Counting matching models…
These are T-Nuts for IKEA SKÅDIS pegboards that make installing accessories on your pegboard much easier . You no longer have to design custom mounting hooks into your part. All you need is holes and alignment guides. The T-Nuts come in…
This wiper has been superseded by a new revision with several improvements: Improved dimensions for precise fit A right side version Slim profile for unobstructed LED status bar visibility Improved silicone pad position allows wiping on…
These are customizable arms and knobs for the Modular Mounting System, similar to GoPro's Three-Way Pivot Mounting System . The design is entirely based on the Modular Mounting System Arm V4 ( thing:3689842 ) by jtronics but it uses the…
This is a power distribution block that uses Wago 221 connectors . It comes with many different mounting options and a base model is available in STEP and STL to easily remix and make your own mounts. You can use it for whenever you need…
These are detailed models of IKEA SKÅDIS / UPPSPEL pegboards in all standard sizes . They include the pegboard, the mounting bracket, screws, and standoffs. You can use these models in CAD assemblies to create renders, to showcase your…
This is a Nozzle Wiper Arm with Purge Bin for the Prusa CORE One /+ that uses Bambu Lab A1 silicone nozzle wiper pads. It's available for both left- and right-side mounting. This is version 2 , an iteration of the popular version 1 , and…
This is a modified chest for the Dummy 13 posable figure by @soozafone for large, scaled up prints for easier assembly. The ball joint of the Dummy 13 figure uses a slightly undersized socket to provide the necessary friction. When…
This is a mounting bracket for the L-Boxx storage boxes by Bosch & Sortimo / BS Systems that works with the L-Boxx G4 and previous gen. L-Boxx. For drawers, shelves, wall-mounting, etc. Features Allows one-handed clipping in and clipping…
This is a remix of the amazing Quick-Change Paper Towel Wall Mount by DanPDK modified to work with IKEA SKÅDIS pegboards . It's very sturdy and does not wiggle or wobble. Thanks to the use of T-Nuts , it is very securely mounted and easy…
This is a case for button cell / coin cell batteries. It's a remix of the parametric Small-Battery Case by George F with various improvements: Slider rails Windows on the side to check how many batteries you still have A locking mechanism…
This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…
This is a baseplate for the Gridfinity modular storage system by Zack Freedman that fits in a L-Boxx Mini organizer box. It's based on the L-Boxx Mini inner volume model that can be used to make custom L-Boxx Mini inlays that fit…
This is a solid shape that represents the inner available volume of an L-Boxx Mini that I created using this method by Croaky Oak with a small clearance added. It can be used to make custom inserts for tools and other things by…
These are rails for the i-Boxx organizer boxes that can be used to build custom storage cabinets. The boxes are available from Bosch , Sortimo , BS Systems , and potentially other manufacturers. The rails work with the i-Boxx 72, i-Boxx…
This is an insert for the L-Boxx Mini to organize your Dremel bits based on the L-Boxx Inner Volume model . The L-Boxx Mini is part of the L-Boxx system and is available from Bosch and BS Systems and is available on Amazon and various…
This is a toolhead spacer with strain relief for the Voron V0.1 that makes the Bondtech LGX Lite extruder mod work together with the Umbilical PCB mod by timmit99 . BOM Qty Description Sourcing 4 M3x6 BHCS Aliexpress 2 M3x30 BHCS…
This is a scaled down hook based on thing:1727029 by Isaac Williams . The original hook was too big for my liking but I didn't want to scale the screw holes too. So I've recreated it from scratch. This hook has 110mm overall height, a…
This is a case for the NodeMCU ESP-32S development board by Ai-Thinker that can be mounted on an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure and easy installation. Note: This was made for the Micro USB version of the board and…
These are cable clips for the Modular Mounting System Arms and thing:3689842 by jtronics that allow you to neatly route any cables along the arms. The clips are available for cable sizes ranging between 2mm and 9mm in 0.5mm increments.…
This is a remix of the Prusa MINI Y Axis Linear Rails Mod by Ryper3D that I re-created from scratch from the original Prusa MINI Printable Parts with the following differences: Clean and pleasant aesthetic. No personal logos, crazy lines,…
