Wyniki wyszukiwania: qrp

Sortowanie

86 modeli

P
PrintablesDL2MAN

Housing for (tr)uSDX QRP Transceiver

These are the housing files for the (tr)uSDX Radio. Print in PETG / 0,15mm Layer Height / 20-25% Infill Tap (cut M3 Threads) into upper/lower Wall before putting inScrews. UPDATE - 11 July 2022: Added new Bottom Cover for Slide On Battery…

Pobrania
5998
Polubienia
213
Ocena
4,93
P
Printables3dprintguy

QRP dipole antenna for ham radio, or short wave listening

All components to print a center insulator, end insulators, and line tensioners to build a QRP dipole antenna for ham radio. I designed this for use with 6-32 screws, 18 gauge wire, SO-239 connector and 550 parachute cord. The antenna…

Pobrania
703
Polubienia
130
Ocena
4,83
P
Printablesn9dmt

QRP 40M EFHW Reel Style Housing

Overview This design combines the functionality of both a transformer housing and wire winder into a convenient package that is both easy to deploy and store. It is sized to hold an FT140-43 toroid and approximately 67ft of 18AWG wire,…

Pobrania
321
Polubienia
51
Ocena
5
P
PrintablesAdam Ziegler

QRP Labs QMX Case / Stand

A slip fit case for the QRP Labs QMX to protect the knobs and screen during travel, and act as a stand to better angle the display when in use. Print Settings Printer Brand: Creality Printer: Ender-3 v2 **Rafts:** No Supports: No…

Pobrania
236
Polubienia
23
Ocena
5
P
PrintablesGM5DNA

QRP Labs 20W Dummy Load Case

A simple case for the QRP Labs 20W Dummy Load Case (available from https://www.qrp-labs.com/dummy.html). Printed well in PETG, although I'm sure it would print equally well in PLA.

Pobrania
202
Polubienia
23
Ocena
5
P
Printablesoe7mbt

QRP Akkubox 12V und USB

QRP Akkubox 12V 4x 32700 Lifepo4 (natürlich auch kleiner Zellen wie 18650 oder 21700) BMS LifePo4 diverse M3 Schrauben 4x M3 Einschmelzmuttern 4x Anderson Powerpole 15A Quick Charge 3.0 USB Steckdose 12V Update: Mittelteil mit Breite 90mm…

Pobrania
176
Polubienia
29
Ocena
0

Simple stands for uSDR/uSDX 8-band SSB/CW QRP TRANSCEIVER

You can print two pieces for get a good stability. This stands is usefull for put your uSDR/uSDX (only for the model showed in the pictures here) at 20 degrees of elevation and avoid scratches in the box. It can be printed with any…

Pobrania
174
Polubienia
11
Ocena
5
P
PrintablesAlexF

Alternative Knobs for QRP Labs QMX Transceiver

The model contains an alternativ volume knob and a bigger VFO Knob. Additional needed Material: 2x M2.5 x 4mm socket screw (Madenschraube) Knobs Material: PLA or PETG Layerhigh: 0,2 mm Infill: 20% Softgrip Ring In order to put the flat…

Pobrania
166
Polubienia
9
Ocena
0

(tr)uSDX QRP Transceiver Stealth Face

This is a simple remix of the front facing plate from the official (tr)uSDX QRP Transceiver housing. It provides a drop-in replacement for radio operators who would prefer a stealth version with no text or labels. Print in PETG, 20%…

Pobrania
163
Polubienia
10
Ocena
5
P
Printablesoe7mbt

QRP Labs QCX+ (plus) Housing

Housing for the QRP Labs QCX+ (plus) CW Transceiver https://www.qrp-labs.com/qcxp.html Currently in progress …..

