108 modeli
This mount for the Buddy3D camera is specifically designed for enclosures made by 3DUpFitters, and replaces the original corner bracket in the upper-front-right corner of the enclosure. The design consists of two parts to allow the camera…
A two-piece corner clamp designed to help keep your fitted sheet from slipping off the mattress. The base sits against the mattress corner, underneath the fitted sheet. Pull the sheet over the base, then fit the outer clip to hold the…
Fitted sheets folds over the corners of a mattress, held in place by elastic. But sometimes they slip up, releasing from under the mattress. Additional elastic is required to keep the corners put. I tried…
Washer and spacer are fitted to go through a pegboard hole for easy mounting that doesn't require an extra set of hands. This will keep your pegboard just far enough off the wall you are mounting it to, plus it gives you flexibility in…
If You find this design useful, Please consider sharing a Make or leaving a comment. It's always good to see my efforts in use by others out there and it often inspires me to make improvements where I can. Without feedback I just draw a…
Printed with supports, .8 nozzle in PLA. I'm sure there would be absolutely no issue printing this with .4 nozzle
NASA fabric that fills a Prusa MK4 buildplate
The rugged box, itself, is a remix of - https://www.thingiverse.com/thing:4757317 I printed the yellow "inserts" with TPU to keep it from marring the GoPro. The top of the box was printed at 100% infill with PETG. The bottom of the box…
This is a hook to hold a single hat on the wall. It was designed with fitted baseball caps in mind, but it's equally useful for adjustable caps, beanies and other hats. Plus, anything else really. It gets stuck to the wall with a single…
Hello, This accessory prevents the sheets from coming loose, and the tabs keep them securely in place. It's sturdier than the basic model and not as high. the supports are already in the model Thank you for your feedback.
Notes I only have a WE MP5, so my dimentions may be slightly off for other brands but this should work on pretty much any MP5 including MP5SDs. I have had one make now confirming fitment on a MKE AP5 (Turkish MP5 clone). Hardware If you…
I am using the nice enclosure provided by 3d upfitters and I wanted to improve a little bit the air management system (Change the fan size) of the enclosure. The enclosure is provided either with an 80mm fan or 60mm depending on if you…
These are storage trays for the new edition boxes of the board game Arkham Horror LCG. Most of the trays are narrow and the same width as the token storage boxes designed by olivvybee…
Hello everyone, Here is my C920 camera mod, please follow the disasembly guide below to remove the current mount off the camera. Please keep the 4 bottom screws from the mount as you will need them for my mod. Instructions For Disassembly…
Friction fitted Magwell for hi capa airsoft gun
I modified the model to fix the problem with the oval hinges. You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
I resized the model to fit intel Xeon socket LGA 2011 v3 You just have to slide a piece of 1.75mm filament into the holes in the hinges. Print without supports for better results. Thanks ! - Guimz
I added a ceramic tile below my printer to reduce noise and vibration, and that raised my printer up by 1 inch. This meant that my 3DUpfitters Enclosure no longer fit perfectly around my PSU. To fix this, I created and printed a 1" riser…
This is designed to hold a 28BYJ stepper motor in place to rotate the worm gear driver found in most household blinds. There are other projects which mount a motor in a 2" track and drive the rod directly. My blinds are a 1" track and…
Cutting template for making cloth sewn face masks. Instructions at Hacktastic: https://mathgrrl.com/hacktastic/2020/07/fitted-face-mask/ Print instructions Cutting template for making cloth sewn face masks. Instructions at Hacktastic:…
Looking at all the other ammo boxes around I did not find anything I liked. Either they used square holes, limiting how much they held, or they were an odd size that didn't fit my ammo cans... So I just made my own. I targeted the 3 types…
Exhaust mount and plugs for the many openings on the 3D Upfitters MK2/MK3/MK3S acrylic enclosure. Print instructions The strip plug and solid plugs can be printed in any material, but I was able to print them all in TPU to create nice…
Needed some new lampshades for 2.5" lip-fitter pendant lamps. Print upside down, be mindful your overhangs for the first few layers. Insert color changes for added fun!
Its a box to catch plastic waste. Insert 2 magnets into the slots. put 2 more on the outside of the box and attach foam tape to those magnets. Gently push against the side of the printer to align the mounting magnets. Includes design file.
Remix of this silencer but including slots to hook a badge holder so that your silencer doesn't take off on you.
