949 modeli
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Wydruk około 0,70 €–0,86 € nettoWstępna wycena jednego wariantu
His partner: https://www.printables.com/model/1473177-alternative-christmas-deer-doe Print Tips Material: AzureFilm - PLA Silk Gold Layerheight: 0.2mm Structural Support: No Infill: Grid
Wydruk około 2,96 €–3,62 € nettoWstępna wycena jednego wariantu
Print Tested with PLA. Print instructions I recommend 15% to set the fill. Supports need to be generated on the printer bed.
Wydruk około 0,28 €–0,35 € nettoWstępna wycena jednego wariantu
Her partner: https://www.printables.com/model/1106795-alternative-christmas-deer-buck/files Print Tips Material: Sunlu - Silk Silver PLA Layerheight: 0.2mm Balanced Support: No Infill: Grid
Wydruk około 2,21 €–2,70 € nettoWstępna wycena jednego wariantu
An alternative plate for the modern spiral planter by SchulteGeileTechnik. Like and download his awesome model and leave a like as well. My print is larger version of the original. Therefore the plate has a inner diameter of 73 mm. It…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena jednego wariantu
Our Worx Landlord m500 tends to not only cut the lawn, but also dig new holes with the tires. In difficult situations the mower does not recognize that it is not turning - and uses a brute force move. Therefore I designed other wheels,…
Wydruk około 13,04 €–15,94 € nettoWstępna wycena jednego wariantu
The stock battery mount on the Happymodel Mobula 8 likes to break after some not-so-soft landings and snaps where the two crossbars connect to the side of the battery holder. This model replaces the crossbars and hooks into the sides of…
Wydruk około 0,08 €–0,10 € nettoWstępna wycena jednego wariantu
Pitch: Is your friend, coworker, or family member smoking? Would you like them to stop? It's easy! Just replace their smokes with these revolutionary therapy props. They will totally not hate you! Why did I do this?: No seriously, I made…
Wydruk około 0,60 €–0,73 € nettoWstępna wycena jednego wariantu
Designed as a Wiggly Eyes alternative for some of our Zipper Pull prints. Diameter: 12mm Thickness (White): 1.2mm Thickness (Black): 1.5mm Currently, there are two choices available – one design featuring a straight gaze and another with…
Wydruk około 0,04 €–0,05 € nettoWstępna wycena jednego wariantu
This model will support the NI Maschine Mikro mk3 on your desk, holding it up at a 20-degree angle in order to better see the LCD screen and buttons, and also making it a little more ergonomic for finger-drumming at arms-length. The…
Wydruk około 4,94 €–6,04 € nettoWstępna wycena jednego wariantu
The hood is not visible on the photos. The fuzzy skin gives a nice touch to the look. Printed in ABS-T to withstand the sun. Amternative to Canon EW-73D compatibel with RF 24-105mm F4-7.1 IS STM. Not tested on EF-S 18–135mm f/3.5–5.6 IS…
Wydruk około 1,84 €–2,25 € nettoWstępna wycena jednego wariantu
This is a 5 color print. Created using Hueforge and midjourney. Instructions are for bambu slicer and prusa slicer. Print at 100% infill with a layer height of 0.08mm with a base layer of 0.24mm (used a base layer of 0.24 to provide some…
Wydruk około 9,64 €–11,78 € nettoWstępna wycena jednego wariantu
This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…
Wydruk około 0,81 €–0,98 € nettoWstępna wycena jednego wariantu
Alternative mount for the ikea HJÄLPA which I use for filament storage in my PLATSA enclosure. You can use the screws supplied with the HJÄLPA they fit very snuggly into the holes. The included gcode prints 2 of the mounts at 0.20mm layer…
Wydruk około 1,51 €–1,84 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A holder thats fits the Ikea Hjälpa clothes rod.