Pobrania
157
Polubienia
8
Ocena
0
P
PrintablesMiaoucat

Eclipse Antenna HF NVIS EFHW reel QRP QRO skywave 40m 20m 15m 10m band

Eclipse NVIS Antenna 40m 20m (15m) 10m this antenna is meant to be an all in one package for emergency NVIS communication. can also be used for POTA for those local QSO in your skip zone. the goal is quick deployment, lightweight and…

Pobrania
156
Polubienia
24
Ocena
5
P
Printables3DSistem

QRP Labs QMX+ enclosure

Simplified/free version of my case for QRPLabs QMX+ Case has slightly biger tolerances but precise soldering of front and back components is still needed. You can always drill the holes a bit if you mised position on some of them. XY size…

Pobrania
151
Polubienia
13
Ocena
5
P
Printablesfissi0n - K1TDG

Antenna Winder for K6ARK QRP Antenna

I used Orange Prusament PETG. This would work fine with almost any filament. No supports are needed. BOM I used the following parts..: 2 x M3 thread inserts 2 x 10mm x M3 cap head bolts 4 x 3mm washers 2 x 3mm Fork connectors Small amount…

Pobrania
143
Polubienia
29
Ocena
5
P
PrintablesKF0ARE

QRP-Labs QCX/QMX 6mm Low Profile Knobs

I wanted a slicker tuning knob for my new QMX radio. The conventional set screw 6mm knobs it came with were fine but I wanted something I could use to tune around by pushing with the tip of my finger rather than grabbing and turning. I…

Pobrania
137
Polubienia
25
Ocena
5
P
Printablesn9dmt

QRP Balun Housing

Overview This is a QRP balun housing I've been working on. It's nothing new in terms of what it can do, but it's a nice, compact package that requires only minimal hardware and is easy to assemble. I'm planning to use this in conjunction…

Pobrania
131
Polubienia
23
Ocena
0
P
Printablesmel0

QMXmicro - A small case for the QRP Labs QMX radio

A minimal set of covers for the QRP Labs QMX radio transceiver. The case is a little bit smaller than the QRP Labs metal case and about half the weight. Here is the same model on Makerworld for Bambu Lab printers . Bill of materials:…

Pobrania
130
Polubienia
21
Ocena
5

(tr)uSDX QRP Transceiver Stand

Inspired by stands I've seen for other tabletop electronics, here's a stand tailored specifically for the official (tr)uSDX QRP Transceiver housing ! You will need to print two of these, one for each side of the radio! This has only been…

Pobrania
123
Polubienia
15
Ocena
5
P
PrintablesZortness

QRP Labs QMX Magnetic Cover

This is a magnetic cover for the QRP Labs QMX radio. This uses common 6mm diameter by 2mm depth magnets. Since these are all hand built, I recommend printing the test file first. The SCAD file is included so you can make adjustments.…

Pobrania
115
Polubienia
14
Ocena
5
P
Printablesrimio

QRP transceiver microphone

This is a very simple microphone for use with small QRP transceivers like the QMX. It needs a common electret mic, a 3.5mm female jack, an endstop switch for PTT and two M3x12 countersunk screws.

Pobrania
109
Polubienia
15
Ocena
5
P
PrintablesAndrew Albinger
Pobrania
106
Polubienia
7
Ocena
5
P
PrintablesKYFriedHam

QRP Labs Dummy Load Case

This model is a small snap together case to contain the QRP Labs 20W Dummy Load. There are locating pins and standoffs that fit into the holes of the circuit board. These pins are rather small and care should be taken when inserting the…

Pobrania
86
Polubienia
11
Ocena
5
P
PrintablesLinas LY2H

Housing Box for the QRPLabs Dummy Load project

The filament used is Devil Design PETG. It’s printed on the Prusa Mini. This box is tailor made for the QRPLabs 20W Dummy Load project PCB. The bigger hole in the box is to accommodate snugly the supplied BNC connector, two smaller holes…

Pobrania
82
Polubienia
8
Ocena
0
P
Printablestrevor229

QRP Labs 20W Dummy Load Enclosure

Fitment might vary a bit based on how you assembled yours, but mine fits decently well. Print in PETG for heat resistance. Not too sure how it will react at 20W of heat sustained, YMMV… 30mm screws do peek out of the bottom by 4mm so cut…

