841 modeli
So tired of untangling my ECG cables, or honestly watching my EMT untangle the cables according to my partners. One for each, 4-lead and 12-lead. Printed at 12% infill using PLA, will see how it holds up. It is a friction fit for the…
Wydruk około 0,42 €–0,51 € nettoWstępna wycena jednego wariantu
0.15 mm layer Prusament PETG print with supports
Wydruk około 9,15 €–11,19 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Designed to be a wallmount for the "DSLRKit PoE Splitter", available from https://www.aliexpress.com/item/32829719175.html, but also eBay, Amazon. There seems to be (at least on Amazon and AliExpress) a few different vendors supplying the…
Wydruk około 1,40 €–1,71 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It is a tool to spread the end of the inhaler. The head can be unscrewed and the bottom part can be screwed on to the inhaler's original threads. The design is made for the brand "nózi" but with little modification it may work with other…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena jednego wariantu
Part These splitters can be combined with Party Flags by Quin | Download free STL model | Printables.com . Printing tips The flag face should be only one layer thick, so make sure your first layer prints well. The models work best with a…
Wydruk około 0,07 €–0,09 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I usually print in MMU Single and sometimes I'm having trouble with the splitter at the load of filament and also this frees some tension on the X Carriage putting aside the rest of the tubes. This works like a charm. Created two…
Wydruk około 0,46 €–0,56 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Splitter for IR sensor Prusa Core One - version 2 from the previous version has modified filament routing through the IR sensor and shortened input splitter so that filament ejection is fully functional. The proposed solution does not…
Wydruk około 0,43 €–0,53 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this to cut pills into smaller, more manageable doses. It's typically used to divide tablets that are not scored (pre-marked for splitting). This allows for an easier more precise method of medication management, especially for…
Wydruk około 0,56 €–0,69 € nettoWstępna wycena jednego wariantu
Snap-fit DIN rail mount for the TP-Link TL-POE10R PoE splitter . Designed for horizontal printing with no supports required. The splitter should be oriented so that its output faces the spring-latch side of the DIN rail clip.
Wydruk około 0,77 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Cookie cutter with log splitter symbol. https://www.vari.cz/en/product-catalogue/log-splitters/cc:20061/ Print instructions Rafts: No Supports: No Resolution: 0,2 Infill: 25% Printed from ABS SMARTFIL with FCM certification
Wydruk około 0,63 €–0,77 € nettoWstępna wycena jednego wariantu
Print with ABS or PETG with brim and without support. Cut bowden properly at 90 degrees and insert fully (15mm, using a rag and some force; the bowden inputs are slightly conical). It will hold very well. If you have problems, you could…
Update 2023-11-07: Added a “long slot” version to accommodate some inconsistencies in the length of the PTFE tube sticking out the back of the printer that feeds the hot end. I want to thank users @xenon2008 and @Tvorim3D for leaving a…
Please download from Makerworld. This STL is not the latest revision.
Update 23rd November v2.1 Added an additional model suitable for 6x2mm magnets. Update 14th November v2.1 Added an additional model suitable for 5x2mm magnets. Update 13th November v2.1 Added an additional model suitable for 6x3mm…
A splitter as already presented here, but not with magnets, but with M3 screws attached to existing threads. It is available in two versions. Once flat and once an arm rotated by 90° in the direction of the spool, in order to be able to…
*** Thanks for checking out this model! *** If you appreciate what I'm doing, consider buying me a coffee , and check out my other models for something else you might like! ********** Thanks to the awesome Delta P duct design by @teookie,…
Update 2023-08-01 #2: NEW VERSION! I have created a new and improved “no-catch” y-splitter Check out and download the new version here: Bambu AMS No-Catch Y-Splitter PC4-M10 I want to thank everyone who who downloaded and posted makes and…
