Wyniki wyszukiwania: scoot

Sortowanie

791 modeli

P
PrintablesPessimizer

Confidently Walking Scootaloo

Scootaloo, just walking around. (My Little Pony fanart.) Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645 Print instructions The model comes in two variants: one…

Pobrania
261
Polubienia
46
Ocena
5
P
PrintablesAlego

Key ring for Vespa Scooter - Schlüsselanhänger für Vespa Roller

Key ring for Vespa Scooter layer 0.2mm Colour change at: 0,8 2,6 3,2 Schlüsselanhänger für Vespa Roller Schichtstärke 0,2mm Farbwechsel bei: 0,8 2,6 3,2

Pobrania
246
Polubienia
23
Ocena
5
P
PrintablesMIJ90175

Bracket for hidden Apple Airtag on Segway Ninebot Kickscooter MAX G30D II

I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…

Pobrania
204
Polubienia
25
Ocena
5
P
PrintablesBambus

Monster Can holder for xiaomi electric scooter 4 pro 2gen

Its important to use the stiffest material you have and maybe some foam to increase friction so it wont slide down the bar If you want to save filament, time and don't care about a rough surface on the lower part, switch to snug supports…

Pobrania
91
Polubienia
19
Ocena
4
P
Printablescomputer22

🔑 Ninebot MAX G30D eScooter Chain Holder/Kettenhalter/Schlosshalter (3cm chain-Ø)

Please leave a ♥ Like if this print was helpful to you :-) This is a "clamp-on" design chain holder for the Ninebot G30D escooter and a max chain width of 3 cm. Holds the lock securely in place when not needed and also makes locking it on…

Pobrania
75
Polubienia
13
Ocena
5
P
Printablesjt001sk

Kick Scooter AirTag Mount

This mount is designed to discreetly conceal an AirTag when mounted on a freestyle kick scooter stem with a 32mm diameter. The AirTag is intentionally made inaccessible without the need to disassemble the stem. The holder features a hole…

Pobrania
67
Polubienia
7
Ocena
0
P
PrintablesFrankti

Nummernschildhalter Metz Moover E-scooter

Nummernschildhalter für den Metz Moover E-Scooter, da braucht man das Kennzeichen nicht mehr auf den Kotflügel kleben. Gedruckt ohne Stützen in Prusament PETG

Pobrania
58
Polubienia
1
Ocena
0
P
PrintablesMeimarkter

Scooter Mirrormount X9 125 evo

My Friends scooter tipped over and broke. I took some measurements and created some testprints. You NEED the original metall parts. The important measurements are good. The rest is enough “look alike”. While printing had some issues with…

Pobrania
44
Polubienia
3
Ocena
0
P
PrintablesLignumium

Egret Ey! E-Scooter Hacken (Hook)

Praktischer Hack für deinen E-Scooter! Diese Halterung wird direkt an die vorhandenen M5-Gewindelöcher am Lenkrohr geschraubt. Druck-Empfehlung: Für den Einsatz im Freien und bei Temperaturschwankungen wird PETG empfohlen. Für noch höhere…

Pobrania
13
Polubienia
2
Ocena
0

Micro-Mini Scooter Handle

A handle adapter for a Micro-Mini scooter. Tired of bending over to help your new-to-scooting child as they go along sidewalks with you? Tired of your rider running out of energy half way through a walk? Tired of needing to intervene to…

Pobrania
10
Polubienia
0
Ocena
0
P
PrintablesNoroPal

Garmin Varia mounting bracket for Kickbike scooters

Garmin Varia mounting bracket for Kickbike disc brake scooter frames. This is a highly modified remix of Tim Angus' files for Garmin interface. Changed main interface body to adapt to Kickbike rear fork, modified inner tolerancies to snug…

Pobrania
8
Polubienia
1
Ocena
0
P
PrintablesGFS

Keychain with logo. Electric scooter: Dualtron, Gotrax, Hiboy, Hiley, iscooter, Kukirin, mi, Nami, Ninebot, Niu, Razor, Sagway.

