Wyniki wyszukiwania: matx

Sortowanie

105 modeli

P
PrintablesHooba

mATX/ATX IO Mesh Shield Blank

IO Shield blank for mATX/ATX. Printed in Jessie Black PLA on Prusa Mini+ Added modifier box to interior for grid infill 25% and zero top and bottom solid layers. After aligning the motherboard ports with the shield cut out corresponding…

Pobrania
1026
Polubienia
41
Ocena
4,67
P
Printablesmakerunit

mATX / ITX PC case

IMPORTANT: Keep in mind that this project is now several years old, and will have more inaccuracies than my more recent designs. No more updates will be done to this design. Watch the full build video here: https://youtu.be/yp67qvfYZVM…

Pobrania
3910
Polubienia
703
Ocena
5
P
PrintablesDockGuy

Modular ITX/DTX/mATX/ATX/SSI-EEB/SSI-CEB/EATX/XL-ATX mainboard frame/tray [Updated 2026-07-19]

Introduction This is a simple PC mainboard frame/tray system intended for open-air or custom enclosure PC builds. The intent is to support a broad variety of mainboards from iTX to so-called EATX with modules that fasten together with M4…

Pobrania
3751
Polubienia
428
Ocena
4,56
P
Printablesneon.blue

Open Frame mATX PC Case

This is my take on an open frame micro ATX PC case. Inspired by “ATX Open PC Frame” by Heblyz, I created this model from scratch specifically with the following features in mind: Fits mATX motherboards Fits larger ThermalTake 800W+ power…

Pobrania
3023
Polubienia
413
Ocena
4,91
P
Printablesftobler

mATX PC Case

A case I designed to be fully 3d printable. Fitting a RTX4060 ti super from Asus. Print at your own risk, there is not much space for a CPU cooler. I recommend to not print it from PLA as it can warp especially with heat from high powered…

Pobrania
1569
Polubienia
588
Ocena
4
P
PrintablesLinus3d

Lian Li A3-mATX Front Panel

Introduction I recently picked up the Lian Li A3 case for a Computer I was building. Unfortunately, the wooden front panel offered by Lian Li wasn’t available here in Germany. As a maker, I couldn’t just leave it at that. So, I designed…

Pobrania
1233
Polubienia
104
Ocena
5
P
Printablesw3rN42

mATX benchtable - open PC case

PC benchtables, also known as PC test benches, provide a convenient and efficient workspace for building, testing and troubleshooting computer systems, making it easier for users to build and test their systems, and to diagnose and…

Pobrania
1011
Polubienia
136
Ocena
4,67
P
Printablesadnanklink

OpenBench Desktop Case / Test Bench ATX/mATX/ITX

There are almost no atx bench top designs currently on thingiverse since most 3D printers are dimensionally too small to print parts for the ATX standard. This bench top design is capable of being printed on most smaller printers like the…

Pobrania
1001
Polubienia
154
Ocena
4
P
PrintablesAyoub G

mATX Minimal NAS (9 HDD)

I wanted an affordable DIY NAS case that fits 8 HDDs, no external GPUs or huge power supplies.I built this to fit an mATX board , as they're cheaper than microATX and give more space. I managed to fit a SAS LSI card. A low profile CPU…

Pobrania
992
Polubienia
132
Ocena
5
P
PrintablesTim Z

mATX Motherboard Tray With Optional Card Support

This is a motherboard tray to fit a microATX motherboard. The optional card support bracket screws into the side with two to five M3x12 screws depending on how secure you want the bracket. The motherboard is mounted down with four M3x6 or…

Pobrania
893
Polubienia
73
Ocena
0
P
Printableslazyxworkshop

LxW Open Air - A 3DPrinted mATX Case for Minimalist, Affordable Builds

A Compact, 3D-Printed mATX Open Air case for Builders & Tinkerers This open-air test bench case is designed for builders who need easy access to their components while keeping a compact yet functional layout. Whether you're testing…

