4xm3 35mm screws and another 4 m3 20mm screws for the fans (in my case…
English description below Für das phantastische OnStep-Projekt von Howard Dutton ( https://onstep.groups.io/g/main ) hier ein Gehäuse für eine Steuerung auf Basis des 3D-Drucker-Mainboards Fysetc E4. Vorab: Das ist kein Projekt für…
I modified "Sherpa mini filament sensor - PC4-01 connector" to fit my setup better, so though I would share. I added 8 mm shaft to replace the Metal ECAS in the Fysetc Sherpa mini CNC version Extruder. I used a 13 mm reverse bowen tube in…
This is designed for the almost-full suite of accessories that you can get with OnStep. I don't need a focus motor/ derotator, etc, but there is space for it. I also include mounting brackets. These are pretty sturdy, but need support.…
I bought a FYSETC PanelDue clone ( https://www.aliexpress.com/item/4000152814384.html ), and I quickly found out when I received this that "clone" is probably not a great description as it is more like "inspired from". I guess I should…
