Search results: raspb

Sort order

7,198 models

P
PrintablesSneaks

Modular Snap Together Raspberry Pi 2B/3B/3B+/4 Case w/ OLED & Fan Options

Compatibility: This case design is compatible with Raspberry Pi's 2B/3B/3B+/4. It may be compatible with other models, however, these were the ones I was personally able to test it on. Two Top Depths: (01/06/2022) The top half is now…

Downloads
22,651
Likes
5,392
Rating
4.92
P
PrintablesPrusa Research

Raspberry Pi Zero frame for Einsy Rambo

For Raspberry Pi Zero W so you can use Octoprint with your MK3/MK3S/MK3S+ printer. https://help.prusa3d.com/en/article/raspberry-pi-zero-w-preparation-and-installation_2180 If you prefer a step-by-step guide, it is available here:…

Downloads
14,270
Likes
609
Rating
4.89
P
PrintablesMalolo

Malolo's screw-less / snap fit Raspberry Pi 4 Model B Case & Stands

Please note: This is an adapted version of my Raspberry Pi 3 case ( https://www.prusaprinters.org/prints/4038-malolos-screw-less-snap-fit-raspberry-pi-3-model-b ) that I modified to fit the Raspberry Pi 4. I do not yet own the Raspberry…

Downloads
12,754
Likes
2,248
Rating
4.96
P
PrintablesMarius

Slim Raspberry Pi Zero W Case

24.05.2021 update: case was designed for the raspberry pi zero W, it will not fit the older raspberry pi zero (different SMD board layout). a remixed version that will fit the old pi zero and also adds cut outs for the pin header can be…

Downloads
8,744
Likes
1,066
Rating
4.85
P
PrintablesRobert

19" 1U Rack with Moduler trays for Raspberry Pis

This is a 1U Server Rack rack/shelf designed initially to rack mount a bunch of Raspberry Pis. Each 1U shelf should hold up to six Pi 0/3/4/5 or some mixture with accessories. Every attempt is being made so that no supports should be…

Downloads
5,141
Likes
826
Rating
4.84
P
PrintablesINUX3D

The TerraPi X , Prusa Edition - Single SSD Case for Raspberry Pi (all models)

This special Prusa Edition of the TerraPi SSD Case for the Raspberry Pi is to celebrate the 2 year anniversary of the release of the original TerraPi SSD case. The model prints without supports in under 2.5 hours. Best used materials are…

Downloads
3,679
Likes
874
Rating
4.81
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount

Raspberry Pi Camera Module V2.1 8MP Mount for Prusa Mini and Mini + and OctoPrint. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. UPDATE: I have added another version with X…

Downloads
2,106
Likes
685
Rating
4.81
P
Printablesdimo414

Slim Raspberry Pi Zero W2 Snap-fit Case

Marius' really nice Zero W2 case model only comes with a screw-fit back, whereas their Zero W case comes with either snap-fit or screw-fit backs. I tried using the back from the latter model but the pegs were slightly too large (~2.4mm).…

Downloads
1,848
Likes
266
Rating
4.77
P
PrintablesTronnic

Raspberry Pi 3 Case for Pi & Buck Converter - Direct Prusa i3 MK3 attachment

I was looking for an Raspberry Case that could fit the Pi and a Stepdown (Buck) Converter to power the Pi directly from the power supply of my MK3S. I couldn't find anything I like so I decided to create my own. I designed 2 versions of…

Downloads
1,731
Likes
173
Rating
4.96
P
Printablesthe freewheeler

Raspberry Pi Z-Box | Integrated 4B Case for Prusa MINI

RPi 'Z-BOX' The RPi Z-Box, designed for the 4B, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…

Downloads
1,549
Likes
411
Rating
4.71
P
PrintablesShay

Raspberry Pi Zero 2 W frame for Einsy Rambo

A remix of Libang's Raspberry Pi Zero 2 W frame. https://www.prusaprinters.org/prints/85119-raspberry-pi-zero-2-w-frame-for-einsy-rambo Which is in turn a remix of the original Prusa Raspberry Pi Zero W frame.…

Downloads
1,422
Likes
138
Rating
4.94
P

Raspberry Pi 5 Case (customisable)

This is a press-fit Pi 5 case, with customisable options for vents and ports, that also supports the optional active cooler. V1.1 has more tolerant clearances, less crush ribs and a slight taper to the longer pins. V1.2 has no specific…

