P
PrintablesPrusa Research
i3 MK2S to MK3S Upgrade Printable Parts
Original Prusa MK2S to MK3S Upgrade printable parts. Note, this is a legacy download. This is the upgrade to MK3S, not the newer MK3S+.
- Pobrania
- 1657
- Polubienia
- 58
- Ocena
- 5
Wyniki wyszukiwania: mk2s
124 modeli
P
PrintablesEvofab Inc.
MK3S & MK2S LCD COVER
LCD cover for prusa MK3SMMU2S & MK2S Print instructions LCD COVER STL FILES: 1- You need to download only these files lcd-cover-mk3s_assy.stl or lcd-cover-mk2s_assy.stl knob_assy.stl 2- Split the parts into PrusaSlicer to assign extruders…
- Pobrania
- 1413
- Polubienia
- 106
- Ocena
- 4,83
P
PrintablesPrusa Research
i3 MK2 to MK2S Upgrade Printable Parts
Original Prusa i3 MK2 to MK2S Upgrade. This is a legacy download.
- Pobrania
- 938
- Polubienia
- 46
- Ocena
- 0
P
PrintablesPrusa Research
i3 MK2S to MK3 Upgrade Printable parts
Original Prusa MK2S to MK3 Upgrade printable parts. Note, this is a legacy download. The neccessary hardware for the upgrade is not sold anymore as a bundle. This is the upgrade to MK3, not the later MK3S nor MK3S+.
- Pobrania
- 863
- Polubienia
- 40
- Ocena
- 5
P
PrintablesPrusa Research
i3 MK2S Printable parts
All printable parts for your Original Prusa i3 MK2S. Print instructions: Use Prusament PETG and the PrusaSlicer's default PETG 0.2mm presets.
- Pobrania
- 7517
- Polubienia
- 173
- Ocena
- 5
P
PrintablesPetclaud
Extruder motor rotation indicator (Prusa i3 MK2/MK2S/MK3/MMU2)
Just another design for an extruder rotation indicator/visualizer. Print, glue a 8x3mm Neodymium magnet to it and snap it onto your extruder motor. I have used CorrugatorSupercilii's OpenSCAD Turbine Propeller Generator to generate the…
- Pobrania
- 844
- Polubienia
- 101
- Ocena
- 4,67
P
Printablesacorderob
Tool Holder for Original Prusa i3 MK3 & MK2/MK2S
Tool holder for the Prusa MK3 (and MK2/MK2S). Made for the tools I use the most. The version for the MK2/MK2S is the same except for an additional 5mm in the length of the clip. Photos are from a previous version but there is almost no…
- Pobrania
- 581
- Polubienia
- 37
- Ocena
- 4
P
Printablescimoalpacino
Prusa MK2/MK2S/MK2.5/MK3 R3 angled fan nozzle duct remake
This is the original fan duct of MK3, but I modified the middle 2 openings to make them a little bit smaller on the front, since it cooled the tip of my hotend so much to clog the extrusion. This way the air is forced in a more downward…
- Pobrania
- 494
- Polubienia
- 27
- Ocena
- 5
P
PrintablesSoundDoc
Prusa i3 MK2S No Mod Cable Chain Kit - All Axis
Want to add Cable Chains to your MK2S but don't want to modify or reprint the Rambo Case or Extruder assembly yet? Then this might just be for you... Looking to add cable management to replace zip ties? This might also be for you...…
- Pobrania
- 451
- Polubienia
- 74
- Ocena
- 4
P
Printablesjgentry
Improved Spool Holder for Original Prusa i3 MK2 / MK2S
The original (see remixed section) worked great for a long time but the part that connects to the printer frame started to loosen up and eventually the spool holder fell off, spool and all. This model improves on the original design by…
- Pobrania
- 424
- Polubienia
- 24
- Ocena
- 5
P
PrintablesAtiiD Fix
Full printed Prusa i3 Mk2S Clone
Full printed Prusa i3 MK2S Frame and bed base from PETG. Can you assembly this frame by M3 bolt and nut. I modded some parts because this frame and bed base 2mm thicker that original aluminium frame. I modded i3 Bear RAMPS 1.4 electronic…
- Pobrania
- 326
- Polubienia
- 36
- Ocena
- 5
P
PrintablesRaybo
Extruder Cable Clip for Prusa MK2, MK2S, MK2.5 and MK2.5S (New Sticky version will work on MK3!)
Easy print, fits the Prusa MK2, MK2S, MK2.5 and MK2.5S. I added a new (Sticky) version that attaches with double sided tape. (3M, Gorilla, etc.) This new (Sticky) version will work on all MK2 and MK3 printers!
