370 modeli
Author: CreativeTools 3DBenchy is a 3D model specifically designed for testing and benchmarking 3D printers. It is a small recognizable object that you can download for free, make and share. http://www.3dbenchy.com/
One of the sample models for the Prusa CORE One+ INDX 4T/8T. This is the popular print-in-place herringbone gear mechanism in a 4/8-color version. It can be easily printed with the default settings at a layer height of 0.15 or 0.2mm.…
About I'd been rolling around ideas on how to design a SideKick for the 4 nozzles on each side of the Core One INDX design. I started working before release by using various photos and video stills to guesstimate certain measurements. As…
A painted Torture Toaster in 8 colours, ready to test your INDX Core ONE! 1383 changes at 0.2 layer height.
Read the instructions of the original model: For PrusaSlicer 2.9.6, the offset can be changed in the printer settings, inside each extruder (option name "Extruder offset"):
Da es noch keinen Automatismus gibt, der anzeigt welches Filament in welcher Düse geladen ist, hier meine analoge Version. Angepasst auf diese Filament-Samples mit 35mm x 2mm x 70mm…
⇨ Click here for the big version for the Core One L Small bin for trash like purge lines - with positioning aid to prevent bed crashes. I used 4x1.2mm magnets, but you can use the STL with a flat bottom and add your own recesses for…
The width is 110mm, although the printed version in the photo has been scaled in the slicer to 120mm. Thanks to the gentle slope, all remaining water flows easily into the sink. Any material, but the smaller the layer height, the better…
Parts neccesssary for INDX CORE One/+. Please note: Models designed only for the Founders Edition are marked with " FE " in the title. Download the latest PrusaSlicer and use the following settings**: Print settings: 0.20mm STRUCTUAL…
Sample models for the Prusa CORE One+ INDX 4T/8T. Both models can be printed at 0.2mm layer height without supports. Poison Dart Frog (4 colors) Our model was printed with the following Prusament PLA filament colors (the order of…
This Prusament Goldfish remix was hand-painted and prepared for both the 4T and 8T versions of the Prusa CORE One+ INDX. Its patterns ressemble a goldfish you can find in an aquarium. Filament used for printing the presented models: The…
The original Buddy3D camera for the 🥰 Prusa CORE One comes with the Wi-Fi antenna freely hanging outside the housing 🫣. This not only makes it look unfinished but also leaves the antenna vulnerable to damage. The flexible part of the…
Want to look at the INDX with your hands, as well as your eyes? Does the infinite void beckon you to thrust your hands into the machine while it's working? Do you want to see your first layer? Do you just not like the front plate? Then I…
Replace the original nozzle seal holders and mount the chamber light bar where it used to be for better lighting on the first layers. The metal bar with the chamber light snaps into place and no additional hardware is needed. Confirmed to…
OneTop – Modular Top Enclosure for Prusa Core One / Core One + (MMU / INDX) OneTop is a modular, magnetically mounted top enclosure for the Prusa Core One. It installs without screws and is held purely by its geometry and integrated…
I wasn't able to use the highly regarded screw organizers for the core one when I built mine, and looked for something similar for the INDX upgrade. I noticed there are two separate models (one for INDX kit hardware @wubbr , and one for…
Wanted to make an adapter to work with the included parts, this can be installed on your already assembled INDX. This thing attaches to your filament sensor assembly and allows you to connect PC4-M10 passthrough fittings, or another model…
OFFICIAL INDX SV08 OG & SV08 MAX INTEGRATION By appointment from Bondtech! Bondtech supplied an INDX unit for testing & systems implementation. Welcome! Im glad you found us here! So you want to add INDX to your Sovol printer. This is…
Description This is a remix of ritchiedc's CORE One INDX Filament Sensor Top with PTFE Couplers , which itself is based on GavinOracle's original filament sensor top for feeding filament from a dry box. I added number markings on the 3D…
