Wyniki wyszukiwania: redirect

Sortowanie

98 modeli

P
PrintablesFreshPrints

Anycubic Filament Runout Sensor Redirection Mount for Kobra 2 Max / Kobra 2 Pro / Kobra 2 Plus/ Kobra 2 Neo / Kobra 2

This allows redirection of filament for easier travel to hot end when printing with a top mounted spool holder. Installation and Design explanation: Runout Senor Bracket: Tighten down the bolt to sensor bracket to the bottom base. Then…

Pobrania
2810
Polubienia
303
Ocena
4,89

Umlenkrolle/ redirect pulley

Einfache Umlenkrolle, für schwerere Lasten anstatt den Bolzen eine M12 Schraube verwenden Simple redirect pulley, for heavier loads use an M12 screw instead of the bolt.

Pobrania
1229
Polubienia
692
Ocena
5
P
PrintablesModcre8tor

Fiat 500 Navigation Radio Upgrade VENT Redirect

I upgraded to an android Navigation Radio system for my Fiat 500e. Since the vents have to be removed, the air would blow freely into the dash board, These vent redirect models make sure the air goes to the small vent included on the nav…

Pobrania
881
Polubienia
28
Ocena
4,75
P
PrintablesDanAndersen

angled fan shroud for 120mm 12cm fans to silence and redirect air flow

A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…

Pobrania
689
Polubienia
65
Ocena
4,5
P
PrintablesAlex Lab

Poop / Waste Chute – K2 PRO (CFS front-redirect), symmetric

Two versions : Redirects CFS purge (“poop”) to the front of the K2 PRO for easy clean-up. Tight mechanical slack by design; a light sandpaper pass may be needed. Default right-side install; mirror in slicer for left. Thermal & airflow…

Pobrania
673
Polubienia
52
Ocena
5
P
PrintablesW5AUG

Xiegu G90 Speaker Redirector

Please like and follow and post your makes This is a speaker redirector for the Xiegu G90. It was designed to be held in place by the G90-H1 bracket, but tape would also work. I made the redirection cone much shorter than the original…

Pobrania
408
Polubienia
32
Ocena
4
P
PrintablesJammerX19

Yaesu FT-891 speaker redirector

I run my Yaesu FT-891 with the front prop up and that aims the speaker up and away from me. I designed this dome to fit over the speaker and push the sound more in my direction. It uses several 6mm x 2mm magnets to secure it to the top of…

Pobrania
175
Polubienia
22
Ocena
5
P
PrintablesStuff Jon Makes

Flow Redirector for OASE CrystalSkim 350

The bottom cap included with the skimmer directs outflow downward, which can disturb the substrate in shallow tanks. Swapping the bottom cap for this print redirects the skimmer's outflow forward (and to some extent, diagonally upward),…

Pobrania
165
Polubienia
13
Ocena
5
P
PrintablesGeorge-Corrigan

AnyCubic Kobra Max Filament Redirector

This is for redirecting the filament feed from the front/left corner of the printer. This works great with my filament spool holder. Category: 3D Printer Parts

Pobrania
163
Polubienia
21
Ocena
0
P
PrintablesPyrosyncro

C5P (creator 5 pro) aux fan redirector.

After talking to a few people on reddit i can to realize that the aux fan is connected to the fresh air intake fan and can not be ran independently of that fan. the problem is if you want to filtrate your chamber, you have to run the aux…

Pobrania
154
Polubienia
25
Ocena
5
P
PrintablesJesseW3D

Air Conditioning Redirector

Printed in PETG on a Prusa Mini+ with 0.2mm layer height, no supports (I had them enabled everywhere but none were needed), and 20% infill. I attached it to my air conditioner with hot glue. If you wanted to direct air to the left you…