- Pobrania
- 296
- Polubienia
- 57
- Ocena
- 5
P
PrintablesRyan1705
Toppers for Prusa Printers (MK2, MK2s)
Ever since I got my Prusa those hexagonal holes at the top Z-axis mounts have longed to be filled, this is my humble attempt at adding some flair to the otherwise purely functional printer. feel free to remix, and make your own. this…
- Pobrania
- 232
- Polubienia
- 22
- Ocena
- 4,83
P
PrintableseKacarski
Prusa I3 MK2/MK2s Filament Guide (wide slot)
Slot type filament guide, useful if you print tall objects and full 1kg spool Update 2018-09-06: added small notch for easier placing of the filament in case you already put it in the extruder (needs to be sliced after print) Update…
- Pobrania
- 197
- Polubienia
- 17
- Ocena
- 5
P
Printablesntdesign
MK4 / XL Knob for MK2s / MK2.5s / MK3s
XL / MK4 style LCD knob for the older printers. I just mashed up the files to get proper fit and distance to the panel face. Compatible with the beauty ring: https://www.printables.com/model/680112-mk4-xl-knob-beauty-ring (original…
- Pobrania
- 188
- Polubienia
- 23
- Ocena
- 4,88
P
PrintablesRyan1705
![Rotating Prusa Death Star Topper [Mk2s , Mk2]](https://media.printables.com/media/prints/1667/images/10605_95f2adcd-5755-4541-a888-878a7df3288a/72ba537fea64fbab95b2ae67b65a354d_preview_featured.jpg)
Rotating Prusa Death Star Topper [Mk2s , Mk2]
After much testing, it is complete. I present the Rotating Death star. you will need to print the Hex base, Z-gear and the Death Star Gear. The blank one if for remixes (detail below). I have been warned that this may cause layer shifts…
- Pobrania
- 170
- Polubienia
- 15
- Ocena
- 0
P
PrintablesPetclaud
Prusa i3 MK2/MK2S/MK3 Filament Guide with reces for cables / wires
Wrodz designed this filament guide: https://www.thingiverse.com/thing:2341182 - all credits to him. I just added a few things to make it fit for my application: added a reces on the back side, since I have some wires running there for the…
- Pobrania
- 165
- Polubienia
- 12
- Ocena
- 5
P
PrintablesDocWilco
Magnetic extension for Prusa MK42 heatbed (used in MK2/MK2S)
I wanted to add magnets to my MK2S, which has the MK42 heatbed. The assembly manual warns that the thread in the headbed is very delicate, so I didn't want to unscrew it to dremel out slots for the magnets. So instead I made some holders…
- Pobrania
- 153
- Polubienia
- 37
- Ocena
- 5
P
PrintablesSoundDoc
Prusa i3 MK2S SketchUp Dynamic Model (automatic bed/hotend position)
As requested by another user, I decided to post the SketchUp model file I use to build/measure most my printer parts off of. Most of the printed parts are copies of STL, OpenSCAD and DXF releases from original Prusa Git. License GNU GPL…
- Pobrania
- 140
- Polubienia
- 7
- Ocena
- 0
P
PrintablesSoundDoc
Prusa i3 MK2S 80mm PSU Fan Mount (2 options)
At the request of mrhappydude I put together a PSU fan mount for the MK2S. This initial version isn't for a 120mm fan as he requested, its for a 80mm fan instead (I didn't have any 120mm fans handy). Option 1: This mount should support…
- Pobrania
- 140
- Polubienia
- 22
- Ocena
- 5
P
Printableshackoholic
OctoPi Case for Prusa i3 MK2S and MK3
If you look at hofftari's original case that I remixed He lists the following hardware: 4x M3x16 screws for the case 2x M3x8 screws for attaching the case to the frame. Changed description to include MK3 since it fits in the same holes on…
- Pobrania
- 137
- Polubienia
- 24
- Ocena
- 5
P
PrintablesTheNore
Dual Ikea Ledberg mount to Prusa MK2/MK2S/MK3/MK4 Z-top
this is a perfect low profile light design modified for easier wiring, and screw mounts with square nuts. This is to be used with the Light box mount. The MK4 will have to install the modified Z mounts I made here: Here Lights: Here…
- Pobrania
- 126
- Polubienia
- 12
- Ocena
- 5
P
PrintablesINeedOneDesigns
Prusa MK2 MK2S MK3 Web Cam Bracket with Tripod Style Mount
Designed this some time ago but here it is now. A Web cam bracket for the Prusa MK2 or MK2S with a (tripod style) mount and bolt. I changed my layer height from 0.2 on the bolt when it got to the thread and printed at 0.1 The large screw…
- Pobrania
- 123
- Polubienia
- 12
- Ocena
