2,142 models
A small, strong case with a collection of optional inserts for different uses. Case Use a section of 1.75mm filament inside the hinge to connect the lid to the base. Depending on your printer/setup, this hole maybe be on the tight side or…
Print approx. €0.86–€1.06 excl. taxPreliminary estimate for one variant
Everyone who is traveling with a Caravan knows it. The grassel and bollards in the fridge because the bottles bump into each other all the time while driving. With the help of this spacer, you can easily determine the size of your…
Print approx. €0.84–€1.03 excl. taxPreliminary estimate for one variant
A modified version of Fabian's DIN Rail Bracket to push some M3 threaded inserts into the holes. The holes are now 4mm wide and I added some material around one hole, so the inserts won't stick out.
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
A starter for the urgent desires. So, com board is ready and was done with M3 heat inserts in mind. As there is currently no idea of where it would commonly fit this is not the final solution. I for my part will fit it into a gridfinity…
Print approx. €1.35–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
Some Inserts for the Prusa lettering on the LCD Cover. I uploaded a test file too, so you can test whether the letters fit inside. If it doesn't fit, play around with the XY compensation. If you like check out my other designs too!
Print approx. €0.09–€0.11 excl. taxPreliminary estimate for PETGSource material: PET
Box inserts to efficiently store HeroQuest base game and Frozen Horror expansion - it all fits into one box. UPDATE: totally unplanned surprise- the Heroquest dice tower also fits in the box. HeroQuest Dice Tower by anchorless_81 -…
Print approx. €5.16–€6.31 excl. taxPreliminary estimate for PETGSource material: PET
Inserts for the Sortimo L-Boxx Mini. These inserts are intended to be used as two layers in per box. The upper inserts fit the lid tightly, ensuring that even small parts don't move when the L-Boxx is turned upside down and shaken. Yes, I…
Print approx. €2.99–€3.65 excl. taxPreliminary estimate for PETGSource material: PET
NOTE: This is a part to be used with other Skadis mounting projects and doesn't do much on its own. This is a simple hook for mounting things to Skadis pegboards. These hooks use M2.5 screws, which can screw into M2.5 heat-set inserts.…
Print approx. €0.08–€0.10 excl. taxPreliminary estimate for PETGSource material: PET
The original design didn't fit my shelves, it was to loose. I redesigned it and reduce the radius of the curve in other to make it more tight.
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Hey folks! In my quest to find the perfect way to mount popular drawer organizer for screws, I stumbled upon an idea that turned out to be a game-changer – and I'm thrilled to share it with you all. Introducing my custom-designed…
Print approx. €1.59–€1.95 excl. taxPreliminary estimate for one variant
This print helps you neatly organize the elements of Beyond the Sun , a Rio Grande game. It consists of: A card tray with card separators A player boards tray (stores as well other elements) - Wide part, I have added two files to print it…
Print approx. €4.53–€5.54 excl. taxPreliminary estimate for one variant
Low profile DIN rail mount with support for M3 heat set inserts.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for one variant
Drawer inserts for Printer Drawers For Ikea Lack Table by SolidWorks Maker . I made inserts for: Drawer 1 Drawer 2 (same a Drawer 1) Drawer 4 (thanks CowboyWillT for the drawer dimensions) Drawer 5 Drawer 6 Note: Let me know if you need…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
Stylish 3-piece organizer perfect for offices, bathrooms, kitchens or wherever else is needed. Several options are included for the base and the stem to allow a custom solution that fits your needs. Example show utilizes the 5 hole stem…
Print approx. €1.89–€2.31 excl. taxPreliminary estimate for one variant
Siehe auch dieses Modell Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. So können Einschmelz-Gewindeeinsätze rechtwinklig in Bauteile montiert werden. Es ist kein Support zum Druck nötig. Bei dem Spanner darauf achten, wo der…
Print approx. €6.54–€7.99 excl. taxPreliminary estimate for PETGSource material: PET
Skadis holder for 20.5mm diameter (or smaller) flux syringes (x3), 16.5mm diameter (or smaller) flux pens (x4) with extra slots/spaces for storing various other soldering tools. Most desoldering pumps fit into the syringe spaces just fine…
Print approx. €22.67–€27.70 excl. taxPreliminary estimate for PETGSource material: PET
Thanks to gurnarok to supply STEP files for his model, I was able to alter the holes in the bottom to accommodate M3 threaded inserts and add a hole in the top for a 40mm fan.
