Wyniki wyszukiwania: dampening

Sortowanie

114 modeli

P
Printablesrpanachi

Ender 3 Pro Dampening Feet

Ender 3 / Pro Dampening Feet for noise and vibration reduction I design this "spring like" foot to be attached on printer frame structure without modifications or need to remove the original rubber feet. You just need to print 4 of them…

Pobrania
1719
Polubienia
234
Ocena
4,85
P
PrintablesFixer Robotics

Ender 3 V3 SE/KE Dampening Noise Reduction Anti-Vibration Feet

This design is specifically aimed at reducing vibrations on the Y-axis, particularly the bed, which carries the most inertia and tends to resonate at higher harmonic frequencies. In my tests using Klipper and an ADXL345 sensor, I've been…

Pobrania
1489
Polubienia
346
Ocena
5
P
Printablesatemporal

Elegoo Neptune 3/4 (Pro/Plus/Max) Vibration Dampening Feet / Noise Reduction Mount + anti slip TPU Coasters

Hi I've reworked the universal mount model I remixed earlier to make it natively compatible with the Neptune 3 and 4 series, I can guarantee the dimensions will fit the 4 and 4 Pro with 20x38.5mm feet, and I think they should fit the rest…

Pobrania
1046
Polubienia
198
Ocena
5
P
PrintablesRedfeather

Sound deadening/dampening roller for cars (Print in place)

I'm just getting into car audio and decided to sound deaden my car. People keep recommending these rollers/brayers to help adhere the material properly so I decided to make one. Prints best at 0.2mm layer height. I printed it with 5 walls…

Pobrania
430
Polubienia
59
Ocena
4,5
P
PrintablesNordice

Anycubic Kobra 3 (Combo) - Dampening Feet

Important: Does NOT fit on Kobra 3 V2 !!! Wichtig: Passt NICHT am Kobra 3 V2 !!! Deutsche Beschreibung weiter unten. Version 2 is here! With different models for PLA and PETG! I couldn't find any dampening feet specifically for the Kobra…

Pobrania
409
Polubienia
47
Ocena
4
P
PrintablesGeoffory

Ender 3 Dampening Feet

Ender 3 Dampening Feet for noise and vibration reduction. Remixed from rpanachi's Ender 3 Pro Dampening Feet (on Printables and Thingiverse ). I found that design fit great on Ender 3 Pro, which has 6mm thick rubber feet. However the…

Pobrania
402
Polubienia
47
Ocena
5
P
PrintablesExtrutim

Prusa XL Sound Dampening Feet

Since the Prusa XL with its quite hard feet transmits vibrations and noise to the ground, I have made a foot which reduces the vibrations through foam pads for speakers and thus makes the printer much quieter. You need a total of 6 pads ,…

Pobrania
343
Polubienia
157
Ocena
5
P
PrintablesHobo4ssassin

Not-Official Bambu Labs P1P X1 X1C Adjustable Leveling Foot For Vibration Dampening and Stuff

Print from TPU. 15% gyroid infill worked well, feels slightly softer than original foot. Otherwise I just used the Generic TPU and 0.16mm Optimal profile. If you get stringing with TPU it's probably best to print sequentially instead of…

Pobrania
281
Polubienia
49
Ocena
5
P
PrintablesGeorge Hemming

Flashforge 5m Dampening feet

Remove standard foot, Keep original screw, Fit top half of foot to the machine, Press in the bambu style dampening rubber, Press on bottom of foot. If everything printed correctly then it should fit tightly together and not fall apart if…

Pobrania
247
Polubienia
37
Ocena
0
P
PrintablesZeroFlo

Anycubic Kobra Higher Feet Vibration Dampening

This are remixed (completely new designed, except the Dimension of the Rails) Anti-Vibration Feet to fit in larger Fans for the PSU and Motherboard. They feature different angles and Material strengths to eliminate different Vibration…

Pobrania
223
Polubienia
34
Ocena
4,5
P
PrintablesSteveJohnsen

Squash Ball Vibration Dampening Feet for 3D Printers with 2020 / 2040 Extruded Frameworks

These are three designs for vibration dampening feet for 3D printers, incorporating standard 40mm squash balls. The models are designed for 3D printers that have 2020 or 2040 extruded aluminum frameworks (Ender 3, 5 10, etc.). The models…

Pobrania
212
Polubienia
30
Ocena
5
P
PrintablesRESTLESS DESIGN

Vibration Dampening Feet

These are vibration dampening feet for the Prusa i3 MK3(S/S+), that mount directly to your printer without any modifications. You can leave the stock feet on, and slide these underneath your printer. As you can see in the image, there is…

Pobrania
171
Polubienia
27
Ocena
5
P
Printablesfxtec

Prusa XL vibration dampening feet TPU

I have remixed the Bambulab model for the Prusa XL. You can simply put the shoes under the original ones. The assembly is very easy. You only need to lift the Prusa XL carefully. A nice side effect is that the PrusaXL stands a little…

