P
PrintablesMatteo
Shroodha
design by @idontknow mang | https://www.thingiverse.com/thing:4688278 no need for support just believe in lord shrek
- Pobrania
- 1412
- Polubienia
- 169
- Ocena
- 5
Wyniki wyszukiwania: rood
109 modeli
P
PrintablesRabid Badger
Filament Sensor Bracket for Troodon 2.0
This bracket attaches the filament sensor on the Troodon 2.0 to the frame. I didn't like having it free-floating. It also provides a secure attachment point for the reverse bowden tube. Added a version for M10 pneumatic fittings per…
- Pobrania
- 222
- Polubienia
- 33
- Ocena
- 5
P
PrintablesPixelChroniclesMiniatures
Pokemon inspired, Shroodle, Tabletop DnD miniature
IF YOU LIKE THIS MODEL, CHECK OUT MY OTHER MODELS AND SUPPORT MY PAGE Patreon at https://www.patreon.com/pixelchronicles ! Pokemon inspired, Shroodle, Tabletop DnD miniature 20 mm medium base which can be used for DnD and other Tabletops.
- Pobrania
- 140
- Polubienia
- 18
- Ocena
- 0
P
PrintablesRoland Goller
Single Fan Extension for Nevermore Voron - Troodon
Single Fan Extension for Nevermore, based on The Filter Single Fan
- Pobrania
- 127
- Polubienia
- 43
- Ocena
- 5
P
Printablesandrewkona
Trough feeder for chick brooder
I needed an additional area for our chicks to feed so I drew up this simple trough. Edges are rounded which may be safer for the birds, but a coupe of them like to walk around on or in it. No issues with this as of writing this. I place…
- Pobrania
- 126
- Polubienia
- 30
- Ocena
- 0
P
PrintablesMelissa Bent
Producer's Pride Brooder Plate Replacement Legs
I have lost the legs for my Producer's Pride brooder plate for my chickens. My first iteration of this model didn't have tapers on the prongs that are inserted into the brooder plate. This make them nearly impossible to use. This version…
- Pobrania
- 125
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSven Anteunis
"Bread & Beer" / "Brood & Bier" insert (999 games)
This is an insert for the game "Bread & Beer" or in Dutch "Brood & Bier". The version I have is that of the game publisher "999 GAMES". I do not know if there are differences in other language versions ("Deep Print Games"). I did not find…
- Pobrania
- 120
- Polubienia
- 14
- Ocena
- 5
P
PrintablesDragonArtist15
Weirdbirds Troodontid
1:18 scale model of the troodontid from the “Weird Birds” web series. This was made in collaboration with Archesuchus. The model measures 10" long from snout to tip of tail. The model features detailed scale and feather texturing along…
- Pobrania
- 113
- Polubienia
- 24
- Ocena
- 0
P
PrintablesA4O Labs
Brooding Bunny
Add a bunny with a bit of attitude to your space. Another sculpture scan. Prints without supports. Enjoy! As always, sharing your prints/makes is always appreciated.
- Pobrania
- 111
- Polubienia
- 20
- Ocena
- 5
P
PrintablesRabid Badger
Troodon 2.0 Lift-Off Door Hinges
These use the pin from the original hinges. Press it out of the old hinge and then use a soldering iron to sink the pin in the frame side of the hinge. Mounts with the original screws and spacers.
- Pobrania
- 98
- Polubienia
- 12
- Ocena
- 0
P
PrintablesMerdoc
Troodon 2.0 Filament Sensor Bracket Remix
I took the design from @RabidBadger_397944 and modified, so that I can add a PTFE coupler to the Front of the Sensor. That way I could mount a side mount spool holder and have it guided into the sensor from a 90 deg angle. I also opened…
- Pobrania
- 90
- Polubienia
- 5
- Ocena
- 0
P
Printablesseth the yutyrannus
troodon
the troodon has a very large brain because it is the smartest dinosaur
- Pobrania
- 89
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDave Aldrich
Neopixel Holder for Troodon 3D Printer
Consider supporting my work on Patreon: https://www.patreon.com/c/Designbydave A simple mount to add Neopixel RGB LEDs to the top of your Troodon 350mm 3D Printer. Just slide the LED strip into the slots in the holder. Mounts to the top…
- Pobrania
- 85
- Polubienia
- 14
- Ocena
- 4,75
P
Printablesspectre3ooo
Troodon 2.0 Touch Screen Housing for BTT Pi TFT50 V2.0
Modified housing to include mounting holes for Troodon 2.0 front panel. Attach mount to printer first. The top screw holes for the screen are accessible through the hexagonal holes in the skirt.