Keychains in various versions. Dualtron Gotrax Hiboy Hiley iscooter - 3 colors Kukirin mi Nami Ninebot Niu Razor Sagway Technical details: - Changing the logo color. The clip thickness without the logo is 3 mm. For a 0.12 mm layer - From…

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesTmpx64

Motorcycle / Motorbike / Scooter / Moped Keyring / Bike Keyring/Keychain - Key Charm - Gift idea - Gift inspiration - Klíčenka skůtru

One for every kind. Simple and fast to print. Just attach it through one of the wheels as shown in the picture. This is a very quick and easy print and a great way to use up the last meters of your filament. If you are looking for a…

Pobrania
3384
Polubienia
446
Ocena
5
P
PrintablesPlasticBarista

Scooter / Bike Phone Stand Mount (M365)

STLs All files are in correct Z orientation Main (Use one of the following) + main.stl (for ~22.5mm handlebar) + main-short.stl (shorter stem) + main-32mm.stl (for ~32mm handlebar) * jaw.stl * screw.stl Clip (Use one of the following) +…

Pobrania
2767
Polubienia
615
Ocena
5
P
Printables3DPS

Scooter stand

I created a scooter stand for the kids scooters so they were always upright and not lying all over the yard when not in use. Mine have been in use for a few years now and they work well. The stand just sits on the floor, but you could…

Pobrania
2474
Polubienia
211
Ocena
4,96
P
Printablesdaveh_dev

Skateboard / Scooter Wall Hanger Hook

Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…

Pobrania
1585
Polubienia
245
Ocena
4,94
P
Printablestomeck

Freestyle finger scooter

Print the parts separately. Some parts need to be glued together. Two steel office pins are needed. To enlarge the holes, heat the pin over something warm (candle, flame,...). Print at 0.15mm layer height using PETG.

Pobrania
1493
Polubienia
52
Ocena
5
P
PrintablesSoarpix

DEADPOOL SCOOTER - VESPA PRIMAVERA - SCALE 1:12

DEADPOOL SCOOTER - VESPA PRIMAVERA SCALE 1:12 If you want this as a multi piece thing you can get it here: https://cults3d.com/en/3d-model/game/deadpool-scooter-vespa-primavera If you have any questions, let me know in the comments. You…

Pobrania
1316
Polubienia
161
Ocena
5
P
PrintablesThomas

Autodrom/Autoscooter/bumper car Chip

Printed on an Ender 3 V2 20% infill Rafts Support Surface Ironing enabled, 10% extrusion PLA, 201°C Nozzle, 60°C Bed There are a lot of these types of Models online, take a look the first picture to see if your dimensions match with my…

Pobrania
1252
Polubienia
60
Ocena
4,75
P
PrintablesVize3Dtisku

50+ Keychains of moped, scooter, veteran and motorcycle

Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…

Pobrania
1151
Polubienia
176
Ocena
4,6
P
PrintablesGizmoThrill

Scooter the Tugboat

Scooter is our free GizmoThrill example model. This is the kind of fun-to-assemble kit you can expect to get every month in our Printables club . This kit features a functional crane as well as some other moving features like the rudder,…

Pobrania
1130
Polubienia
746
Ocena
4,7
P
PrintablesKyne

Bumper Car Chip Autoscooter Jeton

It is difficult to print this accurately since there is no good orientation. The originals (in colour) are most probably injection moulded. I printed it horizontally , the top side came out amazing with ironing but the bottom side…

Pobrania
992
Polubienia
27
Ocena
5
P
PrintablesFab5

Autoscooter Chip

Ein Nachbau eines Autoscooter Chip. Replika. Nicht zur offiziellen Nutzung in einem Autoscooter freigegeben.

