Liczymy pasujące modele…
One for every kind. Simple and fast to print. Just attach it through one of the wheels as shown in the picture. This is a very quick and easy print and a great way to use up the last meters of your filament. If you are looking for a…
STLs All files are in correct Z orientation Main (Use one of the following) + main.stl (for ~22.5mm handlebar) + main-short.stl (shorter stem) + main-32mm.stl (for ~32mm handlebar) * jaw.stl * screw.stl Clip (Use one of the following) +…
I created a scooter stand for the kids scooters so they were always upright and not lying all over the yard when not in use. Mine have been in use for a few years now and they work well. The stand just sits on the floor, but you could…
Give it a “like” and a download, so I can get those sweet sweet Prusameters :) --- This is a simple and effective wall hook for hanging skateboards or scooters on the wall, such as in a garage. I printed a few, and realized I could also…
Print the parts separately. Some parts need to be glued together. Two steel office pins are needed. To enlarge the holes, heat the pin over something warm (candle, flame,...). Print at 0.15mm layer height using PETG.
DEADPOOL SCOOTER - VESPA PRIMAVERA SCALE 1:12 If you want this as a multi piece thing you can get it here: https://cults3d.com/en/3d-model/game/deadpool-scooter-vespa-primavera If you have any questions, let me know in the comments. You…
Printed on an Ender 3 V2 20% infill Rafts Support Surface Ironing enabled, 10% extrusion PLA, 201°C Nozzle, 60°C Bed There are a lot of these types of Models online, take a look the first picture to see if your dimensions match with my…
Hello. I am a student from the Czech Republic. My passion is 3d modeling and 3d printing. I will be very excited if you follow me in my work on social media. It will help me a lot as a student.…
Scooter is our free GizmoThrill example model. This is the kind of fun-to-assemble kit you can expect to get every month in our Printables club . This kit features a functional crane as well as some other moving features like the rudder,…
It is difficult to print this accurately since there is no good orientation. The originals (in colour) are most probably injection moulded. I printed it horizontally , the top side came out amazing with ironing but the bottom side…
Ein Nachbau eines Autoscooter Chip. Replika. Nicht zur offiziellen Nutzung in einem Autoscooter freigegeben.
Kids have different scooters, one with 110mm and the other 100mm. Wanted the same stand for both so designed this thing in Tinkercad. Probably fits different size wheels too as long as the ton exceed 25mm wide. All the scooters we have…
Mini scooter for Mini 13. The main body of the scooter prints-in-place. Wheels and axels print separately. Once printed, place an axel inside each wheel, then place wheels in the scooter body. Use a piece of filament to thread through the…
This Mini* Scooter has full mobility on the wheels and handle bar. Printing suggestions: Print on its side at a layer height between .1 and .2mm. Supports are required, select wisely. Removing the underside supports without breaking the…
In tested scenario scooter stands on front tire. Short-term testing proved it's able to hold scooter lifted. Printed in PETG with 60% infill, 0.2mm layer height. Compatible with: Mi Scooter 1S Mi Scooter 2 Pro Mi Scooter 3 M365 Pro (use…
Capture the stylish spirit of Italian mobility with this 3D printable STL model of a Vespa Scooter. This iconic scooter model is perfect for enthusiasts of classic European design and city cruising, offering a charming piece for their…
Don't use this chip without permission of the owner of the scooter I'm not liable for any damages caused by this chip
I got an old scooter from a friend, but the rear mudguard was broken off and missing. I designed this to be as close to the original as possible while still being easy to print. -----Slicing----- Because this model is too large to fit on…
Fairly form fitting to the wheel's contour to minimize stress, it has just enough wiggle room to get on and off without a problem. I'd recommend trying to remove them once you have one side of the tire out, otherwise they are effectively…
🛴 Scooter Capybara – The Chillest Ride in Town Meet the Scooter Capybara , the ultimate symbol of slow-lane swagger! Whether he’s late for brunch or just cruising for snacks, this laid-back legend rolls through life on his trusty scooter…
Retro Moped Assembly Kit 1950s Inspired Mini Scooter Model This is a 3D printable retro-style mini moped assembly kit. The model is designed like a small plastic model kit. Each part is arranged on a frame, so you can print the plate,…
Cup Holder. Internal dimensions, diameter 66 mm to 83 mm, height 120 mm. Fits perfectly: TEFAL Travel Mug 0,36l Print in PLA or ASA, e.t.c Infill min. 30% It is possible to print without supports. Variations: With holes With the words Cup…
This finger scooter is the second street version, which was built based on community recommendations. It’s light, durable, and great for play or display. After creating the best 3d printed finger scooter, I wanted to make it even better,…
I imported the fob into Fusion 360 and added some simple designs to easily identify what each key was for. For me this was an electric scooter, minivan and a tuk tuk. I have included a .f3d file so you can more easily make your own!…
Update03: Added Bracket for heat inserts M3x4x5mm. Update02: Added bottom hook for U-LOCK - ULTRA COMBO 245/153C. Update01: Addetd top hook for 25mm thick shackles with inner Diameter 100mm. Since theft protection is an important issue…
Sturdier tha others and printable without support. NEW VERSION. With ears for better fixation.