Pobrania
752
Polubienia
121
Ocena
5
P
PrintablesMike T.B

Micro ATX (mATX) Open Air Test Bench

I decided to repurpose an old Gen 3 i3 PC that I had gathering dust as some kind of home server, the old case was too big and bulky so I wanted to make my own compact option couldn't find one that I liked, so here we are. I have included…

Pobrania
631
Polubienia
43
Ocena
5
P
Printablesogre56

Voron cube mATX PC case with ATX power supply

I could not find a case to print that would allow me to use all my current PC hardware, so I made one…. This should work with any video card up to 280mm long. This is a 300mm cubed case that was printed on my Voron 350 running at about…

Pobrania
622
Polubienia
139
Ocena
0
P
PrintablesMilos V.

Simple mATX form PC chassis

Had some older unused mATX small size main boards, fully equipped. Before recycling, I saw a need of small linux based server. The original Midi Tower chassis with 400W power supply was quite some big piece of furniture for this…

Pobrania
589
Polubienia
57
Ocena
5
P
PrintablesYAN

Lian Li A3-MATX front panel

Lian Li A3-MATX front panel

Pobrania
494
Polubienia
37
Ocena
0
P
Printablesogre56

Cube mATX PC case with ATX power supply

I could not find a case to print that would allow me to use all my current PC hardware, so I made one…. This should work with any video card up to 280mm long. This is a 300mm cubed case that was printed on my Voron 350 running at about…

Pobrania
490
Polubienia
91
Ocena
4
P
PrintablesMihnea

mATX PC CASE with ATX PSU, 260mm GPU and NO heat inserts

This is a very small mATX pc case that requires only wood screws and NO heat inserts. I wanted a small case for my old pc, without changing any pc parts. It has mATX motherboard, an ATX psu, a 260mm RX 580 videocard and two 2.5mm SSDs. It…

Pobrania
440
Polubienia
89
Ocena
5
P
PrintablesSUG

SUG-FreeBeam-mATX-Girthy PC Case

For detailed build, background, and item details: https://www.printables.com/model/1152896-sug-freebeam-matx High Level: 18.2L ( 346mm length x 276mm height 190mm width) mATX (ITX obviously too) ATX PSU (160mm max length) Full Size GPU…

Pobrania
360
Polubienia
110
Ocena
0
P
Printablesvadikgo

Lian Li A3-MATX front panel

Front panel for the LianLi Dan A3 mATX Case

Pobrania
359
Polubienia
29
Ocena
5

ATX/mATX/ITX PC Case | Open Motherboard

on photo mATX (ASRock B650M Pro RS WiFi) and ATX (ASUS Maximus V Formula) variants

Pobrania
348
Polubienia
35
Ocena
0
P
Printableslazyxworkshop

LxW Basic Plus - A Free Feature-Packed mATX Case !

LxW Basic Plus – A Feature-Packed mATX Case This project was designed to bring powerful mATX builds into a compact, well-optimized case—without sacrificing compatibility. It supports mid-range to high-end components, including full-size…

Pobrania
332
Polubienia
130
Ocena
0
P
PrintablesMalcom Edward

mATX Minimal Case sutible for smaller printers

This case was designed to lock together well while requiring minimal filament and able to be printed on most printers. I printed this on my ender 3 (Stretched to the limit in someplaces) and is setup to acomodate a Dual slot gpu, though…

Pobrania
324
Polubienia
81
Ocena
5
P
Printablesogre56

Dragon cube mATX PC case with ATX power supply

I could not find a case to print that would allow me to use all my current PC hardware, so I made one…. This should work with any video card up to 280mm long. This is a 300mm cubed case that was printed on my Voron 350 running at about…

Pobrania
301
Polubienia
40
Ocena
0
P
PrintablesEliasH44

The Herringbone - MATX PC Case

Dimensions: 248x332x278mm (22.9 L) Features: - Supports 2.5" and 3.5" drives - Allows for GPUs of up to 280 mm in length - Fits 2 92mm intake fans Print with PETG (I used SUNLU) and combine the segments with super glue. For assembly, you…

Pobrania
292
Polubienia
79
Ocena
1
P
PrintablesBassettDesigns

Corvus mATX (Micro-ATX) - 3D Printed PC Case - Voron Inspired

What's better than a big Voron? A small one! Remixed from the original Voron V.PC - 3D Printed Case to fit the mATX form factor. This build should fit the following: mATX & ITX Motherboard 199mm tall Air Cooler Tower 345mm long GPU…

Pobrania
289
Polubienia
103
Ocena
4

mATX Aperture Science PC Case Mod from Portal.