I was able to remix this version for compatibility with the INDX 8 tool variant and it is already painted! For those that are curious, this was PLA. These are the colors that I used (links are not affiliates in any way): Polymaker Pro…
*Work in progress. Still need to add pictures and documentation. Files used to add the Bondtech INDX system to a Voron Trident R2. Additional Hardware Required Front Idlers 1515 Extrusion (Horizontal frame extrusion width minus 35mm, ex.…
Since i love the CORE One modular side storage and i needed it for the CORE one L i made my own. The holes for INDX nozzles are currently untested but made from the original bondtech CAD drawings. For the left tools tray the box with the…
The Demon INDX Belt Helper Tool allows you to keep both hands on the job without loosing track of your belts. It lets you lock the belts in the correct position relative to each other - so they'll always be the same length next to each…
Fill the gap between the top cover and tubes, don't have to unload
Bondtech INDX system, files origin from https://github.com/BondtechAB/INDX I have painted this toolhead step file and separated each component to STL, so you don't have to I also share you a Blender file for rendering
Bring iconic sci-fi history to your workbench with this massive 20.5" x 10.5" (52 cm x 27 cm) replica of the Battlestar Galactica Viper Mark II! Truly an impressive showcase piece, this model captures the aggressive lines, triple-engine…
Magnetic Light Bar – Prusa Core ONE Added LEDs Simple, modular LED strip mounts designed specifically for the Prusa Core ONE chassis. These holders are sized and shaped to nest cleanly into the bent sheet metal geometry of the Core ONE,…
Original external prime bucket is made to be held in place by spoolholders. These prints ads magnets to snap to the right side panel. This version is NOT Prusa original extended bucket but with magnet. It have different dimensions, as I…
Most of the users have already noticed... Since the PTFE Tubes move through the holes in the top cover and the top-cover is harder and thin, they are being grinded. These grommits are designed to keep the PTFE tubes movable, but will stop…
When managing multiple toolheads, it’s easy to lose track of which spool feeds into which extruder. These caps solve that problem by clearly marking each spool holder with its corresponding toolhead number. Features Perfect Fit: Designed…
Summary After all the updates I should summarise what's now in this model: A minor remix of Prusa's original Tool Dock model to include magnet poke holes. As well as this simple remix, all the other STLs in this model include these holes.…
A painted 3DBenchy in 8 colours, ready to test your INDX Core ONE! 1017 changes at 0.15 layer height. As the Core ONE INDX profiles yet to be released, this is currently configured as an 8 tool Core ONE.
4-Color INDX Benchy - Optimized for Snapmaker U1 This is my Snapmaker U1 optimized remix of the 4-color INDX Benchy. I originally wanted to print this Benchy on the U1, but after slicing the original 3MF I noticed several areas where the…
Hello all, This 3D Benchy model has been custom-colored using a 7-color scheme as a comprehensive test for the H2C or Prusa Core with Indx 3D printer. Each section of the iconic Benchy boat highlights a different color, allowing for clear…
MMU (INDX, XL, AMS, etc.) 5 COLOR TEST | with tray (note: There are 2 versions available. 1 in stencil-style & 1 in plate-style . Also there are 2 versions of the tray ! For a quicker testprint, there is a thinner version available! But…
Work in progress of the Reverse mounted gantry for Bondtech Indx and Voron V2/Micron2020 recommended to use BFI front idlers if you use this setup you need to replace the rear extrusion with a piece of 1515 BOM In addition to stock v2…
Note: This is not the final version, as I don't have an INDX yet. As soon as I get my Founders Edition, I plan to add mounts for PTFE tubes or INDX filament sensors. My goal is to do this with little to no modification to the existing…
A little accessory for your Prusa Core One+ INDX to help you with tool and filament management. Simply print the numbered flags and press them onto the PTFE tubes. and slide into the preferred position. It works for the Prusa XL and for…
