112 modeli
I needed an additional area for our chicks to feed so I drew up this simple trough. Edges are rounded which may be safer for the birds, but a coupe of them like to walk around on or in it. No issues with this as of writing this. I place…
Wydruk około 11,93 €–14,58 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I wanted to use my printer the day I set it up, and the printer did NOT ship with a filament runout sensor mount. Found one on printables, but it needed an added pneumatic adapter which I didn't have - so I remodeled it to just hold the…
Wydruk około 0,51 €–0,62 € nettoWstępna wycena dla PETGMateriał u źródła: PET
If you are right-side back mounting a filament holder you need a way to feed filament into the printer. A reverse bowden setup is typical. I downloaded the one that I remixed, and it did not grip the PTFE tube but left it loosely hanging.…
Wydruk około 0,40 €–0,49 € nettoWstępna wycena dla PETGMateriał u źródła: PET
A super simple print for putting a tiny wall around the Z belt openings on a Voron 2.4 or Troodon 2 Pro style printer. Print 4 of them. They block bits and bobs from falling into the pulley hole. You can glue them, or you can leave them…
Wydruk około 0,29 €–0,36 € nettoWstępna wycena dla PETGMateriał u źródła: PET
The Big Tree Tech 5-inch displays that come with Troodon 2.0 Pro get wonked. They say it's because of strong magnetic fields. Either way, when they get wonked, you can't buy a replacement. What you can buy is a BTT 5-inch V1.2 display.…
Wydruk około 1,68 €–2,05 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Simple spool holder adapter for old Creality spool holder (the one with the twist bayonet) to mount on a Troodon 2.0 Pro or a Voron 20mm vertical frame extrusion. Mounts with standard M5 hex head to the T-Nut that is captive inside of the…
Wydruk około 0,71 €–0,87 € nettoWstępna wycena dla PETGMateriał u źródła: PET
design by @idontknow mang | https://www.thingiverse.com/thing:4688278 no need for support just believe in lord shrek
This bracket attaches the filament sensor on the Troodon 2.0 to the frame. I didn't like having it free-floating. It also provides a secure attachment point for the reverse bowden tube. Added a version for M10 pneumatic fittings per…
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Shroodle, Tabletop DnD miniature 20 mm medium base which can be used for DnD and other Tabletops.
Single Fan Extension for Nevermore, based on The Filter Single Fan
I have lost the legs for my Producer's Pride brooder plate for my chickens. My first iteration of this model didn't have tapers on the prongs that are inserted into the brooder plate. This make them nearly impossible to use. This version…
This is an insert for the game "Bread & Beer" or in Dutch "Brood & Bier". The version I have is that of the game publisher "999 GAMES". I do not know if there are differences in other language versions ("Deep Print Games"). I did not find…
1:18 scale model of the troodontid from the “Weird Birds” web series. This was made in collaboration with Archesuchus. The model measures 10" long from snout to tip of tail. The model features detailed scale and feather texturing along…
Add a bunny with a bit of attitude to your space. Another sculpture scan. Prints without supports. Enjoy! As always, sharing your prints/makes is always appreciated.
These use the pin from the original hinges. Press it out of the old hinge and then use a soldering iron to sink the pin in the frame side of the hinge. Mounts with the original screws and spacers.
I took the design from @RabidBadger_397944 and modified, so that I can add a PTFE coupler to the Front of the Sensor. That way I could mount a side mount spool holder and have it guided into the sensor from a 90 deg angle. I also opened…
the troodon has a very large brain because it is the smartest dinosaur
Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave A simple mount to add Neopixel RGB LEDs to the top of your Troodon 350mm 3D Printer. Just slide the LED strip into the slots in the holder. Mounts to the top…
Modified housing to include mounting holes for Troodon 2.0 front panel. Attach mount to printer first. The top screw holes for the screen are accessible through the hexagonal holes in the skirt.
These make accessing the electronics of the Troodon 2.0 much easier. Required hardware: 4x M4x10mm socket head cap screw 6x M4x16mm socket head cap screw 10x M4 spring-loaded t-nuts for 20x20 extrusion Installation steps: Remove the trim…
PG7 adapter motor mount side for the Troodon v2 3D Printer. The version in the pictures was printed in PETG on Bambulab X1 Carbon using the “0.20mm Standard” preset on a “Textured PEI".