These files bring the Portal PC case to reality! It merges the designs seen in Portal and Portal with RTX. See the latest updates on this project here: https://www.cemetech.net/forum/viewtopic.php?p=315622 Prerequisites: These parts are…

Pobrania
282
Polubienia
158
Ocena
0
P
Printablessswilson

Open Air Case for mATX

Remix of my Veriton case that allows for a Standard ATX PSU to be used. Makes use of the same cut down motherboard tray, but the base has been redesigned in separate parts (mainly for strength). Uses this remixed motherboard tray:…

Pobrania
274
Polubienia
32
Ocena
5
P
Printableskeerekeerweere

Simple mATX form PC chassis M

little remix that extends the original somewhat. (M : Medium) made it 2.35cm deeper to fit matx asrock motherboard

Pobrania
260
Polubienia
26
Ocena
0
P
Printableslandlord

10 inch matx mount

This is mount for matx motherboard. [update] v1.1 update with precise hole spacing and cover in the front.

Pobrania
242
Polubienia
27
Ocena
0
P
PrintablesSUG

SUG-FreeBeam-mATX PC Case

https://youtube.com/live/ycVKY4jn1pk?feature=share - Live stream showing the processing and assembly of the case without the panels. https://youtube.com/live/vIafnoBmKZY?feature=share - Live stream showing some panel installation options.…

Pobrania
224
Polubienia
67
Ocena
0
P
Printablesjp1011

Compact mATX 5.3L PC Case with GPU

Hey everyone here's my design for an ultra compact mATX case with GPU support. Intro: The build was made almost entirely from spare parts hence the unusual combination of hardware. The unconventional orientation of the motherboard was in…

Pobrania
224
Polubienia
47
Ocena
0

Lian Li A3-mATX Vertical Stand

This model has been optimized for the BambuLab X1C using Bambu Studio. For the original print files, please check my MakerWorld post . Credit to PandaN on MakerWorld for the technique used to apply wood grain. Check out their process here…

Pobrania
216
Polubienia
41
Ocena
0
P
Printables3DMentes

Case for mATX MotherBoard

Optimised for 0.4mm nozzle. The internal structure must be in ABS with at least 20% infill and the outer part in PLA. You must need to split the outer part because of the height so theres is a ring to connect the parts. The io shield, in…

Pobrania
208
Polubienia
27
Ocena
0
P
PrintablesDik Harrison

Redesigned inserts for the Precision Screwdriver Case by TimATX.

The Precision Screwdriver Case by TimATX printed and fit together well, but my screwdrivers did not fit well. I printed it because my original case was cracked and would not stay closed. I redesigned the inserts, basing them on my set's…

Pobrania
208
Polubienia
23
Ocena
5
P
Printableskutch2001

Compact MATX Case

Expect to update with more pictures shortly. Originally wanted to fit this fully on a 256x256 print bed, all but one part fits, split one part that didn't in two for those that need it. Designed case as none was available for 4 PCI-E slot…

Pobrania
206
Polubienia
42
Ocena
0
P
PrintablesFaultier2917

mATX PC Case

Deutsch: Vorwort: Das Gehäuse wurde noch nicht gedruckt, es ist noch Work in Progress. Sobald das Gehäuse gedruckt wurde, werden die Files entweder geupdatet oder idealerweise so belassen. Das Gehäuse ist ein kompakter Midi-Tower mit…

