9,738 models
Useful, nice looking and easy to build an enclosure for Original Prusa i3 MK3S with MMU2S unit build from Ikea LACK table. Check the article with build instructions . NEW After a lot of asks, the STEP file is available for download in…
Print approx. €4.10–€5.02 excl. taxPreliminary estimate for PETGSource material: PET
Follow the Mikolas Zuza's tutorial article on: https://www.prusaprinters.org/cheap-simple-3d-printer-enclosure/ Plexiglass dimensions: 3pcs: 440 x 440 mm, thickness 3mm 2pcs: 220 x 440 mm, thickness 3mm If you have a 3D printer with MMU2S…
Print approx. €1.42–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
This version of the spool holder is WITH hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Blog article: Drybox build instructions .
Print approx. €1.01–€1.23 excl. taxPreliminary estimate for one variant
This version is WITHOUT hole for humidity sensor. Drybox is designed to be placed on the right side of the enclosure. Article with build instructions:…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
The beautiful enclosure of the Prusa Core One is not as airtight as it could be and if you have LEDs installed inside air and light will vanish through the corner gaps where the steel profiles come together. Others have addressed this…
Print approx. €0.96–€1.17 excl. taxPreliminary estimate for PETGSource material: PET
The newly released Raspberry Pi 5 is a significant upgrade from its predecessors, offering enhanced performance and connectivity. To complement this advanced board, we've created a new 3D-printed case prioritizing both airflow and…
Print approx. €6.44–€7.87 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: I've uploaded the Fusion360 and STEP files for easier remixing in case you can't find the Titan blower. Also check the comments and remix section - there are mods for cheaper roomba filters, philips car filter, active carbon…
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
Don't want to read all of this? There's now a tl;dr at the bottom of this document. Important Note Regarding Input Shaper: Before printing please see the Input Shaper section below for important notes regarding potential issues with input…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
*** Thanks for checking out this model! *** If you appreciate what I'm doing, please consider buying me a coffee , and check out my other models ! ********** [ANNOUNCEMENT Oct 7, 2024] I just confirmed - the xRivet also fits the Original…
Print approx. €0.44–€0.54 excl. taxPreliminary estimate for PETGSource material: PET
This a guide for your Ptfe tubes on the top of Prusa enclosure. I make it for my (un)original prusa drybox systeme. 5 Spool rewinder adapter for MMU2S / MMU3 in (un)original Prusa drybox :…
Print approx. €0.35–€0.43 excl. taxPreliminary estimate for PETGSource material: PET
This is the 2022 version 5 of the MiSTer Multisystem enclosure. For printing the enclosure, please read the included PDF - how to print guide. Multisystem is brought to you by Heber ltd and RMC Retro. If you have any technical questions…
Print approx. €2.20–€2.69 excl. taxPreliminary estimate for one variant
Please hit LIKE on my design if you download it so I get credit, thanks! This is a counter top enclosure designed to hold a 1602 LCD display run by an ESP-32 processor. There is also a spot for a LoRa transceiver. Fits these parts: ESP32:…
Print approx. €0.57–€0.70 excl. taxPreliminary estimate for one variant
To follow on from and finish off my Ultimate Prusa MK4 casing I wanted to create a center tray similar to the original for the MK3 version . I was shown this cable cover and wanted to take this design and use it as the basis for the whole…
Print approx. €2.99–€3.66 excl. taxPreliminary estimate for one variant
Fixation for (un)original Prusa drybox on the Prusa enclosure ( slim version available) You need some screw and nuts same one you use in a Prusa kit. 4x M3 nuts 8x M3x6 4x M3x12 -5 Spool rewinder adapter for MMU2S / MMU3 in (un)original…
Print approx. €3.09–€3.77 excl. taxPreliminary estimate for PETGSource material: PET