- 0
P
Printablesfreedom2000
Turn your Prusa i3 mk2s into a pen plotter (+ pen holder)
This is a simple penholder for your Prusa i3 mk2s printer. It will convert it into a fully functional Pen plotter without disassembling anything. The Slic3r settings are given. (See the PenPloter_Slic3r_Config.ini and config_Bundle files)…
- Pobrania
- 121
- Polubienia
- 22
- Ocena
- 0
P
PrintablesKael
Rectangular trash can MK2S full build plate
After starting to use my 3d printer I realized that a trash can nearby is a must-have! I design this one to utilize all the available space in my MK2S. I made mine about 6 years ago in PLA, the picture is from now 2023, so it has seen…
- Pobrania
- 120
- Polubienia
- 14
- Ocena
- 5
P
PrintablesDockGuy
![Mk3 style Y belt holder for Prusa Mk2.5 / Mk2 / Mk2s [Mk42/Mk52 12v heatbeds]](https://media.printables.com/media/prints/35703/images/353134_8b23af4b-5aed-494c-ad86-9e8eb407a9f8/bcfe09fe5a75be63615187a9088cf5c5_display_large_35.jpg)
Mk3 style Y belt holder for Prusa Mk2.5 / Mk2 / Mk2s [Mk42/Mk52 12v heatbeds]
Edit: Don't bother with this. Instead use Prusa's new Mk3s 2-piece design with integrated belt tension adjustment which will work on Mk2 and above printers. See "Y-axis parts: here:…
- Pobrania
- 118
- Polubienia
- 7
- Ocena
- 0
P
PrintablesDave
Garmin Descent MK2S Protector
Print the protective case upside-down (ring at bottom) in TPU, and the pin+cap in a hard material like PLA. Post-Printing: Place the pin through the protective case from inside the ring. Glue the caps on the pins such that they are now…
- Pobrania
- 116
- Polubienia
- 5
- Ocena
- 0
P
PrintablesHamlinJacob
MK3S & MK2S Bear Copperhead Extruder with Bondtech Idler Lever
This extruder is a remix of the Bear Extruder for the Copperhead hot end made by Slice Engineering with the addition of the bondtech idler lever arm. I made models for both the groove mount and screw mount variants and will fit the MK3S…
- Pobrania
- 116
- Polubienia
- 6
- Ocena
- 0
P
PrintablesPetclaud
Easy Spool Holder for Prusa MK2/MK2S/MK2.5/MK3) - updated
This is a remix of my earlier published Spool Holder, which was already a remix of IsmaelPR1's Easy Spool Holder as found here: https://www.thingiverse.com/thing:1768975 In the previous version, AGremlin commented that at the maximum z…
- Pobrania
- 111
- Polubienia
- 13
- Ocena
- 0
P
PrintablesMartinHopkinsDesign
X Axis Camera Mount - MK2s / MK2.5
MK2S / MK2.5 Webcam mount to monitor prints remotely whilst away from the printer. I've designed this mount to work with any standard tripod screw although the screw will need to be long enough to go through the 10mm arm prior to to…
- Pobrania
- 109
- Polubienia
- 9
- Ocena
- 0
P
PrintablesSheepMe!
LCD Display Cover for Prusa MK2/MK2S/MK3/MK3S/MK3S+
LCD Display Cover for Prusa MK2, MK2S, MK3 and MK3S with 85 mm Display cut-out and MK3S+ with 80 mm display cut-out. You will find both versions of the LCD cover in the files. Print instructions A 0.4 mm nozzle and a layer height of 0.20…
- Pobrania
- 97
- Polubienia
- 8
- Ocena
- 4,25
P
PrintablesAndi
Prusa i3 MK2S shorter LCD support
Shorter LCD supports for the Prusa i3 MK2S to make it fit better into my lack enclosure. I found that even with the 45° heatbed cable support ( https://www.thingiverse.com/thing:2862941 ) the Prusa i3 MK2S is too big to fit inside the…
- Pobrania
- 94
- Polubienia
- 7
- Ocena
- 5
P
PrintablesSoundDoc
Prusa i3 MK2S Adjustable Spool Holder
Searching for a solution for some new spools that came with a recent filament order whcih didn't fit on the original holders, I came across Aero3D's remix of a couple of other designs and it was almost exactly what I was looking for.…
- Pobrania
- 93
- Polubienia
- 16
- Ocena
- 5
P
PrintablesMarcoZ76
Prusa MK2S Frame brace perpendicular helper
I have designed those perpendicular helper to do easy installation of the Y axis. Print two of these in PETG or ABS Print instructions Category: 3D Printer Parts Print Settings Printer: Prusa i3 MK2S Rafts: No Supports: No Resolution:…
- Pobrania
- 87
- Polubienia
- 14
- Ocena
- 0
P
Printablesjomarin
Larger RAMBO case for MK2S / MK2.5S