- Pobrania
- 75
- Polubienia
- 10
- Ocena
- 0
P
PrintablesRabid Badger
Troodon 2.0 Rocker Feet
These make accessing the electronics of the Troodon 2.0 much easier. Required hardware: 4x M4x10mm socket head cap screw 6x M4x16mm socket head cap screw 10x M4 spring-loaded t-nuts for 20x20 extrusion Installation steps: Remove the trim…
- Pobrania
- 75
- Polubienia
- 5
- Ocena
- 5
P
PrintablesSlade Wexo
Troodon v2 PG7 adapter mount
PG7 adapter motor mount side for the Troodon v2 3D Printer. The version in the pictures was printed in PETG on Bambulab X1 Carbon using the “0.20mm Standard” preset on a “Textured PEI".
- Pobrania
- 72
- Polubienia
- 6
- Ocena
- 5
P
Printablesspectre3ooo
Troodon 2.0 Removable 270° Hinges
The stock hinges on the Troodon 2.0 only allow the doors to swing 180°. These hinges allow you to fold the doors back against the sides of the printer and out of the way. They're also designed to be easily removable without tools. There…
- Pobrania
- 70
- Polubienia
- 5
- Ocena
- 5
P
PrintablesJason H
Troodon 2.0 2020 top rails
Troodon 2.0 2020 extrusion top rails for mounting anything to the top of the enclosure. Such as enraged rabbit or a spool holder etc. You'll need 4x400mm 2020 extrusions, and tap the ends for M6. Add some t-nuts and you are good to go.…
- Pobrania
- 68
- Polubienia
- 16
- Ocena
- 5
P
Printablescray12399
Troodon 2.0 Nozzle Brush Bucket
Bucket to catch purged filament from nozzle cleaning brush. You'll need 2 m3 heat inserts and 2 m3x20 screws.
- Pobrania
- 66
- Polubienia
- 7
- Ocena
- 5
P
Printablescray12399
Troodon 2.0 Z-Belt Covers
Just print them out and slap them into place. No additional hardware needed. UPADATE: Increased the hole spacing to give the belts more wiggle room. Added a cover with cable routing in case you're crazy like me and route cables through…
- Pobrania
- 62
- Polubienia
- 4
- Ocena
- 0
P
PrintablesRhize
BTT HDMI5 Mount for Troodon 2.0
Original model was very complete with multiple mount options all in 1 step file. I've removed some of the options to streamline down to 3 needed components - the mount and a 2 part screen frame. The USB-C port hole has been moved to…
- Pobrania
- 61
- Polubienia
- 6
- Ocena
- 0
P
Printablescray12399
Beefy Idlers for Troodon 2.0
The stock front idlers for the Troodon 2.0 are functional, but lacking in performance, usability, and appearance in my opinion. So, I decided to remix the famous Beefy Idlers for Voron 2.4 printers that was created by Clee. I used Tetsu's…
- Pobrania
- 61
- Polubienia
- 11
- Ocena
- 5
P
PrintablesDan Rogers
Filament runout sensor mount for Troodon 2.0 Pro - 3 different versions
I wanted to use my printer the day I set it up, and the printer did NOT ship with a filament runout sensor mount. Found one on printables, but it needed an added pneumatic adapter which I didn't have - so I remodeled it to just hold the…
- Pobrania
- 60
- Polubienia
- 6
- Ocena
- 4
P
PrintablesResin Quest Miniatures
Velthara, Queen of the Moonveil Brood | 32mm & 75mm Fantasy Miniature | FDM & Resin
Deep beneath the towers and moonlit halls of the Moonveil lies a sanctuary even the Dark Elves approach with reverence. There waits Velthara, Queen of the Moonveil Brood . Once among the most powerful high priestesses of the Moonveil,…
- Pobrania
- 59
- Polubienia
- 11
- Ocena
- 0
P
PrintablesStormCrow 13
Phyrexian Broodings
MtG's Classic villains are perfect for Halloween. Happy Spooky Season If you want to help me keep making free models or want to tell me what I should make next please check out my Patreon Category: Games
- Pobrania
- 59
- Polubienia
- 18
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 CANBUS Exhaust
Modified exhaust filter door and inner chamber exhaust support for CANBUS. You will need x2 M3x10mm screws.