Co-author: @JakubJoziewic_498185 This enclosure was designed in order to be easily built, customisable and accessible. Minimal panel sizes for Prusa i3MKS+ are (in millimetres) back: 500x525, side: 2 590x525, top: 506x590, front: 2 60x525…
Print approx. €2.77–€3.39 excl. taxPreliminary estimate for PETGSource material: PET
A fully functional Apple Macintosh Plus in a 3D-printed 2/5-scale enclosure. It was printed on Prusa 3D MK3S printers with beige PLA filament. It runs on a Raspberry Pi 4B with Mini vMac, a Macintosh emulator. The “Files” section contains…
Print approx. €0.12–€0.15 excl. taxPreliminary estimate for one variant
Please note that a revised Version V5 (2022) of this enclosure is also available on Printables Here - MiSTer Multisystem V5 2022 classic gaming console 3D Printed enclosure design by Multisystem | Download free STL model | Printables.com…
Print approx. €0.34–€0.41 excl. taxPreliminary estimate for one variant
A modular Spool holder that supports both 2kg and 1kg spools for the Original Prusa Enclosure (MK4/S & MK3/S/+). PRINTING RECOMMANDATIONS: Print with a nozzle not bigger than 0.6mm; Print with a layer height not taller than 0.3mm; We…
Print approx. €7.20–€8.80 excl. taxPreliminary estimate for PETGSource material: PET
This enclosure is divided into multiple parts viz., Top, bottom, and buttons. The top and bottom half are held together with friction. No screws are required. NOTE: Please make sure to remove the SD Card before opening the case, or else…
Print approx. €0.04–€0.05 excl. taxPreliminary estimate for one variant
Add Nov 2021 slider to lift the roof plate when closing the door Fits perfect to an IKEA LACK table with 55x55cm Or you us a 550x550mm wood plate. no disturbing table feet's you have full view access to your printer. It is designed for…
Print approx. €13.98–€17.09 excl. taxPreliminary estimate for PETGSource material: PET
Here's a video I made on improving MMU2 reliability Very simple model to pass PTFE tubes through your Original Prusa Enclosure. The printed part is a loose fit in the enclosure and there is a press-fit retaining clip to keep it in place.…
Print approx. €0.07–€0.09 excl. taxPreliminary estimate for one variant
When I assembled the enclosure, I had already decided to treat myself to the hinged lid version. It is easier to clean the enclosure or maintain the air filter. But what didn't satisfy me from the start were—excuse my choice of words—the…
Print approx. €0.80–€0.98 excl. taxPreliminary estimate for PETGSource material: PET
Many of the other no touching tools do not have any type of enclosure which we will touch it with our hands or clothes eventually. Even those with an enclosure, it is a separate enclosure so it is not as convenient. This design is…
Print approx. €1.66–€2.03 excl. taxPreliminary estimate for one variant
In keeping with the original look of the front doors of the Original Prusa i3 MK3 Enclosure, this is a redesign of the front door hinges and front corner blocks so you can remove the doors when organizing or doing maintenance on the…
Print approx. €0.28–€0.34 excl. taxPreliminary estimate for PETGSource material: PET
Remixed a very nice model, but reduced the number of sheets to 2 (I have 3 in standard rotation: smooth, satin, and tex. Mount directly with 6mm M3 bolts. For mounting point suggestion check the original model explanatory pictures
Print approx. €6.72–€8.21 excl. taxPreliminary estimate for PETGSource material: PET
I wanted to have a bed-mounted camera on my Ender 5 S1, but all of the premade ones I found didn't fit in one way or another. This should be compatible with any 2020 extrusion; I included holes in the side and bottom for locking it down…
Print approx. €0.98–€1.19 excl. taxPreliminary estimate for one variant
Yet another tool holder for the Original Prusa Enclosure. Already prepared to be extendable with some holes in the bottom to attach clips for example. If you want to mount it on the left side instead, just mirror it in PrusaSlicer. The…
Print approx. €8.18–€10.00 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure includes external access to reset / bootload button and to on-board LEDs.