I was searching for a larger electronics case for my Prusa MK2.5S and found this XY case by Carter : https://www.printables.com/model/1910-yz-case I was not sure if it would fit on the MK2.5S, so I decided to redesign my own case in…
- Pobrania
- 84
- Polubienia
- 11
- Ocena
- 3
P
PrintablesMatticus Finch
Prusa MK2S, MK2.5, MK2.5S Z-Axis Reinforcement/Brace
With the introduction of the new Prusa MK3(S) frame, I wanted to make my MK2.5S similarly rigid, if not more so. There were a couple great options, such as this: https://www.thingiverse.com/thing:1656945 This design and others came with…
- Pobrania
- 84
- Polubienia
- 12
- Ocena
- 4,5
P
PrintablesPetclaud
Easy Spool Holder slightly tweaked (Prusa MK2 / MK2S / MK2.5)
UPDATE: Considering the comment provided below, I decided to redesign a bit to increase clearance between the extruder and the spool holder. The new version can be found here: https://www.thingiverse.com/thing:2904072 or here:…
- Pobrania
- 83
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRobin Frisk
MK2s Y-belt holder
This is a remix of OCDs belt holder, that did not fit my version of the Prusa MK2s which is the later revision. It is basically his idea of the belt going straight trough the carriage holder applied on the original belt holder part from…
- Pobrania
- 80
- Polubienia
- 3
- Ocena
- 0
P
PrintablesmisterT
Mechanical Filament Runout Sensor for Prusa MK2, MK2S
New version of the filament sensor from NSGrimace using the snap-on design from CNCKitchen. As optical sensors usually have problems with translucent and transparent filaments, a mechanical microswitch is a good solution to reliably check…
- Pobrania
- 78
- Polubienia
- 13
- Ocena
- 0
P
PrintablesMavric
Prusa i3 MK2s / MK2.5 Bearing Holders
Bearing holder for MK2s Category: 3D Printer Parts
- Pobrania
- 75
- Polubienia
- 6
- Ocena
- 5
P
PrintablesSkermiebroTechTips
BEST fan nozzle for i3 MK2s
made this as I wasnt gettinng the right ammount of cooling on my printer
- Pobrania
- 75
- Polubienia
- 9
- Ocena
- 5
P
PrintablesVirtualGentlemen
E3D Vulcano Fan Shroud / Fan Nozzle for MK2S
Nozzle I made for the Volcano Heatblock on the MK2S, since there was not a single option on this site. To Install the Volcano Heatblock you just neet to swap the Heatblock with the normal one and put on this fan nozzle instead of the…
- Pobrania
- 74
- Polubienia
- 1
- Ocena
- 0
P
PrintablesA L Bistline
Prusa Face Shield - Prusa i3 MK2s - Fortified Base
The base of my first set of face shields wasn't strong enough to hold the bend of the plexiglass. To fix that, I created a fortified base with much better results. The file "fm_single..." includes one complete Prusa RC3 face shield with…
- Pobrania
- 73
- Polubienia
- 0
- Ocena
- 0
P
Printablesstevehlau
Original Prusa i3 MK2S RamBo Board Cover with extended vent holes for maximum cooling (Modded from the official STL from Prusa)
All credit goes to Josef Prusa and his team or whoever create this RamBo board cover for the Original Prusa i3 MK2S. I pretty much just extend all the vent holes on the cover for maximum cooling for the RamBo board. Therefore, it should…
- Pobrania
- 71
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGiles Bathgate
Extruder motor rotation indicator (Prusa i3 MK2/MK2S/MK3)
Visualise extruder motor movements
- Pobrania
- 71
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRichard M
mk2s y-motor with reinforcement
y-motor with extra bolt hole that isn't strictly necessary. Print instructions This is a merging of a previous remix and the mk2s design with the endstop. I just like the extra support of another bolt in the motor. Previous design: i3…
- Pobrania
- 66
- Polubienia
- 6
- Ocena
- 0
P
PrintablesFoppemoa
Prusa MK2S top LCD holders
I remixed the holder (from: https://www.thingiverse.com/thing:1918473 ) so that it would be angled more vertical on top of the printer, since the original version was angled a bit too much upwards when inside of a LACK enclosure. Print two.
- Pobrania
- 64
- Polubienia
- 7
- Ocena
- 5
P
PrintablesSidbitters
Mk3 Motor X End With Switch Mount Added For Mk2s
I have added a gcode for Priline CF PC with a slightly wider switch mount and also I make the switch mount 80% infill.