Downloads
1,394
Likes
69
Rating
5
P
Printablesthe freewheeler

Raspberry Pi Z-Box | Integrated 3B/3B+ Case for Prusa MINI

RPi 'Z-BOX' The RPi Z-Box, designed for the 3B & 3B+, is the first integrated case for the Raspberry Pi that attaches seamlessly to your Prusa MINI/MINI+. The Z-Box attaches at the base of the z-axis and replaces the lid of the stock…

Downloads
1,348
Likes
261
Rating
4.9
P
PrintablesTinkrMakr

Prusa Mini (Mini+) Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief

Prusa Mini and Mini + Raspberry Pi Camera Module V2.1 8MP Mount With X Axis Strain Relief. The mounts I could find did not give me the angle that I wanted. I like to have a clear view of the nozzle. Added x axis strain relief to…

Downloads
1,179
Likes
287
Rating
4.97
P
PrintablesINUX3D

TerraPi EVO Dual SSD Case for Raspberry Pi 3 & 4

The TerraPi EVO is a dual SSD case for the Raspberry Pi, that uses the 2.5″ sata SSD drives as the case, placing the Pi board between the disks. It comes only in dual SSD drive configuration. It utilizes the USB 3.0 port to connect a…

Downloads
1,165
Likes
211
Rating
5
P
Printablesthe printed cow

Retro Raspberry Pi 5 Case (snap fit)

A retro case that's simple and functional. Designed for use with pi's active cooler. I was aiming for a retro, Art Deco vibe, and also tried to capture the classic look of an RTX or Radeon reference GPU. Print Instructions: Settings: ~38g…

Downloads
1,001
Likes
128
Rating
4.89
P
PrintablesKH

Raspberry Pi 3 case Rack Mounted (1u) UPDATED

About Yet another Rpi case! I needed a simple rack mount case that did not take a million years to print, so I designed this. My pi3 is running pihole and the ubiquity controller software. Both of these apps are lightweight. Because the…

Downloads
936
Likes
109
Rating
3.86
P
PrintablesRojikku

Raspberry Pi Touch Display 2 Case

A nice case for your 7" Raspberry Pi Touch Display 2 (https://www.raspberrypi.com/products/touch-display-2/ ) and a Raspberry Pi. Features easy access to the USB and Ethernet ports. Designed to use the M2.5 x 6mm screws included with the…

Downloads
915
Likes
42
Rating
4.5
P
Printablespedrolamas

Raspberry Pi Zero 2 W screwless slim case

Just a slim screwless case for the Raspberry Pi Zero 2 W

Downloads
885
Likes
82
Rating
4.92
P
PrintablesMaxTechTV

Snap fit case/box for Raspberry Pi Camera Module v2

This is a lightweight and easy to print case I designed for the Raspberry Pi Camera Module 2. It snaps together and can be separated again. It has a GoPro compatible mount. No supports are needed for the print. It has successfully been…

Downloads
816
Likes
39
Rating
5
P
PrintablesSpeakingOfBrad

Raspberry Pi Zero/Zero2 frame for Einsy Rambo

This is a remix of the Raspberry Pi Zero frame for Einsy Rambo by Prusa Research . The original only fits the Raspberry Pi Zero, but this frame fits Raspberry Pi Zero W as well as Raspberry Pi Zero 2 W. (The Zero 2 has components in…

Downloads
676
Likes
79
Rating
5
P
PrintablesLV3D

Raspberry Pi Zero 2 W frame for Einsy Rambo V2

Remix of original frame for new Zero 2 W. New Zero 2 W have slightly different placed components. Updated model to V2. No need to use remix.

Downloads
663
Likes
51
Rating
5
P
PrintablesJascha3D

Raspberry Pi 5 Case - Modular Snap Together

Rasperry Pi 5 Case - Modular Snap Together This is a remix of the excellent "Modular Snap Together Raspberry Pi Case" by Sneaks , originally designed for the Raspberry Pi 3B+ and Raspberry Pi 4 . I've updated the design to make it fully…

Downloads
615
Likes
59
Rating
5
P
PrintablesGolden4

Raspberry Pi 4 Playstation case

The Top and the Logo can be printed together with a MMU. Added a rear fan grid intake. Added 2 screws on the bottom Added a square hole to allow the raspberry camera cable to go trough it without being damaged by the usb ports This model…