Pobrania
153
Polubienia
22
Ocena
4
P
Printableskirby

120mm case fan redirector

Description I have a Tripp-Lite wall mounted network rack with a spot for 120mm intake fans on the bottom, but these blow air straight up, which immediately hits the first thing mounted in the rack and then spills out the front and sides…

Pobrania
152
Polubienia
37
Ocena
0
P
PrintablesCdnMade

Kobra 2 Plus Cable redirector

You can use this with or without the Cable Spine linked below. I found that the cable was always interfering with the spool when using the stock mount and position. This will direct it out of the way. Use M5 T nuts and screws to mount, I…

Pobrania
150
Polubienia
27
Ocena
0

Doppelte Umlenkrolle / double redirect pulley

Doppelte Umlenkrolle, z.b. für einen Flaschenzug. Es wird nur eine M10 Schraube und eine Mutter benötigt Double pulley, e.g., for a block and tackle. Only an M10 screw and a nut are required

Pobrania
149
Polubienia
23
Ocena
4
P
PrintablesFIXITFEELIT

XiaoMi Air Purifier 4 Lite Fan redirector / Fan hood

Rotatable Fan redirector for Xiaomi Air Purifier 4 Lite with holes for the touch buttons. Fits 241 X 241 Xiaomi Air purfiers Only know that my 4 Lite fits I put my air purifier in front of my window casement airconditioner and it was just…

Pobrania
131
Polubienia
16
Ocena
0
P
Printablestdotfish

Xiegu G90 Clip-On Speaker Redirector

I liked the dome shape of DL9HAM's Xiegu G90 speaker redirector, and the elegance that it did not need supports to print, but I wanted something less permanent that could be put on/removed easily. Inspired by this clip-on stand, I used a…

Pobrania
108
Polubienia
10
Ocena
0
P
Printablesdarknrguk

Prusa Nozzle Fan Redirect

Snaps into the stock fan duct of the prusa's nozzle fan, imo better than the stock mk2 one. enjoy!

Pobrania
103
Polubienia
5
Ocena
0
P
Printableschaosmuse

Ender 3 Filament Guide Short + Redirect

Forgive the absolutely atrocious print job; this filament hates me. Presumably due to improper alignment of my filament holder, certain spools of filament (such as the one this is printed with) keep getting caught on later lines in the…

Pobrania
98
Polubienia
8
Ocena
0
P
Printablescdsmakestuff

Power Supply Fan Redirect - 60mm Fan - Creality Ender 3

If you find this thing useful, please consider sending a tip. :) https://paypal.me/cdsmakestuff A simple fan redirect. Originally designed for Ender 3's. Might work for other applications. Why? I am relocating the power supply underneath…

Pobrania
97
Polubienia
6
Ocena
5

Xiegu G90 Speaker Redirector

Introducing the Xiegu G90 Speaker Redirector, now travel-sized for your convenience! This pint-sized prodigy was designed to hug the G90-H1 bracket like a koala on a eucalyptus tree, but if you're out of brackets, slap some tape on there…

Pobrania
95
Polubienia
15
Ocena
0
P
Printablesjackharvest

Kirby Food Ninja Steam Redirector (Pressure Cooker Kitchen Cupboard Saver)

Ok, PHEW. This is a remix of a lot of things. My wife ran across a dragon head version of this (hi! Thank you! Awesome creation!) and we're... we're more Nintendo people, so after searching extensively for a model of Wario with his mouth…

Pobrania
89
Polubienia
24
Ocena
5
P
PrintablesKyle Splane

Xiegu G90 Speaker Redirect

Redirects the sound coming out of a G90 towards the operator.

Pobrania
88
Polubienia
3
Ocena
0
P
Printablessameerkulkarni

Dishwasher Airgap overflow redirector

When the dishwasher air-gap is blocked, the water squirts onto your kitchen. This print allows that water to be redirected into the kitchen sink instead of the counter top.

Pobrania
81
Polubienia
3
Ocena
0
P
PrintablesGatoo

Anycubic Kobra Max Filament Redirector for ptfe tube

Redirect your filament... without squeaky noises!