- Pobrania
- 63
- Polubienia
- 8
- Ocena
- 4,8
P
Printablesstevehlau
Original Prusa i3 MK2S Extruder Remixed (fits aftermarket probe)
Remixed from the Original Prusa i3 MK2S. This extruder body can fit a longer 8 mm aftermarket inductive sensor instead of PINDA. I made it to have enough clearance to fit a longer sensor in its original location. Please noted that the one…
- Pobrania
- 62
- Polubienia
- 5
- Ocena
- 0
P
PrintablesNohWhun
Camera Holder for MK2S/MK3
Raspberry Pi Camera holder for Prusa i3 MK2S/MK3. Slides into place underneath printbed.
- Pobrania
- 61
- Polubienia
- 1
- Ocena
- 0
P
Printablesoutcastrc
Prusa Mk2s to MK3 frame Y motor mount and power supply adapter
Using the extruded alum with the mk2 frame the power supply holes didn't line up so included is a adapter to space them correctly. Uses m4x8 button head screw and nuts. Y axis Mk3 motor mount with limit switch to convert Mk2s to be able…
- Pobrania
- 61
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMartin
***UPDATED*** Prusa i3 Mk2S Camera Mount (Using standard tripod mount)
THIS IS AN UPDATED VERSION OF MY ORIGINAL CAMERA MOUNT FOR THE MK2S Update includes Extend Arm to clear the noctua tilted fan upgrade Camera arm pushed back for a clearer image (Also helps clear the noctua fan) Brace added to arm to stop…
- Pobrania
- 58
- Polubienia
- 12
- Ocena
- 5
P
PrintablesSebastianmaklary
Prusa i3 Mk2S print fan duct/nozzle
A fan duct that spits out the air both from the sides and from the front. The "arms" that ducts air to the sides are made to immitate a flow-optimized design with large curves and an internal rib to guide the air but no CFD analysis has…
- Pobrania
- 56
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLucipher
Prusa I3 MK2/MK2S Adaptor for 40mm Fixed Screws
I printed up the original version of this fan adapter by Area51 twice, thinking I had messed something up in my settings. It turns out the fan screws were carved out at M2.5 rather than M3. So I modified the step file, carved out the fan…
- Pobrania
- 56
- Polubienia
- 7
- Ocena
- 5
P
PrintablesDan
Prusa MK2 MK2S MK2.5S Mean Well LRS-350-12RS (12V) PSU Mount
Allows you to replace the stock PSU with the popular Mean Well LRS-350-12RS PSU for Prusa MK2 based printers.
- Pobrania
- 56
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPetclaud
Prusa i3 MK2/MK2S/MK3 Webcam (Fish Eye) support and Strain relief
I mixed together various 'things' I found on Thingiverse and created this universal support platform. Credits to the original designers! This is a support platform to fix various 'things' to your X-motor and acts as strain relief for the…
- Pobrania
- 55
- Polubienia
- 5
- Ocena
- 5
P
PrintablesSkermiebroTechTips
i3 Mk2s fan duct advanced (with no text)
I had some trouble printing this in ABS so I removed the text for better printing. If you print please post a make as I love seeing them there is a new version up on my profile soon for the thicker leadscrew holders Print Settings…
- Pobrania
- 52
- Polubienia
- 6
- Ocena
- 0
P
PrintablesTheSpyGamer
Ring Knob for MK3, MK2, MK3S, MK2S
This is a remix of the Prusa i3 LCD Knob (Inspired by Original Prusa i3 MK2)( https://www.prusaprinters.org/prints/11397-prusa-i3-lcd-knob-inspired-by-original-prusa-i3-mk ) by stevehlau.
- Pobrania
- 51
- Polubienia
- 5
- Ocena
- 0
P
Printablesthr333ddd
Half bear upgrade prusa i3 mk2 mk2s. 2040 Y-axis frame extrusion no drilling
I'll be adding more files for the rest of the printer parts as I go. 9/23/22: Added the rest of the files for the Y carriage. It is all done. Half bear upgrade for the Prusa i3 mk2 mk2s frame. I bought the frame and the carriage, so this…
- Pobrania
- 50
- Polubienia
- 16
- Ocena
- 0
P
PrintablesAdam - Vector 3D
Replica Prusa i3 mk2s Power supply cover
When making my Prusa i3 mk2s replica I could not obtain the exact model of power supply that was used so I had to design my own cover. This cover fits with the rest of the original design apart from the mounting point on the main frame…
- Pobrania
- 49
- Polubienia
- 6
- Ocena
- 0
P
PrintablesRichard M
TR8 mk3s/mk2s x-ends and z-axis-top
Modification of mk3s x-ends and z-axis-top for use with TR8 lead screw, endstop block returns, taller nut trap for belt tightening. Print instructions After printing run a 3mm drill slowly through the inside bolt hole, I've reworked the…
- Pobrania
- 49
- Polubienia
- 3
- Ocena
- 0
P
Printableschriswal
Prusa I3 MK2S Cover for Power Supply S-400-12
This is a cover for the S-400-12 Power Supply for a Prusa I3 MK2. License GNU GPL v3 This is a modified Version of the openscad file von J.Prusa The mount holes on the frame need to be changed.