The stock hinges on the Troodon 2.0 only allow the doors to swing 180°. These hinges allow you to fold the doors back against the sides of the printer and out of the way. They're also designed to be easily removable without tools. There…
Troodon 2.0 2020 extrusion top rails for mounting anything to the top of the enclosure. Such as enraged rabbit or a spool holder etc. You'll need 4x400mm 2020 extrusions, and tap the ends for M6. Add some t-nuts and you are good to go.…
Bucket to catch purged filament from nozzle cleaning brush. You'll need 2 m3 heat inserts and 2 m3x20 screws.
Just print them out and slap them into place. No additional hardware needed. UPADATE: Increased the hole spacing to give the belts more wiggle room. Added a cover with cable routing in case you're crazy like me and route cables through…
Original model was very complete with multiple mount options all in 1 step file. I've removed some of the options to streamline down to 3 needed components - the mount and a 2 part screen frame. The USB-C port hole has been moved to…
The stock front idlers for the Troodon 2.0 are functional, but lacking in performance, usability, and appearance in my opinion. So, I decided to remix the famous Beefy Idlers for Voron 2.4 printers that was created by Clee. I used Tetsu's…
Deep beneath the towers and moonlit halls of the Moonveil lies a sanctuary even the Dark Elves approach with reverence. There waits Velthara, Queen of the Moonveil Brood . Once among the most powerful high priestesses of the Moonveil,…
MtG's Classic villains are perfect for Halloween. Happy Spooky Season If you want to help me keep making free models or want to tell me what I should make next please check out my Patreon Category: Games
Modified exhaust filter door and inner chamber exhaust support for CANBUS. You will need x2 M3x10mm screws.
Had to change to a StealthBurner and the Voron belt clamps will not fit the Troodon 2 printer so made this simple model by copying this one by pungo120 https://www.printables.com/model/479348-voron-ab-belt-installation-helper-clamp You…
Update: Fixed some dimensions and added chamfers on the lower magnet bar for style. V1 is still in the files if you like it better without those changes. These are magnet holders to replace the stock front door magnets on the Troodon 2.0…
Everyone knows that accessory mods add around 1 mm/s/s of top acceleration each. (Prove me wrong) So, I decided to make these motor mount covers for the Troodon 2.0, for speed purposes. These covers require no additional hardware and…
STL of Troodon 2.0 Pro OEM Screen Frame and Mount
A filament guide to use with a side mounted spool holder on the troodon 2.0 PRO.
Mounts to the front of the printer where the original magnetic bracket goes. The screen that came with my printer suddenly died one day (likely due to the strong magnets placed directly behind it) and Formbot sent me the updated model as…
I switched to a toolboard on my troodon 2.0, hence I needed an adapter plate for my motor mount because of the new cable. This adapter board screws in on top of the motor mount on the top right. You need M3x32 screws instead of the old…
Quickly edited the mount to fit the Troodon 2.0. Chopped off the top part the goes into the extrusion and added a bar in the middle to handle the 2xM3 screws that go into the frame. Use screen housing from Voron 2.4 mount. It's a bit…
Here is a hinge for the Troodon 2.0 which can be opened 270 degrees. The same screws and slot nuts are used as for the factory hinges Category: 3D Printer Parts
Tired of the stock back-mounted spool holder? Here is my ad-hoc solution. Both the spool holder and PTFE guide are mounted using the existing side/back panel screws. No additional hardware needed. The spool holder has a recess that allows…
Requires x3 M3x40 screws, x1 M3x6, x1 M3 heat set insert. The best blades I have found, they have lasted thousands of cuts so far:…
Troodon 2.0 Pro Z-Belt Protection snap in design Update V2 is Online If you like my model, I would be happy about a Like
As requested by a Reddit user. A prototype of a divider for Pet Brooder. Work in progress!
