7,358 models
Inspired by commercial products and self-made solutions, I decided to design and print my custom version of a Nespresso capsules dispenser. It wanted it to be nice to look at, functional and simple at the same time. What you see here is…
ESP32 Devkit V1 Case w/ Snap-on lid with button detents and cutouts for USB, LEDs and pin access. This case is thick enough so that the pins are completely shielded inside the case, though accessible for connection. IF you want a version…
I made a remix to fit my ESP-WROOM-32D because the ESP won't fit with the original case. I also changed the fittings a little bit so that it can be easy reopened.
This mask can be used with a piece of textile or cotton pads as filters. You can also use it as a respirator if you have respirator filters. It's better to print with PETG or ABS so you can wash it in a dishwasher. Please print at 100%…
It's a medium sized clothespin, but as a single minimalistic part and print-in-place. It uses ‘snake-bite' style teeth to hold material together because it doesn't have any extra force pushing the clamp closed. The force is a little less…
I created a small case for my ESP32 / NRF24L01+ setup running the awesome OpenDTU software to monitor my Hoymiles inverter. The case was created to just fit the components I had available. It has space for a 46 mm x 59 mm circuit board…
Spare plug. Ready to ride. A spare spark plug belongs in your toolkit — this M14 Spark Plug Box for Vespa gives it a dedicated place. The two-piece printed case encloses the plug for storage and transport, with a screw-top closure and…
Ich habe den Batteriespender auf thingiverse gefunden. Mir hat gefallen, dass da auch ein Deckel bei war. Den Spender habe ich mit Support gedruckt. https://www.thingiverse.com/thing:4752641
Deutsch: Wenn eine Wespe kommt und sieht das fremde Nest, dann verzieht sie sich in der Meinung, dass da schon ein Wespenvolk angesiedelt ist. (So ist zumindest der Werbespruch). Skalieren Sie wie gewünscht, ich druckte es mit 90%. Nutzen…
Nespresso Capsule Holder - remodeled
I got a new Nespresso machine (Vertuo) for my birthday. I have decided to rint my own dispenser for the pods. I wanted something useful and easy to print. The model comes with 2 parts: Bottom and Cover. Those parts can be fit on a Prusa…
The housing was made for the AI-Thinker ESP32 Audio Kit V2.2 A405 (but should fit for the other variants of the V2.2 kit too). SD slot, USB connectors, audio jacks, both MICs, the LEDs and all pushbuttons are accessible. The RESET and…
This is a drawer organizer for Nespresso Vertuo pods inspired by the $20 ones you can find on Amazon. However, unlike those, you can customize this to exactly fit your drawer: just update the code with your drawer dimensions and generate…
This is a square version of my Triangular Nespresso Capsule Holder ( https://www.prusaprinters.org/prints/20307 ). This capsule holders takes 20 Nespresso or Nespresso Compatible capsules. Print instructions This can be printed at any…
You absolutely need to use arachne/variable extrusion width to print this. The outer walls vary from 0.38-0.6mm to provide the snapping action for the lid while still using only 1 “perimeter” to allow fast printing. The reset and…
Two-part 3D printable enclosure case (base + lid) designed for the ESP32 2.8 inch display module (ESP32E). Features a screen window on the lid, ventilation slots, USB port cutout and screw posts for assembly. Footprint 96.4 × 60.4 mm.…
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
Der Nespresso Kapselhalter ist gemacht für das Prusa Wooden PLA Filament. Nur mit diesem habe ich eine gute Qualität hinbekommen. Für den Druck beider Teile habe ich die MMU 3 ausgeschaltet und den Extruder direkt gefüttert. Beide…
We often buy other brands of Nespresso capsules, such as the Jacobs or Omnia capsule in the picture. These are often not packaged in the same way as the original. Thanks to the designer of the original model because it works great, I just…
Key points 1 Uses household tissues as the filter. 2 Large filter area. This reduces the flow rate per area and allows more layers (12 – 16) to be used, thus increasing filtration efficiency. 3 Comfortable because the only thing against…
Hi all. Mine Nespresso C55 U-Milk failed due to failure in snaps of steam cover distributor spout. I modeled a new part and it fits and works perfectly. Original part is made from ABS but I printed it from PETG. Printing instructions:…