Print approx. €1.47–€1.80 excl. taxPreliminary estimate for one variant
I made these boxes for my own drawers based on my kitchen utensils, specially the knifes that I modeled to fit my specific set of knifes (Brand: Tramontina). As a starting point I generated the gridfinity boxes using an onshape template…
Print approx. €10.14–€12.39 excl. taxPreliminary estimate for one variant
The lid insert has a holder for brass inset adapter ( this one https://de.aliexpress.com/item/1005006503495825.html ) and needs two 6x3 magnets. Step and f3d file included. PART_ files contain the parts only, SLICER_ files include parts…
Print approx. €5.43–€6.64 excl. taxPreliminary estimate for one variant
Skadis holder for common calipers, remixed from Printuin's caliper holder in his excellent Skadis Mount Collection to use heat-set inserts for mounting instead of integrated pegs. This model requires M2.5 heat-set inserts, M2.5 screws,…
Print approx. €0.97–€1.19 excl. taxPreliminary estimate for PETGSource material: PET
Skadis holder for standard sized (220mm x 120mm x 75mm) glove dispenser boxes. Slightly overengineered to aid in easy, reliable, and rapid repositioning to fit different workspace needs. This model requires M2.5 heat-set inserts, M2.5…
Print approx. €1.85–€2.26 excl. taxPreliminary estimate for PETGSource material: PET
Multiple size ring inserts for Craftsman router table with 2 inch opening.
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for PETGSource material: PET
Dies ist ein Werkzeug zum Einspannen eines Lötkolbens. Damit können Gewindeeinsätze rechtwinklig in Bauteile eingebaut werden. Wenn der Druck korrekt ausgerichtet, wird keine Unterstützung benötigt (siehe 3mf-Dateien). Die…
Print approx. €4.50–€5.50 excl. taxPreliminary estimate for PETGSource material: PET
Simple Skadis holder for solder and desoldering wick spools with 18mm+ internal diameter. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for PETGSource material: PET
These are plastic inserts for your cardboard tokens, compatible with the 2021 version of Tyrants of the Underdark.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for one variant
You can donate here: https://www.paypal.com/donate/?hosted_button_id=BTTC6BR69RRAL Vyrobil jsem si tuto krabičku na ukládání různých věcí. Dá se použít jen samostatně, k uložení větších předmětů. Nebo si pro ukládání menších věcí můžete…
Print approx. €2.51–€3.07 excl. taxPreliminary estimate for one variant
📦 Prusa Tool Box Inserts – Secure Sorter 🧰 Keep your Prusa accessories organized and secure! These two custom inserts are made for the Prusa Tool Box V2 , compatible with MK4S, MK4, XL, MK3.9, MK3.5, MK3, Mini+, and Mini printers. They…
Print approx. €3.43–€4.19 excl. taxPreliminary estimate for one variant
Edit (11/24) - Made a version with tighter tolerances, glueing shoud not be required anymore with this one. You can pick version for yourself (depending on a 3D printer and settings). These things can be inserted into the phone stand to…
Print approx. €0.09–€0.12 excl. taxPreliminary estimate for one variant
Box insert for 2021 HeroQuest Mage of the Mirror expansion. This is meant to be used along side HeroQuest 2021 and Frozen Horror box inserts by Atree so that the Base game, The Frozen Horror and Mage of the Mirror expansion fits into one…
Print approx. €4.65–€5.69 excl. taxPreliminary estimate for one variant
Skadis holder for two Pinecils and a Hakko 899 tip cleaner, with a bonus tiny platform that can hold a Miniware MHP30 mini hotplate. Nice companion for mounting below the Skadis Pinecil tip holder: https://www.printables.com/model/287843…
Print approx. €10.02–€12.25 excl. taxPreliminary estimate for PETGSource material: PET
Lettering inserts for your LCD cover. Print instructions Printed in PLA with dual colors. I printed each letter individually then used a tooth pick and Gorilla Gel superglue to line the cavities then carefully insert the letter and fix…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Simple Skadis holder for eight Pinecil or TS100 type soldering iron tips with bonus top pocket and tiny right-side oval slot for a bit of additional storage. Nice companion for mounting above the Skadis Pinecil holder/soldering station:…
Print approx. €9.09–€11.11 excl. taxPreliminary estimate for PETGSource material: PET
This is a set of inserts to organize the many elements of the Messina 1347 board game, from Delicious games. No special instructions for printing, I set the fill at 15% to make it lighter. Print four units of the player tray and lid.