Pobrania
78
Polubienia
5
Ocena
0
P
PrintablesAngus L

Prusa Core One - Chamber fans air flow redirector (butt)

I have my printer enclosed and my enclosure has a top air exhaust so I want to redirect the hot air flow from the chamber fans intentionally upwards, away from the electronics and to a place where it will imediatelly be exhausted. it…

Pobrania
77
Polubienia
26
Ocena
5
P
PrintablesSpam N' Rice

Creator 5 Pro Chamber Intake / Recirc /Filter Flow Redirect

The Creator 5 Pro Chamber Intake Outlet and Chamber Recirc/Filter Outlet blow across the build plate. This print redirects the flow downwards. Slice/print in the orientation shown with normal supports and brim. You may need to file/sand…

Pobrania
70
Polubienia
17
Ocena
0
P
Printableshojokono

Air Vent redirector Just add magnets!

I made this beacuse the vent in my room was constantly blowing on my face at night and it helped me alot! be sure to download and like this print, i love making helpful stuff like this i added 3 neodymium magnets to it to get it to stay…

Pobrania
69
Polubienia
9
Ocena
0
P
PrintablesWaynger

Belka DX Stand / Sound Redirector

I printed in PLA with support .3 layer there are 3 holes to screw the two parts together or use super glue if you prefer

Pobrania
65
Polubienia
5
Ocena
0
P
Printablesgaspard

Gutter Redirector - 116 deg

This redirects your gutter by 116 degrees . What is shown in the picture is not my intended use case for it; I intended for this to be in another area, but there is not enough space for it. So, I put it up here in case anyone else wants…

Pobrania
64
Polubienia
21
Ocena
5
P
PrintablesSurfalex2000

Redirecting air vents for Ikea

For better air circulation i needed to redirect the Air

Pobrania
63
Polubienia
5
Ocena
0
P
PrintablesAyoungchicken

cable redirector 4mm- 5mm-6mm-7mm

cable clip 4mm- 5mm-6mm-7mm. for ethernet, usb hdmi and many more cables!

Pobrania
62
Polubienia
34
Ocena
5
P
PrintablesNigel Johnson

Faucet/tap flow redirector

Sick of trying to wash your hands against the back of the sink? Sick of all the water splashing behind the basin? I gotcha!. Print instructions This is a specific design for my kitchen tap, so may not help you unless you have the same…

Pobrania
59
Polubienia
16
Ocena
0
P
PrintablesTimmy Turner

Steam Deck Noise Redirecting Fan Scoop

THIS IS A WORK IN PROGRESS In theory this fan scoop should redirect some of the fan noise away from the user. I say in theory because I don't have my Steam Deck. It should dampen the sound because I used the same basic idea on my Ender…

Pobrania
54
Polubienia
7
Ocena
0
P
PrintablesGreg Nutt

Flow redirector for Bissell Little Green Machine

I don't know the official name for this piece. It redirects the flow from the supply hose to the sprayer nozzle. My original part had the input nozzle break off. I figure it may be a common problem. This may be a a tricky part to print…

Pobrania
52
Polubienia
5
Ocena
0
P
Printablesgoldsquadron

Dewalt Hand Vacuum Exhaust Redirector

I found that by default the vacuums exhaust blows out and down, usually disturbing what you're trying to vacuum up. These redirect the air flow upwards, or if you like downwards. Printed .3mm PETG and stuck them on with epoxy. Works as…

Pobrania
50
Polubienia
12
Ocena
5
P
PrintablesMeister Edel

140 mm Case Fan Air Redirector

Heyho. I just built a new PC and there was a spot for a 140 mm at the bottom of the Dark Base Pro 901 Case by BeQuiet. I thought about using this to get some air directly to the GPU. So I designed and printed this Air redirector :D I…