V2 of my rear filament sensor holder for the SpacePi rack . I was not happy with the first design, as it was sticking out too much at the back of the printer. This design is much slimmer and does not stick out more than the filtration…
A quick test print for the Prusa CORE One+ INDX. Author: Prusa Research (Vlado Turek)
I created this simple test model to put the Bondtech INDX system through its paces. Two variants are available: a 4-color and an 8-color calibration version. The circular, pie-sliced geometry is specifically designed to evaluate the…
Update 4th Sept 2026: Added a bung for the holes left by removing the twist locks in the turret. It's a friction fit, but with a taper to keep it in place. Update 2nd Sept 2026: I've now added a remix of the door magnet holder that brings…
INDX founders plaque magnet holder - use two Ø10x2 magnets. Enable supports under the magnet slots to test PETG on PLA supports or choose no support version
I created extremely simple spool holder for all those without side spool holders or those with 4T INDX with spool holders on the other side and who already printed their extended bin (Revision 3). With this holder you can use this bin…
Compatibility: V Core 3 and 3.1 (MFBS hybrid upgrade) V-Core 3.2h (Rat Rig's hybrid upgrade) V-Core 4 V-Core 4 hybrid OneBox and Enclosure 2 All Ultralight print heads. Current Ultralight print heads released: Bare template, for tool…
Rugged storage and transport case with custom insert for four INDX passive tools. Requires 6x Screws (25mm, or resized in Fusion360) Fusion360 File Attached
This is a part-remix of the Prusa CORE One INDX extended bin waste-management system, combining a Handle-Hatch with a Hybrid Filament Bucket . UPDATE 1 - The Handle-Hatch models now have optional M10x3 magnet mounts to secure to the side…
Updated for new 6.9.0 FW and configuration files (22-Aug-26) I took fuchsr's famous and excellent remix of Tronnic's Temp Tower. I sliced it and created G-Codes for each tool for simple and rapid use as some people may be running a mix of…
While waiting for my Core One INDX conversion kit (non-FE) to arrive, I've been reading the forum and noticed that quite a few people have broken the tool holder whilst tapping the two holes. One possible reason for this is not making…
This plug fills the gap around the tube inlet holes in the INDX top cover. This will help stabilize the chamber temperature and prevent hot air from escaping through these open holes. If the 4 tool system has 8 holes, there is a solid…
I am going to be running the filament from dryers above the printer. I like GavinOracle's remix of the INDX filament sensor top to add PTFE couplers but my PC4-M10 PTFE couplers use a 0.9mm thread pitch. I remixed it to update the thread…
I created this model because I have CNC gantry parts and don't want to lose them. Additionally, this adapter doesn't require the removal of any parts; just unscrew the Z-belts, feed them through the adapter, and re-tighten them. What you…
Simple tool to assist with consistently installing the 3x8mm magnets into the INDX toolholders. Requires: M3x8 SHCS x2 Thread the M3x8 SHCS into the top half of the tool. Make sure the 3x8mm magnets are oriented correctly (use an INDX…
V2 update - Fixed a few minor artifacts and added a chamfer to the drop hole. If you have the original, probably not enough to warrant reprinting. Redesigned the inside of the bin to aid the smooth flow of the purge pellets into the…
If your hands are shaky and you don't want to mess up your INDX sticker, just print this jig. Lock it onto the door hinge as shown in the picture, and it will guide your sticker perfectly into place. UPDATE: added only x version
If you not use the Original PTFE Holder for the Filament Sensor, here are some Covers. Because you need this covers, maybe you will use this filament sensor holder: If you need some Filament Sensors with numbering:
Hey Folks, If you search for an Organizer for the Gen2 Upgrade you can find the model here: As you have to remove some screws from your CoreOne during the assembly of INDX using the INDX Conversion Kit, I have made this organizer in which…
This remixed xLCD cover is best printed with 5 x 0.25 tools to ensure the logos are as sharp as possible, I have also enabled PETG supports on tool 6 with a 0.4 CHT tool. This has been tested on the R3 xLCD.