Downloads
555
Likes
115
Rating
5
P
PrintablesDaHouzKat

Prusa MINI Articulated Raspberry Pi Camera Mount REMIX

This is a REMIX of the Articulating Raspberry Pi Camera Mount for the Prusa Mk3 Note that i did not modify or create new components, i assembled some components together to obtain a simple Raspberry Pi Camera Mount for the Prusa Mini Thx…

Downloads
554
Likes
132
Rating
4.97
P
Printableszethos

Stackable Shelf for Raspberry Pi Argon One V2 or Other uses

I needed a way to stack my Argon One V2 cases for Raspberry Pi 4s. I didn't really find anything that fitted my needs so decided to design one. This is my model that I've designed and made available. You can print as many of the…

Downloads
513
Likes
73
Rating
5
P

Real Bolts (For Articulating Raspberry Pi Camera Mount)

First up, the articulating camera mount is a great piece of design, the sheet number of remixes and additions that have been released shows how popular the design is. However, I have found that the printed threads on the nut and bolt for…

Downloads
487
Likes
112
Rating
4.59
P
PrintablesRonnyS

Raspberry Pi 4 case, VESA mount, internal fan

Case for a Raspberry Pi 4 Features VESA mount (75mm x 75mm) Internal fan mount (40mm x 40mm x10) - optional Thread inserts (case and pi mounts) Footer pins - optional Required parts Raspberry Pi 4 Optional parts Fan 40x40x10, 5V → Noctua…

Downloads
479
Likes
40
Rating
5
P
PrintablesMauro

Octoprint - Raspberry Pi3 case with internal Noctua fan

update 02.06.2020 I corrected files in the download section. Now they are correctly a cover and a bottom, and not just two covers. Thanks to David Ewen for letting me know ! __________________________________________ This is an…

Downloads
475
Likes
69
Rating
4.5
P
PrintablesRonnyS

Raspberry Pi 3 (B/B+) case, VESA mount, internal fan

Case for a Raspberry Pi 3 (B/B+) Features VESA mount (75mm x 75mm) Internal fan mount (40mm x 40mm x10) Thread inserts (case and pi mounts) Footer pins optional Required parts Raspberry Pi 3 (B/B+) Fan 40x40x10, 5V → Noctua NF-A4x10 5V…

Downloads
453
Likes
63
Rating
5
P
PrintablesMuldjord

Raspberry Pi 5 NVMe case (with Pimoroni NVMe Base board)

This case was designed to house a Raspberry Pi 5, the Pimoroni NVMe Base and an optional official RPi Active Cooler. It is a 3-part print: The bottom of the case The lid of the case The power button Holes have been added in several places…

Downloads
448
Likes
37
Rating
0
P
Printablesglowen

Raspberry Pi 4 Mounting Bracket for Prusa MK3S

My goal was to make a mounting bracket for the Raspberry Pi 4 that fastens to an MK3S which would look like an OEM part / accessory for the printer. My Pi 4 has an aluminum Pimoroni heatsink case as I liked the idea of the case being a…

Downloads
444
Likes
64
Rating
5
P
PrintablesCaptainAl

10inch 1U Raspberry Pi with SSD 2.5" rack mount (3 raspberry pi modules and 3 SSD)

Simple and helpful 1U Raspberry Pi with SSD 2.5" rackmount for 10inch network cabinets. It supports 3 Raspberry Pis. How to print: Print with 0.30mm layer height and 70% gyroid infill. Make sure your print is in PETG , ASA , or…

Downloads
415
Likes
56
Rating
4
P
PrintablesMartinRowan

3U Modular Rack for ZimaBoard, Raspberry Pi, SSD, HDD, PCI cards and more

Please note this design should be considered a BETA , I'm still making some tweaks for the following: Improve all hangers to make latching less stiff Improvements to PCIe hanger. Modular 3U Rackmount for ZimaBoards , to be co-located with…

Downloads
408
Likes
98
Rating
4
P
Printablespedrolamas

Raspberry Pi Zero 2 W screwless slimest case

Just a really slim screwless case for the Raspberry Pi Zero 2 W

Downloads
374
Likes
40
Rating
5
P
PrintablesHD_Creator

RaspberryPi 4 reference model for housing designs

I was designing a housing for a RaspberryPi 4 and wanted a simple reference model to design the housing around, so I created this. For me it worked great, the real RaspberryPi 4 board did fit like a glove to the designed housing which is…

Downloads
374
Likes
21
Rating
0
P
PrintablesFalco

Raspberry Pi4

Prusament Galaxy Black. PETG 0.20. 15% Infill: (Gyroid). Nozzle 250c. Bed 90c. Support : None.