AC Power Cord splitter (Kettle Cord) mk1 This was part of my 3D Printer enclosure projects to tidy up the cables on the back of the enclosure. Uses a standard ‘chocolate bar’ electrical connector This design comes with: The body of the…
This Fitting Insert is inserted into the threaded end of the “Y” Adapter PC4-M10 PTFE Connector to reduce the chances of the filament getting stuck as the filament exits the “Y” Adapter and goes to the printer. I printed @EdJohnson's…
These are not as good as buying real release rings that have metall teeth , but they have worked for me without any problems. I am lazy and didn't want to order the extra parts recommended for Brandon Raineris great Over engineered…
Print with ABS or PETG with brim and support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. After printing, remove the support by pushing filament through one of the opposite entries.…
Update 10/27/22: Some user has asked me for a version to fix on the machine and here you have it to test. Attached is a "beta" version of the divider to fix in the corner of the machine with double-sided tape. I emphasize beta. It would…
I needed a three way connector for my X1C when using the AMS, an external spoolholder and a Filament drybox. This is the design I came up with. For external parts you need 4x PC4m10 bowden tube connector. Make sure you have the connectors…
Wye? Y? Thinking they really should be wye since that's what they are called in plumbing. ...ANYWAY... Why another wye? Obviously because none quite worked for me. I had issues with friction and really bad luck with crappy imported…
Hose splitters for all common (at least what I could find online) hose sizes. Designed to need minimal support. When printing suggest you stand it on the single end. If needed add support in the center of the split. All adapters have:…
Tube Y fittings for connecting different sized soft tubing together. Has Barbs to give a secure fit on the hose. Designed to need minimal support. Print standing up with larger end on the bed. Brim might be helpful for the smaller sizes.…
THIS HAS NOT BEEN TESTED ON A HUMAN Let's be clear: if you print this and use this on a patient, that is your responsibility. I make no representations as to the safety of this device. It's an experimental model designed to stimulate…
Bambu Feed Splitter UPDATE Purpose Many versions of these are available on the site. They attempt to solve a basic problem when dealing with the AMS. There are filaments that will not a few the AMS for a few reasons. This means that you…
Y-splitter to make it easier to print with or without the AMS. Designed for standard profile PA-CF or PAHT-CF, 0.3mm layer height, 0.6-0.8mm nozzle. The fittings just threads right in. Uses 3x PC4-M6 which can be ordered of Amazon of Ebay…
I call this the "Instant" version of a Y-Splitter, because it requires no separate purchase of Bowden connectors, just print all necessary parts! Basic Features: No extra parts needed, click and print. PTFE tubes held in place securely by…
I use JDJDJD's excellent Smoothy Y-splitter for Bambu's AMS on my P1S and tuned it for my newly arrived K2 Plus. Much of the instructions are provided by him, with thanks. You will need 3 x PC4-M10 ‘black’ connectors which screw into the…
About the Splitter: Most Y-splitters are printed vertically, which can cause unwanted filament friction inside the part. To solve that, I designed the Quick-Lock Y-Splitter . Thanks to its horizontal print orientation , the filament…
A compact, 3D-printable pill splitter designed for convenient tablet splitting. The hinged design allows easy operation, while the recessed cutting area helps position the tablet. The model folds into a compact shape for easy storage and…
Remix of @EdJohnson 's design, with the following changes in order to avoid snags; AMS and Spool entry PC4-M10 connector threads previously did not bottom out as the outlet port did, so made all PC4-M10 entry threads bottom out (metal nut…
This is a 4 inch duct 2-to-1 splitter that is fairly compact and easy to print. No supports needed. See also the Endcap model here: https://www.printables.com/model/637194-4in-4-inch-duct-splitter-endcap Source document:…
A more simple Y-Splitter for the Bambu Lab AMS PTFE connection.
