Liczymy pasujące modele…
I wanted to recreate one of the toys from my childhood but designed it as a print-in-place model. I made two 3d printable versions where one is completely print-in-place and a version where you can snap-fit some colors onto it. -no…
Wydruk około 0,45 €–0,55 € nettoWstępna wycena jednego wariantu
Pre-Sliced the Temperature Tower starting with the Generic PETG Profile in PrusaSlicer and added the temperature changes accordingly. Included the .STL too, keep in mind when using it you need to add temperature changes by right clicking…
Wydruk około 0,78 €–0,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This model was originally designed by gaaZolee on Thingiverse. Here is a link to his original model with more information: https://www.thingiverse.com/thing:2729076
Wydruk około 1,53 €–1,87 € nettoWstępna wycena jednego wariantu
This is the gcode for a temperature tower for the original Prusa MK4 with Input Shaper firmware. 0.2mm SPEED stock profile 0.4mm nozzle verbose gcode on your printer must have input shaper firmware and enabled.
Wydruk około 1,11 €–1,35 € nettoWstępna wycena jednego wariantu
Schubladengriff, Türgriff im Hexagonaldesign. Schraubenlöcher 4mm mit Konus für Senkkopfholzschrauben aus dem Baumarkt. Ich verwende Schrauben wie auf dem Bild zu sehen. Gerdruckt auf MK4 0.2 Speed PLA Perimeter 3x Infill 30% Viel Spaß…
Wydruk około 1,25 €–1,53 € nettoWstępna wycena jednego wariantu
Pre-Sliced print Parts for MK3.9/MK4
Wydruk około 8,45 €–10,33 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This is for the FYSETC Portable Input Sensor (PIS) with RP2040 Chip that allows you to use a USB cable to connect an ADXL345 to your clipper host. Klipper has built-in support for the ADXL345 accelerometer, which can be used to measure…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Habe nach dem Update auf MK3.5 zum testen der Stock werte von Prusa mal eine PA test gemacht für PLA und 0.6 Nozzel. Im Prusa Slicer sind für PLA in allen Profilen 0.02 drinnen und bei PETG 0.025. Das ist schon sehr Pauschal. Bei ABS…
Wydruk około 0,07 €–0,08 € nettoWstępna wycena jednego wariantu
The 3mf file has the seams distributed a little bit to check their impact. My mini has severe under-extrusions in rounded corners after a long straight. Short straights are ok. Just print it and see if yours look nice. I added pauses to…
Wydruk około 0,51 €–0,63 € nettoWstępna wycena jednego wariantu
Profiles 0.2mm Speed and Gereric PLA are unmodified, just like they come from the slicer . PrusaSlicer Version ist shown in the pic section, as a screenshot. Greetings to the world !
Wydruk około 1,70 €–2,07 € nettoWstępna wycena jednego wariantu
I designed this model for my kids, who wanted a safe place for their personal treasures. This chest has a simple design that's easy to print. You can easily resize it with the provided source files to fit your needs.
Wydruk około 4,05 €–4,95 € nettoWstępna wycena dla PETGMateriał u źródła: PET
There are several great designs for cardholders or resource trays. Most of the time those are rather 'bulky'. With this design, I tried to come from a different angle. I created the trays in such a way that during storage/transport, they…
Wydruk około 0,30 €–0,37 € nettoWstępna wycena jednego wariantu
Kryt vytvořený podle reálných rozměrů pin pointeru, tato verze č.1 hladká bez břitu je pouze zkušební a už se pracuje na vylepšené zesílené verzi s břitem, tiskl jsem to z PLA materiálu a myslím, že PETG nebo jiné pevnější materiály budou…
Wydruk około 1,87 €–2,29 € nettoWstępna wycena jednego wariantu
This model is a simple but super satisfying upgrade for the printer: it covers the heatbed cable entry and, at the same time, works as a dedicated holder/guide for the accelerometer cable . The result is exactly what I wanted: the…
Wydruk około 0,61 €–0,75 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Parts: 1x M12x330mm Gewindestange (Zweierpack für 2,99€) 2x M12 Muttern (Viererpack 1,49€) 2x Korrosseriescheibe 13x37mm (2 = 0,47€) 2x Karrosseriescheibe 17x50mm (2 = 1,49€) Gesamt: 6,76€ The diy-steuersatz-werkzeug (Headset Bearing Cup…
Wydruk około 0,74 €–0,91 € nettoWstępna wycena dla PETGMateriał u źródła: PET
It snuggly fits to the feet of a Hercules Inpulse 500, even when you lift the deck, the feet stay on. You have to push them on at a slight angle, kind of counter-intuitive, but I promise they hold fine afterwards. Print it with any…
Wydruk około 4,23 €–5,17 € nettoWstępna wycena jednego wariantu
It's a simple Portable Input Shaper bracket for the Bear extruder. For the X axi, the bracket take place on top of the front fan. For the Y axi you can simply use paperclips.