Downloads
288
Likes
41
Rating
4.83

stable Diamant Edition Case/Box incl. Stand for Raspberry PI 3b with applied 3.5" LCD Display (plus option for fan or sensehat)

Vor- und Nachteile auf einen Blick: + maximal große Lüftungslöcher, mit Schutz vor Kleinteilen wie M1.5 Schrauben + LCD Display verwendbar (Sense HAT und 30 bis 50 mm Lüftervorbereitung nicht getestet) + Kamera und Displaykabel über…

Downloads
281
Likes
28
Rating
0
P
PrintablesSorp2005

Raspberry Pi 3B+ CAM Rover with arm

This is a remix of the Rover . I made the model so it can fit a raspberry pi 3b+, a raspicam model 3, a servo HAT and a dc Motordriver. This Model Provides all files needed. There are two python files, which need to be loaded to the…

Downloads
277
Likes
67
Rating
0
P
PrintablesSorceress Lyra

Prusa Mini x-axis motor Raspberry Pi camera mount

I wasn't happy with many of the camera mounts for the Prusa Mini, so I designed one that I love! The camera is mounted on the x-axis motor with a customizable angle to suit your needs. The design is simple with 4 printed pieces and a…

Downloads
259
Likes
47
Rating
4.8
P
Printablesangato

Raspberry Pi Pico Open Remote Control Walking Robot

I tried to make a robot that everyone can enjoy. 3D Data, How to Make, and Code are open to the public. You can put it together with parts that cost around 7000 Japanese yen (70 US dollars at ¥100/$, excluding PLA filament). The power…

Downloads
252
Likes
48
Rating
0
P
PrintablesPoint3333

Raspberry Pi Pico Case

A simple, quick-to-print clip-case for a Raspberry Pi Pico. Something of an experiment/work-in-progress, the design uses a captured nylon mesh (more fun with flyscreen offcuts) to hold the reset button in place during assembly. See the "…

Downloads
238
Likes
19
Rating
5
P
PrintablesUko

Raspberry Pi Pico Soldering Rack

In case you need to solder header pins to a new Raspberry Pi Pico, here is a handy rack to keep everything in place. Got inspired by this model: https://www.prusaprinters.org/prints/44141-arduino-nano-every-solder-holder

Downloads
238
Likes
51
Rating
5
P
PrintablesSam

Raspberry Pi Hi Quality Camera Case Adapter

This print is to allow the use of high quality pi cam with the articulating camera mount. This is a remix of the back of the camera case from here…

Downloads
211
Likes
27
Rating
5
P
PrintablesPillar

Raspberry Pi 4B Case with Noctua NF-A4x20 5V Fan

Rpi4B case designed to be use with a NOCTUA NF-A4X20 5V FAN Use the screws provided in the fan package to mount the fan on the Rpi Support. Use M2.5 screws to fix the Rpi on his support *Gaps in front of the fan section could be use to…

Downloads
205
Likes
25
Rating
5
P
PrintablesSimone Giordano

Raspberry Pi Camera Module 3 bed mount for MK3S

Oltre alle parti stampate avrete bisogno di 2 (due) viti a testa esagonale con filettatura M5 x 13 mm. Aggiornamento 07/09/2024 Aggiornati i seguenti files: Pi Camera Module 3 case - Front .stl Pi Camera Module 3 case - Back .stl Cradle…

Downloads
179
Likes
12
Rating
3
P
PrintablesToWcH

Raspberry Pi5 Case (Exposed Cooler)

Raspberry Pi5 case with the cpu cooler fully exposed

Downloads
177
Likes
15
Rating
5
P
PrintablesTimbroddin

Stand for Eviciv 7" touch screen + Raspberry Pi

A 45° case/stand for your 7'' Eviciv touchscreen and Raspberry Pi. This touch screen with HDMI can be found on AliExpress under a lot of different brand names. There's a lot of spacing for cables (you'll need HDMI - and USB to power the…