Pobrania
81
Polubienia
8
Ocena
0
P
Printables3dprintguy

Accessory wire keeper and label for the QRP dipole antenna

These holder/labels work as accessories to the QRP dipole antenna center and end insulators. When cutting a wire to make the two elements of the dipole antenna I like to cut about 12” longer than expected to allow for tuning. After lacing…

Pobrania
78
Polubienia
11
Ocena
0
P
PrintablesDixieconstruct

QRPπ

First of all i'd like to excuse myself if the fit and quality of the files isn't perfect, this is my first design and i bought the printer for the express purpose of making this design for myself. The STLs are for the bottom keyboard…

Pobrania
71
Polubienia
11
Ocena
0
P
Printablesg7kse

QRP Guys EFHW tuner holder

A small part to hold the QRP Guys EFHW tuner onto a piece of standard plastic conduit when out and about on a sota summit. A few sizes of the thumb nut are included as it'll depend on if you'd like to glue the cap on or rely on a size for…

Pobrania
68
Polubienia
12
Ocena
3
P

QRP Labs QDX Case

This is a case for the latest (as of 2024-07) version of QRP Labs' QDX transceiver. I printed it with the smallest sides on the print bed with no supports, and had no problems. If you don't choose where the seams go they can get pretty…

Pobrania
67
Polubienia
5
Ocena
0
P
PrintablesBen Alexander

QRPLabs QMX/QCX-Mini Cover

A minimalist, press-fit cover for the popular QMX/QCX-Mini QRP transceivers produced by QRPLabs. Installs over the front of the radio to protect the screen, buttons, and knobs. When using the transceiver, the cover can be installed on the…

Pobrania
66
Polubienia
5
Ocena
0
P
PrintablesCarbonite74

QRP EFHW antenna housing

I designed this as a robust housing for the little K6ARK EFHW transformer. His design uses a proprietary PCB and tiny capacitor. My design allows for the use of larger through hole capacitors. It incorporates a panel mount SO-239…

Pobrania
66
Polubienia
16
Ocena
0
P
Printablespd3ron

QRP Quick Attach Strain Relief - Straight

Thread the antenna wire through the top 3 holes. Anchor with the bottom hole to take strain off of the antenna wire connection point. May consider hooking a rubber band with top and bottom holes, wrapping it around the part and hooking…

Pobrania
62
Polubienia
5
Ocena
0
P
Printablesmel0

Low profile knobs for the QRP Labs QMX radio transceiver

Low profile knobs for the QRP Labs QMX radio transceiver. What problem does it address? The default knobs are quite tall and pointy and difficult to operate with just one finger. This provided model is easy to rotate with just a thumb on…

Pobrania
59
Polubienia
10
Ocena
0
P
PrintablesOK1HRA

QRP Antenna balun with WAGO terminal

The 3D printed box contains a 10mm hole for sliding on top the Fiber glass mast. The PCB contains a terminal for soldering SMA or BNC connectors (not used in this implementation). VNA measurements screenshot are with a non-ideal 51 ohm…

Pobrania
57
Polubienia
19
Ocena
0
P
Printablesn3rDy

QRP Labs QMX Cover Protector

Simple cover to protect the rotary encoders and buttons on a QMX when in a pack. This version is for the original factory knobs. Print the main model by itself for a minimal cover or 2 of the round pieces and glue them to the main model…

Pobrania
56
Polubienia
9
Ocena
5
P
Printablespd3ron

QRP coil 110µH

QRP coil 110µH Credit To 9a4tvTom

Pobrania
55
Polubienia
8
Ocena
0
P
Printablesn9dmt

QRP Reel Antenna for 20M

Description This is a (likely over-engineered) QRP antenna system I've been working on for a while. The goal was to have something that was easy to deploy/pack and was somewhat self-contained. The design does not include a balun, but I…

Pobrania
53
Polubienia
28
Ocena
0
P
PrintablesHamRadioDude

EFHW QRP Antenna Winder - The Little Dudetenna - Ham Radio

The Little Dude (Tenna). QRP EFHW with BNC and tabs to snap on Wago connectors. Still PLENTY to do to this, but if you would love to test this out, I would love to see it in action. (Video coming soon) V2 is labeled MiniLite.stl and has…

Pobrania
51
Polubienia
11
Ocena
0
P
PrintablesKB9RLW

QRP antenna accessories.