Wydruk około 0,13 €–0,16 € nettoWstępna wycena jednego wariantu
Deutsche Beschreibung weiter unten. V2: EN: VERSION 2 IS HERE! FINALLY! I apologize for taking so long. I really don't know why I avoided it so much… Anyway, thank you for your patience and the numerous downloads :) V2 replaces the hole…
Made this remix for a friend who wanted a small resin printed helmet.
My PrintInPlace Peterbilt 359 is not suitable for the tight streets of Europe, so here is its short and agile European counterpart! The wheels spin and the engine compartment opens. This model prints all in one go and requires zero…
New junction box with 4 inputs. The old models had only three and two openings. Two openings are located on one side (see the pictures). This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features four inputs…
This is my first printinplace model for the Honeycomb Wall. I want a drillholder that is tilts forward so that I can see and grip the drills better. The drillholder is for drills from 1mm - 13mm with steps of 0.5mm. On top is a labeling…
This trailer can be connected to my lorry truck as well as the tractor-trailer (downloaded separately) and is compatible with all my existing and upcoming truck modules. That means you can turn it into a dumper trailer, boxed goods…
It is a decoration designed to decorate a cake. It's very simple. It is 14 cm high, 20 cm wide and 0,4 cm thick. Please refer to the printing instructions before printing. The model can be proportionally scaled up or down, but you need to…
The original Kobra 3 duct did not properly cool the front and rear of the models, causing failures when we have overhangs or very pronounced angles in these parts. This is my first iteration of the original duct. A front outlet was added,…
Note: Picture shows one size, but all 3 sizes from the original post have been adapted for countersunk holes and are included in the 3MF/STEP files. I love the strong and clever design of these hinges that @ESoderberg came up with,…
#### Update → STL-files #### Print parameters: Printer = Bambu Lab P1P Filament = Elegoo blue PLA 1,75 layer hight = 0.2mm Print temp = 210°C Wall loops = 2 Support = optional for the mountings
FLSUN V400 FYSETC Portable Input Shaper Mount A longer screw is needed to fix it.
Introduction This is the result of a week of slicing and testing to get a perfect calibration print for the Prusa MK4's Input Shaper. I had been having trouble terrible ringing and VFAs when using the Input Shaper on my MK4, so I tuned…
This is a 3d model I created and printed of Pomu Rainpuff from Nijisanji EN. The assembled model comes out to be about 20cm tall. https://twitter.com/Coal/status/1558974996688429056 The model has been split up into 30 different STLs,…
A lot of thought went into this redesign. Thank you akmiller01 for the original model. What's different? Out of the way: Narrower at the top so your trigger/bumper fingers have room to rest on the controller. Slim curve along the back so…
This profile is inspired by a large number of other high speed/bonkers profiles for the Mini and the Mk4. I tuned this for use with PETG, since that is mostly what I print in. But, I have tested it with some of the PLA filaments I have…
This is a WORK IN PROGRESS, I dont think this can be printed yet. WARNING! Update 1, separated the bow, pickaxe, arrow and radio. If you found this useful, please donate what you think it is worth to my paypal.me. Help cover the time of…
This is a water resistant compact enclosure designed for RAK Wireless baseboards (RAK19007 and RAK19003). Use it in your car, under your roof eave, or use it for quick deployment situations. ---------------------- Buy it pre-built and…
Technical information for all model files : Nozzle size: 0.4 mm, no Input shaper Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa MK4 Type of bed used for prototyping: Textured Notes : All…
This is a PrintInPlace way smaller modification of this model: https://www.prusaprinters.org/de/prints/49007-birth-machine-hr-giger Thx for sharing this in the first place to the David Warboss. I just wanted so have this in one piece in…
This removes the trouble of having to swap the hubs to use either the standing alone spool or the ace pro. It is oriented for kobra 3 max. In order to use it with kobra 3 or S1 Combo, you need to mirror it before printing.