This is an adjusted version of the Prusa brace for the Filler Spool Holder that positions the spool in the exact same location as the stock Prusa spool holder relative to the frame. Looking for a brace for the Bear frame instead? Check…
This is a holder for BAHCO sliding combination squares CS150 and CS300 for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts for a very secure mount. For CS150 there's a single and a double version for one or two combination squares…
This is a mount with strain relief to use the Bigtreetech EBB36 toolhead PCB with an LGX Lite extruder on an EVA 3.x carriage platform . This is a remix of the mount for the Orbiter 2.0 extruder by Iatraliptes . I recommend using a USB…
This is a STEP file of the Prusa Filament Guide for easier remixing since Prusa didn't provide one. I've created it based on the STL and it's 100% identical to the original. This is based on the R1 version of the filament guide. I…
This is a remix of the E3D Revo Nozzle Holder by Zbyněk Ch. for the Prusa MINI and MINI+. It is functionally the same but I wanted a less round design that blends in better with the rest of the printer. I used the same chamfers and angles…
This is a power distribution block that uses Wago 221 connectors that can be mounted to IKEA SKÅDIS pegboards. It uses the Skadis T-Nuts Mounting System. It can be used whenever you need an electricity input. For prototyping, testing, DIY…
This is an EVA3 or EVA 3.1 probe mount for the PCB Klicky rev3 probe . It's based on the probe mount for Volcano hotends by Matthew Johnson but shortened so that the probe offset isn't too high. The problem with using the Volcano mount on…
This is a holder for Bosch 12V FlexiClick Attachments (GFA) for IKEA SKÅDIS pegboards . It's compatible with attachments for Bosch GSR 12V-15 FC and GSR 12V-35 FC. It uses Skadis T-Nuts for secure, rattle-free attachment to the pegboard.…
This is a brace for the Filler Spool Holder by HugoHuge to work with 2040 aluminum extrusions instead , such as those used by Prusa Bear, Artillery Sidewinder X1, or Artillery Genius. It's based on the brace for the Prusa MK3S so it has…
Action cameras need action mounts! This is a very strong mount for IKEA SKÅDIS pegboards that is compatible with GoPro cameras and accessories as well as the Modular Mount System . It uses the Skadis T-Nuts for a very secure hold and easy…
This is a tiny hook for IKEA SKÅDIS pegboards. For the small things in life. It uses the Skadis T-Nuts Mounting System for a secure, rattle-free hold. It's designed for optimal layer orientation for strength and printability without…
This is a remix of the Prusa Mini Z-Top | Electronics Box Lid by freewheeler , the Raspberry Pi Zero mount lid by Deeps , and the Pi Zero hex lid by crokobacon with the following changes: Boxier design that, in my opinion, visually works…
This is a strong universal hanger for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts for a very strong hold and easy printing and installation. It does not wiggle or wobble and can hold quite some weight. Read more about the Skadis T-Nuts…
A strong mount to attach Velcro / hook and loop loops and straps to IKEA SKÅDIS pegboards. It is a remix of the Velcro Clip by Pavel Riedl that has been adapted to work with Skadis T-Nuts for easy and secure installation on Skadis…
This is an adapted version of the Prusa Filament Guide to work with the Prusa Filler Brace . It is single-sided and lengthened so that the guide hole is in the center of the spool. It's made specifically to work with modified Prusa Filler…
This is an adapter to connect the Magnetic PTFE Joiners by Line Arc Line to an EIBOS 3D Series X: Easdry filament dryer. It supports the “No Offset” type of PTFE joiner. It uses screws instead of additional magnets for the magnetic…
This is a Raspberry Pi mount for the Prusa Bear frame that works with heatsink type a.k.a. Armor cases , such as the Sertronics Armor case or the Joi-It Armor Case or any case of this type. It works with Raspberry Pi 3B, 4, and 5. You…
This is a Raspberry Pi mount for the original Prusa MK3S+ that works with heat sink type cases , such as the Sertronics Armor case or the Joi-It Armor Case or any other case of this type. It works with Raspberry Pi 3 and 4. You just have…
This is a hook that serves as an example for how to use the T-Nuts for Ikea Skadis . It demonstrates the ease of use, strength, and sturdiness of the T-Nuts. Read more about the Skadis T-Nuts Mounting System and check out the Skadis…
I remixed the Rocktopus and the creepy doll head into one cursed AF Octobaby. The chin needs support. First time using Blender. I did my best.