- Pobrania
- 57
- Polubienia
- 6
- Ocena
- 5
P
Printablesogre56
Troodon 2 A/B belt clamp
Had to change to a StealthBurner and the Voron belt clamps will not fit the Troodon 2 printer so made this simple model by copying this one by pungo120 https://www.printables.com/model/479348-voron-ab-belt-installation-helper-clamp You…
- Pobrania
- 55
- Polubienia
- 2
- Ocena
- 0
P
PrintablesPhillip Rivas
Troodon 2.0 Pro Front Door Magnets (The Filter / Nevermore compatible)
Update: Fixed some dimensions and added chamfers on the lower magnet bar for style. V1 is still in the files if you like it better without those changes. These are magnet holders to replace the stock front door magnets on the Troodon 2.0…
- Pobrania
- 55
- Polubienia
- 6
- Ocena
- 0
P
Printablescray12399
Troodon 2.0 Motor Mount Covers
Everyone knows that accessory mods add around 1 mm/s/s of top acceleration each. (Prove me wrong) So, I decided to make these motor mount covers for the Troodon 2.0, for speed purposes. These covers require no additional hardware and…
- Pobrania
- 54
- Polubienia
- 6
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 Pro OEM Screen Frame and Mount
STL of Troodon 2.0 Pro OEM Screen Frame and Mount
- Pobrania
- 53
- Polubienia
- 4
- Ocena
- 5
P
PrintablesAnthon-VK
Troodon 2.0 PRO Filament corner guide
A filament guide to use with a side mounted spool holder on the troodon 2.0 PRO.
- Pobrania
- 52
- Polubienia
- 4
- Ocena
- 0
P
PrintablesPhillip Rivas
BTT HDMI5 1.2 Mount for Troodon 2.0 Pro
Mounts to the front of the printer where the original magnetic bracket goes. The screen that came with my printer suddenly died one day (likely due to the strong magnets placed directly behind it) and Formbot sent me the updated model as…
- Pobrania
- 51
- Polubienia
- 4
- Ocena
- 0
P
PrintablesTankanickel
Troodon 2.0 PG7 (M12x1.5) Motor Mount
I switched to a toolboard on my troodon 2.0, hence I needed an adapter plate for my motor mount because of the new cable. This adapter board screws in on top of the motor mount on the top right. You need M3x32 screws instead of the old…
- Pobrania
- 50
- Polubienia
- 7
- Ocena
- 0
P
PrintablesPhil
BTT HDMI5 Mount Troodon 2.0
Quickly edited the mount to fit the Troodon 2.0. Chopped off the top part the goes into the extrusion and added a bar in the middle to handle the 2xM3 screws that go into the frame. Use screen housing from Voron 2.4 mount. It's a bit…
- Pobrania
- 50
- Polubienia
- 3
- Ocena
- 0
P
PrintablesIceaac
Troodon 2.0 270° hinge
Here is a hinge for the Troodon 2.0 which can be opened 270 degrees. The same screws and slot nuts are used as for the factory hinges Category: 3D Printer Parts
- Pobrania
- 46
- Polubienia
- 9
- Ocena
- 5
P
PrintablesJoseph Ecker
Troodon 2.0 Pro 350 - Side-mounted spool holder/PTFE guide
Tired of the stock back-mounted spool holder? Here is my ad-hoc solution. Both the spool holder and PTFE guide are mounted using the existing side/back panel screws. No additional hardware needed. The spool holder has a recess that allows…
- Pobrania
- 42
- Polubienia
- 6
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 Pro Filametrix Depressor
Requires x3 M3x40 screws, x1 M3x6, x1 M3 heat set insert. The best blades I have found, they have lasted thousands of cuts so far:…
- Pobrania
- 39
- Polubienia
- 8
- Ocena
- 0
P
PrintablesRoland Goller
Troodon 2.0 Pro Z-Belt Cover Protection
Troodon 2.0 Pro Z-Belt Protection snap in design Update V2 is Online If you like my model, I would be happy about a Like
- Pobrania
- 38
- Polubienia
- 6
- Ocena
- 5
P
Printablesgeorgmierau
Pet Brooder compatible divider
As requested by a Reddit user. A prototype of a divider for Pet Brooder. Work in progress!