New junction box with 3 inputs. The first model has only two. This new designed 8 by 8 by 5 cm junction box (for antenna and speaker cables) features three inputs and can be securely attached to a surface using up to four screws. Seals…
Klipper Gold Standard Model for testing INPUT SHAPER, including resonance compensation, ringing, ghosting, printer quality and general calibration. ::::PRINT SETTINGS:::: Suggested layer height: 0.2 mm. Infill: 0%. Top layers: 0. Use 1-2…
Print your box for tidying up your print place. The magnetic lid prevents accidental opening. A stackable version will come soon. V2 comes with proper champhers and an assembly version (only 3 parts; all to print) Print In Place Version…
Male and female buckles compatible with the belt strap buckles on a DLX Twinpeak backpack. Useful if you broke one, or need an extension strap to make it fit. They also work fine with any 1.5" webbing straps. Print the female part…
FLSUN Super Racer FYSETC Portable Input Shaper Mount. Needed: 2x M3x10mm Screws to fix Portable Input Shaper to the mount 1x M3x10mm Screw to fix support on Super Racer 1x M3 Nut to fix support on Super Racer Configuration for Klipper:…
Hi, I made brackets to test my Sovol SV06 Plus with Portable Input Shaper from FYSETC. This specific one is slightly easier to use - requires only USB-C and flashing firmware to it. There were no brackets available for SV06, so I decided…
I just wanted a way to make the input wires area a little more clean looking so I whipped this cap together. The screw holes are a bit undersized so I could drill and tap to fasten directly into the material. Print Settings 0.2 layer…
…Please be sure to hit like & post a make, I'd love to see your prints! Here's my over engineered Y Axis captive mount for the Fysetc Portable Input Shaper ADXL345 USB C Accelerometer bed mount. It's designed for ANY PRINTER with a PEI…
Caps to cover XLR inputs on various devices. I decided to create these after having to put gaf tape on the inputs to keep dust and snow out of the inputs on my Zoom H6 when being used in the field. These should fit any device with XLR…
This is a PSU cover for Prusa i3 MK3 (and MK3S) that has the power input on the back. I recommend that you completely remove the PSU from your printer (including all the wires!) before attempting to install this cover. I did it with all…
pinpointer Minelab PRO-FIND kryt pasuje samozrejme do drzaku
You want to feed your Vyper with filament through a bowden tube? With this new filament holder design, you can stick a bowden tube into the filament sensor input and feed your filament from a distance. Replaces the old tiny metal bracket.…
What you see is what you get. ☺ Data: - Spoon for measuring 30 g protein powder. _____________________________________________ Daten: - Löffel zum Messen von 30 g Proteinpulver.
I built this for for a 3D printed Stratocaster build by Toaster117. I bought a DIY Stratocaster kit from Bex Gears because I was going to use everything but the body, unfortunately, the input jack was too big to fit the build. Instead of…
A small test print that i use to evaluate the extruder accuracy and vibration of a printer. used for tuning extruder settings as well as input shaping / ringing compensation. it can also be used to test the quality of filament (for…
You can get the FYSETC Portable Input Shaper here: Aliexpress:…
X- and Y-axis mount for the portable input shaper. Y-axis mount should fit on bed with thickness of 4 mm. X-axis: depending on your fan: 2x 24 mm M3 bolts. Y-axis: 3x 16 mm M3, 2x 10 mm M3, 3x hex nuts M3, 2x M3 square nuts Print in PETG…
a nearly universal mount for a KUSBA accelerometer some times mounting the board hanging off the end is necessary for the usb cable to clear the umbilical note: the hole pattern is different to the adxl345 uses a screw to clamp to the…
Pleasant anti-stress keychain
Input shaping test print for markforged kinematics. Follows the movement correctly to isolate steppers.