Pobrania
953
Polubienia
22
Ocena
5
P
PrintablesLucien Picard

Scooter stand

Kids have different scooters, one with 110mm and the other 100mm. Wanted the same stand for both so designed this thing in Tinkercad. Probably fits different size wheels too as long as the ton exceed 25mm wide. All the scooters we have…

Pobrania
871
Polubienia
73
Ocena
5
P
Printables3DxDT

Mini 13 Scooter

Mini scooter for Mini 13. The main body of the scooter prints-in-place. Wheels and axels print separately. Once printed, place an axel inside each wheel, then place wheels in the scooter body. Use a piece of filament to thread through the…

Pobrania
848
Polubienia
242
Ocena
4,67
P
PrintablesMerganMcFergan

Mini Scooter* - Solid or Multi-Material**

This Mini* Scooter has full mobility on the wheels and handle bar. Printing suggestions: Print on its side at a layer height between .1 and .2mm. Supports are required, select wisely. Removing the underside supports without breaking the…

Pobrania
741
Polubienia
95
Ocena
4,75
P
PrintablesModu

Xiaomi Mi Scooter 1S, 2 PRO, 3 - Wall mount

In tested scenario scooter stands on front tire. Short-term testing proved it's able to hold scooter lifted. Printed in PETG with 60% infill, 0.2mm layer height. Compatible with: Mi Scooter 1S Mi Scooter 2 Pro Mi Scooter 3 M365 Pro (use…

Pobrania
698
Polubienia
141
Ocena
5
P
PrintablesJosé Pedro

Vespa Scooter - Iconic Italian Mobility Model

Capture the stylish spirit of Italian mobility with this 3D printable STL model of a Vespa Scooter. This iconic scooter model is perfect for enthusiasts of classic European design and city cruising, offering a charming piece for their…

Pobrania
684
Polubienia
64
Ocena
5
P
PrintablesNick Glennon

Rim Protector Xiaomi M365 scooter changing tire tyre wheel hub saver

Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…

Pobrania
590
Polubienia
138
Ocena
5
P
PrintablesLinex3D

Finger Scooter Street Version

This finger scooter is the second street version, which was built based on community recommendations. It’s light, durable, and great for play or display. After creating the best 3d printed finger scooter, I wanted to make it even better,…

Pobrania
587
Polubienia
19
Ocena
4
P
PrintablesJaanphsi

Autoscooter Chip

Don't use this chip without permission of the owner of the scooter I'm not liable for any damages caused by this chip

Pobrania
586
Polubienia
20
Ocena
0
P
PrintablesNarish Nakah

Xiaomi M365/M365 Pro/1S/Pro 2 Electric Scooter Back Mudguard

I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…

Pobrania
583
Polubienia
73
Ocena
0
P
PrintablesStigern

Scooter Capybara

🛴 Scooter Capybara – The Chillest Ride in Town Meet the Scooter Capybara , the ultimate symbol of slow-lane swagger! Whether he’s late for brunch or just cruising for snacks, this laid-back legend rolls through life on his trusty scooter…

Pobrania
576
Polubienia
62
Ocena
5
P
Printablesm-takashi

Retro Moped Assembly Kit - 1950s Inspired Mini Scooter Model

Retro Moped Assembly Kit 1950s Inspired Mini Scooter Model This is a 3D printable retro-style mini moped assembly kit. The model is designed like a small plastic model kit. Each part is arranged on a frame, so you can print the plate,…

Pobrania
561
Polubienia
190
Ocena
4
P
PrintablesGFS

Scooter Cup Holder

Cup Holder. Internal dimensions, diameter 66 mm to 83 mm, height 120 mm. Fits perfectly: TEFAL Travel Mug 0,36l Print in PLA or ASA, e.t.c Infill min. 30% It is possible to print without supports. Variations: With holes With the words Cup…

Pobrania
559
Polubienia
73
Ocena
5
P
PrintablesFuganater

Modern Key Hanger Fobs (Scooter/Tuk Tuk/Minivan/Motorcycle/House)