Pobrania
205
Polubienia
38
Ocena
0
P
PrintablesJan

Open frame case MATX

Die ist ein PC case für Matx motherboard und maximal 2slot pcie grafikkarten Sehr minimalistisches aussehen. Benötigte Teile ⌀ 6 x 90mm Stange (material egal) → für befestigung von der Rückplatte Kunststoff Leim Nutzbares Material: PLA,…

Pobrania
168
Polubienia
36
Ocena
0
P
PrintablesJohn T

mATX Test Bench

Print both halves and four feet then screw in some motherboard standoffs and glue the pieces together. Fits a standard mATX motherboard or Mini-ITX motherboard. I printed with no top and bottom layers and a hexagonal infill, this make the…

Pobrania
145
Polubienia
14
Ocena
5
P
Printablesftobler

mATX case

I have designed this and ran it as a server for a year. Print at your own risk , there is not much flexible space for a variety of different GPU. It was printed in PLA but for high powered components i do not recommend it. I highly…

Pobrania
143
Polubienia
33
Ocena
5
P
PrintablesEliott JVN

Strong mATX 10" 2U-Rack Plate – Support-Free Design

It has been tested on a KWS 10" rack and fits perfectly. This point is important: to minimize bending and long-term creep, the plate is supported both on the front panel and against the inside of the back panel. I designed this because…

Pobrania
136
Polubienia
27
Ocena
0
P
PrintablesThinkArtWork

mATX PC Mount For IKEA Skadis

DIY mATX PC Mount with hook for Skadis. petg, 5walls, 50%infill. Motherboard pendant (mATX motherboard supported) Fan Bracket (360 Water Cooling Fan) Vertical mounting bracket for graphics card (need to equip your own graphics card…

Pobrania
128
Polubienia
37
Ocena
0
P
Printablessffmunkee

Super Simple mITX/mATX Testbench for SFX and ATX Power Supply

Trying to make a super simple test bench for SFX and ATX power supplies that can be printed on smallish printers. Motherboard holes are aimed for 3.05mm which should allow for #6-32 standoffs to self-tap, no heat-insert necessary. You can…

Pobrania
121
Polubienia
13
Ocena
0
P
PrintablesMilos V.

Simple mATX form PC chassis - bigger version

Remix of Simple mATX form PC chassis for the use with external AC/DC power adapter. This can accommodate bigger board.

Pobrania
119
Polubienia
15
Ocena
0
P
PrintablesPaolo Fenaroli

Lian Li A3-mATX — PSU Cable Cover (parametric, OpenSCAD)

A clean, parametric cable cover designed for the Lian Li x DAN A3-mATX case. It hides the PSU cable bundle visible through the tempered glass side panel, matching the white aesthetic of builds like the DeepCool PN850M. This cover is…

Pobrania
117
Polubienia
20
Ocena
0
P
PrintablesNobleSix-4

mATX Nas Case

sincerely, go buy a case it's more convenient and saves spaghetti requires: M3 5mm x 4mm insert M3 screws support an 80mm fan in the back up to 7 hdd "support" 2 120mm fan in the middle (hot-glued slim dissipator needed ATX PSU i don't…

Pobrania
114
Polubienia
17
Ocena
0
P
PrintablesGeCo GeaCreate

Open frame case PC Chassis - ATX mATX GenCase

GenCase - Modular Open Air PC Case Short Description GenCase is a fully modular open air PC case designed for maximum flexibility and clean cable management. Unique feature: convertible orientation to route all cables at the case base for…

Pobrania
104
Polubienia
29
Ocena
0
P
PrintablesLwzjn

mATX Open Case

Just an open case for a mATX mobo (244x205mm) that I did on a snowy day :p

Pobrania
94
Polubienia
12
Ocena
0
P
PrintablesiAmB

ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack

ASUS B85M-G R2.0 mATX 1U Rack Mount Tray — 10" Server Rack A custom open-frame 1U rack mount tray designed specifically for the ASUS B85M-G R2.0 micro-ATX motherboard, built to fit a 10" server rack (260×200mm interior). Prints as a…

Pobrania
86
Polubienia
8
Ocena
0
P
Printablesogre56

Skull cube mATX PC case with ATX power supply

This is just new inserts for my cube case. Please download the files and instructions from this model: https://www.printables.com/model/796807-dragon-cube-matx-pc-case-with-atx-power-supply Using a .2 layer height you will need to have…

Pobrania
85
Polubienia
18
Ocena
0
P
Printableszicherka

Open plate for ATX/mATX/ITX motherboards (20mm height).