I am using an enclosure from 3dupfitters for my Prusa MK3 and I wanted to use the multicam possibility offered by octoprint. Only problem was to find an elegant way to position the second web cam in the enclosure knowing I am already…
This variation is exactly the same size as a standard 80mm fan to appear flush when mounted directly to fan. Low profile
I've almost always used spool holders with 608 bearings to reduce the drag when the filament is pulled off the spool. For my MK3(now MK4) printers I used a modded version of this…
Odell Creations presents the Paint Carousel designed to fit 12, 24, or 36 Apple Barrel acrylic water paint containers or similar bottles. Each tray holds 12 containers. You have the option of just printing a two tier or a three tier or…
Honda groms have one problem in my eyes, THEY DON'T HOLD MONSTER ENERGY CANS ON EITHER SIDE. This model remedies it, you'll need 2 m8x35 screws just like the original can clip but I widened the opening slightly so more various sizes can…
I adjusted the Originalmodell V2 so it fits on a Bambu P1/X1
This is a custom fitted 2-piece shelf that I use for my personal homelab. Feel free to use it or modify it if you have similar setups as mine: The lower shelf features a drawer for storing cables/accessories, it is designed to fit a 4-bay…
Are you tired of the butter that does not fit your butter brick? Here is the solution. The “perfect butter fitter” is the solution to a problem never fixed. Print 10% infill. For better looking letter, use support.
Kingroon KP3S - X Belt Tensioner for a commercial aluminum tensioner from amazon
https://www.youtube.com/@Wild190cart If you like this model, don’t forget to check out my other creations in my collection — you might find something else you’ll love 😉 Thank you so much for every download, like, and support. I truly…
0.8 MOD gear 22T, 30T, 40T & 60T (for stepper motors fitted with hex shaft coupling connectors). I apply these gear wheels for focuser & rotator control of telescopes via ONSTEP ASCOM driver. One M4 flat-head (8mm in length) screw is…
I am using the nice enclosure provided by 3d upfitters and I wanted to improve a little bit the air management system (fancy name for number of fan) of the enclosure. To do so I need to find a way to add a second fan but the only way to…
This is a remix of https://www.thingiverse.com/thing:1547126 Dial indicator case. It includes the modification for the harbor freight indicator and I added a modification to support the Amazon Exclusive 1" Brass Premium Dial Indicator. I…
I used this baseplate for my Gridfinity with the size of 5x10 for my 25cm trays and 9x10 for my 40cm tray, but any other should be fine as well! My fitter was printed with ASA and therefore warped. With PLA you may achieve different…
This is a remix of a 5015 fitted Satsana Remix
Based on Baleen from Land Shark Outfitters 4 Brackets needed for each drawer divider Other parts needed: 1x Aluminum plate: 17.8125" x 5.5" x 0.090" 8x #6 self drilling screws. 0.5" long.
This is designed to work with the TZe tape organizers from ICT Avatar's model here - Modular P-Touch TZe Tape/Cassette Holder organizer rack This is a simple shelf that attaches to standard US size pegboard but might work with different…
Manufacturer: Sukhoi Model: Su-17/20/22 NATO Reporting Name: Fitter A variable-sweep wing fighter made famous by the 1981 Gulf of Sidra Incident. This is not my model, and I do not mean to take credit for it. I am simply re-uploading it…
My brother was needing to add upfitter switches to a mid 90's Jeep Cherokee so i created this panel that replaces the lower area of the center of the dash with upfitter switches.
2 versions, one for the standard installation and one for a second spool in the right back or front left. The original spool holder arm just has to be mirrored to fit. Quickly made up in Tinkercad, feel free to modify yourself:…
Its a holder for magic wands, fitted to an older IKEA shelf. I know, thats not quite universal. But the required changes in thickness and hole distance are easy to make. The bottom part has two sides. The one with the center hole is for…
For 3D UpFitters Enclosure for the MK3S+. This is my first published designed with TinkerCad. The slotted hole had sharp edges and would rattle when the extruder would change positions so I designed this. This is my 5th version and…
A Gimbal protector fitted to the Qx7, I've lost a few and I thought it would be a good item to do while trying out a new cad program for the first time. The ones in the photos are not 3d printed but they are what this model is based on.
Its a holder for lightsabers, fitted to an older IKEA shelf. I know, thats not quite universal. But the required changes in thickness and hole distance are easy to make. The bottom holder is very sturdy and holds heavy sabers with…
I designed this shower caddy to fit most bath fitter showers with that utterly useless acrylic bar, it just slides over the bar and is held tight in place. Each shower is slightly different so this may be a tight fit or just slightly…
I was not happy with the door knob given with my 3dupfitters enclosure so I designed a new one. Is uses a M4x12 screw and the corresponding flat head given with the enclosure. Print instructions Rafts: No Supports: No Resolution: 0.2…
Some task from my wife to design fitted flower pot to her special flower stand. Simple and fast project - Satisfaction wife - prizeless: D
This is to attach the H2V2S mount to the MAD fan system.