Pobrania
48
Polubienia
26
Ocena
0
P
PrintablesTWC

Basic HVAC vent redirect (297mm X 195mm)

I couldn't find an existing HVAC vent redirect which was sized for my vent and could also fit on my printer. This model is sized to fit my vent and fit diagonally on a 256mm bed. Printed with no brim and hybrid tree supports in a tough…

Pobrania
48
Polubienia
12
Ocena
0
P
PrintablesMark
Pobrania
46
Polubienia
4
Ocena
0
P
Printablesshortyjacobs

Jayco 242BHS Bathroom AC Duct Redirect to Lower Bunk

The Jayco 242BHS / 242BHSW doesn't have an AC vent in the lower bunk. It does have an AC vent in the ceiling of the bathroom, but the bathroom is so small that it ends up damn near antarctic in there. So I made a plenum. You pop off the…

Pobrania
46
Polubienia
8
Ocena
0
P
PrintablesAmmar Faridi

Air Redirector to Cell phone

This Air ventilator - redirector is designed for BYD Song Ac vent to re direct some of the cold air to keep the mobile phone from heating up and closing specially in hot climate. Better printed sideways with organic supports.. ABS or Petg.

Pobrania
45
Polubienia
4
Ocena
0
P
Printablesconflag

Ecotech Mp40 aquarium pump Anemone Guard - with redirection

Filled some of the output sections. If you plan to have your Ecotech MP40 near the bottom of the aquarium and you're worried about blowing away the sand, maybe this merged guard+redirector project can help. Haven't yet tested how useful…

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesKuzuri Ao

Subaru Monkey Bone Racing Vent Pod Redirector

If you installed the MBR Vent Pod to allow you to replace your center two vents with gauges, then you know that you pretty much lose any and all airflow that used to come out of those vents. The problem is that the airflow does not get…

Pobrania
39
Polubienia
3
Ocena
0
P
Printablesb1tshifter

Vent Redirect - 10" x 6"

My wife wanted the vent under her desk redirected away from her feet. This solved the problem! This cover has places to glue magnets to hold the cover onto the vent. It is quite heavy. I am accustomed to designs for outdoor, heavy-duty…

Pobrania
35
Polubienia
5
Ocena
0
P
PrintablesJiltedGeek

JeSc Fan Deflector Redirector 40mm v1.0

I made this because the fan of my part-cooling made a lot of backdraft that cooled the part on the bed when it moved across the bed. Large prints would release from the bed because of this draft. This 40mm fan deflector redirects the…

Pobrania
35
Polubienia
4
Ocena
0
P
PrintablesBadPapaBear

Chitu H2 redirector for Elegoo Centauri Carbon

Sits on top of the Chitu H2 chamber heater and redirects the air flow to the top of the printer where it really makes a difference. I made this to fit in an Elegoo Centauri Carbon when the H2 heater is placed to the left side of the print…

Pobrania
34
Polubienia
11
Ocena
5
P

Alienware m15 IETS laptop cooler exhaust redirector

I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.

Pobrania
31
Polubienia
8
Ocena
0
P
Printablesconflag

Ecotech MP40 Honeycomb Guard with redirector

Filled some of the hexagons. If you plan to have your Ecotech MP40 near the bottom of the aquarium and you're worried about blowing away the sand, maybe this merged guard+redirector project can help. For printing tips please refer to the…

Pobrania
29
Polubienia
2
Ocena
0
P
PrintablesAron van Belle

FryFlow Redirect | Philiphs XXL airfryer

This is a simple sulution to that problem that everyone has with their airfryer and downdraft vent, when you make fries or something else your intire kitchen will smell like it for the rest of the day. The FryFlow Redirect redirects the…

Pobrania
29
Polubienia
2
Ocena
0
P
Printablesflachat

80mm Fan Airflow Redirector for Laser Engraver

This 3D printable airflow redirector is designed to mount on a standard 80mm fan and direct the airflow underneath the laser module — ideal for blowing through the honeycomb bed of your laser cutter. It improves smoke extraction, helps…

Pobrania
28
Polubienia
5
Ocena
0
P
PrintablesAustin H.