INDX Code One - Holder for 2 Filament Sensor Tops for the Installation on one side of the Printer. The Back-Version uses the two holes from the Frame, you need two M3x5mm inserts, the Side-Version uses the designated hole/screw. For the…
Hi I built my Core One before @ooishoo published their screw organiser but it would have saved a lot of effort. So for the INDX FE build I was looking for an equivelent model, I made Core One INDX Conversion Kit Screw Organizer (for…
I created extremely simple draught shield for all those who already printed their extended bin (Revision 3). You can use this shield with stock extended bin without any modifications, but it has to be in specific position to do its job.…
Print the bracket PETG or stronger, PLA might be too brittle and will be exposed to the heat from the printer case. I recommend at least 4 walls, 4 top and 4 bottom, 20% Gyroid infill to endure strength around the screw holes. STEP 1:…
This bead slides on PTFE tubes and stays in place by its own. Can always be moved if needed. You are going to find .step for download too , if you want to modify it for other sizes. Printing: Print in the given orientation. Use different…
Model includes test fit piece for M3 nut and 3x8 magnet, you don't have to print it . Print setting: 3 perimeters at least 15% infill I'd recommend "pull from behind" method for installing Nyloc Nuts. Magnet extraction hole is made for…
The default solution works pretty well, but occasionally I had prime pellets bounce out of the bin due to the distance of the fall. As someone who is an obsessive neat freak this was not acceptable. I then proceeded to modify the original…
Nut aligment tool in package for INDX Founders edition isn't too handy for me. I made my own tool for easy find the position of screw in behind during assembly/disassembly of side panels. Note: to ensure that nut not fall down you must to…
20mm Calibration Cube(s) w/ 8 Colors for INDX
Print it using any matching or even not-so-matching set of colors! Author: Prusa Research (Vlado Turek)
While being unable to wait for my Founders Edition Core ONE upgrade to arrive, I whipped up this new xLCD cover. The print requires 6 colors. I recommend single perimeter on the first layer, and on the modifiers, monotonic lines for…
Numbered caps for the new hollow spool holders of the Prusa CORE One INDX . The set includes caps numbered 1–8 , making it easy to identify the eight INDX filament/tool positions at a glance. Designed specifically for the new hollow INDX…
A twisting 8 sided tube for testing out INDX tool changing. 3500 changes at 0.2 layer height. As the Core ONE INDX profiles yet to be released, this is currently configured as an 8 tool Core ONE.
Print in as imported orientation. Organic supports from build plate only. Block supports from inside of tube. .2 Layer Height. 2 Walls is plenty. The ink cartridge is a snug but reversible friction fit, glue it in if it backs out while…
See all settings and printing methods in the original model description. I couldn't describe it in more detail and accuracy. I added a new model with Heat Set Insert, M3X5mm
A solution to close up the holes in the stock top hat for the C1 INDX. You will need to drill out the existing PTFE holes to 14mm . Most Step drills will have a step at 14mm. Be warned, the tolerances on this are very tight. there is…
Printable TPU Sealing grommets for the Core ONE top hat. The goal being less heat escaping when printing filaments requiring a hot chamber. These will prevent most movement of the PTFE tubes through the top hat, so check your lengths. The…
Modified with a campfer to clear for the Core One INDX Toolholder plate.
The classic 3DBenchy, split into two bodies so your toolchanger can print it in two colors with almost no purge waste. Print with glow in the dark filament for the perfect look in the dark. Made for machines with a dedicated nozzle per…
A few color adjustments, printed and tested on the Prusa CORE One+ INDX.