Test base for ATX/mATX/ITX motherboards (20mm height). Test base for motherboards in the following formats: ATX, mATX, and ITX. The motherboard height above the table/worktop is 20mm. Designed to allow the motherboard to be…

Pobrania
78
Polubienia
7
Ocena
0
P
PrintablesLurdus203

Compact Open Frame PC Case / Test Bench (ATX / mATX)

About the Project Compact Open Frame PC Case is a minimalist and functional 3D printed test bench and daily case. It is designed to stack components vertically to save desk space, using an ATX power supply as the base and suspending the…

Pobrania
75
Polubienia
9
Ocena
5
P
PrintablesBassettDesigns

Voron V.PC - Universal Motherboard Mounting (ATX, mATX & mini-ITX)

Remixed to add the missing standoff holes for mATX and ITX form factor motherboards. The cable tray in the back has also been modified for extra clearance for the new standoff. Filling in this gap gives much better versatility to future…

Pobrania
72
Polubienia
28
Ocena
0
P
Printables3DFreeman

MATX Test Bed - Fits an ATX PSU

Update 24/07/25: Version 2 of the 120AIO for OneSlot & TwoSlot Beds, made stronger but with a more traditional fixing. Added a 240AIO version that could also hold a 360AIO and is as thick as a typical fan (25mm) for strength, so you will…

Pobrania
67
Polubienia
4
Ocena
0
P
Printablesthree88bu

LIAN LI A3-mATX front panel clip receiver

This is the top front panel clip receiver that mounts in the case and helps hold the front panel on. Im guessing its used in other cases, etc. I printed on a X1 Carbon with PLA using the .20 mm Standard profile and it seems to work pretty…

Pobrania
61
Polubienia
10
Ocena
5
P
Printablespiotrek mlot

matx case/holder

i have linux mint on this computer for seting up klipper to my 3d printer so it had to be compact. I didn't have rasppberry pi in my hands so i went with another alternative. to assemble this case you need to join two pieces. You can…

Pobrania
60
Polubienia
7
Ocena
0
P
Printablesidon

Thecus N8800 mATX Motherboard replacement

Theses models allows it to replace the original Thecus motherboard agains an standard mATX motherboard and a silent PSU.

Pobrania
54
Polubienia
3
Ocena
0
P
PrintablesZackary Young

Best Matx Testbench

This is a custom model i made for a lightweight compact mAtx testbench. This model came from a desire for an easy and cheap to print testbench. I printed at 0.2 mm layer heights with 20% infill. Supports only needed for the platform and…

Pobrania
53
Polubienia
9
Ocena
0
P
PrintablesHyperPcModz

LilFishyTanky - mATX FishTank Pc Case

This is a sleek, Fish Tank-style 3D printable PC case designed to show off your build like a display piece. The sharp edges and plexiglass side panels give it a clean, futuristic vibe while keeping all the hardware visible. Despite the…

Pobrania
53
Polubienia
18
Ocena
0
P
PrintablesRjun

Versatile mATX PC Rack

Purpose I designed this rack as a cheap solution to test my components but I have found it held up so well I am using it semi-permanently for one of my PCs! Print Settings I recommend printing in PETG or PETG ESD, standard settings are…

Pobrania
53
Polubienia
36
Ocena
0
P
PrintablesKurtis b

MATX 2U DeskPi Rackmate T2 Tray

WILL PROBABLY NOT WORK ON OTHER RACKS OTHER THAN THE RACKMATE T2 UNLESS YOUR SPACING BETWEEN BACK AND FRONT IS 10 1/4 INCHES OR 260.35MM PCIE CARDS WILL NOT FIT WITH BRACKET INSTALLED V1: Release V2: Changed back cutout to not block…