Magnetic Air Vent Redirection Device

I have an air vent that is pointing directly at my 3D printer. The cold air shock was causing some warping on larger prints. This allows me to keep the air blowing in the room, just pushing it to the other side which appears to be…

Pobrania
28
Polubienia
7
Ocena
0
P
PrintablesPaul Witt

Air vent redirect

Attaches to an air vent to prevent the air from blowing in an undesired direction. Uses magnets 5mm diameter, 3mm tall. I used these magnets: https://www.amazon.com/gp/product/B08DNH63JV You can also use the included CAD file to change it…

Pobrania
27
Polubienia
2
Ocena
0
P
PrintablesZincLeadAlloy

Garden Hose Redirector for Fish Tanks

A simple tool to redirect the garden hose water flow opposite to normal, to fill fish tanks without disturbing the surfaces. It saves me the time and effort of using a bowl on my aquarium when filling it up. Ideal for planted tanks

Pobrania
27
Polubienia
5
Ocena
0
P
PrintablesVlad_kzmnk

Redirected and reinforced base, printable pipes

Redirected and reinforced base for bigger adhesion + printable pipes.

Pobrania
25
Polubienia
0
Ocena
5
P
PrintablesZeke

Vizio 65" Speaker Amplifier / Redirector bar P65-E1

This is imported from Thingiverse The (2018 model) Vizio P65-E1 TV I have is designed to blast sound off a wall and reproject back to you. Well, this doesn't work if you turn your TV away from a wall, and can be quite annoying if you are…

Pobrania
25
Polubienia
5
Ocena
0
P
PrintablesGarp Cosplay

Airflow Redirect Adapter for Air Brush Booth

Airflow Redirect Adapter for Master Airbrush XL Dual Fan Booth Redirects airflow to the side—no back venting! This custom 3D-printed adapter fits the Master Airbrush Hobby Spray Booth. The 3-part system (fan mount, extension, and hose…

Pobrania
24
Polubienia
8
Ocena
0
P
Printablesfreemanowe

Moist air redirector for Midea mini dishwasher

To redirect the hot humid air coming from the dishwasher during the drying phase from the bottom of the furniture. The prototype had too small lips so I had to tape it down, but the uploaded version already has the lips 2mm longer for…

Pobrania
24
Polubienia
4
Ocena
0
P
PrintablesDr_Horrible

Sovol SH02 PTFE Tube Redirect

I didn't like how tight the bend radius is if you try to run filament from a mostly full spool out the stock PTFE tube ports on the Sovol SH02. Print this solid or nearly solid in 90A-95A TPU. Remove the OEM threaded passthrough.…

Pobrania
22
Polubienia
3
Ocena
0
P
PrintablesDyne

Valve Index Cable Redirector

This ridiculous looking and over-engineered Printable exists because the Valve Index cable, as shipped, exits more or less toward the right side of the headset. For my setup, it would be much better if it exited toward the left , so I…

Pobrania
21
Polubienia
2
Ocena
0
P
PrintablesPaige343

Bissell Pet Hair Eraser Fan Cover/Fin Air Redirecter

Redirects air from the Bissell vacuum backwards, so you don't blow away the stuff your trying to vacuum! Easily clips in and out of the fan grills. Print in the direction as seen in photos.