Print approx. €0.23–€0.28 excl. taxPreliminary estimate for one variant
The making of my Lack Enclosure was a very long journey but it was worth it I thank all the other makers who inspired and helped remix my own parts I hope this remix will inspired you to do the same ! Features Fully customizable and…
Print approx. €2.34–€2.86 excl. taxPreliminary estimate for PETGSource material: PET
A new redesigned version GEN2 Steel Sheet holder is available now: GEN2 Steel Sheet Holder V2 for Lack Enclosures _____________________________________________________________ The Gen2 Steel Sheet Holder for Prusa MK2.5 and MK3 is part of…
Print approx. €1.68–€2.05 excl. taxPreliminary estimate for PETGSource material: PET
Electronic Enclosure Master Template by Andreas Spiess: https://github.com/SensorsIot/Project-Box-Templates Great Idea To have a Paramteric Master for Project Boxes you can vary quickly! Thanks a lot! Youtube:
Print approx. €0.61–€0.74 excl. taxPreliminary estimate for PETGSource material: PET
This is an enclosure for this board from Waveshare with POE-module and OV2640-camera which you can get on Ali and other sources. not fancy or pretty, but functional, lightweight, space-saving and filament-saving ;P Addons I also made an…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for one variant
I designed this enclosure for my project "Temp2IoT". It can be equipped with a WeMos D1 mini and provides cable outputs for a USB cable for power supply and another for a DS18B20 temperature sensor. After assembling the two parts of the…
Print approx. €0.79–€0.96 excl. taxPreliminary estimate for PETGSource material: PET
UPDATE: This model is now obsolete. You can find much improved/updated versions; The “Universal Version” (which fits the MK3/S/+, MK3.5, MK3.9 & MK4 printers) as well as the “MK4 Only” version here: Original Prusa Enclosure Precision Fit…
Print approx. €4.04–€4.94 excl. taxPreliminary estimate for PETGSource material: PET
Update to the Multisystem FPGA console enclosure for 2023 - easier for print farm production, quicker using 0.6mm nozzles (recommended) the design is tuned for 0.6mm E3D V6 nozzles on a Prusa i3 MK3/3+/3S+ machine. For construction and…
Print approx. €5.64–€6.90 excl. taxPreliminary estimate for one variant
Features Easy to print and install Only 1 plate to print (5 small parts) Reuse the existing hardware (bolts and nuts) Folds completely to the side of the printer when used with the optional 270° Hinge for Original Prusa Enclosure What you…
Print approx. €0.56–€0.68 excl. taxPreliminary estimate for PETGSource material: PET
This also fits above the thumb screw of the filtration unit.
Print approx. €1.86–€2.27 excl. taxPreliminary estimate for PETGSource material: PET
The model is designed to house an apple AirTag, with a screw in top (cap) and an o-ring for water tightness. I'm also including the fusion 360 file for anyone to make an easy remix there. Printing recommendations Printing the base and top…
Print approx. €1.10–€1.35 excl. taxPreliminary estimate for one variant
Snap-fit enclosure by SP5CMD
Print approx. €0.20–€0.24 excl. taxPreliminary estimate for one variant
This is part three of my enhancements/addons for the Original Prusa Enclosure (see my other models here on Printables). In addition to the two spool holders inside the Enclosure, I wanted a spool holder on top of the case. So I designed a…
Print approx. €0.42–€0.51 excl. taxPreliminary estimate for PETGSource material: PET
Presenting the Modular Transport Handles - a remarkable blend of practicality and versatility, specially designed for seamless operability. This combination remix ingeniously integrates the gripped version of transport handles with an…
Print approx. €6.83–€8.35 excl. taxPreliminary estimate for PETGSource material: PET
Remix of "Tool Holder for Original Prusa Enclosure" by Prusa Research. To be mounted on the front right corner of the enclosure. Features: Four SD card slots Eight 4.25mm dia. holes Two 10mm dia. holes One 7mm dia. hole One slot for…
Print approx. €4.86–€5.94 excl. taxPreliminary estimate for PETGSource material: PET
This model is heavily based off the RepBox stands from Kyle and MakoDaShark. I really enjoyed the stands they created however they didnt fit the Repbox 2.5 that I have. I used the printed models I had from MakoDaShark's design to create a…