Since I upgraded the Firmware of my Troodon to Klipper the original display would not work correctly anymore. Since I had a 7" raspberry pi touch screen lying around a decided to switch to KlipperScreen and build this adapter. The adapter…
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
NOT MINE (obviously) There wasn't enough troodontids on this sight. The original upload of this model on sketchfab was lower poly so I simply made it higher poly and printable Troodon by Frontier Developments
Vhorlath Realms – Season II: Shadowed Empires Dark Elf Vorthak Broodfang 3D printable STL miniature for dark fantasy tabletop RPGs, miniature painting, collecting, display, and wargaming armies . The Vorthak Broodfang is a monstrous…
40mm Canopy that allows for more Z height clearance. x12 45mm M3 screws are required. I also foam taped the top, bottom, and seams of each piece. Printed in ASA. Print 4 of any of the STL's to make the entire canopy.
Belt covers for the Troodon 2.0 to keep dirt / dust and other debris from falling in to the wide hole that is left near the belts. It can cause problems if a blob of filament falls in and gets stuck in the belt path, so this model solves…
You’ll know Z’thra by the humming. It isn’t a song; it’s the sound of a thousand hungry mouths vibrating in unison. She’s more parasite than person now, a withered husk held upright by the massive "Queen Grub" fused to her spine. When she…
Myrddin is weird. Giant Cybernetically enhanced flying eels live there in addition to the schools of regularly sized {Sky-Eels]( https://scryfall.com/card/som/44/sky-eel-school ). At least by the second time WoTC decided to set a block…
Screen Mount for the Troodon 2.0 for a Biqu/BigTreeTech HDMI 5 Touchscreen. 20deg Tilt
Zugentlastung für den Troodon 2.0 Gedruckt in ASA von Filamentum
A Gibberling Brood Mother. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
OEM Grill that you can print in any color you want, you will have to print 2 of each side sections.
This is a Pyramid Poop Guard for Brooder Heatplate. Idea is to reduce or eliminate your chicks ability to poop on top of the plate. Heatplate purchased from Amazon and does not come with any poop protection…
A remix of the right motor mount cover to make clearence for the cable.
Rails that the panel slides into, so you don't have to take off all the screws. Side Panels: Use M3x6 to attach the rails and M3x12 for the top center screw that retains the panel. Botton Panel: Reuses all but one of the stock panel…
Read: summary You will need 4x 6x3 magnets and some glue for this mod. Print 2 of each vent in your chosen infill pattern with no top or bottom layers, then glue to the main body. Attaches with the two screws on the front of the Troodon's…
This is a replacement PanelDue mount for the Formbot/Vivedino Troodon with a secondary mount for a RaspberryPi (i.e. for Klipper or Octoprint etc.) I added the FreeCAD file in case you want to modify it. My Troodon is the latest model as…
Currently a beta
In order to reach the full 330mm height capacity claimed by Troodon the 2.0 Pro needs some spacer blocks to rise the lid so that the bowden tube doesn't get bent up against it. I've designed these blocks to do the job while using not too…
I have not used this or tested it myself - this is just an idea that I came up with. Use at your own discretion for your own needs! The connectors on the breakout board occupy most of the available space in the cutout located underneath…
Rabid Badger did the original design work on this and I just hacked on a M10 coupling because that is the type of connector I had available. This bracket attaches the filament sensor on the Troodon 2.0 to the frame. I didn't like having…
I didn't like the fan placement or the spool holder on the Troodon 2 pro. My printer takes up the entire width of my desk and wouldn't have ease of access to change spools. So i changed the location of the fan a made a filament runout…
Print with 10 walls and 90-95% infill for maximum strength. Highly recommend to print these slow and hot . ASA is fine, but I'd recommend ASA-GF or CF if you can. These are printed lowers for the XY joints that replace the stock metal…
This is a simple adapter to use the HULA feet with the Troodon 2.0 Pro https://github.com/thrutheframe/HULA_Voron/
you should add supports and watch rhymes with grug
A brood insert for 20mm test tubes! Good for some ants that don't care for climbing on glass, the grid pattern on the back of the insert presses against the cotton on your water chamber. It's similar to the inserts sold by some companies…
i designed a own screen holder for a waveshare like 5inch touchscreen. in my case this was an dfrobot screen. it is a drop in replacement of the original duet like tft holder i printed it like it lays in the model with Brim and Supports.…
Boitier réalisé en PLA pour recevoir les capteurs broodminder. Le bouton peut être actionné et la led est visible par transparence.
hide the cables at the back of my troodon 2 pro printer, with feedthrough and holder for a thermistor If you like my model, I would be happy about a Like
Print with: 0 tops layers 0 bottoms layers Whatever infill and percentage you want-that is what creates the design. Use 2 M3 heat set inserts for the screen magnets Place face down with supports only for the screw holes The large middle…
Ridid Z mounts for the Troodon 2.0. Decreases Z bleed in resonances.