Pobrania
21
Polubienia
3
Ocena
5
P
PrintablesAWT Works

Ender-3 V3 SE Toolhead Wire Redirect

This is a low profile wire redirect for the Ender-3 V3 SE toolhead. It forces the cable to exit rearwards with a smooth bend radius, reducing wear and unwanted rubbing on the top gantry. Designed as a replacement for the stock wire clamp.…

Pobrania
20
Polubienia
3
Ocena
0
P
Printablesjurassic73

Floor AC Unit Cold Air Redirect

There are two models - one is angled upwards and one tries to send air horizontally. This is an air redirector for floor AC units. My AC unit was blowing out into my room fine but I wanted some direct cooling on me so I designed this…

Pobrania
20
Polubienia
1
Ocena
0
P
PrintablesAH Guitars

Cable redirect for G29, G27, G25

This part allows the G29's pedal and power cable to be cable managed under your desk without straining the cables or permanently modifying your wheel. The cable block screws onto a custom mounting bracket which is screwed into preexisting…

Pobrania
19
Polubienia
6
Ocena
0
P
PrintablesKeen_Edge

Sunlu S2 Feed Redirect Bearing Roller Guide

Preface/Supplies This model, just like the one from _bdjester, utilizes a 608 skateboard bearing that must be (somewhat forcefully) pressed into the spool. I used double-sided mounting tape just like they did; however, I got away with…

Pobrania
19
Polubienia
2
Ocena
0
P
PrintablesLando

Staubsaugerabluftrohr / vacuum cleaner air redirect

My cheap handheld vacuum works good, but the exhaust air was blowing in my face, so i've decided to create a little pipe that redirects the air 90° to the side, so that i can see what i'm trying to vacuum, but not get the air directly in…

Pobrania
18
Polubienia
2
Ocena
0
P
Printablesshrmn

Ikea Fornuftig Back-blowing Redirect

I snagged a Fornuftig at a local Ikea sale event for the same price as an Uppatvind with the intention of using it as positive air intake for my networking rack (reduce dust buildup from within the rack). The vent of the Fornuftig,…

Pobrania
17
Polubienia
3
Ocena
0
P
Printableschking

Air Duct Redirector

I have a ceiling duct that drops cold air right above where I sit on the couch. This design magnetically attaches to the vent and redicrects the air. If you use Fusion 360 then you can adjust the parameters of this design to fit your…

Pobrania
16
Polubienia
5
Ocena
0
P
PrintablesJanisMi

3d printed rc boat WPL-07 water redirecting spoiler

This is a (possibly) upgrade item for thing 3807800 from thingiverse, a printable RC boat. If your engine/shaft/propeller setup is different you might not have the same use of it. In my case though, when going backwards, the propeller…

Pobrania
16
Polubienia
8
Ocena
0
P
Printablesbriand42956

Central Air Vent Redirector

With the warmer season approaching for my location, we needed something to redirect the cool air from our central air conditioning up into the bed room and keep it from sliding under our bed straight to the return duct (cool air sinks).…

Pobrania
16
Polubienia
3
Ocena
0
P
Printablesselyfriday

Fountain Flow Redirect

Nozzle attachment for a floating solar powered water fountain. First time making something in tinkercad, printing and fitting all within an hour! Small nozzle to redirect flow in a certain direction. I wanted a more horizontal flow…

Pobrania
16
Polubienia
1
Ocena
0
P
PrintablesMaslovyRohlik

Ikea Sensible Air Filter Redirection

I printed these to screw them onto the outlet of the air filter. They are at a relatively exact 90° to the back of the fan. I believe they were attached by drilling through and screwing them onto the grille. The corresponding counterpart…

Pobrania
15
Polubienia
2
Ocena
0
P
PrintablesCordovaLabs

Aero Kinetic Redirector (2017 Science Olympiad)

This is a very basic air duct for use in the Hovercraft event for the 2017 division B/C Science Olympiad. It should be fully rules complaint but check dimensions before using this design. The Aero Kinetic Redirector or AKR for short (my…

Pobrania
15
Polubienia
0
Ocena
0
P
Printablesitsjusttag

Redirector for Centauri Carbon Heater Mod

I printed https://www.printables.com/model/1320401-centauri-carbon-heated-chamber-mod to add active heating to my CC chamber. I found the hot air goes pretty straight out of the heater making it take longer for the heat to get to where…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesNick

Pump Nozzle Redirect

My wife found the type of pump nozzle to be very messy, not only the angle but the velocity at with it came out. This redirects the angle straight down and seems to slow the output a little.