Print approx. €12.26–€14.99 excl. taxPreliminary estimate for PETGSource material: PET
This is a CD/DVD/Bluray desktop 5-1/4 drive cabinet / case to be printed in 2 parts and assembled with a few screws and nuts Material 4 M3 Square nuts 4 M3 6mm Allen bolts 4 M3 25mm Allen bolts 4 rubber / cloth pads (optional) For more…
Print approx. €4.77–€5.82 excl. taxPreliminary estimate for one variant
A simple cover made to hide the cables that come from the printer to the front Display out of the enclosure - Included MK4 Gcode - Printed in PLA because it's not structural but PETG could be better - Update 01-11-23 Added a longer…
Print approx. €0.64–€0.79 excl. taxPreliminary estimate for one variant
printed with: Prusament PLA Galaxy Black support necessary
Print approx. €7.55–€9.22 excl. taxPreliminary estimate for one variant
Larger version of Prusa Research Enclosure spool holder for use with 2kg filament spools. To mount the spool holder - complete you will need the following fasteners*: M3x8 screw (2x) * The package of the Original Prusa Enclosure includes…
Print approx. €3.01–€3.67 excl. taxPreliminary estimate for PETGSource material: PET
Simple filament guide for single color printing. Printing parameter: Material: PETG Resolution: 0.1 mm Perimeters: 0 Infill: 15% Supports: no Assembly: Press fit two M3n nuts into the bottom piece. Put top piece in the hole in the center…
Print approx. €0.58–€0.71 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure for a NodeMCU ESP8266 board. Allows space for connections onto the male header, with a small cable exit. Also allows access to the USB port. Use two short M2.5 countersunk screws to hold the lid in place. This also clamps the…
Print approx. €1.13–€1.39 excl. taxPreliminary estimate for one variant
This is an external housing that attaches to the front of the Official Prusa MINI enclosure. This design only works with the door hinge mounted on the left side. Required hardware: -3x M3x8 screws -1x M3 nut -Reuse the 4x M3 screws from…
Print approx. €5.29–€6.47 excl. taxPreliminary estimate for PETGSource material: PET
The Original Prusa Enclosure Mesh Side Boxes made by VisualReversal is an amazing item to add to your printers. Since the release of the MK4 these no longer appear to fix correctly. I made some slight adjustments so that this model…
Print approx. €6.41–€7.84 excl. taxPreliminary estimate for PETGSource material: PET
Features Combines the Adjustable Thermometer Bracket and the Filament Guide Enables to use a second spool holder on the left side Uses the same hardware as for the filament guide What you need Printed parts thermometer_bracket_A (1x)…
Print approx. €0.13–€0.16 excl. taxPreliminary estimate for one variant
Yet another tool holder for the Original Prusa Enclosure.
Print approx. €7.26–€8.88 excl. taxPreliminary estimate for one variant
MK4S LCD to enclosure mount, this is to mount the LCD from the MK4S to the enclosure at the same level of case with feet. I printed this with the need of supports. so the parts taht apprear to look like ramps should face up and be the…
Print approx. €0.53–€0.65 excl. taxPreliminary estimate for one variant
Using the original pieces and this new size, you can now insert a 18"x24" piece of plexiglass without cutting. To get to 18" use: 2 corners, 1 six inch side, and 1 - 214mm side. To get to 24" use: 2 corners, 2 six inch sides, and 1 -…
Print approx. €6.69–€8.17 excl. taxPreliminary estimate for one variant
Small ( < 20g! ) mount that keeps the light source behind and the camera out of the way of the toolheads. Assembled with one M4 heat set insert. Secure in corner by first pushing through the two side pegs and then securing the heat set…
Print approx. €1.09–€1.33 excl. taxPreliminary estimate for PETGSource material: PET
I created this Magnetic Waste Basket to provide a convenient place to hold filament scraps and imperfect parts right at my Original Prusa MK4 printer - instead of having to constantly make the trip to the plastic recycling bin. It…
Print approx. €5.31–€6.49 excl. taxPreliminary estimate for PETGSource material: PET