Wydruk około 2,29 €–2,80 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This enclosure lid fits the Multisystem V5/V6 (2022/2023) console. It uses the same base but has a new lid, backplate, SDcard mount and reset button. You can now make your Multisystem console into the style of classic consoles, this ones…
Wydruk około 1,58 €–1,93 € nettoWstępna wycena jednego wariantu
UPDATE 21/08/2023 Battery is still full after 1 month and it still work perfectly. Will add new versions for different trackers like Kruidvat Smart Finder CozyLife AIYATO Tag (Without speaker) Introduction AirTag is too thick and…
Wydruk około 0,77 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 7,32 €–8,94 € nettoWstępna wycena jednego wariantu
Moody 2.1 alternativer Halter mit LED Beleuchtung für die Satelliten - Virtueller Pinball (VPin) Für meinen Virtuellen Flipper habe ich eine alternative Halterung für das Moody Soundsystem 2.1 entworfen. Ich wollte die Satelliten von…
Wydruk około 3,76 €–4,59 € nettoWstępna wycena jednego wariantu
Squiggly is a unique font designed using a technique using a single line and not lifting the pencil or crossing a line. Scaleable and easy to print. 0% Fill
Wydruk około 7,37 €–9,01 € nettoWstępna wycena jednego wariantu
I’ve attached the parametric model in Fusion 360 so you can adjust it to your REMIX. Here are the parameters. The print settings are intended for: Material: PLA Layer height: 0.2 mm Organic supports Infill: 70%
Wydruk około 4,71 €–5,75 € nettoWstępna wycena jednego wariantu
Simple print to allows for an alternate presentation of the Lego Saturn V during lunar module extraction. Printed in Jessie Premium PLA Bold Blue.
Wydruk około 0,76 €–0,92 € nettoWstępna wycena jednego wariantu
The Native Union Snap 3-in-1 charger ( link ) has an Apple Watch MagSafe charger but doesn't fast charge. I often plugged in the cable that came with my Ultra instead of using the one supplied with the stand. So, I built a mount that uses…
Wydruk około 0,98 €–1,20 € nettoWstępna wycena jednego wariantu
I didn't want to drill into the tiles, so I attached it to the side of the panel holding the large mirror. Nechtěl jsem vrtat dlaždičky => připevnil sem zboku na desku držící velké zrcadlo. Recommended material: PETG White
Wydruk około 1,35 €–1,65 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Use Calibration Bro to calibrate your printers X & Y E-steps, and Skew. Its a free alternative to the Califlower and/or Calilantern. Print Calibration Bro. Wait for it to cool down! Don't compromise the shape by removing it while hot &…
2024-10-10 - Improvements to the web-based worksheet, including an improved measurement map, and Plot.ly graphics to help visualize your results. Check out the wiki on Github ! This companion to the spreadsheet calculator and browser…
A Native American drone flute in F# tuned to A = 432hz I noticed there were only a few drone flute files available online and I wasn't quite happy with the quality of them so I took it upon myself to design one that I was happy with. It…
About Not a Key-Bak® (alternative) mount for Stealth Press 1 / 1S Made to be a less expensive retractable device alternative for Stealth Press , this is, definitely, not a Key-Bak®, but it sure works like one. Stealth Press is a highly…
ATTENTION! THESE PIECES ARE ONLY TO BE USED BY THOSE EXPERIENCING DIFFICULTIES FITTING CERTAIN PIECES TOGETHER FROM MY ORIGINAL MASTER SWORD DESIGN! Hopefully not many of you will need these pieces, but more than a few people who have…
You don't have a compressor but want to remove dust, wood shavings or other light dirt from your workplace? No problem! With this attachment for your cordless screwdriver, it's done in no time at all! Is it hot and you need to cool down?…
Welcome to GlennovitS3D. Join the Club on Printables.com to support creation of new models , get access to exclusive models , and get commercial rights, to sell prints. Join today - GlennovitS3D - or check out my model collection or my…
Updates: 25.11.2022 - the block (bird) must be printed on its side, with supports. The slicer should generate supports between the two wings in front of the block. This has been forgotten when making the tutorial video. Crafty makers can…
The hek lok requires no hardware to attach to the belt, but can use standard tek-lok hardware or M5 nuts/bolts to attach various items to the clip. Print instructions: PETG is an ideal material for the repeated flex of the clip, though…
these Figures are made by Frogkillerpl. I really love them. the Figures are not the original from the boardgame but very similar. at the moment i try a little bit to find the correct size and print procedure, so i cut the figures und…
Heyho Here I have a simple and oldshool 608 bearing alternative 4 you :) 2 Design options: Smooth & Toothed. 2 Tolerance options: 0,2 mm and 0,15 mm. Printing “advice” Set Seam to “random”. If you can print multimaterial (Prusa XL, ..)…
A simple Handle for the printers SD Card. This model belongs to the Ultimate Prusa casing. You can of course use it without the casing. Since all SD cards are slightly different in thickness, you may have to stick a small piece of tape on…
These pieces are nearly 40 cm tall and have a very small footprint. I truly have to discourage you from attempting to print these. I created these files by request. Unless you have an incredible amount of confidence in your printer's…
This is a second Native American style flute, following my F# model from Printables. This time it's a smaller flute in the key of A. Since it's smaller in size, it can be printed vertically (standing up, in 3 pieces) on smaller printers.…
I liked the design of the original by Andre Campos but needed different dimensions. So I started from scratch. I also wanted to be able to flip the drawers upside down and not have all the contents get mixed up or fall out accidently. So…
I liked the design of the original Useful kitchen model, but I missed the smaller variants - here they are! 100x185 mm 120x185 mm 100x240 mm Enjoy!