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesChaseCares

Air redirect Toyota RAV4

Designed for the 2016-2018 Toyota RAV4, it redirects the air vent on the dash directly onto the EON. Initial testing was in midday and the outside ambient temperature was 33C and the EON hovered around 28C degrees and the fan never ran, I…

Pobrania
13
Polubienia
3
Ocena
0
P
PrintablesStonemull

Ipad 3 Magnetic Speaker redirector

I believe it will also work fine on an Ipad 2 but not tested. Held on with 4 small magnets, self adjusting, takes a reasonable knock or simply slides off. Makes a HUGE difference in audio. Prints flat in 2 parts with no support needed,…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesLazyEpic

Fan air redirect shield

After having issues with air blowing out sideways directly on my knee I designed this easy redirect. The idea is simple, stick it to the chassis (use double sided tape if needed) and any unwanted side flow should be redirected.

Pobrania
12
Polubienia
1
Ocena
0
P
Printablesmaps

Ender 3 Board lid to redirect wires

Main positive points from this design: no interference with bed movement full free movement in X and Z movement easier maintenance in the changing sensor good for my Direct Drive Extruder (and also to others) Extras : plain version or……

Pobrania
12
Polubienia
1
Ocena
0
P
Printables3dguy

Humidifier Cannon - redirect vent

Created a “cannon” vent in order to help redirect flow from humidifier for the 6L Humidifier for Bedroom Large Room Home, mine is sold under the name Coolfiqu. IMPORTANT: Check that your slicer part position and height. My slicer is Bambu…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesCodeFox

PTFE tube redirector for BBL P1S and P1P

This model redirects the PTFE tube from the extruder to stop it rubbing on the sharp edges of the enclosure and stop catching on the screws. Why? I was having a lot of issues with the PTFE tube rubbing on the top glass and “shedding”…

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesJabrano

Side Vent Redirector Shroud for 10.5cm vent

I only anticipate using this for the A/C in the summer, you may want to print this in PETG or something more heat-resistant if you have hot vents in the winter or are placing this in view of a hot window. PETG may require the Silent //…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesMark Hooper

Register Booster Redirector

These files make up the pieces to put together my register booster re-director

Pobrania
9
Polubienia
0
Ocena
0
P
PrintablesDeVsFaN1830

Clean Air Redirector - Jure Filter

Did a slight resize of the clean air re-direct duct by zuspiel in to match up the mounting holes to those on filter sandwich made by JKSniper. http://www.thingiverse.com/thing:2105113 Print with the same settings zuspiel reccomended. To…

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesRichHomieTee

G4 HP Thunder Bolt Cable Redirector

This is a riser? I don't know what it is but I do know what it does since I designed it. It is a HP G4 dock mod that will redirect your thunder bolt cable so that it comes out the back instead of the front. I really didn't like how the…

Pobrania
7
Polubienia
3
Ocena
0
P
PrintablesCooper Larson

Under-Bed HVAC Airflow Redirector

Under-Bed HVAC Airflow Redirector A simple and effective airflow redirection tool designed for HVAC or central air systems. This part attaches to standard rectangular floor vents, guiding cool or warm air from under a bed or obstructed…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesJamie

DW660 blower redirection

Little chute to redirect output air from DW660 to blow onto the cutting area. Two little pegs are intended to fit within the output ports to hold it in place. Two holes near the top of the part are intended for #6 sheet metal screws to…

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesINVENTOR 55

Škoda Felicia Dashboard Infotainment Mount & Air Duct Redirection (7" Display)