Pobrania
52
Polubienia
4
Ocena
0
P
PrintablesDiarx

mATX quick swap PC test bench frame

Designed this as I have a bunch of cheap old mATX boards/cpus with stock coolers that I need to test quickly without having to faff about screwing each one down, and this is what I came up with to hold them. Only tested on older budget…

Pobrania
51
Polubienia
9
Ocena
0
P
PrintablesMEL323

Magnetic MATX GPU graphics card support

Download on makerworld for bambu studio print profile Magnetic GPU support bracket for MATX cases Put a 8x2mm round magnet and the cover (rod) in the slot Reupload from makerworld (…

Pobrania
48
Polubienia
4
Ocena
0
P
PrintablesThinkArtWork

mATX Board Mount For IKEA Skadis

DIY PC Board Mount with hook for Skadis. petg, 5walls, 50%infill.

Pobrania
42
Polubienia
17
Ocena
0
P
Printablesbatteria_

Mini Pc - Compact PC Case for Asrock H610M-HVS (mATX)

Mini pc with modern CPU are still very expensive, and they also have the disadvantages of using soldered CPU or sodimm ram. I choose this board for the cheap price while still being compact, even if it's not an itx board…

Pobrania
37
Polubienia
7
Ocena
0
P
PrintablesMax_3D_Print

Forma I mATX PC case

Forma I Alternative link (Free): https://makerworld.com/en/models/3132314-forma-i-matx-pc-case Default Dimensions: Length 345.7mm, width 161mm, 278mm (w/ 15mm feet) Supports Mini-ITX and mATX motherboards, 325mm GPU, 135mm CPU cooler and…

Pobrania
31
Polubienia
31
Ocena
5
P
PrintablesHyperPcModz

LilCubey - mATX Acrylic Cube Pc Case

This is a cool-looking, 3d printable pc case designed to stand out. The sharp corners and plexiglass really give it a modern eye-catching appearance. One great about the design is it only needs a 180mm x 180mm bed to be printed. Pc case…

Pobrania
30
Polubienia
6
Ocena
0
P
Printablesred007master

GPU bracket (mATX) for "Modular .... mainboard frame/tray"

GPU bracket for https://www.printables.com/model/35720-modular-itxdtxmatxatxssi-eebssi-cebeatxxl-atx-main , for mATX, Asrock B550M Pro4 specifically, you WILL need to tweak to make it work with your MB and GPU. Source provided in form of:…

Pobrania
29
Polubienia
5
Ocena
5
P
PrintablesBrennus

Compact mATX Computer Case (20.6 Liter)

I created a computer case to fit into a desk I made, and it looked fairly nice, so I thought I would share it. The body is made of PLA, the diffuser from PETG, and the motherboard back plate is ABS. I personally don't trust PETG to be the…

Pobrania
27
Polubienia
8
Ocena
0
P
Printablesmista_niku

MacPro G5 Rear Fan Bracket modified to fit The Laser Hive mATX Original Kit (Case Conversion)

This is a version of the original MacPro G5 rear fan bracket modified to fit with The Laser Hive's “mATX Original" case conversion kit. Link to the G5 case conversion kit: https://thelaserhive.com/product/matx-original-kit/ Just in case…

Pobrania
27
Polubienia
4
Ocena
0
P
Printablest3chguy

LianLi a3-mATX vertical GPU XFX SPEEDSTER MERC 310 support

OnShape link https://cad.onshape.com/documents/fe777d1575cef891ca305e72/w/b5b392b5b9760dca0e4465e3/e/3b2138d3dad221bb9173e2bf?renderMode=0&uiState=67a10b58303468093a6ba79a Needs 1x M4 heatset insert, 1x M4 bolt, 3x M3 bolts to mount into…

Pobrania
22
Polubienia
5
Ocena
0
P
PrintablesIsleTech

Modcase Evolution mATX Multi-Material Side Panel

This is a remix of the side panels from the Modcase Evolution case. Very nice baseline design, I highly recommend it! I wanted my side panels to have a bit more flare to them, so I made them into multi part pieces! The mesh can be printed…