Funnel for filling 54mm portafilter with coffee to prevent spillage. Tested with Sage/Breville portafilter. Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: No Supports: No Resolution: 0.2mm or 0.3mm Infill: 20% Filament:…
A remix of mhparsons Prusa camera mount. The cable channel has been modified to accommodate a usb cable - this does unfortunately mean it needs multiple supports. The included g-code file has supports painted on in all the necessary…
This was based on an unresponsive yoyo I purchased off Amazon. The design worked for me but it can definitely be improved upon. If you do make it please post the make. Thanks and good luck. Also here's the link to the youtube video on how…
Este es un rediseño de un despolvillador de yerba mate basado en su modelo original. El objetivo de esta versión es mejorar la eficiencia del filtrado y la funcionalidad general del accesorio: 🧉 Mejoras principales: Distribución…
Use this spoon to measure the volume of instant coffee you get from one stick. I printed this part in PETG, with a 0.6 mm nozzle. Update: added a spoon with a longer stem.
Nespresso coffee capsule holder for Prusa MINI. I had to make this model because the original did not fit the mini. Just use some double-sided tape to attach it to the wall. Print instructions Print in PLA or PETG I used 15% infill for…
Key ring for Vespa Scooter layer 0.2mm Colour change at: 0,8 2,6 3,2 Schlüsselanhänger für Vespa Roller Schichtstärke 0,2mm Farbwechsel bei: 0,8 2,6 3,2
I designed a funnel for my ECM Espresso machine, which fits into a default E61 brew group. The E61 brew group is the most common type found in almost every larger espresso machine. I created this design to work with the Eureka Mignon…
Respiratory Muscle Trainers (RMTs) are proven to be useful in improving the condition of patients after breathing-related conditions like COVID-19 or COPD. These RMT devices are neither well-available nor affordable in most Low- and…
This is a CASE for a EMS interface board V3 and a ESP32 LOLIN32 Lite board. EMS interface board V3 ESP32 LOLIN32 Lite board The EMS-ESP github page is here I added the 3mf Prusa Slicer project files because of the honeycomb pattern trick…
It's a tiny clothespin, but as a single part and print-in-place. It uses a ‘snake-bite' to hold material together because it doesn't have any extra force pushing the clamp closed. The force is much less then you'd get from a clothespin…
Make your own Vespa A detailed 1:6 scale model of the Vespa Primavera scooter. The model includes a functional stand, small, medium, and large windshields, standard rear handles, a rear folding rack, and a functional top case. Print…
This is an enclosure to mount an ESP32-CAM on X-Axis stepper motor. LONG CAM CABLE NEEDED! (I used ov2640 with 75mm cable). Inspired by similar mounts for pi cams and customized for ESP32-CAM and Prusa Mini. Case is the same in both…
Simple Case for ESP32 Wroom with SHT31 Sensor with honeycom Lid No Glue and no Screws needed Just plug it together, you just need to solder the ESP32 and SHT31 To put it on the Wall you need only double-sided tape. The Sensor should be on…
Camera Mount for MK4(S) suitable for Part of MK4 "x-end-motor-R2.stl2" No support
To make these bottom paper filters for espresso you'll need: - A Chemex square paper filter (non-affiliate link) - A 2.25in EK paper punch (non-affiliate link) Fold the square paper filter in half and punch (here is a video tutorial by…
This is a small case that snugly fits an AZ-Delivery ESP32 D1 Mini board. The lid is designed to mount an external BME280 or BMP280 sensor board, although this is optional. It has been designed and printed as part of this project:…
The Senosor became too hot on the first model despite the honeycomb on the lid. For this reason, I also had to design the outer wall with honeycomb. Now there is no heat problem in the housing and the sensor measures the content of CO2 in…
One piece version of the excellent Nespresso Vertuo Capsule Pod Dispenser by sdgsean. Modeled to support 3 slide out drawers of the original design (included here but is the same as the original model). Printed front facing side down with…
You need 4 7mm standoffs and bolts to build this case. The bolts fix the topcase to the electronics and the standoffs. The big hole on the backside is closed, too.