I've had numerious requests to see if I'd have a go at a StormTrooper Helmet. I'm still learning day by day so decided to have a go. It wast that easy and I'd used the help of other models availble here, but I believe I've come up with a…
Hi Jason, This is the only examples I have. I was going to make holes in the shell but though printing it would require more unecessary support, so opted out to just drill them in afterwards once printed. I've compiled 2 - 3 different eye…
Stand um für bspw. ManaBox o.ä. die MTG oder Pokemon TCG Karten einzuscannen. Druckbar ohne Support in 5 Stunden. Zusätzlich benötigt: 8x M3 Schraube mit 10 mm Länge inkl. Mutter Front wurde für den Cutout des Deckels angepasst. -----…
Since many like the other flower design and some asked if I could also make different ones, I decided to design these also from scratch to be nicely printable and don't need supports (I mean these are flowers, they should really be nice…
Four Part stand for the Native Instruments - Maschine MK3 This model does require some assembly and uses “Heatsets" as the threaded inserts holding the parts together. It's designed to be quite robust and has a 23deg angle for the…
It seems that the provided version is giving a hard time to most users during assembly, plus not giving a sturdy impression. So I made an easy to use version. No assembly. And it holds a fair amount of weight without wobbling as can be…
I liked the "Ender 3 V3 SE / KE Storage Box With Sliding Lid" remix but couldn't get a decent enough quality on my printer, so I decided to make the lid as simple as possible and add some localized texture to help with pulling it open.…
The hotend I bought was not an official creality one, not even sure creality makes that hotend. But can easily be found on amazon and aliexpress, just seemed like a better heatsink design. At the time of this writing I haven't tried it…
Update vom 12.04.2023: Neue, kürzere Endkappen für DC-Hohlstecker-Einbaubuchsen, 90° versetzt ( https://www.amazon.de/gp/product/B093FTFZ8Q/ ) für alle Versionen Update vom 13.03.2023: Neue Endkappen für DC-Hohlstecker-Einbaubuchsen (…
I've had several requests for a single piece blade for my Master Sword design. This will be perfect for belt printers!
The idea was to have a set of legs and feet that were easier to assemble and have lower center of gravity for certain balance movements like lifting one foot while standing on the other. To complete the robot you will need to download and…
Update: Added 120mm fan version A revised version which enables 120mm case fans to be mounted as lid has been added. I ran this setup with a fan powered by the AK2 Plus board directly for over a week without any stability problems. Read…
Alternative mouse shell for G305 - Semi Ergo Shape - GPRO Feet compatible - LiPo replacement. Best filament with most accurate results is Extrudr XPETG so far. It does not warp like PLA or regular PETG and has good sanding properties.…
This is a complete replacement for the Panda Touch 5" screen mounting system. It uses the original PCB with contacts from the original plate. *UPDATE 2.0* The updated version of the mount is designed to reuse the original magnets from the…
The Traktor Kontrol F1 is a micro DJ controller dedicated to controlling Traktor Pro’s “Remix decks”. As I’ve gotten one of these puppies just recently, I knocked up a stand for it. It’s 3 seperate parts, printable on smaller 3D Printers…
**Update 1/22/2017: I uploaded the .step files for your remixing pleasures. This is a printable "teklok" style mount. Use this for your mag carriers, shotshell caddies, knife holsters, whatever you want! I don't recommend using it to…
I'm using my Qidi Plus 4 very frequently. After a short time I have recognized that the PTFE tube to the printhead was somehow “sanded” by the lid and smeared the lid itself. To print a lid riser I was not motivated enough, so I have…
A statue of a native american tribe. An aku aku statue in a cartoonish look. Simple!
