Wszystkie modele

Roblox Rivals Fist

CS Karambit Detailed Replica

Unfolded iPhone Duo Stand – Holds Only the Corners, Landscape + Portrait, Cable Window

A one-piece stand for the fully unfolded iPhone Duo (open 164.6 x 117.8 x 5.2 mm, 254 g - Apple's spec page). The open phone leans back 20° and rests only on its two lower corners , which sit on a concave arc (R 150 mm). The seat floor is…

Spiral Vase

✨ Features Smooth spiral design with elegant curves Minimalist look – fits any interior Easy to print (no supports needed) Strong and durable structure Looks great even in basic PLA colors Perfect decorative gift 🖨 3D Printing tips…

Flip-Through Card Storage Crate for Yoto Cards (2 or 3 Lanes)

An open, one-piece crate sized for Yoto audio-player cards (credit-card size according to third-party sources, 85.6 x 54 mm; check one of your cards). The cards stand in 2 or 3 lanes and lean back 12° against an inclined back wall, behind…

Magnetic Hook – No Glue, No Drilling

Great gift for your mother, grandmother, or anyone who loves a clean and practical home. This smooth and minimal magnetic hook is designed for everyday use in the bathroom, kitchen, or hallway. Thanks to the strong magnet, no glue and no…

Leaning Wrench Organizer for Shallow Toolbox Drawers - Customizable, Metric & SAE

A flat rail for a toolbox or workbench drawer that holds combination wrenches (spanners) standing on edge, all leaning at one angle. Each wrench stands with its open end down in its own slot ; the shank and the ring end rest forward over…

Self-Watering Planter with Ball-Float Water Gauge (40 mm Table-Tennis Ball) – 3 Sizes

A self-watering houseplant pot in three sizes, printed in four parts, with a water gauge that uses one bought standard 40 mm table-tennis ball as the float . The lower part of the pot is a water reservoir; the soil sits on a riser plate…

Pinch Rods for Squaring Cabinets – Disc-Tip Heads + Zero-Set Diagonal Scale, Use Your Own Sticks

A printed kit that turns two of your own wooden sticks of equal length into pinch rods (squaring sticks) for checking a box, cabinet carcass, drawer or frame for square during glue-up. Each end gets a head with a round disc tip : pressed…

Socket Organizer for Shallow Toolbox Drawers – Deep Sockets Recline to Fit, Sizes Engraved, Customizable

A low tray for a toolbox or workbench drawer that holds one drive size of hand sockets, shallow and deep side by side , one column per size. Shallow sockets stand on round pins sized from the ISO drive square. Deep sockets that would hit…

Kids Routine Board With a One-Sweep Reset – Slide Each Task to Done, Captive Keys, Swap the Cards

ResetRail is a printed routine board for children: one captive slider key per task row next to a paper task card. The child slides the key across to the check when the task is done; it clicks into place at both ends. In the evening a…

DC Barrel Plug Size Key – Tell 5.5x2.1 From 5.5x2.5 Without Calipers, Plus a Socket Probe

A flat printed key, plus a small socket probe, that reads the size of a coaxial DC power plug ("barrel plug") - the round plugs on adapters for routers, guitar pedals, LED strips, keyboards, soldering irons and laptops - without calipers.…

Rounded Capsule Wall Shelf on Sculpted Fin Brackets – Modular 400 / 600 / 800 mm, Hidden Wall Screws

A modern rounded wall shelf, 600 x 192 mm (400 and 800 mm from the same parts), printed in 200 mm PETG modules and carried by two to four solid PETG blade fins. The shelf body has wall-cut capsule ends (R120), a 24 mm front edge over a…

Hexagon Wall Shelf – One-Piece Faceted Honeycomb Niche, 108 mm Deep, Optional Hidden-Screw Panel

A modern hexagon wall shelf printed as one seamless PETG piece - no six boards, no joints, no thin bars. It is 186 mm across flats, 207 mm corner to corner and 108 mm deep , with a 14 mm front wall that steps down in three light lines (a…

Drawer Loft – Sliding Second Level for Deep Drawers (Gridfinity-Compatible), Slide Instead of Lift