Pobrania
21
Polubienia
6
Ocena
0
P
PrintablesDouglas Hale

drill guide for adding standoffs for mATX to ATX PC case

bolts to existing ATX mounting points and indicates positions for the 2 extra mATX bolts

Pobrania
20
Polubienia
9
Ocena
0
P
Printables420coupe

Lian Li A3 mATX PSU Bracket Adapter for Alphacool Core 120mm Reservoir

Introduction / Description This adapter lets you mount the Alphacool Core 120mm reservoir/pump combo vertically on the PSU bracket of the Lian Li A3 case. It was born out of a personal modding challenge: I originally planned a custom AMD…

Pobrania
20
Polubienia
1
Ocena
0
P
Printablest3chguy

Lian Li A3-mATX Kingdom Come Deliverance front panel

Available on OnShape too https://cad.onshape.com/documents/fe777d1575cef891ca305e72/w/b5b392b5b9760dca0e4465e3/e/494da129e960faa7d66c887b?renderMode=0&uiState=67a107d3303468093a6b9919

Pobrania
19
Polubienia
6
Ocena
0
P
PrintablesShamus20

Slat Mount For Matx Motherboards

designed for slat-wall at work to allow for interchangeable cloning machines. should be compatible with most slat-wall designs. a few parts you will need to buy/have. -motherboard standoffs (i used m3) -screws -and heat inserts -drill…

Pobrania
19
Polubienia
5
Ocena
0
P

Matx Nas-9Bay-GPU

First time Uploader. Just Wanted to make a MATX NAS case, with more than 4 bays, full size gpu, taking up as small space as possible. Would be thrilled if somebody wants to modify/remix to make it better. Can share cad files, but can be…

Pobrania
18
Polubienia
4
Ocena
0
P
PrintablesNiklas Ahlfors
Pobrania
14
Polubienia
5
Ocena
0
P
PrintablesBefernafardofo

Smaller matx benchtable

micro ATX benchtable to test the components before building the PC.

Pobrania
14
Polubienia
1
Ocena
0
P
PrintablesMNZ4

mATX Bench Frame

Additional clearance with 2.5" HD bracket

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesDennis Olsson

mATX mount for openGrid Multiconnect

Quick CAD. Does the job good enough for me. Could probably be optimized but is hidden by the motherboard. Print 6 standoffs and 1 base. I printed it all in PETG for the heat resistance. Mount the motherboard using M3 screws from the back.…

Pobrania
13
Polubienia
5
Ocena
0
P
Printablesmista_niku

The LaserHive mATX Original Kit (MacPro G5 Conversion) IO Shield cover

In case you're modifying your MacPro G5 case with The Laser Hive's Original mATX Kit, there will be a small gap between the IO mount and the back panel. This model will help you cover the gap with a shroud to avoid too much dust ingress.…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesIsleTech

Modcase Evolution mATX Door Bottom w/ Cutout

This is a remix of the underside cover from the Modcase Evolution case. Very nice baseline design, I highly recommend it! Due to some size limitations, my PSU sticks out of the bottom of the case. Therefore, the power cable has to be run…

Pobrania
10
Polubienia
4
Ocena
0
P
Printablesone

mATX Motherboard 10in Rack Mount (244^2mm)

Uses M3 heatset inserts and standoffs to mount a standard-size mATX motherboard (244mm x 244mm) inside a 10in rack. Specifically designed to fit the KWS Rack v.2 Links (contains affiliate links; as an Amazon Associate I earn from…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesIsleTech

Modcase Evolution mATX Side Intake Fans

Power supply was choking a bit due to the orientation. In my configuration the PSU fan is pointed toward the inside of the case, which isnt optimal. To give it a bit more air I added two 60mm noctua fans. One of which has a baffle to…

Pobrania
9
Polubienia
3
Ocena
0
P
Printablesracerethan

MATX Open Bench Leg With Clearance For Top Fanned PSU.

A simple cut to a leg to fit a PSU that has one those fan shrouds on top.