- Pobrania
- 38
- Polubienia
- 2
- Ocena
- 5
P
PrintablesDrexDamen
Troodon 7" display mount
Since I upgraded the Firmware of my Troodon to Klipper the original display would not work correctly anymore. Since I had a 7" raspberry pi touch screen lying around a decided to switch to KlipperScreen and build this adapter. The adapter…
- Pobrania
- 37
- Polubienia
- 5
- Ocena
- 0
P
PrintablesMZ4250
Broodiken
Want to access even more models not found here ? Interested in supporting my efforts making free models for the world to enjoy? Check out my patreon page here: https://www.patreon.com/mz4250 or support me on Printables Clubs! Patrons have…
- Pobrania
- 37
- Polubienia
- 7
- Ocena
- 0
P
PrintablesLatenivenatrix Mcmasterae
Jurassic World Evolution Troodon model (unposed)
NOT MINE (obviously) There wasn't enough troodontids on this sight. The original upload of this model on sketchfab was lower poly so I simply made it higher poly and printable Troodon by Frontier Developments
- Pobrania
- 36
- Polubienia
- 2
- Ocena
- 0
P
PrintablesViper
Vhorlath Realms – Dark Elf – Vorthak Broodfang (Dark Fantasy 3D Printable Miniature STL)
Vhorlath Realms – Season II: Shadowed Empires Dark Elf Vorthak Broodfang 3D printable STL miniature for dark fantasy tabletop RPGs, miniature painting, collecting, display, and wargaming armies . The Vorthak Broodfang is a monstrous…
- Pobrania
- 35
- Polubienia
- 4
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 Pro 350mm Canopy
40mm Canopy that allows for more Z height clearance. x12 45mm M3 screws are required. I also foam taped the top, bottom, and seams of each piece. Printed in ASA. Print 4 of any of the STL's to make the entire canopy.