Modell von einem Clip um den gefederten Gepäckträger meiner Vespa PK50XL in der unteren Position zu fixieren. Gedruckt in Prusament PETG-CF ohne Stützmaterial im Profil 0,2mm Structural. Viel Spaß beim Drucken! Wenn Euch das Modell…
Bin filler and part dispenser for Honeycomb storage system Functionality With this model you can fill up your storage bins easily and fast by just pressing the bins against the front lip of the slider. A spring will bring the slider back…
If you want to use your Adafruit feather in any sort of automation setting you might want to mount it on a DIN rail. The standard DIN rail mounts don't really have good mounting locations for the Adafruit feather board. This print…
This is a simple 3d printed pen plotter that broadcasts a wifi network with web server that fully houses the whole interface. So anyone with wifi and web browser can use the device. The plotter runs custom firmware on an ESP32 and serves…
Nespresso Vertuo Capsule Dispenser. This design holds two of the 61mm x 68mm boxes.
This is a air quality lamp for CO2 metering. I used the design from Lilifee (look at the remix). The original was for the BME680 Sensor. I needed the case for the MH-Z19. So I changed the inner of the case and the "Top"-part. The…
Built to suit the wifi multiboard found on Aliexpress:…
I needed a model for an assignment. This Worked. I thought I would post it on here in case if anybody needed a cell model. I printed everything on 5% infill on an Ender 3 Max. The base and the main plant cell need support, but be careful…
As you can see, chicks can also swim. Add a little less ballast than I did so that it can float more easily if you like. I used 7g (2 Allen screws M5x16) and printed with 0.2mm layer height without support. Art design by Hannah. Happy…
Updates compared to version 1. Center shaft increased to hold sleeve New base for stability and to deploy capsules from sleeve. Build Top section requires a brim for stability Bottom section I placed three support paint on enforcer points…
I want to introduce you to an easy-to-print Vespa Keychain with two colors - print it in multiple colors by adding print stops where needed. If you need key rings, get them for example from my model page here . Print Settings · print with…
A minimalist esp32 case, prints in 11 minutes Update: Added experimental 5m vase mode version of body.
Im Beispielfoto mit Prusament PETG (0,2mm Schichthöhe) gedruckt. Dieselben Druckeinstellungen sind im angehängten GCode (mit Farbwechsel) enthalten. Eine weitere GCode-Datei ohne Farbwechsel ist auch dabei. Erste Schicht Düse 240°C / Bett…
A minimalist housing design for OpenDTU, providing component visibility and accessibility for maintenance Additional components: 1,3 Zoll OLED display ESP32 NodeMCU NRF24L01+
ESP32 camera case from @MichalFanta modified to add a support for a wifi antenna
English UPDATE: Updated stl of the space-time curvature models. In this update I have slightly modified 1/2 of the equation and made some subtle changes to the surface curvature. I include the 3mf file with the settings for the MK3.5S…
Este jarrón impreso en 3D presenta una cautivadora forma espiral que asciende desde una base redondeada hasta una boca con un delicado borde ondulado. Su diseño se caracteriza por un patrón de aberturas caladas que siguen la trayectoria…
Vespa Cosa Front Brake Cover – Discontinued Part Replacement An accurate reproduction of the Piaggio Vespa Cosa front wheel brake / hydraulic line cover — the trim cover that shrouds the front brake and hydraulic line. This part is long…
This is a ESPHome based Hichi/Volkszähler interface specifically for the Holley DTZ541 that has alignment pins instead of the more common round indent around the IR interface. UPDATE 2023-01-29 Previously mentioned issues with the…