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesJordão Barroso

Mini ITX to MATX adapter for Corsair 2000D airflow.

Mini ITX to MATX adapter for Corsair 2000D airflow.

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesMacifom

Tactile Power Button for LxW Open Air mATX Case

This bracket and button cover allow you to use a standard 12x12x7.3mm tactile switch (see photo) as a power button in LxW's Open Air mATX case . The bracket fits the original mounting holes in the case's Front IO plate and should be…

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesLiam

NR200 compact side SFX mount for mATX motherboards

The original mount holes for the PSU bracket are covered by the mATX motherboard. This bracket allows you to still install the PSU to the side of the case with a duct for getting cleaner airflow from the side vent (otherwise it tends to…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesTonoEek

Open Frame mATX Power Button Holder

Made a little stand for a keycap power button i got off amazon, just super simple little stand that i used a longer screw to keep on the side when building the case

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesThomasisnormal

Basic mATX holes

This just has the holes for mATX. I test it with the one I got. Ideally this would help someone make a pc case, but at least with me it a step in the direction I want to go. Here is where I got it from (page 12) :…

Pobrania
5
Polubienia
5
Ocena
0
P

Emachines foot for vintage mini tower mATX case for T2692 T3120 T3256 T2682 and more

These should work with most vintage Emachines towers of the DDR memory era. The ones with the black or grey case and rounded silver front. Honestly you could also use them with any other computer case as well though. You might want to…

Pobrania
4
Polubienia
3
Ocena
0
P
Printables0x2A

0x2a's Vesa200-mATX adapter

This adapter bracked allows an mATX motherboard to be mounted onto a 200mm by 200mm vesa mount. An example usecase could be a home theather setup where the PC is hitten behind the tv (check the pictures). Printed in PETG with 0.4mm…

Pobrania
3
Polubienia
2
Ocena
0
P
PrintablesGear Seekers

MATX to ATX Reverse Riser Cable Bracket for LSI 9220 8i HBA

This is a bit of a niche design for using a riser cable to move the LSI 9220 8i HBA to another location in the chassis. This requires your own riser cable (approx 30cm long) and some brass inserts. This is designed to work in the…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesRjun

HP EliteDesk 800 G2 Front USB, Speaker & Power Button Mount for mATX Rack

Purpose When converting my HP EliteDesk 800 G2 to ATX PSU and full power GPU installed on my mATX PC Rack I found that I must keep the Front USB/Audio Connected in order to avoid warnings during startup. These mounts allowed me to secure…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesPaYFrog_Customs

EuroCase - Eurobox compatible mATX PC Case

For this case u need to Solder main voltage connections! If u do not feel like doing this, u may should use a extension for the PSU mains connection. If u want to use an extension, u can contact me and i try to add a 3D model do integrate…

Pobrania
2
Polubienia
0
Ocena
0
P
Printables

Forma I mATX PC case

Forma I Alternative link (Free): https://makerworld.com/en/models/3132314-forma-i-matx-pc-case Default Dimensions: Length 345.7mm, width 161mm, 278mm (w/ 15mm feet) Supports Mini-ITX and mATX motherboards, 325mm GPU, 135mm CPU cooler and…

P
Printables

Simple mATX form PC chassis - bigger version

Remix of Simple mATX form PC chassis for the use with external AC/DC power adapter. This can accommodate bigger board.

P
Printables

Budget-friendly & compact mATX case with ATX PSU

KIND REMINDER: If you plan to build in this case, please make sure to read the full description as it may contain important details affecting your specific building plans. Unique looking Micro-ATX case designed specifically to be both…

P
Printables

ATX/mATX/ITX PC Case | Open Motherboard

on photo mATX (ASRock B650M Pro RS WiFi) and ATX (ASUS Maximus V Formula) variants

P
Printables

Strong mATX 10" 2U-Rack Plate – Support-Free Design

It has been tested on a KWS 10" rack and fits perfectly. This point is important: to minimize bending and long-term creep, the plate is supported both on the front panel and against the inside of the back panel. I designed this because…