- Pobrania
- 49
- Polubienia
- 1
- Ocena
- 0
P
PrintablesJRP7743
LCD support B for MK2S with BIQU/RepRap LCD Display
If you've got a Prusa MK2S, or MK2.5S, and have a reprap replacement LCD display (looks identical to the stock display, but has a MUCH bigger potentiometer on the back), use this LCD support B part (with your original LCD support A), to…
- Pobrania
- 48
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPantsManUK
NEMA (extruder) motor rotation indicator Manx Triskelion (Prusa i3 MK2/MK2S/MK3)
I really liked Petclaud's visualisers, so I thought I'd have a go at making one of my own: this is the result. Designed to have an 8x3mm magnet on the back (the keen-eyed will notice I'm using blu-tack when I took the photograph, need to…
- Pobrania
- 44
- Polubienia
- 7
- Ocena
- 0
P
PrintablesStoo
Prusa I3 MK2S Filament Guide
Just a filament guide, but based on the mount for the IR LED holders, which works far better than the one I was using before (It didn't clamp the mount properly). Printed with supports which are mostly for the loop. Print Settings Printer…
- Pobrania
- 42
- Polubienia
- 4
- Ocena
- 0
P
Printableslavachemist
Prusa i3 MK2S X Ends With Tighter Tolerance
Original X ends with slightly smaller bearing channels.
- Pobrania
- 39
- Polubienia
- 5
- Ocena
- 0
P
PrintablesGW Marshall
Prusa i3 MK2S X-axis adjustable idler
There have been reports of the x-axis belt getting worn by the x-axis idler pulley on Prusa i3 MK2S printers. Happened to me. Looked for a decent solution but didn't see one. So I remixed the Prusa x-axis idler. I wanted something that…
- Pobrania
- 39
- Polubienia
- 2
- Ocena
- 0
P
PrintablesGustavo
Prusa i3 MK2S - Logitech C270 camera Heat Bed
I upgraded http://www.thingiverse.com/thing:2069256 for proper use with new Logitech C270 camera. Changes / adds: camera mount fix added material support for long arm and mount to avoid camera wobble long arm weight +0,5mm (stronger…
- Pobrania
- 38
- Polubienia
- 5
- Ocena
- 2
P
Printablesget3d on
Filament Guide Ball joint For Prusa MK2S
Remixed and Made it compatible with Prusa Mk2S which is 6mm not 10 mm. Works GREAT! printed with 5% infill 3d Honeycomb no supports Remix of https://www.thingiverse.com/thing:1358776 Category: 3D Printer Accessories
- Pobrania
- 38
- Polubienia
- 8
- Ocena
- 0
P
Printableshallonhatt
PINDA protector for Original Prusa i3 MK2S
I made a PINDA protector cap that fits the MK2S extruder mount to prevent badly warped parts to get stuck on it while printing. Edit 28/10 2017: Since some people had problems with fitting the original model with the m8 threads I made one…
- Pobrania
- 37
- Polubienia
- 5
- Ocena
- 0
P
PrintablesChris P
OctoPi Case for Prusa i3 MK2S and MK3 with exposed GPIO ports
I just sliced a part away so you can connect to the GPIO contacts...it's the same as this one https://www.thingiverse.com/thing:2334119 The USB cable in the picture is connected to the printer, I needed the GPIO ports for…
- Pobrania
- 36
- Polubienia
- 3
- Ocena
- 0
P
PrintablesSubSite
LED Strip Fixture for Prusa MK3, MK2.5 and Mk2S (non-restrictive)
A nice led strip fixture for Prusa i3 Original MK2S._ Does not restrict extruder movement This lighting solutions uses a popular self adhesive 12V LED strip (see image). Can be installed to use the printer's own 12V supply. UPDATE…
- Pobrania
- 36
- Polubienia
- 7
- Ocena
- 4,5
P
PrintablesRichard M
mk2s y-corner with no cut
y-corner without the bearing cut out, prints easier but can only be used on the side with one bearing. Print instructions Print and go.