- Pobrania
- 35
- Polubienia
- 3
- Ocena
- 0
P
PrintablesLWNR Prints
Troodon 2.0 Z-Belt Covers
Belt covers for the Troodon 2.0 to keep dirt / dust and other debris from falling in to the wide hole that is left near the belts. It can cause problems if a blob of filament falls in and gets stuck in the belt path, so this model solves…
- Pobrania
- 33
- Polubienia
- 0
- Ocena
- 0
P
PrintablesThe Eightpints
Brood Matron Z'Thra - The Eightpints K'Tharr Symbiotes
You’ll know Z’thra by the humming. It isn’t a song; it’s the sound of a thousand hungry mouths vibrating in unison. She’s more parasite than person now, a withered husk held upright by the massive "Queen Grub" fused to her spine. When she…
- Pobrania
- 33
- Polubienia
- 4
- Ocena
- 0
P
PrintablesStormCrow 13
Broodstar
Myrddin is weird. Giant Cybernetically enhanced flying eels live there in addition to the schools of regularly sized {Sky-Eels]( https://scryfall.com/card/som/44/sky-eel-school ). At least by the second time WoTC decided to set a block…
- Pobrania
- 32
- Polubienia
- 10
- Ocena
- 0
P
PrintablesVince Formosa
Troodon 2.0 HDMI5 Screen Mount
Screen Mount for the Troodon 2.0 for a Biqu/BigTreeTech HDMI 5 Touchscreen. 20deg Tilt
- Pobrania
- 32
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRastermann
Vivedino Troodon 2.0 Zugentlastung
Zugentlastung für den Troodon 2.0 Gedruckt in ASA von Filamentum
- Pobrania
- 31
- Polubienia
- 4
- Ocena
- 0
P
PrintablesSchlossbauer
Gibberling Brood Mother
A Gibberling Brood Mother. You can go to https://www.patreon.com/Schlossbauer if you want earlier access our to sell my work. Category: Toys & Games
- Pobrania
- 27
- Polubienia
- 4
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 Pro 350mm OEM Grill
OEM Grill that you can print in any color you want, you will have to print 2 of each side sections.
- Pobrania
- 27
- Polubienia
- 2
- Ocena
- 5
P
PrintablesKneeFangPee
Chicken Brooder Heatplate Pyramid (Poop) Guard. 10"x10"
This is a Pyramid Poop Guard for Brooder Heatplate. Idea is to reduce or eliminate your chicks ability to poop on top of the plate. Heatplate purchased from Amazon and does not come with any poop protection…
- Pobrania
- 25
- Polubienia
- 13
- Ocena
- 0
P
PrintablesAnthon-VK
Troodon 2.0 PRO Right Motor mount cover remix
A remix of the right motor mount cover to make clearence for the cable.
- Pobrania
- 25
- Polubienia
- 3
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 Pro 350MM Slide Off Panel Mod
Rails that the panel slides into, so you don't have to take off all the screws. Side Panels: Use M3x6 to attach the rails and M3x12 for the top center screw that retains the panel. Botton Panel: Reuses all but one of the stock panel…
- Pobrania
- 24
- Polubienia
- 5
- Ocena
- 0
P
PrintablesDan Rogers
PTFE guide for right side mount for Troodon/Voron 2.4 supports collet clip
If you are right-side back mounting a filament holder you need a way to feed filament into the printer. A reverse bowden setup is typical. I downloaded the one that I remixed, and it did not grip the PTFE tube but left it loosely hanging.…
- Pobrania
- 24
- Polubienia
- 2
- Ocena
- 0
P
Printablescray12399
Quad Bed Fan Cover for Troodon 2.0
Read: summary You will need 4x 6x3 magnets and some glue for this mod. Print 2 of each vent in your chosen infill pattern with no top or bottom layers, then glue to the main body. Attaches with the two screws on the front of the Troodon's…
- Pobrania
- 24
- Polubienia
- 6
- Ocena
- 0
P
PrintablesDrexDamen
Troodon Raspi Mount
This is a replacement PanelDue mount for the Formbot/Vivedino Troodon with a secondary mount for a RaspberryPi (i.e. for Klipper or Octoprint etc.) I added the FreeCAD file in case you want to modify it. My Troodon is the latest model as…
- Pobrania
- 23
- Polubienia
- 1
- Ocena
- 0
P
PrintablesLepresean
Troodon grill BTT Knomi v1/v2 mount *Beta*
Currently a beta
- Pobrania
- 23
- Polubienia
- 4
- Ocena
- 5
P
PrintablesTVHS
Lid riser block / Canopy for Troodon 2.0 Pro 350mm printer