Created to celebrate the 1 year anniversary of Nijisanji EN's LazuLight: https://twitter.com/Coal/status/1525349860857106435 I am very new to 3d printing, and this project is my first time creating models for 3d printing. For the print in…
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.2 mm (Quality) Materials used: PLA/PETG Printer used for prototyping: Prusa Core One Type of bed used for prototyping: Textured Notes : All printers have…
Bring some life to your desk with your new bowling pin buddy - Pinpal!! Can be coloured in Slicer or can be printed in a single colour
If you have Umbilical Mod, you probably saw you are not able to mount an input shaper where it's supposed to be attached. Worry not ! This mod will help you doing your input shaping on the Voron V0 ! There are 2 files here : a miniSB…
This is a simple remix of a remix - because I love heatset inserts. Credit to Anatoly Kharkov for the ingenious dual purpose clip/mount design: Fits both the X and Y axes for the Ender-3 V3 SE The clip is a nice secure fit on the bed Easy…
Fysetc Portable Input Shaper mounts for Elegoo Neptune 3 Pro/Plus/Max head and bed. Use M3 screws to secure the mount to the bed or the head.
🎃 Pumpkinpatch House – Whimsical Fall Fairy Cottage 🏡✨ Bring a sprinkle of magic to your autumn prints with this highly detailed Pumpkinpatch House – a cozy fairy home nestled inside a pumpkin! Many supports are needed. I used…
Mount for the KUSBA Input Shaper working with all Ender S1 Models. There are two mounts: One which is mounted on the extruder. You'll need to temporarily remove the M3x6 screw and use a M3x10. (see pictures) One which is mounted on the…
Resonance probe for input shaper calibration for the Klipper firmware based on a RP2040 Zero and a generic ADXL 345 Sensor SPI breakout board.. Wiring: RP2040 ADXL 345 GPIO 0 SDO GPIO 1 CS GPIO 2 SCL GPIO 3 SDA GND GND 3.3V VCC…
v400 fan shroud with a mount for the fysetc portable input shaper built in using original mounting screw plus 2 m3 bolts to mount the fysetc One version has the main mounting whole covered to cause bridging so it can be printed without…
This is the gcode for a PETG temperature tower for the Prusa MK4 with Input Shaper firmware Profile: 0.2mm SPEED (no changes) Nozzle: 0.4mm Filament: Generic PETG (no changes) The temperatures goes from 215 to 250
4 walls, 15% infill should work, the pusher does need supports, and you will need a small o-ring to go on the pusher head. the pusher goes in place of the standard breech, but the barrel assemblies have different assemblies as follows;…
This is a vertical DIN rail mount for MDT's amazing cookie-like KNX field devices. I'm using it with binary input modules but it is probably compatible with the rest. If not, I have uploaded the CAD file so you can alter the dimensions…
This sleek and contemporary design is the perfect choice for adorning any cake or refreshment table. Precision-made on the ORIGINAL PRUSA i3 MK3 - a top-tier 3D printer by renowned designer Josef Prusa, this standee ensures that your well…
A stylized representation inspired by the current President of China. Designed with a clean, respectful sculptural approach, this bust reflects the poise and presence of a modern world leader. Suitable for collectors of political figures…
Hi, I made brackets to test my Sovol SV06 Plus with standard ADXL345 chip, altered from my other PIS ADXL345 input shaper, so photos are visible there for now. All holes are measured for self tapping, no need for heated thread inserts.…
I suggest this being used not only for bed slingers, but also for any printhead. Just glue it somewhere…
instead of putting the input shaper in the front of the extruder, this one is attached to the supports legs that hold the magnet for the bed level sensor. makes it more esthetic. features: fit for - fysetc input shaper (support ears needs…
Removed money clip from the "UPDATED version" of Card Holder PrintInPlace with money clip
A 3D printed butterfly knife designed with no supports and printed in place is an innovative and practical tool for enthusiasts. This design allows the entire knife, including the pivoting handles and blade, to be printed as a single…
It's smaller version of original giants (look at photos). Print with PET-G.