I imported the fob into Fusion 360 and added some simple designs to easily identify what each key was for. For me this was an electric scooter, minivan and a tuk tuk. I have included a .f3d file so you can more easily make your own!…

Pobrania
510
Polubienia
258
Ocena
0
P
PrintablesStan

U-Lock Holder for Ninebot G30LD e-scooter

Update03: Added Bracket for heat inserts M3x4x5mm. Update02: Added bottom hook for U-LOCK - ULTRA COMBO 245/153C. Update01: Addetd top hook for 25mm thick shackles with inner Diameter 100mm. Since theft protection is an important issue…

Pobrania
509
Polubienia
62
Ocena
4,75
P
Printablesalfrenovsky

Xiaomi m365 scooter mudguard bracket

Sturdier tha others and printable without support. NEW VERSION. With ears for better fixation.

Pobrania
505
Polubienia
55
Ocena
4,5

Reinforced Rear Fender Replacement for Xiaomi M365 Electric Scooter

Rear fender replacement for Xiaomi M365 scooter. This part is both stronger and lighter (160g) than the original one, though I did manage to break it after a while, so consider using one of the aftermarket fender supports. Print Settings…

Pobrania
489
Polubienia
43
Ocena
0
P
PrintablesDavid Krammer

Xiaomi Scooter AirTag Hook

Track your Xiaomi Mi Scooter with your AirTag and hang a small bag on it!

Pobrania
460
Polubienia
80
Ocena
4,8
P
PrintablesPatrik Zak

Xiaomi electric scooter M365 rear light cable guard

This protects the cable connector in the rear of the scooter from being damaged over time. I just glue it in.

Pobrania
450
Polubienia
77
Ocena
4,83
P
Printables3D Druck Felix

Scoot And Ride Extension

Take care with this part. It needs strong layer adhesion, so it won't break. I would suggest to print it in PETG with at least 6 perimeters and ~30% infill. Printing in a housing would also increase the layer adhesion. NOTE: If you decide…

Pobrania
449
Polubienia
15
Ocena
3,5
P
Printablesduckie13duck

ninebot scooter full twist throttle

full twist throttle for your ninebot scooter

Pobrania
445
Polubienia
9
Ocena
5
P
PrintablesBrettcnc

Rubber Boot for Scooter Stand. Segway Ninebot Max 30. TPU Foot Kickstand Cover

A Flexible Sock to go over the Scooter's side stand. Reduces chance of damage to floors and ankles and shins. I used: Filaform RED90A 0.8mm Solex Nozzle 100% infill If you place the closed end on the build plate, no supports are required.…

Pobrania
438
Polubienia
66
Ocena
4,6
P
Printablestrstn

Tempomat for Sowlow SO3 E-Scooter

Tempomat for Sowlow SO3 E-Scooter

Pobrania
429
Polubienia
34
Ocena
5
P
PrintablesLaiken Murray

segway ninebot e scooter twist throttle

infill:30-100 supports: yes brim: optional walls: 2-4

Pobrania
403
Polubienia
19
Ocena
2
P
PrintablesPaul Raunest

E-scooter throttle lever

you need a 3d printer an it need to be printet with support structure

Pobrania
401
Polubienia
19
Ocena
0
P
PrintablesTitan

Doc Green (Xiaomi M365, Pro and Mijia) E-Scooter Anti Vibration Damper 0.2mm to 2mm

Designed specifically for the Doc Green ESA 5000 (Xiaomi M365 / Pro clone) E-Scooter (periodically sold by Lidl) but potentially compatible with the Xiaomi M365, Pro and Mijia versions too (no guarantees however). These Vibration…

Pobrania
389
Polubienia
39
Ocena
5
P
Printablesrsdesign

Xiaomi Scooter AirTag Mount

Introduction I wanted an almost invisible mount for an Apple AirTag for the e-scooter. The best option here seems to me to be the existing reflectors. I'm not quite sure if these fit the different models in the EU or other countries. I…

Pobrania
386
Polubienia
44
Ocena
4
P
PrintablesStefan

E-Scooter Bag Hook with AirTag Compartment - Fits Segway Ninebot

I redesigned this hook to both improve the general look and feel to more seamlessly blend in with the general design of the Segway Ninebot Scooter and I also wanted to make it stronger and more effort to remove. This hook can easily…

Pobrania
350
Polubienia
57
Ocena
4,33
P
PrintablesSzymon

Finger Scooter

Do you like fingerboarding? Are you a skater? Print yourself a street finger scooter!