A modular kit that adds a second, sliding level inside a deep drawer that already has a Gridfinity baseplate (Gridfinity-compatible; not an official Gridfinity product). Low lanes (1 grid unit wide) drop into the baseplate. A table - a 4…

Spiral Crown Vase – Designed to Fit LEGO Botanicals Bouquets, a Guide Tube for Every Stem

A two-part, two-colour display vase for brick-built flower bouquets , designed to fit LEGO® Botanicals bouquets. A 182 mm vessel with a thin twisted-flute skin holds a crown insert that sits flush in its rim. The crown has 19 (or 12)…

iPad Drawing Stand for Cased Tablets – Low-Angle Wedge With Pen Tray, mini / 11-inch / 13-inch

A solid, low-angle drawing stand for an iPad that stays in its case . The wedge supports the whole back at 15° (20° and 25° with two drop-in risers), stands on two grip lines with about 9 mm of air under a vaulted underside, and curls…

Immersion Blender Stand – Motor Stands Dry, Shaft and Whisk Hang Over Drip Windows, Cord Hook

One printed dock keeps a stick blender together on the worktop: the motor stands coupling-down on an open cone, the washed shaft and whisk hang blade-down from two V-slots over windows in the base, and the coiled cord hangs on a hook at…

Necklace Stand by Chain Length – 16 / 18 / 20 / 24 in Labelled Saddles, Every Pendant Hangs Free

All images are renders. This design is digitally validated; it has not been physically printed or tested. A necklace tree organised by chain length . Four labelled tiers - 16, 18, 20 and 24 inch (40 / 45 / 50 / 60 cm) - spiral up a…

Plinth Drawer for IKEA METOD – Removable Toe-Kick Drawer, No Screws in the Cabinet

A removable toe-kick drawer for IKEA METOD kitchens : a low tray that rolls on the kitchen floor in the empty space behind the plinth of a METOD base cabinet, between the cabinet's own legs. Its front is a piece sawn out of your own…

Cat-Resistant Plant Pot Cover – Petal Lid Fits Inside the Rim, Closes Around the Trunk, 16 Sizes

Petal Guard is a two-piece, flower-shaped lid that sits inside your plant pot's rim and closes around the trunk - no repotting . Rows of overlapping petals rise from a seat that rests on the rim's inner edge; between the petals, oblique…

Large Cat House Kit – 52 x 52 cm Floor, Two Arched Doors, Flat-Top Perch, Prints on 220 mm Beds

A covered indoor cat house that you print in parts no larger than 200 x 200 mm and put together by hand, with no glue, screws, magnets, zip ties or tools , into a house much larger than your print bed. Four L-shaped corner piers stand on…

Magnetic Tile Storage Rack – Every Shape Has Its Own Lane, for 3-Inch Classic Tiles

A low rack of lane modules for 3-inch (76 mm) classic magnetic building tiles , such as Magna-Tiles or PicassoTiles classic sets (not affiliated; fit per brand not verified - print the gauge). Each lane is cut to one tile shape: squares…

Fungus Gnat Trap Leaf for Houseplants – Holds a Yellow Sticky Card Just Above the Soil, 12/15/19 cm

A curved, printed leaf that lies on the potting soil along the pot wall, beside the plant, and holds a piece of a double-sided yellow sticky card flat, 10 mm above the soil - where fungus-gnat adults come out. Three short legs end in stop…

Weighted Desk Base for 30/40 oz Handled Straw Tumblers – Anti-Tip Foot With Hidden Ballast Bay

All images are renders and drawings. This design is digitally validated; it has not been physically printed or tested. A support-free printed foot for the tall 30/40 oz handled straw tumblers that are made to fit a car cup holder (a…

Crown-Up / Crown-Down Watch Stand – Rests on the Lugs, Crown Touches Nothing, 34–42.5 mm Cases

All images are renders. This design is digitally validated; it has not been physically printed or tested. A one-piece rest that stands a closed, round mechanical watch on its side - 3 o'clock down or 3 o'clock up - carried by its two…

Stone Cairn Jewelry Box – Stacking Faceted Stones for Rings, Stud Earrings and Chains