Final release after more than 6 months of developing and testing! After a several month long beta process and countless improvements (especially of the auto-rewind mechanism) the complete EMMS works 100% reliable for month now. It took…
Print approx. €0.60–€0.73 excl. taxPreliminary estimate for PETGSource material: PET
Everytime you're doing maintenance on your MK inside the Prusa Enclosure the PTFE tube for the filament will hang off right in the middle and is always in your face. Or you're using a MMU but still want to run single color prints off the…
Print approx. €0.13–€0.15 excl. taxPreliminary estimate for PETGSource material: PET
LC Technology 12V 4 Channel Relay Board (LC-ESP01-4R-12V) https://templates.blakadder.com/LC-ESP01-4R-12V.html Use M3 x 10mm cap screws. Printed labels for NO, COM, NC did not come out well - but I think there's enough there to know what…
Print approx. €1.87–€2.28 excl. taxPreliminary estimate for one variant
My latest project has been building this LACK enclosure for my Ender 3 v2. Almost all enclosures I could find have the spool mounted on the top, which I did not want. I'm planning on getting a second printer, and I want to plop another…
Print approx. €12.46–€15.23 excl. taxPreliminary estimate for one variant
Update 3/19: needed a taller structure. It was faster & easier to do an extension “stick” and a coupler. Plus, this way, several extensions can be used if desired. Also added an optional cable holder in the coupler. Simple enclosure &…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
This is a small two-axis webcam holder to fasten inside of a printer enclosure. It requires no screws and the camera can be attached using the printed 1/4" camera screw. No screws are needed for the assembly. The parts have an…
Print approx. €6.64–€8.11 excl. taxPreliminary estimate for PETGSource material: PET
This door holder attaches to the bottom screw of the upper door hinges and operates similarly to the way your car door operates. It has detents that hold the door at specific positions (90, 135, and 180 degrees). The door hinges have…
Print approx. €0.55–€0.67 excl. taxPreliminary estimate for PETGSource material: PET
It's designed to fit with the https://www.printables.com/model/252904-transport-handle-for-original-prusa-enclosure. It can fit 6 spools of 1 kg and it can accommodate 2 kg spools. For mounting use: 4 m3 nuts 2 18mm m3 bolts 6 12mm m3…
Print approx. €3.16–€3.87 excl. taxPreliminary estimate for PETGSource material: PET
Printing PLA, .20mm, supports optional ~22min Parts Required 3x20 pin (1x) Logitech Camera c270 w/hinge mount removed (1x) M3x8 Screw (1-3x) Assembly Push the 3x20 pin part way through one side of the mount, use pliers if neccesary Put…
Print approx. €0.34–€0.42 excl. taxPreliminary estimate for one variant
I used to use @OneTrueMyth's Deluxe Tool Caddy for my Prusa Mk3S. Recently I put it into a LACK enclosure, which isn't large enough to hold the tool caddy. Perusing the usual sites, almost all tool caddy models for the LACK enclosure…
Print approx. €0.14–€0.17 excl. taxPreliminary estimate for one variant
You need the adapter to mount the MK4 Display in front of the Ikea LACK enclosure
Print approx. €0.20–€0.25 excl. taxPreliminary estimate for one variant
I know “just buy the addon then”, but I like designing in Fusion and am a DIYer so I came up with my own solution for an air extractor / filter box for my Original Prusa Enclosure (OPE). What I already had on hand was a 120mm 12VDC fan…
Print approx. €1.14–€1.39 excl. taxPreliminary estimate for one variant
A simple solution for 2 PTFE inserts. This is simply screwed into one of the original Prusa enclosure holes. For this you need: 1x M3 nut 1x M3 screw 5mm 2xPtfe Tube 2xM10 straight pneumatic coupling Print with supports, in the area of…
Print approx. €0.67–€0.82 excl. taxPreliminary estimate for PETGSource material: PET
This should solve the issue, that the filament sensor get stuck in the master spool. Also the Filament changing doesn't get more complicated. You need: PTFETubeMountingBreaket Original PTFE tube of the Prusa Mini 2x M3 nuts 2x M3x8mm…
Print approx. €0.33–€0.40 excl. taxPreliminary estimate for PETGSource material: PET
Because I use them to wipe the print surface. Uses 2x M3 nuts, and 4mm, 6mm M3 bolts.