You'll find models for the cap, for the numbers and the decorative ring. I provide the plain base model which doesn't contain any numbers so you're free to add whatever you want on your endcaps. The numbers are in bold Helvetica font to…
Old PTFE removers assume that the tool where the tube rested was fixed. This is no longer the case with INDX. Now you can hold the INDX tool in your hand, the PTFE tube between two fingers pressing this remover on connector to clear the…
Core One + Gen2 INDX rear mount for the filament sensor with integrated cable management – no loose cables outside the printer. This rear-mounted bracket is designed to provide the shortest possible filament path from the sensor to the…
Update 02SEP26: I've added a version with provision for ECAS fittings in the filament output holes, to replace the supplied collets. Update 07JUL26: I've added a version with provision for ECAS fittings in the filament input holes, so…
Core One + INDX spool mounting plates with integrated puck and number of the corresponding tool head, optimized for use of the USS Drybox. Update 14. August 2026: A version is in the works with 6 spools on the right and 2 spools at the…
I had an alternative idea for mounting the CoreOne chamber light in the original position with INDX Founders Edition. The only thing stopping us from mounting the light bar in the original position is the lack of threads. The light bar…
A 3D model for the injection moulded part “Puck-holder-top” & “Puck-holder-bottom” from the INDX upgrade kit. The original IM part is superior in regards to strength and this should ideally be used incase one breaks or is missing. Best…
Hole cover for INDX right panel after removing the central spoolholder. Print with PETG filament (on picture: Prusament PETG Jet Black). 0.15 mm Detail. No support. Place the locking tab on the central hole on the right panel. Press until…
I wanted to have the threads on the tool dock to be reusable and had seen that someone used a threaded insert. I only have heat-set inserts, so I thought I would modify the dock to use a M3x5x4 heat-set insert instead, and I decided to…
Remix of the CORE One INDX Filament Sensor Top Model from "ritchiedc", I added only the Numbering. Import the Model into the Slicer and split the Model into objects. If you need an holder for two filament sensors: And Covers for the edges:
Test model - designed to be my first test print on my C1 INDX Founders edition. Its 11 colours - but the plates should be able to be arranged into sets of 8 colours. The profile has been definite based on the C1 MMU3 - with 11 extruders.…
Magnetic LED Strip Holder for Core ONE Enclosure (INDX Conversion) After converting my Core ONE to INDX, the enclosure became very dark, since the front LED strip is now covered/blocked rather than removed. To fix this, I designed a…
Introduction First: This has not been tested at large scale yet. I would be curious to hear from anyone who tries it for a print with a large (1000+) number of toolhead changes. In my in-machine testing, it takes about 300 tool changes…
Updated to use the Vorn spec 3/5/4 heatserts. 2.9mm plastic below to allow nyloc like anti vibration movement. Does have the 3d printed stepping for screw overhang as well. Added second model with holes to push the magnets, should you…
When printing in a relatively humid location, it is preferable to print directly from filament dryers or dry boxes, keeping the filament enclosed in PTFE tubing all the way to the printer. This filament sensor top for the CoreOne INDX was…
This is a replacement of the PTFE-holder-right and INDX-C1-FS-holder to mount the filament sensor on the upper right side where it is more convenient for certain dry box setups. It mounts with the existing screws used for the holder right…
This is a PTFE passthru for the 8T INDX and the onetop combo. the origional design had all 8 tubes going thru the middle and that made it very hard to get them the right length and limited the options for mounting the filament sensors. I…
MMU/AMS/INDX Multicolor test
Precision Gantry for the Prusa INDX Tool pickup and storage on the INDX is delicate, and interference or torque on the extruders can result in failed pickup or storage. This modification applies a simple geometric principle: by making the…
I made this ring to fine tune wiper on printer with INDX. It combines 4 color / 8 color print to quickly change all tools in short of time. It contains around 300 toolchanges. Tested only with PLA and PETG materials. Handy for visualise…
A simple remix of the original for up to 10mm belts. Uses 8mm panheads instead of taper screws - ignore the caps in the picture, I was lazy and they were closer. Does print useably without the supports but very clean print with them in…