This is a simple little case with a sliding lid for the Dremel cutting bits, such as 561 MultiPurpose Cutting Bit , 560 Drywall Cutting Bit , and similar. It's easy to lift the bits by pushing down on one of the ends. I designed this to…
This is a tray for the DeLonghi KG89 coffee grinder . The KG89 is a very messy grinder and each time you pull out or insert the container for the ground coffee it'll spill some coffee grounds all over your kitchen counter. This tray will…
This is a remix of the Prusa MINI Z-Axis Brace by Brolin Workshop with clearance for MGN12C blocks that I re-created from scratch for using with the Y-Axis Linear Rails Mod . It is inspired by a similar remix by Ryper3D . The following…
This is an adjusted version of the Prusa brace for the Filler Spool Holder for the Prusa Bear Frame that positions the spool in the exact same location as the stock Prusa spool holder relative to the front edge of the frame / top…
This is an umbrella handle for umbrellas with an M14 or M14-ish thread . The thread size is based on measurements taken from my broken umbrella and the thread, which was made out of rubber, is oval, and seems to have a roughly 14mm widest…
This is a wall mount to attach a Bosch Unlimited Series 8 cordless vacuum cleaner to a wall . Large screw access holes big enough for bit drivers Compact Very sturdy STEP files available for easy remixing Looking for a mount for Ikea…
These are magnets for Ikea Skadis pegboards that are very sturdy and don't come off the board as you attach or remove things. They use the T-Nuts mounting system for a rattle-free tight fit and a very strong hold. Read more about the…
This is a bottom plate for the Flirc Raspbery Pi case to attach a Raspberry Pi to an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure, wobble-free installation. Read more about the Skadis T-Nuts Mounting System and check out the…
This is a mount to attach a Lenovo Tab M8 to an IKEA SKÅDIS pegboard . It uses the Skadis T-Nuts for a very secure hold and easy installation. It's sturdy and there's no wobble. The fit is tight. Don't be afraid to press pretty hard until…
This is a toilet paper holder with a magnetically attached, sturdy shelf for your phone, glasses, decor, or whatever. The shelf also protects the TP from dust, toothpaste splashes, etc. There are two versions of the holder for mounting…
This is a GoPro-compatible mount that can be installed in 15 different panel corners on the Original Prusa Enclosure . For compatible thumb screws and arms check out the Modular Mounting System Arms . Any GoPro-compatible knob will work…
This is a fix for the frame mount of Squirrelbrain's V-Minion Y-axis drag chain mod (3-hole version) where the frame mount interferes with the 3030 corner bracket and forces the drag chain into a smaller bend radius. You can find more…
This is a remix of the Polymaker Cardboard Spool Adapter with a larger inner ring to fit an OpenPrintTag.org NFC sticker . Additionally, an improved version that works better with Polymaker's new spool design is available. A trimmed down…
This is a customizable rack for PB Swiss Tools BitBlock bit holders (PB C6 970) . You can customize the overall height and the number of BitBlocks. It's ideal for use in a foam board but can be used stand-alone as well. The BitBlocks hold…
This is a sensor cover for the Bondtech extruder upgrade for the Prusa MK3S / MK3S+ for reverse bowden using a collet clip . It's a remix of the original sensor cover by Bondtech. Supported PTFE Collet Clips Name Printed Part Sourcing UM2…
This is a compact USB-C solder fume extractor that uses an 80x25mm 12V PC fan . It's intended for people who have to do the odd soldering job every now and then and want something that doesn't occupy too much space when not in use. It's…
This is a modified version of the Prusa accelerometer bracket for the Nextruder that works with E3D ObXidian High Flow Prusa Nextruder nozzles (and probably with E3D brass HF nozzles too). For installation and usage, please refer to…
This is a remix of thing:1118084 by Roy Edwards . This is a wall mount for Philips Sonicare HX6100 chargers . It's intended to be mounted to a wall or tiles using double-sided tape such as 3M VHB and resembles a Feller light switch to…
This is a GoPro-compatible mount that can be installed in the center of the front right corner of the Original Prusa Enclosure . It's an optimal position for a webcam that faces the build plate. The mount is moved slightly forward to…
This is a remix of Robert Cowan's Peggit Pegboard Mounting System Clip that works with IKEA SKÅDIS pegboards using the Skadis T-Nuts Mounting System , for strong mount that doesn't rattle. Read more about the Skadis T-Nuts Mounting System…
This is a remix of the Rat Rig V-Minion Bed WAGO mount by Squirrelbrain with a mounting option for the KUSBA USB Accelerometer (ADXL345) for Klipper . I recreated it from scratch using measurements from Squirrelbain's STL as accurately as…
This is a back plate for the Flirc Raspberry Pi Case to mount it to a Prusa i3 frame . It works with the Raspberry Pi 3B, 4, and 5 versions of the case. There are different versions of the back plate depending on the case variant. Note…
This is a wall-mounted holder for Nutribullet Extractor Cross Blades and Milling Blades . Looking for a holder that can be mounted to a Skadis pegboard instead? Check out the version for Ikea Skadis . Blade Compatibility This works with…