A compact and secure box for 10 Nespresso capsules , perfect for carrying in your bag—whether you're traveling or heading to the office. For an extra touch of style, you can change colors at a specific layer , adding a sleek two-tone…
Connection Box for Wago 221-420 to Breadboard – Sensor Integration This enclosure provides a clean and robust interface for routing multiple sensors via three Wago 221-420 (10-slot) connectors into a 400-pin breadboard (84 × 55 × 8.3 mm)…
This is a simple enclosure for holding your excess Phillips Respironics Dream Station CPAP Air Filters. This case uses the flexure of the plastic to lock it closed in place with small Detent style bump outs on the internal base. The lid…
This is a small pill despenser for seven days of a week. Two round neodym magnets 8x3mm (diameter x height) are used to hold the axis of the turnable cover. The magnets have to be inserted during a printing pause e.g. using the…
The original model by @MagnusT serves as the basis, which, like the Smallest possible ESP32-CAM (Taller remix) by @mdzi , was enlarged to 17mm height. This means that the ESP fits into the housing with its legs. Unnecessary contours and…
Hey there! Check out my website to see the latest products I've designed—now available for you! Don't miss out, hit the link and explore what's new! My Shop: https://buymeacoffee.com/cc3dprojects/extras My Website:…
Im Beispielfoto mit Prusament PETG (0,3mm Schichthöhe) gedruckt. Dieselben Druckeinstellungen sind im angehängten GCode (mit Farbwechsel) enthalten. Eine weitere GCode-Datei ohne Farbwechsel ist auch dabei. Erste Schicht Düse 240°C / Bett…
Hi! I use a simple IR-Remote to control some of my smart-home devices and automations using home assistant. I built this little IR-Receiver using an ESP32 (CH340) USB-C Board and a KY-022 IR-Receiver. Both very inexpensive components. I…
A Wrist/ Arm mount which is bended so it fits my arm ( when mesured with calipers 68mm in diameter. ) The Idea is from MrLawr3nce on Thangs:…
Case for openDTU AllianceApps DTU Adapter PCB - ESP32 to NRF24L01+ Find Board here: AllianceApps DTU Adapter PCB - ESP32 zu NRF24L01+ Printed: Printer: Prusa Mini+ Filament: Prusament PETG Nozzle: 0.6 Profile: Prusa predefined 0.15mm…
ESP32-CAM Mount for Prusa XL EnXLosure with ventilation openings
With this box you can install Home Assistant Glow on an esp-01s board powering everything directly from main power of your house. From original setup of the Glow I removed the status led because I don't need it, but it can be readded…
Use - D1 mini esp board - BH1750 light sensor
I found ball mount of original model loosening over time and being not stable, so I've replaced it with more stable GoPro-styled mount. It can be used with plethora of GoPro mount compatible accessories, or - as in my photo example - with…
Files Top Base Base with antenna Photos: Grey Print = No Antenna Black Print = Antenna Printing This model does not require external hardware to fit together. Printed without supports. Print setting used in photos: PLA, Prusa Mini + Input…
Case for HomeKit project for IR remote old devices (television that doesn't support HDMI-CEC, a speaker set that is connected to it or just anything that may be controlled via infrared remote even an A/C) describe on gitlab link .…
After using this (excellent!!) Nespresso capsule dispenser for months and loving it, I found myself wishing a slightly different “entry point” for the sleeves at the top of the dispenser.: When opening the sleeves, there's usually 2 small…
As respooling any is always a hacky process, this drill adapter is a very simple model to put into your drill to help you respool. I've used this on old spools by just binding this Tool against the spool using cable ties. I recommend…
Esports Team Falcons Apex legends keychain
For everyone who loves esports !
I use the HC-SR04 sensor to measure the distance of a person approaching to turn on or off the light with Home Assistant automation. I use the D1 Mini board.