Es ist ein Modell nach einem Schwertes aus Genshin Inpact. Das 3D Modell würde für ein Cosplay nach Bildern erstellt. Die Einzelteile passen auf eine Druckfläche von 270x200. Die Gesamtdatei kann aber auch selber in Teile zerlegt werden…
With the help of the Fusion360-file of the version2 (with mounting hole) of the Y-Splitter remake of Brandon Raineri, I have adapted a version with M10y1mm PushFits, since the recommended McMaster-Carr part is hard to get in Europe. I use…
I frequently change between MMU3 use and regular mode use. To avoid swapping tubes between MMU3 and regular use I created a Y-Splitter, which is compatible with the Prusa CORE One and the MMU3 Enclosed version. Since the length of the…
This is a splitter that turns one fan header into two. It makes it much simpler for wiring up toolheads that have two part cooling fans (Dragonburner, Xol, etc). There are two types of the main body. One designed to fit in the space on an…
Are you breaking your fingers trying to snap those tiny pills? And the cutters with the blade send them FLYING! This small pill snapper gives you the right angle and force to snap those pills with ease! And it fits in most prescription…
Added a very gentle 75 degree internal chamfer (see images) to help with filament getting stuck when loading, which happened to me every time with the original. There is still about 0.5mm of flat for the ptfe tube to square up against,…
Optimized for ease of printing and assembly. The main body prints in one piece with supports to clear for the slot for the gates. Gates come in two pieces; the bottom piece can be bolted (m4) or glued on after you slot it in the gate.…
I've designed a solution for my Qidi Box and Qidi Plus 4, integrated with a Sunlu dryer. Y-splitter allows all components to work, and eliminates the need for frequent reconnections. Please look for pc4-m6 “through” type, for reference…
Please give it a 💖 if you like it 🥰 🪧 My Kobra 3 slicer profile 👉 https://www.printables.com/model/1019343-anycubic-kobra-3-combo-slicer-profiles-for-anycubi You can get a second Ace Pro there: on Geekbuying 👉 https://kgy.yt/ganyacepr on…
Materials: 3 x PC4-M10 pneumatic connector, inner diameter: 4 mm 2 x M3 6mm Settings: Support BUILD PLATE ONLY Brim-object gap 0.3mm
Hey everyone, I've been looking for the Y-splitter which: -Looks good -Works well -Can be attached to the frame -Get ride of the stock coupler -Is invisible from the front of the machine Well… I had to roll my sleeves up ! Here is my…
Cigarette Splitter that makes it possible to smoke 4 Cigarettes at once. Smoking is incredibly harmful to your health and can lead to serious and life-threatening conditions. Avoid smoking at all costs. If anyone has any questions please…
This is a Multiple Tube Splitter for Bambu Lab A1 and A1 Mini with AMS Lite. Just insert the 4 PTFE into the splitter. You dont need an extra PTFE extension underneath to the genuine hub. The filament at the two slots behind of it (Slot…
Print with ABS or PETG. Use auto rotation, no support. Don't use too much force when screwing in the PC4-M6's. Screw the small part to the printer (see picture), remove existing screw first. Remove the coupler from the printer. Screw in…
Improved PTFE tube grip for more secured grip. Added two hidden very strong Prusa magnets for easy and quick mount. Changed to M3x8mm bolts without any inserts. To assemble and mount PTFE Tube Y-Splitter you will need the following*: M3x8…
Just mirrored the 32mm connector instead of the garden hose. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 200 Infill: 25 Filament: any PETG ABS any Notes: Just mirrored the 32mm…
I found the relocator of SPEKERDUDE but not the Y-splitter he used. So I found the Y-splitter of InterlinkKnight and put them together for my Anycubic Kobra S1. You will need three PC4-M10 fittings and two screws M2,5 x 4 mm. If you could…
As the name. You need 5 JP4-01 or PC4-M10 to use this. The JP4-01 has shallow cut so it's preferred to minimize the filaments getting stuck.
I created this simple PTFE cap in response to a question about air leaking into the AMS unit from my y-splitter ( Y-Splitter for the Bambu Lab X1C AMS ). While I haven't had any issues, it does raise a valid point if you are in a high…
The original model was great, but designed for rear mounted spools. I rotated the Y part about 85 degrees to make this side mounted version. I only converted the Y_Splitter_PC4-M10_V2_rw.stl. Requirements: 3x PC4-M10 pneumatic connector,…
Habe hinten 3 Aussparungen für Magnete 6x3mm hinzugefügt. Ausserdem die Bowden-Eingänge mit “AMS” und "EXT" beschriftet. Das ganze ist MMU und AMS tauglich. Kann also als Multimaterial-STL gedruckt werden. Remix von…
I remix the model from LayersFarm https://www.printables.com/model/308131-bambu-lab-y-splitter-with-pc4-m10-pneumatic-connec/files in order to fit my 8x3mm magnets.