- Pobrania
- 36
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSB Tech
Prusa i3 mk2S mk2.5s Y Axis X-Brace Skew Alignment
This model is 100% free and open-source. I don't run a Patreon or ask for tips—all I ask in return for the hours spent prototyping is that you hit the ❤ Liked button or post a picture of your build. It takes one second, costs nothing, and…
- Pobrania
- 36
- Polubienia
- 8
- Ocena
- 0
P
PrintablesSB Tech
Prusa i3 mk2S mk2.5S Y Axis Belt Tensioner no disassembly required
Made this Y Belt tensioner for 5mm or 3mm dual bearing idler pullies , after looking at a few different designs and thought they were lacking stability the way some of them tensioned with one screw gave it potential for alignment issues…
- Pobrania
- 34
- Polubienia
- 7
- Ocena
- 0
P
PrintablesRyan1705
Toppers for Prusa Printers (MK2, MK2s)
Ever since I got my Prusa those hexagonal holes at the top Z-axis mounts have longed to be filled, this is my humble attempt at adding some flair to the otherwise purely functional printer. feel free to remix, and make your own. this…
- Pobrania
- 29
- Polubienia
- 9
- Ocena
- 4
P
PrintablesFx137
Filament clamp for prusa i3 mk2s
Clamping system for clamping stiff filaments to the frame of the prusa i3 mk2 printer Print instructions Category: 3D Printer Accessories Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.15…
- Pobrania
- 29
- Polubienia
- 3
- Ocena
- 0
P
PrintablesStanley
Prusa i3 MK2S PSU Cover for 30x30 extruded aluminum profile
This is modified version of Prusa i3 MK2S PSU Cover for 30x30 extruded aluminum profile. It has a place for 5V relay module which controls PSU power state (RAMPS needs external power source). PSU cover is modified for 240W PSU, model:…
- Pobrania
- 28
- Polubienia
- 3
- Ocena
- 0
P
PrintablesBoby
Prusa i3MK2s fan duct advanced - "fiddler crab edition"
* Updated on 14th October 2018 - fiddler crab edition * Changes since last release: the left blower is now much, much bigger than before to improve cooling on the back side of the print. mount hole for the screw moved by -0,5mm in X and Z…
- Pobrania
- 26
- Polubienia
- 1
- Ocena
- 0
P
Printablesfreedom2000
Original Prusa i3 MK2s filament dust cleaner
A simple dust cleaner specifically designed for Original Prusa i3 MK2s. Just put a bit of foam inside and slide the dust cleaner on the extruder button Post-Printing if needed enlarge the hole with a 2.5mm drill Category: 3D Printer Parts
- Pobrania
- 26
- Polubienia
- 7
- Ocena
- 0
P
PrintablesMavric
Prusa Mk2s Heatbed Cable Bracket
I made this since there was not an upgrade for the older machines. I was trying to figure out why a used machine was having heat up delays and found out it was only holding on by one strand of copper. Print Settings Printer Brand: Prusa…
- Pobrania
- 25
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGMagician
Prusa I3 MK2S filament guides
This is my solution for filament guide in a Prusa i3 MK2S clone to be used in a Lack enclosure when Dondolo extruder is used. I mixed up two different solution to get my requirements. Since I don't want to feed filament from top, I want…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChicago Keri
Improved X and Y Idler Mounts for Prusa MK2s - MK2.5s
The wobbly X and Y idlers on my Prusa MK2s were driving me crazy, even though prints came out OK. The wobble originates at the 3mm bolts that act as axles for the idler pulleys... First, as the bolts are threaded and not precisely sized…
- Pobrania
- 24
- Polubienia
- 4
- Ocena
- 0
P
PrintablesWeaponsmith
Original Prusa MK2 MK2S Logitech C270 camera mount for X motor
This is a camera mount for the Prusa MK2/MK2S. The camera mount attaches to the left X motor and will move vertically with your print head, so that you can always see what it is printing regardless of height. You can orientate the camera…
- Pobrania
- 24
- Polubienia
- 1
- Ocena
- 0
P
Printablesme.mehta
Extruder cable support for Prusa mk2s
As we all know, Prusa's mk2s extruder wire connection slags sometimes and touches heatbed, which can lead to print fails as well as wire tear. To avoid such errors, I have designed a part that can support this wire bunch easily thus…
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 5
P
PrintablesPetclaud
Easy Spool Holder - Spool Safety Lock (Prusa MK2 / MK2S / MK3)
I have been using IsmaelPR1's spool holder ( https://www.thingiverse.com/thing:1768975 ) now for several months and have recently also made a remix of the spool holder which you can find here: https://www.thingiverse.com/thing:2661364 On…
- Pobrania
- 22
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRune M. Andersen