These are enclosures for a 49:1 UNUN for end fed half wave antennas, a 9:1 UNUN for random length end fed wires, and a common mode choke. They are sized for T82-43 toroids. Each enclosure also includes an optional gasket that can be…

Pobrania
50
Polubienia
8
Ocena
0
P
PrintablesNT7S

QRP Antenna Components

Requires four M3x10 countersunk machine screws to fasten the lid. Sized to accept one 50 ohm BNC panel mount connector and two 7 mm thread binding post terminals. Included is two different designs for the feedpoint box. One is for a…

Pobrania
49
Polubienia
15
Ocena
0
P
Printablespd3ron

Threaded QRP Insulator

nice qrp threaded qrp insulator , large and small works great by me very nice All Credit goes to k0emt

Pobrania
46
Polubienia
3
Ocena
0
P
Printablesn3rDy

QRP Labs QMX+ Top Cover

I didn't want to drill holes in my original cover, so I created a cover I could modify as I wanted.

Pobrania
43
Polubienia
4
Ocena
0
P

QRP Labs 20W Dummy Load Case

This is a case for QRP Labs' 20W Dummy Load. I took inspiration from PH2LB's case , but it's been completely modeled by myself. If you happen to have exactly the same bolts I have this will be a perfect fit with everything completely…

Pobrania
40
Polubienia
1
Ocena
0
P
PrintablesMarcel Frehe

QRP growing Set

how to easy growing small plants and then repot without harming the plant? This is my anwser the QRP- Quick Recharge Planter The Support for 3 Planters is optional if u have another option to place your planters on. Manual: -Lay the…

Pobrania
35
Polubienia
6
Ocena
0
P
Printablesscarrson

Simple Portable/QRP Balun Enclosure

A simple Balun, easy to wire up and solder. No cover, just a simple thing for QRP / portable usage. Coax & ferrite core based on HF <30MHz designs. Use FT114-43 ferrite core (aka: Fair-Rite # 5943001001 ) Coax is type RG-174 BNC jack…

Pobrania
35
Polubienia
8
Ocena
0
P
PrintablesDK1MI

QRP Labs QMX+ enclosure with Powerpole connector

Original description: "Simplified/free version of my case for QRPLabs QMX+ Case has slightly biger tolerances but precise soldering of front and back components is still needed. You can always drill the holes a bit if you mised position…

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesJimSheldon

QRP Labs GPS Clock - Large (4x20) Display

Case i designed for the QRP Labs (qrplabs.com) GPS clock variation using a larger 4 line by 20 character display. Designed it with Fusion 360 and the .f3d CAD files are included so the user can customize the case to suit him(her)self.…

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesRik M0RKM

Amateur Radio QRP PD Decoy Case

This is a case for a PD Trigger fixed voltage decoy board that can be used to connect a PD capable USB powerbank to a QRP Amateur Radio. The chosen PD decoy trigger module is a Youmile 2 pcs PD/QC/AFC fast charge decoy trigger which is…

Pobrania
31
Polubienia
5
Ocena
0
P
PrintablesBernie Nazari

Bluetooth Speaker Mic for QRP Labs CMX transceiver

Modified Bluetooth adapter to fit the plugs of the QMX. Not sure if anything will be affected in the radio by using this, but it is working for me. Proceed with caution: I'm not winding any new toroids for you if you blow up your QMX.…

Pobrania
30
Polubienia
4
Ocena
0
P
Printablesdurfil

QRP Labs QCX-PA2 amplifier case

This is a very simple chassis to support a QRP Labs QCX-PA2 power amplifier. If you build the amplifier kit without an enclosure, the large heat-sinks are joined to the PCB only via the tabs of the power transistors, so everything can…

Pobrania
29
Polubienia
4
Ocena
0
P
PrintablesJimSheldon

4SQRP QRP Dummy Load Case

Print Instructions for the 4 State QRP Dummy Load Case. Print material: PLA, PLA+, etc. Material Color: Whatever color you like. Print Resolution: .2mm/layer. Special Instructions: Print the case with the flat bottom to the print bed and…

Pobrania
29
Polubienia
6
Ocena
0
P
Printables._.