Custom 3D printable holder designed to replace the original central ventilation grille in the dashboard of a Škoda Felicia . It allows you to integrate a 7-inch touchscreen (Raspberry Pi display) into the center console while maintaining…

Pobrania
6
Polubienia
1
Ocena
0
P
PrintablesN N

Derailleur Cable Redirector

This is a simple derailleur cable redirector. Some derailleurs (most notably, the Shimano GRX series) will redirect the end of the cable directly into the wheel requiring you to cut the end of the cable, even if by a measly few…

Pobrania
4
Polubienia
2
Ocena
0

The Great Snack Redirector 3000 – Funnel for M&M's Mega Tubes & Walmart Big-Screw Jars

Behold: The Great Snack Redirector 3000. A funnel engineered for one noble purpose — getting snacks INTO the container instead of all over your counter, your shoes, and that one floorboard the dog is already eyeing. It spins perfectly…

Pobrania
4
Polubienia
2
Ocena
0
P
PrintablesOnyxSkyDV

Air flow redirector for Shark NeverChange air purifier

The air purifier propels air straight up, but I needed to redirect the flow horizontally, so I made this 3 part print to redirect the air. Printed at .2 layer height with a very low infil, slip fit on the top of the air purifier. Print…

Pobrania
3
Polubienia
0
Ocena
0
P
PrintablesVitali

8 inch Vent Partial Redirector (AC / Heat Pump / Wall or Ceiling Duct)

This is a simple model made to clip on to the round cover of the wall or ceiling duct vent. In my case the diameter of that cover was 6.75", but the model should be fairly flexible to accommodate slight variations in sizes. I have two…

Pobrania
2
Polubienia
0
Ocena
0
P
Printablesmoonlitcress

8bitdo Pro 3 - Extra Shoulder to Back Button Redirection

This is a clip on mod for the 8bitdo Pro 3 - taking inspiration from some the levered Xbox controller accessibility mods to effectively redirect the extra buttons on the shoulders to be inline back buttons. You assemble it with the left…

Pobrania
2
Polubienia
2
Ocena
0
P
Printables

Alienware m15 IETS laptop cooler exhaust redirector

I created this fin to redirect the hot air coming out of the back of the laptop and prevent it from being recirculated back into the laptop. The cable holder is optional. It might work with other laptops as well.

P
Printables

Xiegu G90 Clip-On Speaker Redirector

I liked the dome shape of DL9HAM's Xiegu G90 speaker redirector, and the elegance that it did not need supports to print, but I wanted something less permanent that could be put on/removed easily. Inspired by this clip-on stand, I used a…

P
Printables

Sovol SH02 PTFE Tube Redirect

I didn't like how tight the bend radius is if you try to run filament from a mostly full spool out the stock PTFE tube ports on the Sovol SH02. Print this solid or nearly solid in 90A-95A TPU. Remove the OEM threaded passthrough.…

P
Printables

cable redirector 4mm- 5mm-6mm-7mm

cable clip 4mm- 5mm-6mm-7mm. for ethernet, usb hdmi and many more cables!

P
Printables

PTFE tube redirector for BBL P1S and P1P

This model redirects the PTFE tube from the extruder to stop it rubbing on the sharp edges of the enclosure and stop catching on the screws. Why? I was having a lot of issues with the PTFE tube rubbing on the top glass and “shedding”…

P
Printables

Kobra 2 Plus Cable redirector

You can use this with or without the Cable Spine linked below. I found that the cable was always interfering with the spool when using the stock mount and position. This will direct it out of the way. Use M5 T nuts and screws to mount, I…

P
Printables

XiaoMi Air Purifier 4 Lite Fan redirector / Fan hood

Rotatable Fan redirector for Xiaomi Air Purifier 4 Lite with holes for the touch buttons. Fits 241 X 241 Xiaomi Air purfiers Only know that my 4 Lite fits I put my air purifier in front of my window casement airconditioner and it was just…