Rear fender replacement for Xiaomi M365 scooter. This part is both stronger and lighter (160g) than the original one, though I did manage to break it after a while, so consider using one of the aftermarket fender supports. Print Settings…
Track your Xiaomi Mi Scooter with your AirTag and hang a small bag on it!
This protects the cable connector in the rear of the scooter from being damaged over time. I just glue it in.
Take care with this part. It needs strong layer adhesion, so it won't break. I would suggest to print it in PETG with at least 6 perimeters and ~30% infill. Printing in a housing would also increase the layer adhesion. NOTE: If you decide…
A Flexible Sock to go over the Scooter's side stand. Reduces chance of damage to floors and ankles and shins. I used: Filaform RED90A 0.8mm Solex Nozzle 100% infill If you place the closed end on the build plate, no supports are required.…
full twist throttle for your ninebot scooter
Tempomat for Sowlow SO3 E-Scooter
you need a 3d printer an it need to be printet with support structure
infill:30-100 supports: yes brim: optional walls: 2-4
Designed specifically for the Doc Green ESA 5000 (Xiaomi M365 / Pro clone) E-Scooter (periodically sold by Lidl) but potentially compatible with the Xiaomi M365, Pro and Mijia versions too (no guarantees however). These Vibration…
Introduction I wanted an almost invisible mount for an Apple AirTag for the e-scooter. The best option here seems to me to be the existing reflectors. I'm not quite sure if these fit the different models in the EU or other countries. I…
I redesigned this hook to both improve the general look and feel to more seamlessly blend in with the general design of the Segway Ninebot Scooter and I also wanted to make it stronger and more effort to remove. This hook can easily…
Do you like fingerboarding? Are you a skater? Print yourself a street finger scooter!
This is a wall mount for a Xiaomi Mi Electric Scooter Charger Wall Mount for 1S/Lite/Pro/Pro 2 Category: Automotive
The Xiaomi Mi Pro 2 e-scooter can be switched on by anyone when it is parked and equipped with different firmware, for example. The dashboard cover prevents unauthorised switching on of the scooter. It also protects the scooter's…
Nice basket for kids Scooter. easily attached with clips.
No Supports is needed. PETG, 4 perimeters. Original from: https://www.thingiverse.com/thing:3190522
This is a sun shade intended to reduce glare on the QS-S4 LCD used on many, many brands of E-Scooters. Zero, Apollo, and many many other manufacturers and importers use this same LCD. I printed it last night, have not had a chance to ride…
This is a pair of hooks for your My Electric Scooter. You can print either one, the other or both, as one is intended to serve as a hook for your bags at the front, and the other is just a support for your scooter lock. In order to attach…
Taschenhalter für Segway Ninebot Max G30D II Die Tasche wird normal Innen befestigt. Ich bin jedes Mal beim Auf oder Absteigen daran hängen geblieben. Wenn man sie Vorne und am Lenker befestigt, wird das Licht verdeckt und man kommt…
This model use M3 screws and M3 nuts with 6mm of diameter in order to assembly bottom jaw to the scooter or bike handlebar. The screw used in the main jaw is a M8 bolt using 1.25mm thread. Enjoy it! Changelog: 2nd Sept 2023: I've change…
No special printing instructions required. Look good with filament change at 1.1mm height.
Designed a scooter stand for my nephew. I made it specifically for Blunt Prodigy X Scooter Fits any scooter with the wheel size of 120mm x 26mm Printed in PETG, 0.6mm nozzle, 25% infill. no supports
Three countersunk screws M3 x 10, three lock nuts M3 Best to print with ASA filament, or also with PET-G. No PLA. When printing 193 mm high. Remove the original fender: Unscrew two screws and the two reflectors together with the black…
I've designed this stand for kid's scooters. It's stable enough to do not fall to the side with little alignment effort. It was made for scooters with 12cm x 2.5cm (about 4.7" x 1") wheels. The design has an indentation at the center so…
A Stand i designed to have my scooter stand up somewhere without drilling holes into the wall to hang it.