Print approx. €3.70–€4.53 excl. taxPreliminary estimate for one variant
This model is now archived and will not be updated - please see below for alternatives: Compact 2x M3 screws Compact model for 3 wires and Wago 212-413 In line enclosure for Wago 212-2411…
Print approx. €0.62–€0.75 excl. taxPreliminary estimate for PETGSource material: PET
When handling prints, maintaining or adjusting the 3D printer placed in the Original Prusa Enclosure, the Enclosure door must be open. Quite often the door moves by itself to a position that is undesirable. Using a set of these 3D models…
Print approx. €1.41–€1.73 excl. taxPreliminary estimate for PETGSource material: PET
Update: I added a mirrored version of all bottom corners, top corners, and the middle bottom hinge. This is my version of the IKEA Lack enclosure. It is higher to put a plate of foam and concrete plate/ stone plate under the printer to…
Print approx. €0.33–€0.41 excl. taxPreliminary estimate for PETGSource material: PET
Created a parametric model that automatically adjusts the necessary features for a strong custom height Ikea Lack Table Leg attachment. Change the “baseheight” in the FreeCAD spreadsheet to change the height. The minimum height without…
Print approx. €7.93–€9.69 excl. taxPreliminary estimate for PETGSource material: PET
I've seen a few folks out there that have mistakenly removed the cutout thinking it was necessary for the optional filtration system sold by Prusa. Since I needed to remove the cutout for another project I was working on (fume venting), I…
Print approx. €0.63–€0.77 excl. taxPreliminary estimate for PETGSource material: PET
The original steel sheet cover of the exhaust fan needs to be disassembled in order to swap the filter. This means to have access from the back but if your XL is butted against the wall, this process can be quite cumbersome. This design…
Print approx. €6.82–€8.33 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure for an LM2596 buck converter. To remove cable strain completely the anderson connectors lock into the case, it produces a cleaner look and works very well. This works with 15/30/45A anderson connectors like the ones in this kit…
Print approx. €1.16–€1.42 excl. taxPreliminary estimate for PETGSource material: PET
Useful links first Download PDF User Manual (Build guide) Github repository with the software installer Latest script release page Support thread on Prusa Forum Introduction This is a small modification of Prusa Enclosure which offers an…
Print approx. €1.40–€1.71 excl. taxPreliminary estimate for PETGSource material: PET
Owners of the original Prusa enclosure and the Quick Release for the MK3S+ add-on have probably noticed that the LCD display has to be removed, and the cables unplugged every time the MK3S+ is removed from the enclosure. This little…
Print approx. €0.86–€1.05 excl. taxPreliminary estimate for PETGSource material: PET
This model can be printed without supports and allows the MK4 spool holder to be mounted inside the LACK table enclosure mk2 design from Prusa.
Print approx. €2.32–€2.83 excl. taxPreliminary estimate for PETGSource material: PET
Enclosure to mount and protect an SX1262 uFL connected antenna TBeam outdoors. Because of the longer antenna I chose, and with the MK3S being limited to 210mm height, I made the tube a slip fitting. Also, because I would have carry tools…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for PETGSource material: PET
Remixed from ‘Creality Ender 3 Pro - Raspberry Pi 2/3/4 + LCD Enclosure’ by eoyilmaz, specifically v042 for Pi 2/3. Note: This remix only works for Pi 2/3 , not 4. When mounting it to the LCD panel, you should use only 3 of the original…
Print approx. €5.91–€7.23 excl. taxPreliminary estimate for one variant
Intro: With this mod you can feed filament over the top of the Prusa XL original enclosure without the need of drilling holes to the metal sheet. You have to drill the top acrylic plate which is replacable…
Print approx. €0.82–€1.00 excl. taxPreliminary estimate for PETGSource material: PET
My Prusa MK3 enclosure. It features: 2 full size front doors for easy access to the printer walls and doors easily removable without tools back walls snap on with magnets doors use lift off hinges spool holder mount for original Prusa “T”…