In order to reach the full 330mm height capacity claimed by Troodon the 2.0 Pro needs some spacer blocks to rise the lid so that the bowden tube doesn't get bent up against it. I've designed these blocks to do the job while using not too…
- Pobrania
- 21
- Polubienia
- 8
- Ocena
- 5
P
PrintablesPhillip Rivas
Troodon 2.0 Pro - 7.5mm Breakout Board / Z-Chain Reducer
I have not used this or tested it myself - this is just an idea that I came up with. Use at your own discretion for your own needs! The connectors on the breakout board occupy most of the available space in the cutout located underneath…
- Pobrania
- 21
- Polubienia
- 4
- Ocena
- 5
P
PrintablesKiwirob
Filament Sensor Bracket for Troodon 2.0 - M10 Connector
Rabid Badger did the original design work on this and I just hacked on a M10 coupling because that is the type of connector I had available. This bracket attaches the filament sensor on the Troodon 2.0 to the frame. I didn't like having…
- Pobrania
- 21
- Polubienia
- 1
- Ocena
- 0
P
PrintablesKiRKY
Troodon 2 filament sensor bracket
I didn't like the fan placement or the spool holder on the Troodon 2 pro. My printer takes up the entire width of my desk and wouldn't have ease of access to change spools. So i changed the location of the fan a made a filament runout…
- Pobrania
- 21
- Polubienia
- 3
- Ocena
- 0
P
PrintablesPhillip Rivas
Troodon 2.0 Pro Printed XY Joint Lowers
Print with 10 walls and 90-95% infill for maximum strength. Highly recommend to print these slow and hot . ASA is fine, but I'd recommend ASA-GF or CF if you can. These are printed lowers for the XY joints that replace the stock metal…
- Pobrania
- 20
- Polubienia
- 3
- Ocena
- 0
P
PrintablesRoland Goller
HULA Anti Vibration Feet For Troodon 2.0 Pro
This is a simple adapter to use the HULA feet with the Troodon 2.0 Pro https://github.com/thrutheframe/HULA_Voron/
- Pobrania
- 20
- Polubienia
- 2
- Ocena
- 0
P
PrintableslRaven C,O,F,
sleeping crood
you should add supports and watch rhymes with grug
- Pobrania
- 19
- Polubienia
- 5
- Ocena
- 0
P
PrintablesUntoldLegacy
Test Tube Brood Insert 20mm for Ants
A brood insert for 20mm test tubes! Good for some ants that don't care for climbing on glass, the grid pattern on the back of the insert presses against the cotton on your water chamber. It's similar to the inserts sold by some companies…
- Pobrania
- 19
- Polubienia
- 2
- Ocena
- 0
P
PrintablesDan Rogers
Z belt debris guards - Voron 2.4, Troodon 2 Pro, etc.
A super simple print for putting a tiny wall around the Z belt openings on a Voron 2.4 or Troodon 2 Pro style printer. Print 4 of them. They block bits and bobs from falling into the pulley hole. You can glue them, or you can leave them…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesPio Sulmoni
Troodon v1 5Inch Touchscreen holder for klipperscreen
i designed a own screen holder for a waveshare like 5inch touchscreen. in my case this was an dfrobot screen. it is a drop in replacement of the original duet like tft holder i printed it like it lays in the model with Brim and Supports.…
- Pobrania
- 18
- Polubienia
- 1
- Ocena
- 0
P
PrintablesFlorent Baron
Boitier pour capteur Broodminder
Boitier réalisé en PLA pour recevoir les capteurs broodminder. Le bouton peut être actionné et la led est visible par transparence.
- Pobrania
- 18
- Polubienia
- 2
- Ocena
- 0
P
PrintablesRoland Goller
Troodon 2 Pro Rear Cables Cover
hide the cables at the back of my troodon 2 pro printer, with feedthrough and holder for a thermistor If you like my model, I would be happy about a Like
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 Pro Custom Skirts
Print with: 0 tops layers 0 bottoms layers Whatever infill and percentage you want-that is what creates the design. Use 2 M3 heat set inserts for the screen magnets Place face down with supports only for the screw holes The large middle…
- Pobrania
- 17
- Polubienia
- 2
- Ocena
- 0
P
Printablescray12399
Troodon 2.0 Rigid Z Mounts
Ridid Z mounts for the Troodon 2.0. Decreases Z bleed in resonances.