Most scooter stand that holds the scooter in its driving position, which takes a lot of space dur to the horizontal handle bar. This scooter stand holds the scooter flat against a wall. Fits 100-120mm wheels (trick scooters). I printed it…
This is the best 3D printed finger scooter - small, fun, and easy to use! It looks and moves like a real scooter, with working wheels and strong parts made for smooth tricks. You can do spins, jumps, and other cool moves with your…
Scootaloo, just walking around. (My Little Pony fanart.) Based on the drawing by xbi: https://www.deviantart.com/xbi/art/Everfree-Forest-Cmc-Scootaloo-Sweetie-Belle-Apple-828884645 Print instructions The model comes in two variants: one…
3D-Printed Bottle Holder for Xiaomi Electric Scooter (40 mm Clamp Diameter) This custom-designed bottle holder is specifically made for Xiaomi Electric Scooters and securely clamps onto the scooter’s stem with a 40 mm diameter. It is…
Basic design for display cover on an electric scooter. Display type is QS-S4. It also fits on TF-100. If you have other display try measure is. Inner diameter for this is cylinder high 20mm and width 60mm. It does not cover the display…
The parts "Clip", "main-short" and "crew" are from the original model of the author PlasticBarista I designed a new "jaw" part because I had already broken the original model several times. It has two holes for 6mm aluminum rods. Hardware…
3 models of xiaomi m365 pro or pro 2 scooter hooks (it will probably fit other models) the first is a slim version for light luggage need 14mm screw with flat head second one (strong) needs a longer 20mm screw with cone head and you can…
Elevate your Xiaomi Electric Scooter Mi 3's style and protect its deck from scratches with this 3D-printed accessory. It's designed for easy printing in PLA material and requires no supports, making it hassle-free to share and use. Key…
A friend had their electric scooter mudguard break, so I decided to whip one up based on the hole sizes and the original shape, complete with light fitting on V10. The V11 version is more in line with the original profile. Printed in…
Key ring for Vespa Scooter layer 0.2mm Colour change at: 0,8 2,6 3,2 Schlüsselanhänger für Vespa Roller Schichtstärke 0,2mm Farbwechsel bei: 0,8 2,6 3,2
A replacement rear wheel nut cover that also fits an AirTag. Fusion 360 file is provided so it can easily be adapted for newer Xioami scooters. Print in picture was printed with 0.6mm nozzle and PLA. If scooter lives outside, PETG or…
A little clamp that arrests the accelerator lever paddle on an e-scooter with a ⌀22mm handle bar in a fixed position by friction. This sets the throttle to a certain position while avoiding sore thumbs.
This is a remix of https://pinshape.com/items/7974-3d-printed-gro-scooter . I cutted some parts into pieces for easier printing without support. Please print wheel halfs 4x. Enjoy Print Settings Rafts: Doesn't Matter Supports: Doesn't…
This is still in early stages. Please give me feed back. Make the model bigger or smaller so it fits yours.
Its an adapter that fits over your throttle switch. It gives you a second thumb location to push on. I found the original location to be way too low for someone as tall as me. This makes it more convenient to hold down on long trips. It…
Kit card scooter model. It can be printed as a two-color model.
I was looking for a scooter stand as the one we have always falls over in the garage. Mainly because the mounted lock is too heavy and the scooter tips over. The holder is now being added as an extension to the parking space for the stunt…
A fully fonctionnal 100mm Scooter Wheel for freestyle. Rim made of nylon (nanovia pa6) and type made of TPU (esun TPU). Sucessfully tested by my 7 years old child. Printed with 4 perimeters, supports on the central part for the rim,…
A practical modification for your e-scooter
Broke my front mudguard (by over tightening the screw) after replacing my front tire. Definitely needed when driving through the rain! Position the model on it's side on the build plate. Support on the wheel side probably isn't necessary.…
For Ninebot Es1 Es2 Es3 Es4 kickscooters.