Print approx. €3.14–€3.84 excl. taxPreliminary estimate for one variant
Overture Paper Spool Inserts are used to keep the paper dust that is created when the roll turns. They are small and easy to fit. When printing I made mine at 101.75 scale and that was the best size for me. I would not suggest below 101…
Print approx. €0.81–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Simple Skadis holder for common 61.5mm diameter solvent squeeze bottles. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5 heat-set inserts CNC…
Print approx. €6.33–€7.74 excl. taxPreliminary estimate for PETGSource material: PET
This is the newer improved version of my 1911 Pistol Lighter, it's designed to use Heat-Set Inserts. You're gonna need: 5x M3 Heat Set Inserts and M3x12 Screws 4x M4 Heat-Set Inserts and M4x10mm Screws Originally printed on a Prusa XL I…
Print approx. €11.87–€14.51 excl. taxPreliminary estimate for one variant
Simple Skadis holder for six small hookup wire spools, like the ones included in Adafruit's basic Hook-up Wire Spool Set . This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks for mounting and an additional 4x M2.5…
Print approx. €1.48–€1.81 excl. taxPreliminary estimate for PETGSource material: PET
Simple Skadis holder for common 60mm diameter solvent pump bottles. This model requires M2.5 heat-set inserts, M2.5 screws, and printed hooks. Required Parts Printed hooks See linked project for more details M2.5 heat-set inserts CNC…
Print approx. €4.98–€6.08 excl. taxPreliminary estimate for PETGSource material: PET
Looking for a bracket to replace the power supply, I came across a nice hughs project “Prusa Bear PSU Replacement Brace” However, I wanted to give it some shine :) So I redrawn it in Fusion360, replacing the rounding with chamfers and…
Print approx. €1.23–€1.51 excl. taxPreliminary estimate for PETGSource material: PET
A model of the flare from Deep Rock Galactic. The model has several components that can be printed in different colours. Additional Required Parts: ESP32 DevBoard “TTGO T-Energy T-18” or similar “18650 Battery" for the DevBoard “WS2812…
Print approx. €3.74–€4.57 excl. taxPreliminary estimate for PETGSource material: PET
I got a Dremel 723 box with lots of attachments. I saw the indjection muldet inserts that were wasting realy much space. After about 3 hours of designing and 4 hours of printing i had my inserts and was able to free up 2 of the 8…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for one variant
Skadis holder for small-sized Kimwipes boxes, which are typically 120mm x 120mm x 75mm in size. Designed around the dimensions of Kimwipes part number 34155 . Slightly overengineered to aid in easy, reliable, and rapid repositioning to…
Print approx. €0.94–€1.15 excl. taxPreliminary estimate for PETGSource material: PET
Wall mount for turning inserts boxes with max size of 42mm x 12 mm > Print materiel used: Filament PM Black PetG. > Support: No support needed > Infill: 15% Gyroid.
Print approx. €7.55–€9.23 excl. taxPreliminary estimate for PETGSource material: PET
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (AP2 Style)! The model is not perfect, but it is better than the Weller version if you have an AP2 adapter I can't remember how much it weighs and how long it takes…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for one variant
Turn your workbench into a professional station! This multifunctional 3D stand is perfect for installing threaded inserts, soldering work, and micro-drilling. Ideal for those who want practicality, organization, and a flawless finish in…
Print approx. €8.52–€10.41 excl. taxPreliminary estimate for one variant
I like the way it looks with both the long ones and the dot at the end, but if you just want to stop the ringing, you only need to use one (1) of the long ones. I don't own any other squid balis, so I don't know if it's compatible with…
Print approx. €0.31–€0.37 excl. taxPreliminary estimate for one variant
Two very simple inserts/organizers for the One Night Ultimate franchise. Both models work great for all of One Night Ultimate Werewolf/Daybreak/Vampire/Alien/Super Villains/Bonus Roles as well as Super Heroes. The “with-sleeves” model is…
Print approx. €4.11–€5.02 excl. taxPreliminary estimate for one variant
Skadis mount for CNC Kitchen heat set insert kit and TS100/TS101 adapter. Upper hooks require support.