QRP Labs QMX / QCX-mini Kneeboard with Magnetic Paddle Pad

Overview This is a kneeboard for the QRP Labs QMX that also fits the QCX-mini, which uses the same 95 x 63 x 25 mm case. The radio sits display-up in a shallow pocket and is held down by a single shock cord that stays attached to the…

Pobrania
28
Polubienia
9
Ocena
5
P
PrintablesRomek*Cyborg

Cover for QRP Pocket Transmatch

A cover for the QRP Pocket Transmatch by Phoenix Kits (https://www.phoenixkitsonline.co.uk) and sold by Kanga Products (https://www.kanga-products.co.uk). It protects the protruding knobs and switches from damage in transport. No supports…

Pobrania
28
Polubienia
2
Ocena
0
P
PrintablesN5DUX

Magnetic cover for MTR3B Currahee QRP ham radio transceiver

I reduced the size of the cover's openings from AB4BA's original design so supports are not necessary. The top of the radio is also smooth so it is less likely to get snagged in a carrying bag. Like AB4BA's original build, I used 6x3mm…

Pobrania
27
Polubienia
3
Ocena
0
P
PrintablesRandomMotion

QRP Guys EFHW Tuner Case

This is a snap shut case for the QRP Guys EFHW Tuner. The print of the top cover requires supports around the wire wingnut posts. The rest of it should do ok without supports. In fact, it is best to block supports for the divots where the…

Pobrania
27
Polubienia
4
Ocena
5
P
Printablesn3rDy

QRP Labs QMX Minimal Cover Protector

Simple minimal thickness cover to protect the rotary encoders and buttons on a QMX when in a pack. The four 10mm magnets can be 1.6mm-2mm thick. The knobs are slightly modified versions of the KF0ARE QMX knobs here on Printables. I added…

Pobrania
25
Polubienia
1
Ocena
5
P
PrintablesMurat A.

Pixie QRP Transceiver Case

(TR) Bu model, telsiz ve radyo amatörlerinin aşina oldukları "Pixie" QRP cihazının 51 x 51 mm. ölçülerindeki devre kartı için birebir uyumlu ve vida gerektirmeksizin düzgünce kapanabilen koruyucu ve kullanışlı bir kutu sağlar. Birden…

Pobrania
25
Polubienia
4
Ocena
0
P
Printablespgramsey

Antenna Winder for QRP

This is a re-imagining of lhdru's antenna winder, using a smaller transformer wound on a 2643625002 core and a BNC connector. I find that it works better as a 2:15 autotransformer. A 3:21 has too much reactance at 10 m, so the losses are…

Pobrania
22
Polubienia
0
Ocena
0
P
PrintablesDM5RC

EFHW Gehäuse QRP

Ein Gehäuse für eine EFHW-Antennen. Ringkern ist ein T140-43.

Pobrania
21
Polubienia
5
Ocena
0
P
Printablesdeoppresso

QRP Labs QMX tranceiver generic mount

This is a generic mount for a QRP Guys QMX transceiver. I have purposely not added any specific screw holes or other features for attaching the mount to something. If you desire, you can add features to the generic mount to mate up with…

Pobrania
19
Polubienia
4
Ocena
0
P
PrintablesRik M0RKM

QRP+ 15W Dummy Load Case

This is a case for the QRP+ Dummy load kit from Kanga products. I have owned a couple of these dummy loads and find them great, but I was always frustrated and scared by the lack of a suitable case for the dummy load. This is my answer,…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesZakoplex

QMX Speaker - Easy sound system for your QRP Labs QMX - VE7ZAX

VE7ZAX QMX Speaker Easy quick speaker project for the QMX with enough volume for indoor and non-noisy SOTA/POTA use. I wanted a simple, tidy, clutter-free way to listen to my QMX without headphones so I whipped up the ear-popping menace.…