Just made a wider bore in the frontpart (10.2mm) for a 120° Wideangle Camera. All other parts remain the same. Camera: https://de.aliexpress.com/item/1005007291555550.html
A arm mount to hold the cheap PBB8-0147 powerbank found at your local Five Below or on Ebay. Oh, and the ESP32 itself! Intended for the LucidVR VRGloves to power the unit without adding extra weight on the hand and wrist. Designed to…
Arruela, espaçador para quadros e suportes de parede.
My first project! I received a hand-me-down Nespresso Original machine that was missing the water reservoir cover, so I decided to make a replacement. I've tweaked it so that it fits snugly, but still has air channels to keep the machine…
This is Nespresso Atelier clip for storing the frother. Easy and short print. I printed in PETG but PLA will be good as well Double side tape to attach it to the machine any where you want Enjoy
I designed a case how I needed it for my setup. The ESP32-CAM fit very tight on all side in the case. There are shims on the front and back cover so no movements are possible in any direction. The back pins are also completely inside the…
this wheel breaks a lot Repair Video: https://www.youtube.com/watch?v=F5caiNtt6X4 i havent printed it yet, the FreeCAD Model is available as well 2023-05-18 i printed it, with the uploaded gcode. The Hexagon needed a bit of filing and the…
What this is This is a spool intended to fit large quantities of spool-less filament to respool it onto a "normal" spool. It could also be used as a variable refill spool. Through my own stupidity and a “little” accident I dropped an…
Print at 100% infill with a layer height of 0.08mm with a base layer of 0.16mm Filaments Used: PETG JAYO Black Transmission Distance: 0.3 PLA+ Sunlu Blue Transmission Distance: 4 PLA+ Sunlu Red Transmission Distance: 6 PLA+ Sunlu Green…
This is a model I made for my telescope to protect the interior from dust and debris during transport. It is a 78mm Moonlite Focuser End Cap for Esprit 120mm Telescope but you can resize it for whatever telescope you may have.
3D printable box for Wemos ESP8266 D1 mini and 128x64 0.96'' OLED display for Display: LaskaKit OLED display 128x64 0.96 I²C Wemos: WeMos D1 Mini Pro 16MB ESP8266 WiFi Module !!! Be careful !!! This model IS NOT for this display…
luego de quemas mi placa e no quise desecharla, asique decidí darle un uso decorativosp32
Case for esp32-eth01 with custom pcb link for custum pcb for esp32-eth01 https://www.huizebruin.nl/product/esp32-eth01-ethernet-pcb-scr-con-01/
EN : Utensil for play kitchen Material : PLA Layers : 0.3mm Supports : nine Brim : yesEN: Utensil for play kitchen Material: PLA Layers: 0.3mm Supports: nine Rafts: yes PS: The upright position is for aesthetic reasons and requires a…
So, I ordered some filament on 2kg spools, but those don't fit any of my other spool holders and won't fit atop my MK3Ses, so, I needed to re-spool the filament to 2 “normal", 1kg spools. I already use these spool holders for my…
This model is a way to reuse the plastic part of a prusament spool. If you don't have a empty spool, don't worry, you will have it before you finish printing this model (it's become a little more bigger than i expect). Every wing are made…
Ein Bastelprojekt mit meiner Tochter, von Ihr ist auch der Name Papu. Snake LED Spiel mit eine 8x8 LED-Matrix, einem Arduino, und eine Joystick. Zusätzlich habe ich noch einen kleinen Lipo und ein Ladegerät verbaut. Video zum Spiel…
Behuizing voor ESP32 ETH01 en custom pcb van huizebruin.nl
Unlike the original design, I flipped the drip tray and adjusted its dimensions so it stays securely in place during use and doesn’t fall out after assembly. This model is also designed to naturally return to its original position,…
![Despolvillador yerba mate [v3.1] (Dust yerba mate remover)](https://media.printables.com/media/prints/433840a4-f2a8-4a84-85ac-b5686cb7ee4a/images/9974806_18a6b8ac-1630-4f21-a1cb-28191575e24b_6c4569ef-7484-4702-a782-9de900a50494/img_20250608_201121656_portrait.jpg)