Bear Y belt adapter for MK2s/MK2.5 on Bear MK3 frame (tooth-mount for short belts)
This is a remix of "Bear Y belt adapter for MK2s/MK2.5 on Bear MK3 frame". https://www.thingiverse.com/thing:3468567 My Y-axis belt from the MK2 was too short, so I modified the belt adapter to require less belt for fastening. I'm not a…
- Pobrania
- 22
- Polubienia
- 2
- Ocena
- 0
P
Printablesleomyeggo
Prusa i3 MK2, MK2S, MK2.5, MK3 Light Fixture
Designed for this light bar (link below), which outputs good lighting for my MK2.5. I designed it so that you can use screw and nuts hardware(#2 machine screws and nut) to fix it to the light bar. This accomplishes 2 things: Avoid…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPaparazzi
MK2S idler adjustment tool for PLA and TPU
This very simple and fast to print tool will help you set the right and identical tension on the 2 idler screws on an MK2S for PLA or TPU. For PLA, Prusa recommends to set the length to 13mm For TPU, the second tool will set it to 14.5mm…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRaul Melnik
Prusa MK2S MMU1 Remix
He creado mi propio modelo de el sistema MMU1 para mí prusa MK2S ya que el original nunca me terminó de gustar fue creado en base del Sistems original Directdrive materiales nesesarios 4 rodamiento 625ZZ 4 bouwden 12mm 4 M6 x17mm 8 tuecas…
- Pobrania
- 21
- Polubienia
- 2
- Ocena
- 0
P
Printablesfreedom2000
filament runout sensor for Prusa mk2s printer
This is a very simple filament runout sensor to be added to your Prusa mk2s. I have choosen, for reliability reasons to use an endstop switch instead of an optical sensor. They are very cheap, easy to find on aliexpress…
- Pobrania
- 21
- Polubienia
- 7
- Ocena
- 0
P
PrintablesFoppemoa
Prusa MK2S Ribbon Cable Clip
I made this ribbon cable clip to hold the cables to the frame, when having the LCD mounted on top. It uses 2x m3x10 screws, to screw into the existing holes in the frame.
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
Printablesra100
![SU replacement brace for Prusa i3 MK2s_MK2.5 [v4]](https://media.printables.com/media/prints/300637/images/2629958_f687d4e0-51ce-4127-b477-a4df81aa187f/58e75f39bff7b273a2e97035345e8f55_display_large_300637.jpg)
SU replacement brace for Prusa i3 MK2s_MK2.5 [v4]
Modified a bit for easier M4 nut insert. Print Settings Printer Brand: Prusa Printer: i3 MK2.5 Rafts: No Supports: No Resolution: 0.2 Infill: 30% Filament: 3DXSTAT CF PETG Black Category: 3D Printer Parts
- Pobrania
- 20
- Polubienia
- 1
- Ocena
- 0
P
Printablesalromh87
MK2S Nozzle cover (Parametric height and text)
I built and MK2S but the nozzle I got from china was a bit longer than original E3D so I added a variable to original OpenSCAD model to allow adjusting the height of the cover, increasing Extra_height you can lower the bottom of the…
- Pobrania
- 19
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSpedi
Prusa i3 Mk2s 10mm Belt conversion
Why did I wanted a 10mm belt on my printer? Fast accelerating/breaking puts a lot of stress on the belt which can lead to unprecise positioning and overshooting the targeted position because of "micro-belt-lengthening" (belt acts like a…
- Pobrania
- 19
- Polubienia
- 7
- Ocena
- 0
P
PrintablesChicago Keri
Mk2S - 2.5S Y-axis motor and idler mounts for Mk3 aluminum frame
Have you upgraded your Prusa Mk2s - 2.5s to a Mk3 type frame with aluminum extrusions? If so, you will have noticed that the MK3 Y-axis motor mount is opposite of a Mk2s and has no limit switch. You could modify the wiring so that the Y…
- Pobrania
- 17
- Polubienia
- 1
- Ocena
- 0
P
PrintablesGCV3D
Prusa i3 MK3 & MK2/MK2S Tool Holder (Remix)
Overview I remixed acorderob's tool holder for the Prusa i3 MK3 & MK2/MK2S so that it could hold my assortment of 3D printing tools. There is a place for the following: Prusa i3 MK3 kit tools (including the glue stick and lubrication…
- Pobrania
- 16
- Polubienia
- 4
- Ocena
- 0
P
PrintablesDonnie
Custom Anet A8, Prusa Mk2S Y Carriage 220x220x5mm
Custom Anet A8, Prusa Mk2S Y Carriage 220x220x5mm
- Pobrania
- 15
- Polubienia
- 4
- Ocena
- 0
P
PrintablesGiampanos
Original Prusa MK2-MK2S-MK2.5-MK2.5S Light Brakets and spool holders
those are combo lights brackets and spool holders that i made
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFoppemoa
Prusa MK2S & MK3/S feet (for sorbothane dampeners)
MK3/S You will need the following for each MK3/S foot: 1x M4x10 button head screw 1x M4 nut 1x T-Nut ("TNut_3030_M4") 1x Foot of your choosing ("Foot_3030_XXmm") They will require a T-nut (remixed from:…
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0