This drop-in replacement lid elevates the lid about 10 mm above the top-fan thus allowing for a much better airflow of the RAM/SSD cooling. I have measured more than 10K (10°C) difference on full power for DDRRAM temperature and 5K for…
Version 2 of my first and most popular model. Supports are needed but not too many. Strengthened because the first rev warped after a while. Get the obscenely large one!…
I didn't want to buy an original Keybak because it's expensive to get in EU. Planning to switch to motor brake PCB anyway. This fits cheap door pullers from aliexpress. I bought this one:…
Repaired and improved versions of coal load for Coal Wagon for Wooden Tracks from Michal Franta . The motivation for making this remix was the wrong size of coal load in original Coal Wagon from Michal Franta. This model has right…
This is the remix with longer back and front for increased stability and less wobble.
The "x2" in the file name refers to the number of printed parts. Depending on whether the coil is receiving or giving coil, you have to insert the corresponding adapter (with or without teeth), and glue it in (I use super glue for gluing…
This is the magic wand remixed with a modified bottom. I found the original hard to print (stringing and uneven surface). This remix adds an additional partial cone at the bottom, which provides a larger flat surface and steeper lower…
This tugboat is designed to be 𝘴𝘪𝘮𝘪𝘭𝘢𝘳 to the infamous #3DBenchy, while sharing absolutely zero geometry, planes, or critical dimensions. Due to a change in ownership of the Benchy asset, the new owners are removing all the wild,…
This solution is for who have filtraion fan taken from Prusa enclousre or Alveo3d Hepa Filter with fan, you just need to print this file, it would spend about 200g filament. If you don't have the parts either, don't mind. You could buy…
Check out the project website for more details and how to get the PCB . This device is an alternative to the TD-1 by Ajax. My Td-Free is cheaper, smaller, open source and wifi-enabled. V3 now contains a PCB for even easier assembly and…
This is a remix of the original RAK Meshtastic Starter Kit - No Additional Hardware Case which swaps out the mounting design for the PCB antenna with a mount that can be used for an IPEX/u.FL to SMA antenna cable. Using this antenna mount…
When in need of a Kato Unitrack Insulated Unijoiner , this 3D-printable solution is ready to click into place. Designed as an alternative to Kato’s 24-816 or 24-819 insulated rail joiners , it provides reliable electrical isolation for N…
I didn't like how the bed base was designed. the clearance from the front/rear of the rail was very small and it was bulky and too low in my humble opinion. I wanted to raise it a little so the springs will be tighter and allow more…
Updated 16-05-2026 with a CANVAS friendly version
Heyho Some days ago I built a wooden construction and I did not have any screw-in sleeves and the stores were already closed. So I designed this alternative. You can use the parts to secure a Nut or a Screw into your construction. If you…
CrunchLabs is a subscription box engineering kit designed by Mark Rober. CrunchLabs Box 1 is a disc launcher using a flywheel to throw small plastic discs. This project has variations on designs to get different results. Try them out and…
Deutsch : Mir gefällt die Anycubic-Lösung für die Halterung der eigenen Cam nicht. Da ich die Cam am Kobra 2 Pro und Kobra 2 Max im Frontbereich haben wollte, habe ich diese Lösung kreiert. Durch das Kugelkopfgelenkt kann die Kamera nach…
If you like my work and want to support me please consider supporting me on Patreon https://patreon.com/f2collectibles I did a couple of test prints at 75-120mm but If there are any issues feel free to contact me.