Pobrania
17
Polubienia
3
Ocena
0
P
Printablespshuman

Stand for QRP Labs QCX transceiver

This is a stand/bumper case I designed for the QRP Labs QCX transceiver https://qrp-labs.com/qcx.html . I wanted to provide some protection for the radio, but keep it accessible as we worked on it. No specifics on print settings, but you…

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesKF0RIG

QRP EFHW Winder

Fits a FT50-43 Ferrite Toroid Core https://a.co/d/0fN6m64Y BNC Female Panel Mount Connector https://a.co/d/0g3ZafMm 100PF 10% High Voltage Ceramic Capacitor https://a.co/d/0e7L7mE5 26 Gauge Silicone Wire https://a.co/d/0fFKgEvb

Pobrania
16
Polubienia
2
Ocena
0
P

QRP Hand Held Microphone

I wanted something different for my QRP radio. I used a primer filler then matte paint after printing for the finish. Used PETG at 0.16, 40%infill, 3 walls. I included a blank microphone grid, to create the other one I used modifiers in…

Pobrania
16
Polubienia
0
Ocena
0
P
Printables._.

QRP Labs QMX+ CW Kneeboard with Tilted Cradle, Paddle Mount and Storage

Overview A one-piece kneeboard for the QRP Labs QMX+ transceiver. The radio sits on an incline toward you, so the display faces up at you instead of out at your belly. A 2 in steel fender washer in the front tab holds a magnetic-base…

Pobrania
12
Polubienia
6
Ocena
0
P
PrintablesJimSheldon

4 State QRP Club QRPometer Case

Protective outer case for the 4SQRP QRPometer. Keeps dust & debris out of the electronics as the sides are open in the original kit build. You should print @ .2mm/layer but any material and color can be used.. Very simple case and should…

Pobrania
12
Polubienia
1
Ocena
0
P
Printableswidgetwrangler

Case for 4SQRP Group's QRP dummy load

Created this model a year or two ago to mount David Cripe's NM0S QRP dummy load. Nothing fancy, no supports needed. Mount board to case using 2.5 mm self-tapping screws. Four adhesive feet can be attached to the bottom, if desired.

Pobrania
11
Polubienia
1
Ocena
0
P
Printablesatvfool

4SQRP EFHW/EFRW Box and Lid

A simple box for the 4SQRP EFHW/EFRW kit. To close the box, I used a couple drops of CA glue around the lid rim.

Pobrania
11
Polubienia
1
Ocena
0
P
PrintablesOK1FUN

Izolátor pro QRP drátové antény

Izolátor je navržen tak, aby byl co nejjednodušší a zároveň efektivní. Je vyroben z flex materiálu

Pobrania
10
Polubienia
4
Ocena
0
P
PrintablesJimSheldon

4 State QRP Club (4SQRP) "Challenge Coin"

4 STATE QRP GROUP "Challenge Coin" in 2 parts (Coin Base and LOGO) to make it easier to print the LOGO part lettering in different color filaments. Print the coin part first in Blue (should really be light blue) and then print the LOGO…

Pobrania
10
Polubienia
1
Ocena
0
P
PrintablesLU6APR

Case for Super RM RockMite QRP CW Transceiver

I need a case for rockmite, and doesnt find any stl. So I made, enjoy! Please feel free to modify! Please let me see your photos and like the project! Dont forget to like the Model! Thank you!!Dont forget to like the Model! Thank you!!