A stand for a scooter, print with at least 5 perimeters and 30% infill, a doublesided tape was used to stick it to the ground, see the photo on how to set it, in case you need different side just mirror the print
A remix of Supi99's design here . I just got a KQI 300x and really don't like twist throttles on standup scooters. This adapter makes it a hybrid design, so I can use both the thumb and the twist portion. No hardware required, just a drop…
Print Settings Printer Brand: Anycubic Printer: Anycubic I3 Mega Rafts: No Supports: No Resolution: 100 Infill: 10 Filament: Doesn`t matter something clear would be best Notes: Category: Sport & Outdoors
A happy, bouncing Scootaloo! Inspired by the drawing by Imalou: https://www.deviantart.com/imalou/art/Here-s-my-aunties-733431313
I've created a mount for a U-Lock for my Xiaomi M365 scooter. The diameter of the lock rod is ~14mm so the hole is 14.5mm. You need 2x M3x10mm Socket Head Screw and 2x M3 Nuts. Print with PETG for flexibility & strength. I've added the…
What's this? This is my custom wallholder for a Xiaomi Mi M365 Scooter, including space for the powersupply. I wanted to create a design which doesn't look too bad, is able to securely hold the scooter and also doesn't need a ton of…
I made this bracket is to be mounted on the steering column on my Segway Ninebot Kickscooter MAX G30D II (Please note that im on a beginner level, when it comes to designing parts in fusion 360) Its a tight fit around the steering colom,…
This is a set of blocks that can be used to recreate the Classic Space Scooter published in 1981 at 500% scale. The stl files for the parts have all been organized into folders to make them easier to find. Please use the following table…
NON COMMERCIAL USE ONLY. If you intend to print this commercially, please contact me for licensing. Mudguard/fender for the Sencor Scooter 2020 e-scooter. Might work on other models as well, I'd be very happy if you tested it out and let…
This minimalist sculpture of a scooter goes well with many decors. The sculpture is freestanding on a desk, shelf, cabinet, etc. Prints fast without supports.
This model supports an enlarged screwhead of 10mm and a screw distance of 24mm. I just enlarged the screw holes laterally so it should also fit the original distance of 24.6mm should this in fact be the right one on your scooter. One…
My Daughter requested star pattern grips, so I made some. Printed in TPU, with the hole in them for tassels! Fits the standard bike handle bars. but you can scale them to fit yours. a good test is to just lower it through the bed before…
This is a model of a scooter footrest. The model is compatibel with the scooter “Globber GO UP Sporty”. Print settings Printer Brand: Creality Printer: Ender 3 S1 Pro Supports: No Infill: 80% (for extra strength) Layer height: 0.2 mm…
Introducing the Xiaomi Electric Scooter Folding Hook Cover, a convenient remix of the XIAOMI m365 Scooter folding hook rubber cover. Designed to address the limitations of the original model, this remix ensures compatibility with a wider…
I took the already great idea and improved it in the following aspects: 1. Added two clips, meaning you no longer need to glue the part onto the scooter. This works best with PETG, since the clips are very strong and springy then. 2.…
E-Scooter Versicherungsaufkleberhalterung license sticker holder. versicherungHalterwithHoles.stl - Has holes for attaching to a fender using M3 Sink head screws versicherungsschild2.stl - is with out holes so mounting is up to you…
You have to drill the holes and put (glue) some foam under the cover to keep the battery in place.
It need to be printed with a flexible material like TPU
Kickstand-shoe for Segway Ninebot F3/F3Pro/MaxG3 for better stand and stabilisation of the original-delivered Kickstand. Material must be TPU!! With this part you elevate the angle of the Escooter in the stand-postion for about 4 degrees.…
Driving the E-scooter for long period may strain your thumb muscles. So I made this adapter to convert the thumb throttle to a motorcycle style throttle. I tried my best to get the tolerances correct but after printing you might need to…
Super easy to print , no supports required! makes long scooter rides more enjoyable! any revisions Email [email protected]
Chonky Cat on a Scooter Ever wondered what happens when sass, attitude, and a scooter collide? Meet Chonky Cat on a Scooter – the heavyweight hero you didn’t know your shelf needed! Some supports are needed. I used organic-style supports,…
My original light cover broke off. This cover's purpose is to protect it again water and is transparent to let the light through. It needs to be glued on. Printing instructions 20% infill 0.2 resolution No supports PLA
I designed an adapter which fits to the Scoot and Ride Highwaykick 1 scooter to guide your child with a handle. You can connect it to the original position like shown in the pictures. To connect the adapter with the scooter you need to…
OUTDATED, GO TO https://www.printables.com/model/457295-sencor-scooter-2020-mudguard Replacement mudguard for Sencor Scooter One 2020 escooter. Supportless print. Recommended PETG. You'll need three M3 nuts for attachment. Three versions,…
![[OLD] Sencor Scooter One 2020 Mudguard/Fender](https://media.printables.com/media/prints/306893/images/2672588_f6f50715-f500-4047-987d-8b365529d0bd/large_display_3011e5fa-0b1a-496d-8956-c65255a54e28_306893.jpg)