- Pobrania
- 17
- Polubienia
- 3
- Ocena
- 0
P
PrintablesFootballFan141
Brinsea Chicken Brooder Leg
The 3D printed leg is the one in the front right of the first picture. I tried to model it exactly the same as the original. Hope this helps someone! I printed it in PETG on the Kobra S1. I believe this is the one that my brother has…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSki3d
Cartographer3D Mount from Troodon V1 Eddy current sensor
For a troodon V1, Mounts on the mgn9 carriage spot, on the bottom. using a Cartographer3D low profile sensor. Im have a mosquito hotend so you may need to adjust. with nozzle touching the bed, it needs to be 3mm way from the bed . v1.1…
- Pobrania
- 16
- Polubienia
- 1
- Ocena
- 0
P
PrintablesRoland Goller
Troodon 2.0 Rocker Feet for use with the HULA Feet
Troodon 2.0 Rocker Feet for use with the HULA Feet Adapter https://www.printables.com/model/1139697-hula-anti-vibration-feet-fo
- Pobrania
- 14
- Polubienia
- 3
- Ocena
- 0
P
PrintablesMatthew Frey
Chick Brooder Wire Fence Clip
My chicken babies are just about feathered out and starting to learn to escape their brooder before they're ready to move to the coop, so I made this quick and dirty little clip to mount to the walls of their brooder box and keep them in.…
- Pobrania
- 14
- Polubienia
- 1
- Ocena
- 0
P
PrintablesAtanas Neykov
Troodon Cable Chain Mount for Galileo 2.0 Extruder
Hello all, I made modification, a remix of the bracket that holds the Troodon 2.0 cable drag chain with the original PCB board on it for the XOL print head with Orbiter 2.0 extruder ( in reality the Galileo 2 Standalone (G2SA) and it is…
- Pobrania
- 13
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSeth Wahle
Brooder light bar adapter
This small piece mates a piece of “blackpipe” from the hardware store to the top of a 100gal stock tank. This is a very common method of suspending a heat lamp so the tank can be used as a brooder. The benefit of this item is that with…
- Pobrania
- 13
- Polubienia
- 4
- Ocena
- 0
P
PrintablesMarkus
Troodon 2.0 SD Card Extension Clip
For those who want easy access to the firmware with an sd-card extension cable. Quick print, it took me around 10 min @ 0.2mm, 3perimeters (as most walls are 1.2mm). print upwards for fracture resistance of tiny back clip; built-in…
- Pobrania
- 13
- Polubienia
- 0
- Ocena
- 0
P
PrintablesHopelessGenXer
Troodon 2.0 Pro Mini Klicky Probe Dock Mount
A remix of jlas1's fixed mount for the Klicky Probe to fit the Troodon 2.0 Pro Mini.
- Pobrania
- 12
- Polubienia
- 0
- Ocena
- 0
P
Printablesdavidtaxer
Troodon V1 HDMI 5 screen mount
Remixed for BTT HDMI 5 v1.2 screen for Vivedino Troodon V1
- Pobrania
- 12
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDan Rogers
Replacement magnetic mount cradle for BTT 5-inch, v1.2 display for Troodon 2.0 Pro
The Big Tree Tech 5-inch displays that come with Troodon 2.0 Pro get wonked. They say it's because of strong magnetic fields. Either way, when they get wonked, you can't buy a replacement. What you can buy is a BTT 5-inch V1.2 display.…
- Pobrania
- 11
- Polubienia
- 1
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 Pro Badge Retractor Mount
Install the heatset insert in the hole of the mount. Thread the longer screw through a side or top panel while holding the mount on the opposite side of the hole inside the chamber of the printer.
- Pobrania
- 10
- Polubienia
- 2
- Ocena
- 0
P
PrintablesChase
Troodon 2.0 Pro Tradrack top mount
Mounts the Tradrack on top of the troodon using the oem panel holes.