Downloads
170
Likes
14
Rating
4.5
P
PrintablesHawkeye

Raspberry Pi4 enclosure in the classical Apple Macintosh SE style

This is a Raspberry Pi4 enclosure in the classical Apple Macintosh SE style. In addition to Pi4, the following components are selected & installed: Waveshare 4inch square LCD ( https://www.waveshare.com/4inch-dpi-lcd-c.htm ). Geekworm…

Downloads
144
Likes
55
Rating
0
P
PrintablesMartin v R

Raspberry PI Zero 2W Casing

The original version is for a Raspberry Pi Zero 2 W with the GPIO header soldered to the “clean” side of the board. The problem I had was that if you want to connect something with the GPIO header and you want to mount it, the wires are…

Downloads
136
Likes
12
Rating
5
P
Printableswhimmel

Raspberry Pi 5 Breadboard Case

Same as the original, but with some relief for the power button.

Downloads
135
Likes
15
Rating
0
P
Printableschoucroute6790

PiKVM Case Raspberry Pi Zero 2 + HDMI to CSI bridge

A small case for Raspberry Pi Zero 2 designed for PiKVM (DIY version with rpi zero 2) You need : 1x Raspberry Pi Zero 2 ( link ) 1x HDMI to csi ( link ) 2x hexagonal spacer M2.5 x 12mm ( link ) 4x screw M2.5 Parts to print (~ 1.5h with my…

Downloads
124
Likes
10
Rating
0
P
Printablesbaumwasser

Raspberry Pi 4B Baseplate with SSD Slot

A simple baseplate for the Raspberry Pi 4B with an 2.5" SSD Holder underneath it. It requires 4x M3x5mm and 4x M2.5x8mm screws. There are 4 spacers that sit directly under the Pi. Printed without support with PLA on a Mini+, PETG might be…

Downloads
118
Likes
17
Rating
5
P
PrintablesGhezzz96

Raspberry Pi 2/3/3b+ case Creality Ender 3 LCD Enclosure

Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…

Downloads
109
Likes
9
Rating
5
P
PrintablesJiri Blazek

Raspberry Pi 4B Box (Noctua Fan variable)

Box for Raspbberry Pi 4B. You can use screws M2 8 mm. Fan is Noctua NF-A4x10 5V. Print instructions Material ASA.

Downloads
105
Likes
8
Rating
5
P
PrintablesJoerg B.

Mount für Geekworm Raspberry Pi 4 Aluminum Case

Kann mit PLA oder PET gedruckt werden. Kein Support nötig. Schraubenlöcher für M3 Zylinderkopfschrauben. Beim Mini idealerweise Nutensteine im 3030 Profil.

Downloads
94
Likes
19
Rating
5
P
Printablesheximcz

Waveshare 7" LCD / Raspberry Pi Development Holder

Printed on Ender 3 Pro. Sliced in PrusaSlicer 2.6.0 Alpha6. I used organic supports. Infill pattern grid with 25% density. LCD: Brand: Waveshare SKU: 18625 Part Number: 7HP-CAPQLED

Downloads
86
Likes
7
Rating
0
P
PrintablesHermannSW

Dual Raspberry GS/HQ camera holder/mount and stand

Started as Pan/tilt camera holder, this Dual Raspberry GS/HQ camera holder/mount (for Pi5) turned out to be good enough for tripod mount, without originally planned external holder. Use with two GS cameras (Global Shutter) is only…

Downloads
85
Likes
0
Rating
0
P
PrintablesKutilman Yuri

Raspberry Pi 4B case with 40mm fan

I made this case because I wanted simple design with 40mm fan that I would like. Please note that this assembly requires: 20mm long M3 screws or similar 40mm fan with screws and with correct connectors. Gluing if you use transparent LED…

Downloads
74
Likes
10
Rating
0
P
PrintablesReedy

Snap On Back Cover for Raspberry Pi HQ Camera Module

Import of https://www.thingiverse.com/thing:4540545 by mikelane76 . Simple print and case that works perfectly for the purpose. Had to take a little bit of the PCB off the side of the camera from where it would've been attached to an…

Downloads
69
Likes
6
Rating
5
P

Case for Raspberry Pi 4 Model B and FlightAware Pro Stick

Case for Raspberry Pi 4 Model B and FlightAware Pro Stick

Downloads
66
Likes
4
Rating
5
P
Printablesnetpaq

Raspberry Pi 3 Model A+ Snap Fit Enclosure with 3030 Extrusion Hooks

I needed a Raspberry Pi Model 3A+ enclosure for my Prusa MK3S+ OctoPrint installation. I extracted the 3030 extrusion hooks from this model and merged them with this enclosure model. There are two versions of the base, the first version…

Downloads
57
Likes
4
Rating
0
P
PrintablesmC_rOMeo

Raspberry Pi Zero 2 W modified frame for Einsy RAMBo (MK3S/+)

It is a frame for the Pi Zero 2 W to install it on the Einsy RAMBo and I added space for the full colored GPIO header w/o unneeded pins and USB&HDMI port cover to protect against shorts.