This is a remix of the "FANG-oz-40mm-MicroSwiss" fan duct from thing:2763931 by ozfunghi to work with a Phaetus Dragonfly BMS hotend. If your hotend is from Trianglelab instead of Phaetus, that should be exactly the same. I've added some…
This is a remix of the Reverse Bowden Holder for the Rat Rig V-Minion by RomRider to use with the Magnetic PTFE Joiner by Line Arc Line . It works with the “No Offset” type of PTFE Joiner. BOM Qty Description Sourcing 2 M6x12mm Button…
This is a universal attachment rail to attach accessories such as webcams, lights, sensors, etc. in the front corners of the Original Prusa Enclosure . It's an OpenBuilds V-Slot profile so it's compatible with many existing accessories…
This is a mount to attach a Bosch Unlimited Series 8 vacuum cleaner to an Ikea Skadis pegboard . It uses Skadis T-Nuts for a very secure and sturdy installation that can hold a lot of weight. Very sturdy Compact STEP files available for…
This is mount to attach a Xiaomi Mi Temperature and Humidity monitor (version 1) to an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure and easy installation. Read more about the Skadis T-Nuts Mounting System and check out the…
This is a holder for the scoop that comes with AeroPress coffee makers for IKEA SKÅDIS pegboards . It works with both the older version of the scoop and the newer version with the dimples on the handle. It uses Skadis T-Nuts for a secure…
This wall-mounted phone holder works with MagSafe or Pixelsnap devices. It uses standard cylindrical neodymium magnets arranged to mimic Apple's MagSafe spec. It self-centers like the real thing and meets the official magnetic force…
This is an adapter to attach a Casio F-91W watch to a Fitbit Air wristband . The Fitbit is then worn on the underside of the wrist. Note that this works better if you don't have a small wrist. If your wrist is too small the end of the…
This is a grippy sleeve for the PB Swiss Tools PB470 M 5mm hex to C6 bit adapter. It allows you to use the adapter as a finger bit holder to finger-tighten things that are hard to reach or just need a lot of finger control. All while…
This is a remix of @Line Arc Line's Squiggle Coat Hook that has been adapted to clip onto 25mm or 1 inch wooden slats instead of using screws. This hook is also 1mm thicker than the original and the upper hook is longer. This hook is…
A bracket with hook to mount the Hario V60 Drip Scale on IKEA SKÅDIS pegboards. It has guide wings that guide the scale to the hook. Super easy to use, no fiddling to find the hook. It uses Skadis T-Nuts for a very solid installation that…
This is a travel protector for T12 plugs , also known as Swiss 3-pin plug, SEV 1011 plug, or Type-J plug. If you have bent or broken the pins of your plugs during travel or transport, or if you simply want to prevent this from happening,…
These are replacement wheels for Orthex SmartStore Classic 35 and Classic 70 wheeled storage boxes. EAN 7310543530173 EAN 7332462058781 EAN 7332462058767 EAN 7310543541070 The original wheels are made in one piece and the axle can break…
This is a holder for Nutribullet Extractor Cross Blades and Milling Blades for IKEA SKÅDIS pegboards. It uses the Skadis T-Nuts Mounting System for a secure, rattle-free hold. Read more about the Skadis T-Nuts Mounting System and check…
This is a visualization of the first discovered radio pulsar, PSR B1919+21 . It was discovered by Jocelyn Bell Burnell in 1967. It's also the cover of Joy Division's debut album Unknown Pleasures . The visualization is a stacked line…
These are mounts for the Waveshare Raspberry Pi Pico Clock ( wiki ) for IKEA SKÅDIS pegboards. The clock attaches to the protruding M4 screw heads using they key holes at the back of the clock case. Uses T-Nuts for a very secure hold and…
This is a mount to attach the Turris Omnia open source router to an Ikea Skadis pegboard . It uses Skadis T-Nuts for secure installation. The mount creates a 5mm gap between the router and the pegboard to allow air flow. Read more about…
This is a SIPA WZU 83 laundry machine key holder for Ikea Skadis pegboards . It uses Skadis T-Nuts for easy and secure installation. Insert key both ways Slightly angled for easy access (space for fingers) STEP files available for easy…
This is an adapter to attach a Casio F-105W watch to a Fitbit Air wristband . The Fitbit is then worn on the underside of the wrist. Note that this works better if you don't have a small wrist. If your wrist is too small the end of the…
This is a magnetic PB Swiss Tools PB 53 or PB1100 ESD telescopic screwdriver holder for IKEA SKÅDIS pegboards . It uses Skadis T-Nuts mounting system for secure, rattle-free attachment. The holder provides one slot for the PB 53 / PB 1100…
This is an alternative wheel for the Move-It! rollers by GiantBrian . It features a slight curve towards the edges and a bit of thread. The thread is off the ground on hard surfaces but should start gripping on softer ground and when…
This is an adapter to use 22mm velcro watchbands with the Pebble Time 2 smartwatch . It was tested with the Garmin Ultrafit nylon watchband but most likely also works with other ~2mm thick 22mm straps and other with watches that use 22mm…
These are all currently available results.