Pobrania
347
Polubienia
7
Ocena
0
P
Printables0d7i0s

Xiaomi Mi Electric Scooter Charger Wall Mount for 1S/Lite/Pro/Pro 2

This is a wall mount for a Xiaomi Mi Electric Scooter Charger Wall Mount for 1S/Lite/Pro/Pro 2 Category: Automotive

Pobrania
329
Polubienia
48
Ocena
5
P
Printablesdanny243

Dashboard Cover for Xiaomi Mi Pro 2 E-Scooter

The Xiaomi Mi Pro 2 e-scooter can be switched on by anyone when it is parked and equipped with different firmware, for example. The dashboard cover prevents unauthorised switching on of the scooter. It also protects the scooter's…

Pobrania
310
Polubienia
36
Ocena
0
P
PrintablesSonic

Keychain Electric scooter

Keychain Electric scooter

Pobrania
309
Polubienia
31
Ocena
5
P
PrintablesTamirC

Scooter basket for kids

Nice basket for kids Scooter. easily attached with clips.

Pobrania
304
Polubienia
79
Ocena
4,5
P
PrintablesZkaza

Xiaomi M365 Scooter - Folding Hook Ring

No Supports is needed. PETG, 4 perimeters. Original from: https://www.thingiverse.com/thing:3190522

Pobrania
300
Polubienia
42
Ocena
4,67
P
PrintablesMa Smi

Taschenhalter für E-Scooter Segway Ninebot Max G30D II / Bag holder for E- Scooter Segway Ninebot Max G30D II

Taschenhalter für Segway Ninebot Max G30D II Die Tasche wird normal Innen befestigt. Ich bin jedes Mal beim Auf oder Absteigen daran hängen geblieben. Wenn man sie Vorne und am Lenker befestigt, wird das Licht verdeckt und man kommt…

Pobrania
298
Polubienia
40
Ocena
0
P
PrintablesRedbeard

QS-S4 E-Scooter LCD glare shade

This is a sun shade intended to reduce glare on the QS-S4 LCD used on many, many brands of E-Scooters. Zero, Apollo, and many many other manufacturers and importers use this same LCD. I printed it last night, have not had a chance to ride…

Pobrania
298
Polubienia
23
Ocena
3
P

Scooter Hook

This is a pair of hooks for your My Electric Scooter. You can print either one, the other or both, as one is intended to serve as a hook for your bags at the front, and the other is just a support for your scooter lock. In order to attach…

Pobrania
298
Polubienia
39
Ocena
4,86
P
PrintablesDavid Marín

Scooter or Bike SmartPhone holder | handlebar support

This model use M3 screws and M3 nuts with 6mm of diameter in order to assembly bottom jaw to the scooter or bike handlebar. The screw used in the main jaw is a M8 bolt using 1.25mm thread. Enjoy it! Changelog: 2nd Sept 2023: I've change…

Pobrania
296
Polubienia
44
Ocena
5
P
PrintablesAshFlaw

Pusheen Cat Bookmark - Riding a Scooter

No special printing instructions required. Look good with filament change at 1.1mm height.