Downloads
56
Likes
5
Rating
0
P
PrintablesWarg'Name

Raspberry Pi Case stand for Prusa MK4 (Pi 3b+) that works with LED Light Bar Prusa MK4

Hi, I remixed the stand done by tritschi because after installing the excellent led light bar for prusa mk4 , it was impossible to put the case where it originally stand. Also I wanted it to be near the logitech c310 camera stand by…

Downloads
54
Likes
15
Rating
5
P
PrintablesDaHouzKat

Raspberry Pi Z-Box | Integrated 4B Case for Prusa MINI REMIX

This is a REMIX of the Raspberry Pi Z-Box Integrated 4B Case for Prusa MINI I modified the case to use it with the Prusa mini squashball back foot redo/fix (REMIX) * * note that i included the foot that goes with the case Print…

Downloads
53
Likes
23
Rating
4
P
PrintablesBenBigBeard

Hinged Box for Raspberry Pi Pico Robotic Board (kitronik)

This is a Hinged Box for Raspberry Pi Pico Robotic Board made by kitronik I ma building my own animatronic and needed a solution to not only store my pico and board, but ensure its still usable I have put together a sturdy case with the…

Downloads
53
Likes
5
Rating
0
P
PrintablesBeelsebob

Raspberry Pi HQ Camera Mount

A mount for the Raspberry Pi HQ Camera to sit inside the top of the frame looking down at the build plate. When combined with the 6mm wide angle lens, provides clear shots of the whole bed during a print. Bill of Materials 3 Printed Parts…

Downloads
53
Likes
24
Rating
0
P
PrintablesBreh

Raspberry Pi + LoRaWAN stand (SenseCap M1)

I bought both the pi and lorawan card separately for a uni project but realised together they are a sensecap m1, so it could be used as an alternative case for that too. I needed to display them for the project fair at my university so i…

Downloads
52
Likes
0
Rating
0
P
PrintablesMartin

Raspberry Pi Pico Breakout Board Holder / Trays

Breakout Board https://amzn.eu/d/1lihfyZ

Downloads
50
Likes
5
Rating
0
P

Fillament friendly Raspberry Pi 3 mount with hole for Mini-Rack Raspberry Pi Mount

This simple modified version of the RPI 3 mount has a hole on the bottom. Less filament to print without compromisring strengt Should allow for slightly better cooling

Downloads
47
Likes
6
Rating
0
P
PrintablesPat_S

Raspberry Pi 3B+ case for the Prusa MK3S (Remix) / Raspberry Pi 3B+ Gehäuse für den Prusa MK3S (Remix)

Remix of the case by dktosoch. https://www.thingiverse.com/thing:2844013 The housing now fits on top of the Prusa MK3S and can be fixed with two M3x10 screws. Happy printing! If you like this thing leave a like or post a make. I'm always…

Downloads
45
Likes
2
Rating
0
P
Printablesoltas

Box for Raspberry CM4 Computemodule on CM4-IO-Base A

Raspberry case for Waveshare CM4-IO-BASE-A module. It is possible to mount two different raspi cam modules on top of the cm4 and to use a fan and a external antenna. For modification a freecad file is provided. You can choose between two…

Downloads
44
Likes
7
Rating
0
P
PrintablesDan H

Mount for Raspberry Pi Cam v3 with HDMI Module

Model Description Mount for a Raspberry Pi Camera Module V3 with HDMI to CSI extension module to be mounted to @Sneaks ' popular articulating cam mount. Parts HDMI to CSI Extension Module Raspberry Pi Camera Module 3 Standard - 12MP…

Downloads
39
Likes
2
Rating
1
P
Printablesxanderthol

Raspberry Pi Zero Stack Plate

I made this plate to stack my Raspberry Pi zeros and zero 2s. The Raspberry Pi's can be screed down to the plate with four m2.5 screws, I used these…