just a simple MC4 disconect tool Category: Tools
I printed with 0,4mm nozzle an 0,12mm layer height. Threads turn out nice. If want to do it even better adapt the layer height at the threaded area to 0,08mm. But as told it works nice with 0,12 as well. Hole for screw is 3D print…
Testing ongoing ! Experimental ! Centrifugal fans have an uneven air flow at the outlet opening. The original and various other print fans therefore have different air flows on the left and the right coolig outlets. To counteract this,…
It's the only one I've found on this site that's really compatible with my bambulab X1C and above all that doesn't jam when the AMS changes filament, which unfortunately many others did. I lengthened the upper part a bit and added 2 holes…
This allows using an external filament when having an AMS. The difference between this one and the other ones is that it allows a smooth transition to prevent getting stuck (which happened with other models) and it's as short as possible.…
UPDATE: Now includes files for M3 with threaded inserts, based on community feedback :) I saw some posts online about printed Y-splitters being unreliable. Thought I'd design my own because, why not? This model does not require any tube…
***0.12mm layer height required*** After having problems with filament hanging up where it exits the splitter I wanted a design where the PC4-M10 connector could sit as flush as possible with the bottom of the hole. Most designs I've seen…
Drip/micro-spray splitter connecting to Gardena hose pipe. The requirement was to water bonsai trees, using micro-spray heads on flexible pipes, from a ten-way splitter connected to a hosepipe with Gardena fittings. The final design does…
In printing with Polycarbonate I decided it was time to create a Y-Splitter so I can leave the PC spool in the external drying box. This way the humidity level will stay well below 20% and I won’t have to plan so far ahead to re-dry each…
A splitter for garden hoses. The required O-Ring can also be found with my other models. Happy watering :)
This is a remix from the Y-Splitter for Bambu Lab X1. add 10mm Brim no Support needed print with ABS or PETG the O-ring of the fittings must be removed…
Splitter Diffuser Tunnel for Race Cars splitters etc. Quite large, you may want to scale it down depending on your application. Print Settings Rafts:No Supports:No Resolution:0.2 Infill:100%
This is a work in progress, 4-way filament splitter, not yet tested. Threads are for M10x1 couplers, PTFE tubes with OD4/ID3mm. Outlet below has a so called sacrificial layer, to print without supports. Only 0.2mm thick, it can easily…
Hey everyone, I made a simple PTFE Y-Splitter for my Creality K2 Plus and the CFS. This means you won’t have to switch tubes between the CFS and the Spool Holder anymore. Feel free to use it if you need it, and have fun! You will need - 6…
This is a remix of JW's ECG Cable Splitter. I found the splitter would come apart more frequently than I'd like so I made it clip together. The clip is best printed on its side with supports enabled to increase durability. Printed on a…
This is a simple 4-way Y splitter designed for use with the 3MS Modular Multimaterial System . This splitter design uses 5x ECAS04 fittings and is intended to be printed at a 0.2mm layer height with PLA or ABS/ASA (PETG is too soft).…
Remixed to use more common M3 screws and M3 Threaded inserts. Does not need supports. Use six M3 by 6mm Hex or Button head screws and six M3 4.6mm OD by 4mm length threaded inserts. UPDATE 1-7-2023: Added two back versions with holes for…
An in-line splitter box for any standard Neutrik D series type connector. Insert whatever Neutrik D type connector you require, wire up however you want and away you go! Hours of audio fun. Print instructions Supplied Print file is PLA.…
This is our new MINI splitter for the mod MMU2+1s. Recommended print settings: Material: PLA… but recommended PETG or ASA/ABS or resin 0.2 mm layer height QUALITY preset, 3 perimeters Infill: 20% GRID Position: splitter filament entry on…
I tried about 5 different version of the Y-splitter but the filament kept snagging on the edges of the entry of the tube. Finally decided to create my own version. This version takes into account the wider 2.5mm inner diameter of the…
Exhaust duct for my resin and cnc enclosure. Needed a solution to split in-line 125mm fan to both so I came up this this. Each inlet has a check valve with a lever. OD: 129mm ID:123mm Parts Needed: 8mm rod Installation Instructions: Print…