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesSimbo128

Enclosure for Testing QRP-Labs Low Pass Filters

An Enclosure for Testing QRP-Labs Low Pass Filters A small enclosure to house a small PCB. This help to hold different QRP-Labs low pass filters for testing with a NanoVNA. Some construction of the PCB is required and the materials are…

Pobrania
7
Polubienia
0
Ocena
0
P

QRP & Portable CW paddles

You need 2mm gold-plated banana plugs and two RVS 0.2 mm thick feelers for spark plugs. https://www.amazon.nl/dp/B07GNQZ6Y1?ref_=ppx_hzsearch_conn_dt_b_fed_asin_title_1&th=1…

Pobrania
7
Polubienia
0
Ocena
0
P
Printablescloud

QRP Labs LPF Board

Note: The 2x12mm screws are just a tad too long and will push thru the bottom of box and make little feet. If printing in resin, use shorter screws or they will push thru and fracture print. Build Info: 20x80mm Solder Breadboard…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesKai | DG4KAI

Side rails handles for UHSDR-QRP Amateur Radio Transceiver TRX

Alternative side protection rails and carrying handles for the UHSDR-QRP amateur radio transceiver. Designed as a direct replacement for the original side parts.

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesKai | DG4KAI

Rear folding stand for UHSDR-QRP Amateur Radio Transceiver TRX

Alternative rear folding stand for the UHSDR-QRP amateur radio transceiver. Designed as a direct

Pobrania
4
Polubienia
0
Ocena
0
P
PrintablesIK4PMB

QRP Balun box

This is a box to fit a balun for different diy ham radio antennas. I printed several of these for efhw, vertical antenna, long wire etc with Kobra X in PETG with standard settings. The hole if for a BNC/TNC panel socket, and I fix it with…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesKI6CR - Chris

Yet another Micro Balun case for QRP Ham Radio

Yet another balun case design. Many of the kits online were large in size, built for 100 watts. I run a 10w QRP radio for SOTA activations and have a zest for keeping things as small as possible. This was designed for a FT-82-43 Ferrite,…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesVlastimil

QRP Antenna Balun with WAGO terminal

See original description . This is a support-free remix of the original design by OK1HRA, published with his permission. I redesigned the parts so they can be printed without supports. The small locating pin is now a separate part and…

Pobrania
3
Polubienia
2
Ocena
0
P
PrintablesQRP Monkey

QRPGUYS MUTI-DC CW Tranceiver Case

Case for the QRPGUYS Muti-DC CW Tranceiver. https://qrpguys.com/qrpguys-multi-dc-10m-cw-transceiver Category: Hobby

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

QRP antenna accessories.

These are enclosures for a 49:1 UNUN for end fed half wave antennas, a 9:1 UNUN for random length end fed wires, and a common mode choke. They are sized for T82-43 toroids. Each enclosure also includes an optional gasket that can be…

P
Printables

QRP Guys EFHW Tuner Case

This is a snap shut case for the QRP Guys EFHW Tuner. The print of the top cover requires supports around the wire wingnut posts. The rest of it should do ok without supports. In fact, it is best to block supports for the divots where the…

P
Printables

QRP EFHW Winder

Fits a FT50-43 Ferrite Toroid Core https://a.co/d/0fN6m64Y BNC Female Panel Mount Connector https://a.co/d/0g3ZafMm 100PF 10% High Voltage Ceramic Capacitor https://a.co/d/0e7L7mE5 26 Gauge Silicone Wire https://a.co/d/0fFKgEvb

P
Printables

EFHW Gehäuse QRP

Ein Gehäuse für eine EFHW-Antennen. Ringkern ist ein T140-43.

P
Printables

QRP Hand Held Microphone

I wanted something different for my QRP radio. I used a primer filler then matte paint after printing for the finish. Used PETG at 0.16, 40%infill, 3 walls. I included a blank microphone grid, to create the other one I used modifiers in…

P
Printables

QRP Labs QMX+ enclosure with Powerpole connector

Original description: "Simplified/free version of my case for QRPLabs QMX+ Case has slightly biger tolerances but precise soldering of front and back components is still needed. You can always drill the holes a bit if you mised position…

P
Printables

Pixie QRP Transceiver Case

(TR) Bu model, telsiz ve radyo amatörlerinin aşina oldukları "Pixie" QRP cihazının 51 x 51 mm. ölçülerindeki devre kartı için birebir uyumlu ve vida gerektirmeksizin düzgünce kapanabilen koruyucu ve kullanışlı bir kutu sağlar. Birden…