Downloads
37
Likes
2
Rating
0
P
PrintablesDan Rogers

Attractive case for Eleclab 7" Rev C screen and Raspberry Pi

Here's a compact case that holds an Eleclab 7" touch screen Revision C. Since that screen is also a RPI add on, it also holds the raspberry Pi. The case and case back should be printed separately. Use snug supports to print the case, they…

Downloads
35
Likes
3
Rating
0
P
PrintablesExtra Fox

[Printer-Box] Modular Control - Raspberry Pi Back Panel

Printer-Box created a really nifty modular control panel for their enclosure and as a stand-alone option. There was one part of this I wanted to make a change to and that was the back panel meant to accommodate a Raspberry Pi. The changes…

Downloads
33
Likes
6
Rating
0
P
PrintablesChevdor

Wall Mounting plate for RaspberryPi

This is a wall mounting plate for Raspberry Pis. I needed a version that would allow passive cooling, protect from dust and look cool. This model can be easily printed in PETG or PLA with 0.3mm layers. There is enough room to take the…

Downloads
29
Likes
7
Rating
0
P
PrintablesLoon
Downloads
28
Likes
3
Rating
0
P
PrintablesGlmc89

Ubiquit rack mount, USG, Ubi Switch, Raspberry Pi

20% infill SwitchRack benötigt Stützen Es benötigt eine kleine Schraube um den Switch zu befestigen damit er beim ein- / austecken nicht verutscht

Downloads
27
Likes
5
Rating
0
P
PrintablesOpenscaddad

Raspberry Pi Bracket for Dell 1908FPc Monitor

In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a 1908FPc monitor and a 3D printed bracket that…

Downloads
27
Likes
4
Rating
0
P
PrintablesNikosSprocket

Combined rail mount for Raspberry Pi 4 and BTT U2C CAN board

There are 2 versions available; Short and Long. Depends on the space available between the BTT U2C board and the printer's side panels. Also, included an easily printable spacers to include between the boards and the rail mount.

Downloads
26
Likes
5
Rating
0
P
PrintablesScott Gibb

Prusa I3Mk3s+ Raspberry Pi 4 Case

Summary I found that my Raspberry Pi 4 was overheating when running Octoprint, so I decided to buy a heatsink to solve the problem. The one I bought is really good due to its massive case. However none of the existing cases for the Prusa…

Downloads
22
Likes
2
Rating
0
P
Printablesinvisiblefmx

SD Accessible Bottom for Modular Snap Together Case for Raspberry Pi 2B/3B/3B+

Alternate side mount bottom for Sneaks' modular raspi case. Provides easier access to SD card. Now fits RasPi 2B/3B/3B+

Downloads
22
Likes
3
Rating
0
P
PrintablesCrami

Raspberry PI 4 Holder for Prusa Enclosure

A snap on holder for a full aluminum cooling case like this one: https://www.aliexpress.com/item/1005006112061018.html Prints without Support. Recommend 3 perimeters and 20% infill. Only needs two M3 Screws and nuts to mount to the…

Downloads
22
Likes
2
Rating
0
P
Printablesaxelrafn

Raspberry Pi4 Cradle

I have a Raspberry Pi 4 with the 4" Pimoroni Hyperpixel touchscreen on my desk in an enclosure I found here, but I wanted it to be at an angle so I could see it better on my desk. Quickly threw this together and tried to minimize the…

Downloads
22
Likes
4
Rating
0
P
Printablesspuder

Waveshare Raspberry Pi Compute Module Case Lid

3D printable Lid for the Waveshare POE adapter board I have a CM-10-POE-Box, however I lost the lid. Included are 2 designs: 1. Plain 2. Home Assistant Fusion 360 design file included for easy modification. The Home Assistant model…

Downloads
20
Likes
7
Rating
0
P
PrintablesMunich3DThinker

Raspberry Pi Radio Case

Parts needed Raspberry Pi 3B+ IQAudio DAC Pro Official RaspberryPi Touchscreen 7" (Version 1) Rotary encoder KY-040 (axle diameter: 6mm) 4x Hexagon socket head cap screws M2x5 mm 2x Heatset inserts M2x4x3.2 mm (for both sides of the inner…

Downloads
17
Likes
3
Rating
0
P
PrintablesOpenscaddad

Raspberry Pi Bracket for Dell U2412Mb Monitor

In the early 2000s, Dell made a series of monitors that had an optional sound bar powered by a 24w, 12v barrel jack. These monitors also functioned as a USB hub. Pictured is the back of a U2412Mb monitor and a 3D printed bracket that…