Print approx. €0.70–€0.86 excl. taxPreliminary estimate for one variant
Update: Added Mirrored version for left corner of OPE. Print instructions: Print only the model you need (Standard vs. Mirrored version) Open the .3mf file as a project to load all manual MMU settings There are 4 color changes First color…
Print approx. €0.42–€0.52 excl. taxPreliminary estimate for PETGSource material: PET
Remixed model "Sonoff 4CH Pro R2 enclosure" in order to integrate also a tiny power adapter inside
Print approx. €3.16–€3.87 excl. taxPreliminary estimate for one variant
MMU3 Buffer holder, which can be in the Original Prusa Enclosure behind the printer. Ideal solution, if you don't want to have it outside, but still “easy” access to it. It is situated in the right back corner. The depth of it is 67mm,…
Print approx. €1.78–€2.18 excl. taxPreliminary estimate for one variant
coupling PTFE tubes from the MMU buffer holder to PC4-M6 quick coupling Components required for assembly: Typ 1: 5x self-cutting screw 3.5x12 2x longer countersunk head self-tapping screws for wall mounting 5x PC4-M6 quick coupling Typ 2:…
Print approx. €2.06–€2.52 excl. taxPreliminary estimate for PETGSource material: PET
Add your T-Link Tapo C100 camera to the inside corner of your Original Prusa Enclosure. Mouns via a single hole using a M3x8 screw, screw will cut the threads. If you find the holes are too loose or tight for your printer, you can edit…
Print approx. €0.96–€1.18 excl. taxPreliminary estimate for PETGSource material: PET
This 3D model replaces the grommets from Hinged Lid kit. They give guidance to the tubes from the MMU3 out of enclosure in a downward and toward the center of the enclosure. These grommets should probably be a part of the base enclosure…
Print approx. €1.02–€1.24 excl. taxPreliminary estimate for one variant
My Raspberry Pi Zero W caused no end of problems with my MK3. With a little redesign, I switched to a BPI Banana Pi M2 Zero Plus and now everything works a lot better. If you wanted a WiFi-connected MK3 or MK3s (with a camera) but also…
Print approx. €0.26–€0.32 excl. taxPreliminary estimate for PETGSource material: PET
Without any modification on the stock machine (neither mecanical nor firmware), this integrated enclosure kan provide a chamber temperature up to 45°C to limit warping and enhance layer adhesion while printing more technical materials as…
Print approx. €0.59–€0.72 excl. taxPreliminary estimate for PETGSource material: PET
This is an enclosure for the BME680 board by Pimoroni. It's designed around the use of angled pins, though there should be just enough space if you'd rather have straight pins soldered to the board. The lid snaps nicely onto the two…
Print approx. €0.21–€0.25 excl. taxPreliminary estimate for one variant
A simple remix of the original midfoot for the prusa enclosure. All you need 2 magnets : 10mm x 2mm just press them in and you're done.
Print approx. €0.98–€1.20 excl. taxPreliminary estimate for PETGSource material: PET
Update 3/19: check out Ver2 https://www.printables.com/model/427209-arduino-nicla-vision-enclosure-stand-v20 based on Arduino's STEP file with tighter tolerances and other improvements Enclosure includes external access to reset /…
Print approx. €0.48–€0.58 excl. taxPreliminary estimate for one variant
For my Ikea drybox mount I needed the original transport handle to be mountable with a screw from the enclosure's inside. So I made this remix which also features a PTFE pass through option to feed the filament directly from the box to…
Print approx. €2.46–€3.01 excl. taxPreliminary estimate for PETGSource material: PET
This is an external slimline disc drive enclosure. It was designed around a 12.7mm Disc Reader out of an old Dell Optiplex, but any Laptop/Small Form Factor 12.7mm DVD/CD Drive will fit. (9.5mm drives may fit too with a bit of ingenuity)…
Print approx. €4.82–€5.89 excl. taxPreliminary estimate for one variant
Needed a way to hold two USB extension cables… One is from the printer's memory stick slot, the other is from the computer. I don't like plugging the USB stick in and out of the printer directly (so as not to wear out the port) it's much…
Print approx. €2.17–€2.65 excl. taxPreliminary estimate for PETGSource material: PET