Print approx. €1.25–€1.53 excl. taxPreliminary estimate for PETGSource material: PET
Deutsch: Dies sind nur die Dateien für die Einsätze, die Dateien für die Box selbst sind vom Original zu nehmen. Einlage-AAA.stp und Einlage-9V-AAA.stp werden verwendet, damit alle Batterien dieselbe Höhe haben in der Box. Ich habe den…
Print approx. €0.17–€0.21 excl. taxPreliminary estimate for one variant
These are files for inserts for the boardgame Rococo by Matthias Cramer, Louis Malz and Stefan Malz from the companies eggertspiele and Eagle Games. The inserts are for the 1st edition game and include space for the Jewelry box expansion…
Print approx. €2.83–€3.45 excl. taxPreliminary estimate for one variant
These are a few elements to organize the elements from the The Estates board game from Capstone games. Please note : this model is valid for the second edition (thanks @MalachiBrown_411299 for the heads up) The elements are the following:…
Print approx. €8.40–€10.27 excl. taxPreliminary estimate for one variant
A simple set of board game inserts for the Mille Fiori board game, so it is easier to put away, play and keeps the parts tidy. The board game box does not need modifying to fit these inserts into the box. The instruction booklet and…
Print approx. €5.32–€6.50 excl. taxPreliminary estimate for one variant
This is part of the "System 58" collection of sorting boxes. These boxes can be used standalone as a simple small box with a lid or they can be used as basic inserts for the bigger hinged boxes of this system. These are four variants of…
Print approx. €0.77–€0.94 excl. taxPreliminary estimate for one variant
Added an angle to the front bins for clearance and a big curve inside for easy access.
Print approx. €7.16–€8.75 excl. taxPreliminary estimate for one variant
This design is suitable for iPhone models 6S, 7, 8, SE 2nd generation and SE 3rd generation as they share a similar design and dimensions of their cases. All butons and cameras are accessable. For a perfect fit you should use a phone case…
Print approx. €0.94–€1.14 excl. taxPreliminary estimate for one variant
Remix of Wurflie's amazing design, the big box I brought had 24 tiles for the inns and cathedrals expansion
Print approx. €1.29–€1.58 excl. taxPreliminary estimate for one variant
use PETG or ABS carefuly check position for mounting, details of position on pistures are important. In case of wrong assemby it will not work double adhesive side tape can help to have better fixation on trucks
Print approx. €0.75–€0.92 excl. taxPreliminary estimate for PETGSource material: PET
Background: I have a CurrentRanger from lowpowerlab , which came with a case. Unfortunately I both lost the screws that hold the lid to the case, and the screws screw into somewhat flimsy looking plastic holes directly, which I was not a…
Print approx. €1.50–€1.83 excl. taxPreliminary estimate for one variant
A simple set of board game inserts for The Crew: Mission Deep Sea board game. The board game box does not need modifying to fit these inserts into the box. The instruction booklet on top of the box ensures all the parts are secure and…
Print approx. €4.62–€5.64 excl. taxPreliminary estimate for one variant
Another remix of the inset for the "Precision screwdriver case" by TimATX
Print approx. €2.38–€2.91 excl. taxPreliminary estimate for one variant
I wanted to purchase some more seed tray inserts made by Stuart, only to find that they have discontinued them. 3D printing to the rescue! The inserts are 205mm long and 72mm wide and you can fit five of them into a standard propagator…
Print approx. €4.36–€5.33 excl. taxPreliminary estimate for one variant
These new Next Gen (NG) Organizers are Hyper Tough branded ones from Walmart and recently sell for $10.44 (2-Pack). Here is the link Hyper Tough Organizer The bins are numbers starting in the back left and working right & forward. Part 1…
Print approx. €5.72–€6.99 excl. taxPreliminary estimate for one variant
This part was created for a C245 soldering iron handle and a Wabeco drill stand to press heat inserts in printed parts. Internal diameter is 11mm, when printed in PLA I had a perfect fit right away, however PLA will conform to the…
Print approx. €2.13–€2.61 excl. taxPreliminary estimate for one variant
The attached model was created to mount 10" Haul Master pneumatic tires to the legs of a pizza oven table and a gardening table using ¾" EMT conduit with Maker Pipe threaded inserts. The plate is designed to use 3/8"-16 bolts both through…