[EN] Improved v3 MINI splitter for the mod MMU2+1s: use of ECAS04 PTFE connectors ( https://s.click.aliexpress.com/e/_v0glA2 ) improved filament path reduces PTFE angle for less movement stress easy print using FDM (ASA,ABS,PETG,PLA) or…
I Remixed the Y-Splitter to use the Bowden Collets leftover from my ERCF build. I Printed this one on my Voron 2.4 (Still Waiting on the X-1) in KVP ABS with the single end on the build surface. I did use painted support on the interior…
Remix to allow switching vacuum between 2 tools. Switch:: path 1 - off - path 2 Scale to 85.5% for fitting to irish std 40mm waste pipe - use M3 instead of M4 fittings. Assembly Note: ball is not reversible - placement will align to…
Printed using a tree support. Wiring was done as follows. Cut the red line from the 4pin cable and connect it to the COM and N.C of the limit switch respectively. The AMS will switch off automatically when you insert external filament.…
This is yet another Bambu Labs X1 filament splitter supporting external filament source and AMS without requiring the ptfe tube to be removed from the back of the X1. Had issues with other splitters so I designed this one to allow for…
Exhaust duct for my Elegoo Centuari Carbon and painting booth. Needed a solution to split in-line 4" fan to both so I remixed this very good design created by @DOOM. Each inlet has a check valve with a lever. OD: 3.8"/96.4mm Parts Needed:…
Based on the Bambu Lab Over-Engineered Y-Splitter version 2, I modified the filament entry side for a smooth filament entry and do not catch up due to the gap between the PTFE tube and the entry. In the picture, on left is the original…
20-way splitter for DIY home automated irrigation system Designed for: 1x input hose 8mm (inner diameter) 20x output hoses 4mm (inner diameter)
Core One MMU3 Y-Splitter using E3D V6 Collets, mountable on the Swing Arm. There is also a Y-Splitter with Bowden collets available if no E3D V6 collets are available. Changes 27. October 2025: Removed old files (obsolete), added step…
I modified the original design to suite my magnets with 10x2 mm size please follow the original poster instructions
I designed this splitter to work with 2.5" standard shop-vac friction-fit hoses. This has one female inlet and one each male and female outlet. This specifically fits the configuration I have for my miter saw dust collection system.…
Print with ABS or PETG with brim and no support (only touching print bed). You need to rotate the model so that the single entry is at the bottom. Don't use too much force when screwing in the PC4-M6's. Fully push the bowden tubes through…
I was using this Y splitter as was very simple Bowden Y-Splitter for Bambu Lab X1 by ZzoyozZ | Download free STL model | Printables.com However, as it was free to move around, filament would catch and kind of ping within the tube system.…
I found that most PTFE splitter models available use S-shaped and/or tight radius curves. These work fine for normal unfilled filaments, but I print a lot of glass fiber nylon and I've found that those designs cause a lot of problematic…
PolyDryer Splitter Mod – Dry Two Spools at Once Thanks to this mod, you can dry two spools at the same time using a single PolyDryer unit. This design is ideal for users who own only one dryer and want to optimize their drying process,…
I remixed the model from LayersFarm to fit a M6 pneumatic connector instead of M10. It's the model for 5x5mm magnets .
As the name. Made for BAFS v.01, but can be used for other similar use. You need 5 PC4-M10 to use this. Inspired by other splitters: https://www.thingiverse.com/thing:2444687 https://www.thingiverse.com/thing:2867089…
Update 2022-07-19: There's now a generic version of the vent adapter which attaches using zip ties, and two different nozzles (45 degrees and 60 degrees). This is an adapter system that clips on to the rear centre console vent and…
This is a front splitter for the Tamiya TT02 Audi V8 RC car kit. This part has been designed to install into the existing lower bumper holes with two M3x20 machine screws, however M3x15 will also work without issue. Printed out of PLA or…
Heavy duty wall mount solution to merge two 4in (100mm) ducts to one. Great for people with more than one 3D printer wanting to vent the fumes. Strong, secure fit I will be uploading more 4inch ducting parts soon LINKS TO THINGS YOU MIGHT…
A remix of ZzoyozZ's Y splitter. Put it in a box, added some 10x3mm magnets, stuck a logo on it. 01/26/23 Added one modded for 8x8mm magnets.
![#0017 [Remix] X2 Delta P Duct [V2R2.2] for the MK3S(+) [New Flow Splitter]](https://media.printables.com/media/prints/155387/images/3720913_fbdbd996-a1de-4291-8b9e-a4c2554d6d73/mod2-and-3leds.jpg)