Pobrania
284
Polubienia
56
Ocena
5
P
PrintablesLinex3D

Finger Scooter

This is the best 3D printed finger scooter - small, fun, and easy to use! It looks and moves like a real scooter, with working wheels and strong parts made for smooth tricks. You can do spins, jumps, and other cool moves with your…

Pobrania
283
Polubienia
12
Ocena
0
P
PrintablesMandarkHaHa

Blunt Prodigy X Scooter Stand

Designed a scooter stand for my nephew. I made it specifically for Blunt Prodigy X Scooter Fits any scooter with the wheel size of 120mm x 26mm Printed in PETG, 0.6mm nozzle, 25% infill. no supports

Pobrania
281
Polubienia
11
Ocena
5

Kid's Scooter Stand

I've designed this stand for kid's scooters. It's stable enough to do not fall to the side with little alignment effort. It was made for scooters with 12cm x 2.5cm (about 4.7" x 1") wheels. The design has an indentation at the center so…

Pobrania
280
Polubienia
24
Ocena
5
P
PrintablesGoto Dengo

Front fender extension Silence S01 / Seat MÓ Electric Scooter

Three countersunk screws M3 x 10, three lock nuts M3 Best to print with ASA filament, or also with PET-G. No PLA. When printing 193 mm high. Remove the original fender: Unscrew two screws and the two reflectors together with the black…

Pobrania
278
Polubienia
14
Ocena
4
P
PrintablesCJJC

Scooter Stand - stand scooter flat against a wall

Most scooter stand that holds the scooter in its driving position, which takes a lot of space dur to the horizontal handle bar. This scooter stand holds the scooter flat against a wall. Fits 100-120mm wheels (trick scooters). I printed it…

Pobrania
268
Polubienia
28
Ocena
5
P
Printablesabzyweb

Stand for Scooter Xiaomi m365

A Stand i designed to have my scooter stand up somewhere without drilling holes into the wall to hang it.

Pobrania
267
Polubienia
56
Ocena
4,5
P
PrintablesFlorian Becker

Xiaomi Electric Scooter Bottle Holder

3D-Printed Bottle Holder for Xiaomi Electric Scooter (40 mm Clamp Diameter) This custom-designed bottle holder is specifically made for Xiaomi Electric Scooters and securely clamps onto the scooter’s stem with a 40 mm diameter. It is…

Pobrania
260
Polubienia
31
Ocena
5
P
PrintablesVacek238

Xiaomi/Ninebot scooter phone holder

The parts "Clip", "main-short" and "crew" are from the original model of the author PlasticBarista I designed a new "jaw" part because I had already broken the original model several times. It has two holes for 6mm aluminum rods. Hardware…

Pobrania
255
Polubienia
35
Ocena
5
P
PrintablesRhorin

Electric Scooter Display Cover (QS-S4;TF-100)

Basic design for display cover on an electric scooter. Display type is QS-S4. It also fits on TF-100. If you have other display try measure is. Inner diameter for this is cylinder high 20mm and width 60mm. It does not cover the display…

Pobrania
254
Polubienia
27
Ocena
0
P
Printablesjacekpom

Xiaomi m365 pro 2 electric scooter hook

3 models of xiaomi m365 pro or pro 2 scooter hooks (it will probably fit other models) the first is a slim version for light luggage need 14mm screw with flat head second one (strong) needs a longer 20mm screw with cone head and you can…

Pobrania
250
Polubienia
20
Ocena
0
P
Printablesbraga3dprint

Xiaomi Electric Scooter Deck Accessory

Elevate your Xiaomi Electric Scooter Mi 3's style and protect its deck from scratches with this 3D-printed accessory. It's designed for easy printing in PLA material and requires no supports, making it hassle-free to share and use. Key…

Pobrania
249
Polubienia
43
Ocena
5
P
Printablesgavin

Xiaomi Electric Scooter Rear Mudguard - Minimalist

A friend had their electric scooter mudguard break, so I decided to whip one up based on the hole sizes and the original shape, complete with light fitting on V10. The V11 version is more in line with the original profile. Printed in…