Print approx. €3.93–€4.80 excl. taxPreliminary estimate for one variant
Simple organizer insert with dimensions of 50mmx100mm or 2"x4". I downloaded EB Garamond which looks particularly nice in bi-color. I added a layer change about half-way up (see attached GCode) and put some of the common organizer labels…
Print approx. €1.64–€2.00 excl. taxPreliminary estimate for one variant
EN: The original model was modified to store a collection of diamonds of 0.4 to 0.5 carats. The box can hold exactly 3 plates, each with a maximum of 12 diamonds. Some plates can be replaced with the included spacers if necessary.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for PETGSource material: PET
All printed in PLA with color change. No AMS was used. 15% infill, 0.2mm layer 6x3mm magnets may or may not be used in the resourse card racks after printing to hold them together. Everything fits in the box with no lid lift. The metal…
Print approx. €1.28–€1.56 excl. taxPreliminary estimate for one variant
This is part of the System 58 collection of boxes. They are designed as inserts with non-standard sizes, but can also be used as stand-alone boxes with or without lids. Other parts of the System 58 collection:…
Print approx. €1.00–€1.22 excl. taxPreliminary estimate for one variant
These elevated support legs are designed to raise the Spool Tank and improve overall stability during use. Each support includes five dedicated recessed slots for rubber anti-slip pads, ensuring a secure grip on smooth surfaces and…
Print approx. €1.36–€1.66 excl. taxPreliminary estimate for PETGSource material: PET
I widened the gap on the dockmount becuase I find the hammerhead nuts frustrating to use compared to roll-in T nut. Print at same orientation as original model (on side), add supports. There's a version with and without the spot for the…
Print approx. €0.83–€1.02 excl. taxPreliminary estimate for one variant
When I added a hexagonal mesh to the Voron's skirts, I also wanted that look and the added protection for the fan grills. So I designed this model to fit my needs: Provide a sturdy mesh that won't break accidentally Modular to play around…
I wanted the nice mesh-style look for the skirts of my Voron 🥰 but without reprinting the complete skirts and especially without “meshing” with the slicer 😉. So I designed these plug-in mesh inserts which besides the awesome look also…
Hello all, here you can find a set of different inserts for an IKEA ALEX & MALM office cabinet . I love to organize and have been inspired by Alexandre Chappel in the creation ( Youtube ). He created the inserts for his homemade drawers,…
This is a remix of the Z-motor mount for the Prusa CORE One 🥰. The key improvement is the addition of heat set threaded inserts in place of the original design that required the M3 bolts to thread directly into the printed plastic. Key…
3D print or lasercut pegboard and insert base. you can also use the insert baseplates as universal mount to glue or screw on already existing original tool holders like bit holders, drill sets and stuff. the insert base is designed for a…
This is set of various inserts which fit into a standard Altoids tin (inner size ~90 x 55 mm). You can choose the layout to fit your needs. They can be used to store bolts and nuts, pills and other small components or for example as an…
remote holder update · added STLs with different sized inserts for fit and color photos show printed in matte black pla and matte beige pla 0.20mm layer height 15% adaptive cubic no brims or supports note > this model comes in two plates,…
Trying to stay organized as you explore and conquer Catan? Unsatisfied with the wasted space on the factory inserts and having to store everything in multiple boxes? Try these inserts designed to make setup, play, and storage a little…
Print your own case for the CNC Kitchen Threaded Inserts Soldering Tips (M900 Style)! UPDATE: All NEW cases available here: https://www.printables.com/@CNCKitchen/collections/2867288 Update 2023-08-13 Added case for V2 tip with easy-grip…
This model gets a few downloads, I would love to see your end product, please post it as a make, it may motivate me to make upgrades or mods. Thanks! Overview The idea behind this case is to be simple to print in terms of setup, required…