Four faceted, hand-hewn-looking stones that stack into a small cairn - and open into three closed, separate chambers. Each stone is the lid of the chamber in the stone below: rings stand in V-slits, stud earrings sit in slit fins, chains…

Nursery Pot Lifter for Cachepots – Hangs the Plant Above Drained Water, Finger Loops, 12 / 15 cm

A one-piece collar that holds a plant's plastic nursery pot inside a decorative pot (cachepot). A ring holds the nursery pot by its rim, or by its tapered body just below the rim. Four petal-shaped arms rise at 55° and rest on the inner…

MacBook Wrist Rest for the Sharp Front Edge – Height-Matched Palm Bridge, Held by the Laptop's Feet

A pair of low palm bridges that stand on the desk in front of an open MacBook Air (13 / 15-inch, M2 and later) or MacBook Pro (14 / 16-inch, 2021 and later) . Your wrist rests on a flat, rounded land 2-3 mm higher than the laptop's raised…

Blackout Blind for Narrow Door Glass – Crank Roller, No Cord or Chain, Sealed Side Rails

A slim blackout roller blind for the tall, narrow frosted glass strip in many modern doors (about 160 x 1560 mm visible glass, e.g. Westag LA-1 / LOBO LA 008 light cut-outs). A printed head (58 mm tall, 38.4 mm deep) sits on the flat door…

Thick Cutting Board Drying Stand – Pair of Feet for End-Grain & Butcher-Block Boards 25.5–64 mm

Two printed feet hold a thick wooden cutting board upright on its edge to dry. The board's two bottom edges rest on steep seat flanks with its bottom face in the air, and it settles a few degrees onto one rounded nose. Measure your…

Self-Righting Bud Vase – Round Flask for a Glass Test Tube, Rocks Back Upright When Knocked

All images are renders. This design is digitally validated; it has not been physically printed or tested. A round-bottomed bud vase in the shape of a classic round flask, with a belt at its widest point. Ten steel washers sealed in the…

Hush Chime – 5-Tube Pentatonic Wind Chime Kit With a One-Push Off Position (DIY Aluminium Tube)

Hush Chime is a kit that turns DIY-store aluminium tube (25 x 1.5 mm) into a five-tone pentatonic wind chime (C5 "Dawn": C5 D5 E5 G5 A5) - with a built-in off position . Six printed parts hang the tubes and carry the striker: a crown…

Portable Monitor Portrait Stand – Holds Only the Corners, Plug Hangs Free, Bare or Cover-On (13–16 in)

A portrait stand for 13.3-16 in USB-C portable monitors that have no portrait kickstand (folio or smart-cover models, which usually prop up in landscape only). The monitor stands upright beside your laptop, leaned back 13°, and rests only…

Hideaway Sofa Ledge – Hidden Phone Dock and Shelf Behind Loose Sofa Back Cushions, No Screws

Hideaway Sofa Ledge is a hidden ledge and phone dock behind the loose back cushions of a sofa . Two printed clamp stations sit on the top of your sofa's own back frame and carry a bought wooden board as a ledge for one seat. Each station…

Cordless Blackout Blind for Narrow Door Glass – Push Up, Pull Down, Let Go, Sealed Side Rails

A slim, cordless blackout roller blind for the narrow frosted glass lite in a door . The ready kit is for a half-height lite of about 190 x 990 mm visible glass (for example Westag LA-18-21,5 doors). Hold the bottom bar, push it up to…

American Mahjong Card Holder – Easel That Follows the Card's Folds, Standard and Large Print

Trifold is a low, reclined easel for the open hand card used in American mahjong - the standard card or the large-print card. The card rests on three slim modules that follow its own folds: the centre panel lies back at 35° and the two…

Tablet and Phone Holder for the Round 16 mm Kitchen Rail (Fits IKEA HULTARP) – Clicks On From the Front

RailRest is a one-piece cradle that hangs a cased tablet (landscape) or a phone on a round 16 mm kitchen rail - the size of IKEA HULTARP - so a recipe stays at eye level and off the counter. It clicks onto the rail from the front , swings…