Pobrania
247
Polubienia
28
Ocena
0
P
PrintablesOpenDelta

Scooter Propeller

You need a bearing 608

Pobrania
243
Polubienia
28
Ocena
0
P
PrintablesGustav

Easy to install stealthy AirTag holder for Xiaomi M365 scooter

A replacement rear wheel nut cover that also fits an AirTag. Fusion 360 file is provided so it can easily be adapted for newer Xioami scooters. Print in picture was printed with 0.6mm nozzle and PLA. If scooter lives outside, PETG or…

Pobrania
242
Polubienia
57
Ocena
5
P
Printablesyetzt

Electric Scooter Cruise Control / Tempomat / Throttle Lock

A little clamp that arrests the accelerator lever paddle on an e-scooter with a ⌀22mm handle bar in a fixed position by friction. This sets the throttle to a certain position while avoiding sore thumbs.

Pobrania
242
Polubienia
16
Ocena
0
P
Printablesquantenquark

Scooter stand

I was looking for a scooter stand as the one we have always falls over in the garage. Mainly because the mounted lock is too heavy and the scooter tips over. The holder is now being added as an extension to the parking space for the stunt…

Pobrania
236
Polubienia
19
Ocena
5
P
PrintablesDoctorRudd

Gro-Scooter Remix

This is a remix of https://pinshape.com/items/7974-3d-printed-gro-scooter . I cutted some parts into pieces for easier printing without support. Please print wheel halfs 4x. Enjoy Print Settings Rafts: Doesn't Matter Supports: Doesn't…

Pobrania
235
Polubienia
30
Ocena
3
P
PrintablesOntagrel

Scooter Throttle Adapter

Its an adapter that fits over your throttle switch. It gives you a second thumb location to push on. I found the original location to be way too low for someone as tall as me. This makes it more convenient to hold down on long trips. It…

Pobrania
234
Polubienia
38
Ocena
0
P
PrintablesBinjo100

Electric scooter throttle accessory

This is still in early stages. Please give me feed back. Make the model bigger or smaller so it fits yours.

Pobrania
234
Polubienia
19
Ocena
0
P
PrintablesHonza

Scooter

Kit card scooter model. It can be printed as a two-color model.

Pobrania
233
Polubienia
85
Ocena
5
P
PrintablesOlivier Boesch

Freestyle scooter Wheel

A fully fonctionnal 100mm Scooter Wheel for freestyle. Rim made of nylon (nanovia pa6) and type made of TPU (esun TPU). Sucessfully tested by my 7 years old child. Printed with 4 perimeters, supports on the central part for the rim,…

Pobrania
232
Polubienia
31
Ocena
5
P
PrintablesPawel G.
Pobrania
229
Polubienia
16
Ocena
0
P
Printablestimf

Xiaomi Mijia M365 Scooter Front Mudguard

Broke my front mudguard (by over tightening the screw) after replacing my front tire. Definitely needed when driving through the rain! Position the model on it's side on the build plate. Support on the wheel side probably isn't necessary.…

Pobrania
227
Polubienia
39
Ocena
5
P
PrintablesSourSalmon

Chip für Autoscooter AH

Ein Chip für den Autoscooter

Pobrania
227
Polubienia
6
Ocena
0
P
PrintablesSimas

Ninebot by Segway Kickscooter hook hanger

For Ninebot Es1 Es2 Es3 Es4 kickscooters.

Pobrania
224
Polubienia
18
Ocena
0
P
PrintablesScii

NIU KQI 300x Electric Scooter Thumb Throttle Adapter

A remix of Supi99's design here . I just got a KQI 300x and really don't like twist throttles on standup scooters. This adapter makes it a hybrid design, so I can use both the thumb and the twist portion. No hardware required, just a drop…

Pobrania
220
Polubienia
7
Ocena
0
P
PrintablesXXXaK

Xiaomi scooter stand

A stand for a scooter, print with at least 5 perimeters and 30% infill, a doublesided tape was used to stick it to the ground, see the photo on how to set it, in case you need different side just mirror the print