The 3D printed leg is the one in the front right of the first picture. I tried to model it exactly the same as the original. Hope this helps someone! I printed it in PETG on the Kobra S1. I believe this is the one that my brother has…
For a troodon V1, Mounts on the mgn9 carriage spot, on the bottom. using a Cartographer3D low profile sensor. Im have a mosquito hotend so you may need to adjust. with nozzle touching the bed, it needs to be 3mm way from the bed . v1.1…
Troodon 2.0 Rocker Feet for use with the HULA Feet Adapter https://www.printables.com/model/1139697-hula-anti-vibration-feet-fo
My chicken babies are just about feathered out and starting to learn to escape their brooder before they're ready to move to the coop, so I made this quick and dirty little clip to mount to the walls of their brooder box and keep them in.…
Hello all, I made modification, a remix of the bracket that holds the Troodon 2.0 cable drag chain with the original PCB board on it for the XOL print head with Orbiter 2.0 extruder ( in reality the Galileo 2 Standalone (G2SA) and it is…
This small piece mates a piece of “blackpipe” from the hardware store to the top of a 100gal stock tank. This is a very common method of suspending a heat lamp so the tank can be used as a brooder. The benefit of this item is that with…
For those who want easy access to the firmware with an sd-card extension cable. Quick print, it took me around 10 min @ 0.2mm, 3perimeters (as most walls are 1.2mm). print upwards for fracture resistance of tiny back clip; built-in…
A remix of jlas1's fixed mount for the Klicky Probe to fit the Troodon 2.0 Pro Mini.
Remixed for BTT HDMI 5 v1.2 screen for Vivedino Troodon V1
Install the heatset insert in the hole of the mount. Thread the longer screw through a side or top panel while holding the mount on the opposite side of the hole inside the chamber of the printer.
Mounts the Tradrack on top of the troodon using the oem panel holes.
Hello, I made a remix of https://www.printables.com/model/693029-troodon-v2-pg7-adapter-mount Troodon v2 PG7 adapter to be able to put the PUG https://www.printables.com/model/378567-pug-parametric-umbilical-gland All this is to be able…
A simple template for Titan 30cm x 30cm (20w) brooder heat plates. My guess is this will fit all 30cm heat plates. Simply print out, then follow the terrible photo instructions provided. This saves so much time cleaning the poop from the…
Replacement legs for the Producer's Pride brooder plate in upright orientation. Printed in PLA, but PETG or ASA might be necessary depending on environment for heat resistance.
You need to print 2 parts follow the pictures for assembly require 2x M3x10
I needed a frame cage to keep a queen bee out of a particular frame so that it could be removed, without the queen having laid it up and the workers subsequently wasting energy tending to the larvae, and so the frame cage was created. It…
I printer this with ASA 40% infil, and same settings to a voron print This mod it s for some one need to search a model for Z pullet tensionner with the original hardware on the troodon but !!! exclusivement if you upgrade your Troodon on…
ROOD The Board Game (Based on the ancient game called '5 Lines') Fun Fact: ‘Rood’ is an older English ecclesiastical term for the cross Objective: (Winning the Game) Be the First Player to end their turn with all 4 of their coloured PEGs…
BTT Smart Filament Sensor mount for Formbot Troodon 2.0
I have remixed two models, but since I could not select an appropriate license, I am posting them separately. https://www.printables.com/model/1819506-troodon-20-43-display-mount-screen-case
I have remixed two models, but since I could not select an appropriate license, I am posting them separately. https://www.printables.com/model/1819503-troodon-20-43-display-mount-bracket
i couldn't think of a way to solve the wiring interference, so i throw a way the project.
A set of markers for the Brood Brothers Kill Team, prepared for multicolour 3D printing with FDM printers. Raised versions for printing without an AMS are also included. Available with both plain and camouflage backgrounds. Included…