- Pobrania
- 9
- Polubienia
- 3
- Ocena
- 0
P
PrintablesAtanas Neykov
Umbilical PUG Mount for Troodon 2.0 PRO - Z gantry
Hello, I made a remix of https://www.printables.com/model/693029-troodon-v2-pg7-adapter-mount Troodon v2 PG7 adapter to be able to put the PUG https://www.printables.com/model/378567-pug-parametric-umbilical-gland All this is to be able…
- Pobrania
- 8
- Polubienia
- 1
- Ocena
- 0
P
PrintablesBluefrogman
30cm Brooder Plate Cover
A simple template for Titan 30cm x 30cm (20w) brooder heat plates. My guess is this will fit all 30cm heat plates. Simply print out, then follow the terrible photo instructions provided. This saves so much time cleaning the poop from the…
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printablesteslabolt
Producer's Pride Brooder Plate Replacement Legs
Replacement legs for the Producer's Pride brooder plate in upright orientation. Printed in PLA, but PETG or ASA might be necessary depending on environment for heat resistance.
- Pobrania
- 5
- Polubienia
- 0
- Ocena
- 0
P
Printables3wasAl
Din Rail mount for the troodon 2
You need to print 2 parts follow the pictures for assembly require 2x M3x10
- Pobrania
- 5
- Polubienia
- 1
- Ocena
- 0
P
PrintablesDBT85
Langstroth brood frame cage
I needed a frame cage to keep a queen bee out of a particular frame so that it could be removed, without the queen having laid it up and the workers subsequently wasting energy tending to the larvae, and so the frame cage was created. It…
- Pobrania
- 4
- Polubienia
- 1
- Ocena
- 0
P
PrintablesOdjowo
Z ilder for Troodon v2.0 Extrusion profil 2020 Mod
I printer this with ASA 40% infil, and same settings to a voron print This mod it s for some one need to search a model for Z pullet tensionner with the original hardware on the troodon but !!! exclusivement if you upgrade your Troodon on…
- Pobrania
- 3
- Polubienia
- 0
- Ocena
- 0
P
PrintablesDan Rogers
Creality Spool arm to Voron Frame adapter - Troodon 2.0 Pro
Simple spool holder adapter for old Creality spool holder (the one with the twist bayonet) to mount on a Troodon 2.0 Pro or a Voron 20mm vertical frame extrusion. Mounts with standard M5 hex head to the T-Nut that is captive inside of the…
- Pobrania
- 2
- Polubienia
- 0
- Ocena
- 0
P
PrintablesThoren66
The Game of Rood
ROOD The Board Game (Based on the ancient game called '5 Lines') Fun Fact: ‘Rood’ is an older English ecclesiastical term for the cross Objective: (Winning the Game) Be the First Player to end their turn with all 4 of their coloured PEGs…
- Pobrania
- 1
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSJ
Troodon 2.0 4.3" Display Mount Bracket
I have remixed two models, but since I could not select an appropriate license, I am posting them separately. https://www.printables.com/model/1819506-troodon-20-43-display-mount-screen-case
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
PrintablesSJ
Troodon 2.0 4.3" Display Mount Screen Case
I have remixed two models, but since I could not select an appropriate license, I am posting them separately. https://www.printables.com/model/1819503-troodon-20-43-display-mount-bracket
- Pobrania
- 0
- Polubienia
- 1
- Ocena
- 0
P
PrintablesSJ
WIP) Troodon 2.0 Nebula Camera Z Mount
i couldn't think of a way to solve the wiring interference, so i throw a way the project.
- Pobrania
- 0
- Polubienia
- 0
- Ocena
- 0
P
Printables
30cm Brooder Plate Cover
A simple template for Titan 30cm x 30cm (20w) brooder heat plates. My guess is this will fit all 30cm heat plates. Simply print out, then follow the terrible photo instructions provided. This saves so much time cleaning the poop from the…
P
Printables
Brood Matron Z'Thra - The Eightpints K'Tharr Symbiotes
You’ll know Z’thra by the humming. It isn’t a song; it’s the sound of a thousand hungry mouths vibrating in unison. She’s more parasite than person now, a withered husk held upright by the massive "Queen Grub" fused to her spine. When she…