An ESP32 Cam mount for the Prusa Mini. The mount fits on the X axis over the motor so as to move the camera in line with the layers as the printer prints. I designed this after finding other models didn't mesh with the modifications I had…
Each hole is 16.5mm across. I found that, on average, each Burt's Bees was 15.88mm to 16.35mm from a sample size of 40 tubes. Of these 40, there was one significantly greater at 17.33, With this information, this should fit the majority…
convert your chevy shift knob to from fitted to modular screw on. stick thread 16mm must be TPU
Kitchen Fitters 18mm Jig For cutting infills and panels, You can buy these at silly prices, why would you with a 3D printer! Printed mine in CF/PETG to last. 235'c 80'c 45mm support everywhere and cut it out once finished. Category: Tools
This is a simple form-fitted case for your Google TV device, I was tired of carrying it around in a mess of cables and decided to put an end to that. The model consists of three items: a top, a middle and a bottom part. The top and middle…
This model integrates three slots for 3×10×2 mm neodymium magnets, one in each corner, instead of the four magnets used in the original design. My goal was to use it in my 3D Upfitters enclosure with my recently upgraded MK3.5S. For that…
If you use one of the many filament clips that attach to Bambu spools, and want to use the spools on an Ender 3 (or other bed-slinger) printer, then this little adapter may be of use to you. I did not expect that the clip I have been…
I like to cover unused spots and when I saw @DaHouzKat's “Advanced Filtration System Adjustable Exhaust” I thought the mounting plate model would make a great cover or gasket. And it did!
This is a model i made long ago to replace a broken slider bracket on an integrated fitted fridge freezer door. I hope it's useful. I printed originally in PLA .4mm nozzle and was fine The posted image is in PLA .2mm nozzle Recommended…
2 of the 3 fingers of my lamp fitter had broken off. This was a quick fix to keep those fingers / tines in place. It uses the threaded aluminum ring to hold up this washer-like part which supports the broken tines. The ring of this lamp…
I just moved into a new apartment and it came with an ugly 3 ¼ inch fitter ceiling light that we aren't allowed to replace. I found an IKEA light that I liked that has a 3 inch threaded fitting and printed this adapter between the two…
Use these brackets to lineup desk table with my prusa mk3i+ 3D Upfitters Enclosure. Printed in PETG. 3 different thicknesses.
This is a bracket to hold the 3Dupfitters enclosure in place. It enables easy removal of the enclsoure without needing to unscrew anything. Simply lift the enclosure to remove it and place it back in the brackets to put it back in place.…
https://www.dropbox.com/scl/fi/2ww611knefv24lxs8k7zz/example-of-both-lids.mp4?rlkey=2d20vxtzsfbiueqn7opoq62fm&dl=0 The lid was too loose for my liking. When I pulled the toilet paper through the lid would come off so I tightened up the…
This is a 3D printable toy, the front wheels actuates the head and the back shaft can be configured to actuate the tail. it is possible to attach 4 N20 geared DC motors to the unit or two plane shafts can be used for the wheels. In my…
After looking through many dryboxes, I finally decided to mix and match models to create the perfect drybox for me! I chose models for the drybox where the parts can be found and bought on Indonesian online shop (Shopee). For the print…
Here you can print your own tiles for the game Tokan - Survival of the fittest. You need the game pieces in red and black; each color needs: 3x mice, 7x jackals, 5x lions. I did a layer change at 4.8 and 5.8 to print them in multicolor.…
Made this one as an afterthought for additional nozzle storage towards the rear of the shelf.
This switch mount replaces the original upfitter switch mount in 2020-2022 trim Ford Transit vans. This switch guard reduces the chances of accidentally activating one of the switches. Printing in PETG with supports everywhere is…
My printers are sitting on a paver (slab of concrete), which is itself on top of a bit of foam rubber. This substantially reduces the noise produced by vibrations that resonate in the table beneath the printer, but also lifts the printer…
This is a filter cover for the 80mm 3D-UPFITTERS Carbon Air Filter. This fits perfectly to the front of the 3D-UPFITTERS carbon air filter box and allows for color customization. Printed this cover with ASA but it can also be printed…
A parametric design tool which will allow one to design fitted boxes which may optionally have dividers. A system for generating a cut list and SVG files using lualatex and METAPOST is under development, see:…
I made a remix of the original to fit my printer. My building plate is 20x20x20 so I needed to split the large pieces. I split the holders of God and large guardian figures into individuals holders. Since I also have the Guardians set…
Simple mount for the Wyze cam 3 to mount inside the 3DUpfitters prusa mini enclosure. Uses the existing hardware included with the enclosure to mount the bracket. 3mm screw needed to attach the Wyze cam 3 to the mount.