Ideal for a 40x40 fan thicker than the original( like the 40x20 Noctua Fan in Photo) or just for see the noozle while printing. More Silent than the original (due to a more open design) and with a better cooling. Materials: 2x 3M bolt…
Additional set of alternative Mini Mixing Pads I really liked the Disposable Mini Mixing Pad model. But I would have liked another arrangement of pads and spatulas. I think the mixing pad can find many different uses. All my variants are…
The FreeCAD file is included to make it easier to fine tune the parameters. The original spring was way too weak to turn the propellers. I decreased the number of turns and increased the thickness and growth to make this part stronger…
Remix Bin with no supports required for the handle, thinner walls and optional lid for this model
R1 > Radial grooves added R2>Traditional tread tyres adapted from https://www.thingiverse.com/thing:4892947
I was unsatisfied by the long print time for such a small part, so I thought of a quicker way to do the same thing. With my 1mm nozzle it takes only 3 minutes with 0.4mm about 7 minutes Update V2.0: that thing snaps secutrely in place and…
I needed replacement for original knobs/sliders because they are sticky from uv light so after couple years they useless. designed in fusion360. sliders are tight fit! Sequener pattern knob is difrent so i designed also this variant.
Here is a alternative REMIX of 3DPGVA Great design. Not for make it better but if you want to use original Z-Rod from the MINI. I did not testdrive the design as you can see in the pictures but I have printed a prototype and test…
If you'd like, you can replace the original handle 1:1 with this alternative one. Printing information Layer height: 0.2mm Infill: 10% Brim / Support: none I am looking forward to your Makes! :-) If you like this design, feel free to…
Overview This is a 3 Parts upgrade to your S2. All 3 can be done independently. All 3 will improve the performance of the S2 in their own area. I declare it as WIP as further testing showed varying results. Feet Replacement printable…
Few mounts compatible with other DeckMate system for Steam Deck printable parts that I thought could be useful. Double vertical “case” attachment Double vertical “case” attachment with backing 3 self adhesive, print in place universal…
I purchased and printed out Mikeprsmtl's all-in organizer but wanted to store my cards in one of the expansion boxes instead of in the main box. The Expansion Insert A holds all of the monster cards, as long as they are unsleeved and…
The centerpiece is a human skull with hollowed eye sockets and a visible nasal cavity. The jaw features defined teeth, and the chin area is decorated with raised, swirling patterns or engravings, giving it a stylized, artistic look.
Strongly inspired by the mounting system developed by KYZ Designs for the Honeycomb storage wall. I found trying to figure out which mount would be best for remixing hard, and loved the KYZ options for my HSW stuff, so figured I'd try to…
Alternative version of my stand for OXVA Xlim Pro 2 Vape Pen + Cartridge + Small Liquid Bottle ( https://www.printables.com/model/1068557-stand-holder-for-oxva-xlim-pro-2-vape-pen-cartridg ) One isn't necessarily better than the other,…
Native American Princess
Ma version est imprimable en 1 seule pièce et non 4. C'est un remix ;) N'oubliez pas de mettre en place votre changement de couleur ;) Lien original: https://www.thingiverse.com/thing:5149096/files Joyeux Noël
Dieses Modell ist im Massstab 1:24 und ist ideal für Resin Druck
A simple way to alternate the look of your Aqara U200 with a new front plate or cover. Printing tipps: enable “Only one wall on first layer” in quality settings (Bambu Studio / Orca Slicer) for a cleaner look center and then rotate the…
This is a 3D model of a line art “Haida” style whale design for decorative purposes. I'll probably post other similar designs in the future. It prints flat without support. Dimensions as printed are 105mm x 42mm x 5mm.
I designed an adapter to use a longer and more flexible cable for the CR-Scan Otter. This model is specific for this 3m long angled cable I found Amazon in Germany: Cabletex USB-C Cable . While I found two models on amazon.com that look…
This is my own design of a leather honing wheel. If you have the Tormek T8/T7 drive wheel it will fit. You can Upgrade your old SA-250 or Supergrind 2000 Versions with the original T8/T7 drive wheel as well! Alternative you can drill out…
This is an alternative body and wing for the 1/10 RC model kit TAMIYA Hotshot (1 & 2). Printing I recommend using PETG as the material for printing. PLA is quite rigid and may be too brittle for the rough RC environment. The printing…
![Alternative Case for AK2 Plus Intel N100 Mini PC (Firebat, Kamrui, NiPoGi) [Updated 120mm Fan Version]](https://media.printables.com/media/prints/926938/images/7229417_abf8bd94-445d-400a-9f74-0e1abaf2ebbb_0b6333b6-85d1-470d-b564-e040aaa0a8b8/ak2-plus_case_120mm_main.jpg)