Pobrania
219
Polubienia
45
Ocena
0

Xiaomi Scooter 1s, Pro2, 3 rain cover

Print Settings Printer Brand: Anycubic Printer: Anycubic I3 Mega Rafts: No Supports: No Resolution: 100 Infill: 10 Filament: Doesn`t matter something clear would be best Notes: Category: Sport & Outdoors

Pobrania
211
Polubienia
20
Ocena
5
P
PrintablesPessimizer

Bouncing Scootaloo

A happy, bouncing Scootaloo! Inspired by the drawing by Imalou: https://www.deviantart.com/imalou/art/Here-s-my-aunties-733431313

Pobrania
208
Polubienia
24
Ocena
4,25
P
PrintablesChristoph

U-Lock Mount Xiaomi Scooter M365 / M365 Pro

I've created a mount for a U-Lock for my Xiaomi M365 scooter. The diameter of the lock rod is ~14mm so the hole is 14.5mm. You need 2x M3x10mm Socket Head Screw and 2x M3 Nuts. Print with PETG for flexibility & strength. I've added the…

Pobrania
203
Polubienia
35
Ocena
0
P
PrintablesLars

Wall bracket / mount / hanger for Xiaomi M365 Scooter

What's this? This is my custom wallholder for a Xiaomi Mi M365 Scooter, including space for the powersupply. I wanted to create a design which doesn't look too bad, is able to securely hold the scooter and also doesn't need a ton of…

Pobrania
203
Polubienia
37
Ocena
5
P
PrintablesBrickDreams

Mega-sized Brick Classic Space Scooter (5:1 scale)

This is a set of blocks that can be used to recreate the Classic Space Scooter published in 1981 at 500% scale. The stl files for the parts have all been organized into folders to make them easier to find. Please use the following table…

Pobrania
191
Polubienia
42
Ocena
5
P
PrintablesFalling Entropy

Scooter - mini sculpture

This minimalist sculpture of a scooter goes well with many decors. The sculpture is freestanding on a desk, shelf, cabinet, etc. Prints fast without supports.

Pobrania
191
Polubienia
24
Ocena
5
P
PrintablesDanol

DNL Sencor Scooter 2020 Mudguard

NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing. Mudguard/fender for the Sencor Scooter 2020 e-scooter. Might work on other models as well, I'd be very happy if you tested it out and let…

Pobrania
185
Polubienia
25
Ocena
5
P
PrintablesRosario

xiaomi m365 pro 2 scooter cover with logo

modello della cover dello schermo per il monopattino xioami m365 pro 2 con logo xiaomi

Pobrania
184
Polubienia
18
Ocena
0
P
Printablesblkhawk

Scooter Hook

This model supports an enlarged screwhead of 10mm and a screw distance of 24mm. I just enlarged the screw holes laterally so it should also fit the original distance of 24.6mm should this in fact be the right one on your scooter. One…

Pobrania
182
Polubienia
36
Ocena
5
P
PrintablesJonas

Footrest for Globber GO UP Sporty Scooter

This is a model of a scooter footrest. The model is compatibel with the scooter “Globber GO UP Sporty”. Print settings Printer Brand: Creality Printer: Ender 3 S1 Pro Supports: No Infill: 80% (for extra strength) Layer height: 0.2 mm…

Pobrania
180
Polubienia
2
Ocena
0
P
PrintablesAlberta3D

Star Bike Handle Grip for 22mm scooter handle bars

My Daughter requested star pattern grips, so I made some. Printed in TPU, with the hole in them for tassels! Fits the standard bike handle bars. but you can scale them to fit yours. a good test is to just lower it through the bed before…

Pobrania
180
Polubienia
20
Ocena
4,75

Xiaomi M365 Scooter Rear Light Cable Guard

I took the already great idea and improved it in the following aspects: 1. Added two clips, meaning you no longer need to glue the part onto the scooter. This works best with PETG, since the clips are very strong and springy then. 2.…

Pobrania
179
Polubienia
30
Ocena
5