Put simply - So easy to remove they fall out. UNTIL you put something into them, then so tight they might even hold tighter than the original design. How? Magic of course. The inserts for attaching to the wall also have the same cuts to…
Needed a small tackle box to organize fishing gear. I really didn't need my full tackle equipment for every fishing trip. Made these two tray inserts with nesting hinges that fit perfectly in standard Altoids tin. Used 8 M2x6 screws for…
Get the CAD and STL models of our inserts, to use them in your designs! Purchase original CNC Kitchen Inserts in our store CNCKitchen.STORE , at Prusa, or at a ton of resellers ! Get suitable soldering iron tips at CNCKitchen.STORE , at…
Plugs for original wall-attaching inserts can be rotated while pushed into the inserts. And I didn't like it at all :) So I designed a version that will always be in the correct position. Designed for ~4 mm diameter countersunk screw.…
Also uploaded my 2 x 1 size inserts: https://www.printables.com/model/672541-gridfinity-1-x-2-size-inserts-can-be-closed-indivi [Update 2024.01.01] Added new parts upon request: 1 x 1 x 4, 1 x 1 x 6 and 1 x 1 x 8 Gridfinity inserts with…
Modular Corner Jig with option of changing corner Radius Inserts. How it works? Very simple! Just choose insert with needed Radius, put it together with Main Jig Body and secure the insert with a Lock screw. Main Body has a threaded hole…
The rugged box and inserts are based on my parametric “ Rugged Box ”. The size of the inserts (and box) can be modified in Fusion 360 (f3d file available in the files section). You can increase the “InsertDummies” parameter to add…
I really liked nobodyinperson 's idea.. I didn't like that the notches were visible and decided to make my own remix. CONCEPT The concept is as follows (for those who are seeing this for the first time): The insert is slotted in 6 places…
03-01-2023 small update Added some pictured to display that Watch holders are optional and some of the assembly. ----------------------------------------------------------------------------------------------------- Drawing inspiration…
Corner radius router jig with changeable inserts. Can be clamped to the work piece to use with a handheld router. The base is design to accommodate track saw clamps (slots for the clamps are 12mm wide, 7.5mm deep) Inserts are available in…
IMPORTANT NOTICE: This model was made for the previous version of Tony Youngblood's Dragon Egg. This is not (yet) compatible with the updated 2025 version; Tony has kindly re-released the older version, clearly labeled as “old”. I'm…
A practical and flexible storage system consisting of stackable boxes in three different sizes, created to bring order and clarity to everyday spaces. Each box follows the same clean geometry, allowing all sizes to stack securely and…
For better utilisation and stuff organisation of space in Ikea Alex drawer. Print instructions Print settings: First layer height 0.25 Layer height 0.25 (only joints printed wit layer height 0.15) Minimum travel after retraction 0
7x Blank box OR Fraction boxes 1x Bank 1x Box HIGH 3x Box LOW 1x Small cards
3D printed holes often turn out too small, which can make installing heat-set inserts a bit tricky if the pilot end doesn't fit the hole. These blocks are designed so you can determine the right diameter to use in CAD, ensuring that your…
These are literally just the original insert-hollow-for.stl [sic] duplicated, rotated and aligned by eye in PrusaSlicer exported as an STL. I needed them for connecting the pieces of my Honeycomb-Honeycomb Storage Wall variant.
I've worked on two editions of remix of the excellent push block design by Trobinou (January 23, 2017). One of my remixes does not make use of threaded inserts, while the other (this one) does. (I have not yet posted the…
This is the second set of various inserts which fit into a standard Altoids tin (inner size ~90 x 55 mm). You can choose the layout to fit your needs. They can be used to store bolts and nuts, pills and other small components or for…
These are inserts Gridfinity organizer bins for: Milwaukee Packout Low Profile Organizer Milwaukee Packout Low Profile Compact Organizer 2025-10-08 Updates - Added new base plates that no longer require trimming and will fit in the Low…
This is a remix of the fivesixzero's Case for Flipper Zero Wi-Fi Module to use it with Ruthex M2 threaded inserts and M2 screws instead of M3 screw + nut. The screws needed are M2x7mm. I also made a version with the Marauder Skull logo on…