Downloads
17
Likes
4
Rating
0
P
PrintablesScott Gibb

Z-Axis Mounting System for Raspberry Pi Camera

Z-Axis Mounting System for Raspberry Pi Camera A simple bracket that replaces the top left-hand z-rod holder. This allows you to mount the Raspberry Pi camera at an angle to the print bed, whilst still being attached to the 3D printer.…

Downloads
16
Likes
3
Rating
0
P
PrintablesVorpal

Adapter from Raspberry Pi 5 case to NVME SSD hat

Adapter to mount Geekworm X1001 NVME SSD hat to the passively cooled Edatech ED-Pi5Case-B for the Raspberry Pi 5. The included standoffs with the X1001 won't fit, so this is an adapter. Print in PETG or another heat resistant material,…

Downloads
14
Likes
3
Rating
0
P
PrintablesHermannSW

Raspberry camera stepper_pan manual_tilt camera holder

Camera holder can be used for any Raspberry flat ribbon cable camera. It fits directly onto cheap 28BYJ-48 stepper motor shaft (4096 steps/rotation). Attached OpenSCAD file M5_3.scad allows you to change eg. vertical height, or make it…

Downloads
14
Likes
1
Rating
0
P
PrintablesIcegianter

Cover for Raspberry Board

Dimensions: 105 mm x 100 mm x 46 mm Parts Included: Raspberry board cover Brand: Creality Printer: Ender 3 Filament: Overture PLA 1.75 mm Black Bed Temp: 60* C Nozzle Temp: 200* C Nozzle Type: .4 mm Infil: 10% Infil Type: Gyroid Supports:…

Downloads
13
Likes
0
Rating
0
P
PrintablesOssilampe

Magnethalter für RaspberryPi Gehäuse

zusätzlicher Magnethalter für ein RaspberryPi 4 gehäuse

Downloads
12
Likes
1
Rating
0
P
Printablestigerfl0

Camera holder RaspberryPi for eg. Ikea Table Case

I designed a cameraholder without the need of screws to hold the camera. It fits for the standard Pi camera and spin offs. There are different angle models available. You can print it at 0.1mm without supports.

Downloads
11
Likes
3
Rating
0
P
PrintablesIan Too

F450 Quadcopter - Raspberry PI 4 Mount

Requirements: M3 X 8mm Hex Socket Head Cap Screws and Nuts M2.5 spacers and Screw set (x4)

Downloads
10
Likes
2
Rating
0
P
PrintablesMcBig

RaspberryPi Zero ETH/USB Hub frame and cover

This is frame and cover for adding Waveshare Ethernet/USB HUB HAT (B) to RaspberryPi Zero as Host for MK3. This can be used mainly for PrusaLink with USB Cam. Frame is designed for both RaspberryPi Zero and RaspberryPi Zero 2.

Downloads
9
Likes
2
Rating
0
P
PrintablesRoman Huante

Raspberry Pi and Adafruit Perma-Proto Board Case for Prusa i3MK3

Overview For a video tour of this tower setup, please visit this reddit post . In this video I explain how this quick-release system works along with some of the other upgrades that I have made for my Prusa i3MK3S+ with MMU3! (: The main…

Downloads
9
Likes
0
Rating
0
P
PrintablesSneaks

Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

IMPORTANT NOTE: 3D-printed plastic screws will break. Because of the way a 3d printer works, and the way the screws are typically oriented during printing, they are very weak. Things like printing in PETG, adding more perimeters, and…

Downloads
27,779
Likes
6,271
Rating
4.9
P
PrintablesStamos

Raspberry Pi 5 case

This case is for the Raspberry Pi 5. At the rear end you can easily use the power button and view the led indicator. At the bottom you can fit M2.5 nuts and use M2.5 bolts to secure the board. There is a version with air-vents in case you…

Downloads
23,412
Likes
1,685
Rating
4.9
P
PrintablesStamos

Raspberry Pi 3/4 B+ Case

This is a case for Raspberry Pi 3B+/4*. You can choose between two covers with different patterns. The cover with the hexagonal pattern can be dual color, if you use the add color change feature, in PrusaSlicer . The covers are snap fit.…

Downloads
22,231
Likes
1,963
Rating
4.89