Technical information for all model files : Nozzle size: 0.4 mm Layer height: 0.1 mm (Quality) Infill 15% No support needed Materials recommended: PLA Printer used for prototyping: Prusa XL Type of bed used for prototyping: smooth All…
As you know Prusa Mini finally got Input shaping (ALPHA). It works fine on some of the printers but others get an X Homing error. I Tried couple of things but adding C Clip to the x axis worked. Tightening the X axis belt also worked, but…
When testing printing with ACE Pro I found that the original extension from https://wiki.anycubic.com/en/fdm-3d-printer/kobra-3-max/8-input-and-1-output-module was not as stable as I was hoping for (without using e.g. metallic tube…
another mount for a ADXL345 accelerometer for input shaper. Mounts on the gantry bar using a screw to clamp down. Works with ender 3 and ender 3 pro please leave ⭐ review and rate. Buy me a some raman if i helped you out in anyway.…
This model is a functional dual-input adapter that acts as a central hub between your Creality Space Pi Plus filament dry box and your 3D printer. It is designed to take two separate PTFE tubes from the dry box and merge them into a…
Show off the Speed of your Mini+ unleashed! In September 2023 the Alpha PRUSA Mini+ Firmware 5.1.0-alpha including Input Shaper and other revolutionary features was released. Go flex with your new reacehorse ;) As always with high speed…
After setting up the Umbilical mod on my V0.2 Voron, i realized i don't have place for the PIS. The mounts that i found were all either fixed with screws, too small for the newer MiniSB, had the USB port on the wrong side, or were just…
Just before Word War II the Dutch Railways build a very modern concrete signal post at the west entrance of Utrecht Central Station (Leidseveer). This remarkable concrete structure, designed by achitect van Ravensteyn, was never…
Other models used heat set inserts and I did not like operating the soldering iron over my bed for something that is one time use and trash.
Compatible with FYSETC Portable Input Shaper. Print with flat surface to facing build plate.
Attached are two different mounts for two different accelerometers. One from Adafruit: https://www.adafruit.com/product/1231#technical-details One from HiLetGo (Amazon):…
New small junction box (only 45 by 80 by 50 mm) with 2 inputs. This junction box (for antenna and speaker cables) features two inputs and can be securely attached to a surface using up to four screws. Seals for both cable entries can be…
Benefits of this design: 1. ADXL components protected from shorting against mounting bolts' heads & nuts. 2. ADXL components protected by walls from shorting against filament knob. 3. ADXL securely sandwiched in place giving it a very…
This is a case I designed after watching Nero3DPs video on using a Pi Pico for input shaper. You will need 4x M2 self tapping screws to close up the case and then an acceptable wiring loom (an ethernet cable will work great).
…Please be sure to hit like & post a make, I'd love to see your prints! Mount Fysetc Portable Input Shaper USB C Accelerometer on your SV06/+ Use 2x M3 heat inserts & 2x M3 5mm bolts for the accelerometer & 8mm M3 bolts for attaching to…
PinPointer holder for Minelab Vanquish. I used a M5x40 countersunk screw and an M5 nut to connect the two parts around the detector rod. I glued felt to both inner parts of the sleeve to protect against scratching the rod and for better…
Slight change to the layout of the fan mount, to allow the use of the LDO Input shaper board. There are 2 versions: Display Port This version has access to the display port and the camera port, whilst still allowing the use of the LDO…
Qidi Plus4 has a single spot for the External Spool Holder. When you add the hub for the QBox, you lose the external mount. Many people have made an external double hub which lets you do both. I made a strong one, and added an arm that…
![Hercules DJ Contest: Encoders [Inpulse 200 series]](https://media.printables.com/media/prints/5dd45071-05e1-4b81-8aa7-844c735d2458/images/11216825_a46c87da-2549-455d-9d3d-93df4992d8fc_ae665a02-6464-453f-a84b-8e8dbb6220d3/photo-contest-retouche-2.jpg)