I recently bought an "Aero Speed" brand jump rope from Buddy Lee but found fitting the length of the “rope” difficult, as it requires loosening two set screws and then cutting the rope shorter with wire cutters. So I made this small…
Print settings:1 Use PETG or ABS 2% 15% filling Object 3 0.2mm layer height If you enjoy appreciating it, please support and follow me The use of this model for commercial and other profit-making activities is prohibited and violators…
I made some custom wing servo covers for the 3dLabPrint Hawker Hurricane. These are most useful for the version of the plane for belly landings. Hopefully they will protect the aileron and servo horns. They are made in LWPLA but in a…
If your using the MMU with the 3Dupfitters MK3S+ enclosure, there is no need for the top slot opening. This is a simple cover for the slot.
I couldn't find the shelf I wanted to fit the top rail of my printer, so I designed this one using TinkerCAD . I dropped in the tube/inset sized to fit the glue sticks I use.
I designed this shelf to fit bath fitter showers with the useless acrylic rod in the front. This hangs on the 22mm acrylic rod and holds smaller shower items. You will need to print two of each part A and part B . You will also need to…
I made this to press fit close the snowball press instead of the other thing, (This might need to be put in a wrench for press fitting) Print Settings Printer Brand: Creality Printer: Ender 3 Pro Rafts: No Supports: No Resolution: 0,2…
When Cutting the hole in my custom printer housing I noticed my hole wasn't the cleanest circle, so I designed this to cover the imperfections and help direct air into the filter. This fits to the mounting of the 3D-UPFITTERS 80mm carbon…
If your not using the MMU with the 3Dupfitters MK3S+ enclosure, there is no need for the rear holes. This is a simple magnetic cover for the slot. It requires printing 2 pieces (included in the gcode). You need to glue in a 8mm x 3mm…
Helps children change gear easier. Secured with three stainless steel M3 bolts and heat set threaded inserts. Feel free to use the included FreeCad model to change to any other type of fastenings. Printed with the "lid" flipped with the…
This part is more of a temporary solution for myself and is meant more as an inspiration for an improved design. Installation is as follows: install manometer with the fixed capillary tube inside the machine route the capillary tube to…
Templates for sewing fitted face masks. Comes in three sizes. How-to videos for sewing: Print Settings Printer Brand: Prusa Printer: I3 MK3S **Rafts:** No Supports: No **Resolution:** 0.3mm Filament: Any PLA Category: Accessories
This mount allows one to attach a Raspberry Pi 4 to a 3D Upfitters 3d printer enclosure . This is a base only and is designed to be used with any of the tops based off Malolo’s snap fit design Attach the unit to your favorite corner using…
A palm-on-top shift knob for the Thrustmaster TH8S, shaped to the hand: an asymmetric dome tilted towards the palm and rolled towards the thumb, a thumb ledge, three fingertip scallops and a palm-heel swell, flowing into a flared stem…
Make a bookcase that fits your dollhouse perfectly. Set the size, choose your scale, and the generator builds it, with board thicknesses tuned to your nozzle so the small scales still print cleanly. Ready-made STLs Don’t want to…
a center cap for a marine steering wheel
What’s changed: 3x 18650 instead of 2x: The case has been enlarged so three 18650 cells without batteryholder fit inside, for significantly longer runtime off-grid. Adapted button: Due to the larger case, the original button no longer sat…
I had a "Time Machine" rolling ball clock for many years however the PCB board had too many issues and I didn't want to purchase a new clock. I bought a 1rpm clock motor and designed and 3D printed a bracket to hold the motor onto the…
With the Prusa XL enclosure from 3D Upfitters, there is no space to store the calibration pin on the side filament sensor. However, you can print this to store the calibration pin on the outside of the enclosure. This prints in place…
Helical Gear Shell LED Lamp Shade - 42mm E27 Fitter LED-only untested prototype. No incandescent or halogen. Not printed, fitted, heat-tested or load-tested. Use an existing certified shade-ring holder. Measure your hardware, keep plastic…
Bevel-Gear-Style LED Lamp Shade - nominal 42mm E27 fitter LED ONLY. Never use incandescent or halogen bulbs. Not printed, fit-tested, heat-tested or certified. Measure your existing holder, retaining ring, thread length and bulb clearance…
a prototype for a project of a simple 3d printed practice french horn kit which will be a simple less than 200 g print in which vinyl piping is fitting a 3d printed chunk valve and key mechanism in which just piping is fitted and strapped…