Pobrania
165
Polubienia
43
Ocena
5
P
PrintablesJustin White

Torus Sound Dampening Earplugs

An earplug with a hollow core torus that leads to the earpiece. There are little slits on the outside of the torus that allow sound through. dampening but not blocking it completely. Great to make white noise sounds like AC units and…

Pobrania
155
Polubienia
19
Ocena
4,67
P
PrintablesBrad @ FTBT 3D

Synology NAS Vibration Dampening Feet

My Synology NAS was making too much noise from vibrations so I remixed a Bambu Lab vibration dampening foot to work with the large Synologies. I printed in 95a TPU, but PETG could be a viable alternative as well if printed without the…

Pobrania
154
Polubienia
22
Ocena
0
P
PrintablesBlaahen

Ender 3 Noise Dampening Board Fan Cover

Quite a fast print, low material usage, stock screws fit perfectly. I tried multiple shapes for the fan shroud and found the one used in this design to be the most effective whilst maintaining good airflow (I managed to get a quieter…

Pobrania
140
Polubienia
8
Ocena
0
P
Printablesatemporal

Universal Vibration Dampening Feet / Noise Reduction Mount

Hi I remixed the model from emreerokyar on Thingiverse to make it compatible with any type of 3D Printer feet or even any appliance. Basically you can print them and use them straight away. The purpose of them is mainly to reduce noise…

Pobrania
139
Polubienia
15
Ocena
5
P
PrintablesRESTLESS DESIGN

Vibration Dampening Speaker Feet

You can place this pad underneath your speakers to reduce the transfer of vibrations. Note that this design won't help if you print it in rigid materials like PLA, ABS, etcetera. I printed it in ColorFabb nGen Flex, but any…

Pobrania
136
Polubienia
16
Ocena
0
P
PrintablesJ K

Dampening feet for Ender-3 V3 Plus feet (40mm round gum pads)

Dampening feet that fit the Ender-3 V3 Plus feet (40mm round gum pads)

Pobrania
118
Polubienia
22
Ocena
0
P
PrintablesAediel

Prusa CORE One Dampening Feet

These are Sound dampening feet for your Core One. Originally designed by Prusa Guy, just shorter and with a cutout for the dampeners. Support is needed for the cutout. As a dampener I used these, but be aware, that the color indicates the…

Pobrania
117
Polubienia
29
Ocena
5
P
PrintablesOGK

Ender 3 V2 Dampening Feet

This is a remix of: https://www.printables.com/model/198730-ender-3-pro-dampening-feet The Ender 3 V2 has a 12mm feet and only one v slot at the back. Because of this there is a left and right model for the back. You will need both. Print…

Pobrania
113
Polubienia
19
Ocena
5
P
PrintablesWyliebutler

Ender 3 PTU Dampening Feet

A simple design of dampening feet for the Ender 3 and other printers that have the same frame style. This was printed in TPU at 15 mm/sec with a 0.3mm height and zero retraction. The nozzle temperature was 220 with the bed at 60. They…

Pobrania
101
Polubienia
8
Ocena
0
P
PrintablesVirtuallyJason

Frosthaven Summons: Dampening Unit

Here's my proxy model for the Frosthaven Summons, the Dampening Unit! The artwork for this guy is at https://github.com/any2cards/frosthaven/blob/master/images/art/frosthaven/characters/summons/fh-summon-dampening-unit-front.png. As you…

Pobrania
100
Polubienia
7
Ocena
0
P
PrintablesSaguaroMaster

Prusa MK3/S/+ Dampening feet NEW VERSION

I did not have anything to fabricate a better solution, so I came up with this. These won't wobble as some of the other printable ones, yet they nicely reduce vibrations transmitted to the surface the printer sits on. It should have a…

Pobrania
87
Polubienia
12
Ocena
5
P
PrintablesMace

Ender 5 dampening feet

Ender 5 / pro dampening feet noise and vibration reducer

Pobrania
85
Polubienia
14
Ocena
0
P
Printablesdenonpotato

Bambu Lab AMS Anti-Vibration Dampening Mount P1P

Bambu Lab P1P Anti-Vibration AMS Mounts Previously I had my AMS beside my P1P but changed my setup to where I needed to mount it on top, I printed the original mount kit from the Bambu Lab site and soon realised the noise resonating…

Pobrania
79
Polubienia
15
Ocena
0
P
PrintablesIBNobody

Prusa XL Sound Dampening Feet - Sorbothane 1.5" x 0.5" Discs

These sound dampening feet slip over the Prusa XL's feet and are sized for 1.5" x 0.5" Sorbothane Discs. The 50 duro pads I chose were rated for 10-23 lbs / 4.54-10.43 kg per pad. The XL weighs somewhere between 25 and 35 kg. I plan on…

Pobrania
68
Polubienia
15
Ocena
5
P
PrintablesJan Halas

Synology DS218+ vibration-dampening legs

My first model, simple and overkill, but effective. Takes about 1.5 hours to print, print two for both ends. Print in TPU without supports, with the following parameters: Material: CR-PLA_1.75 Layer Height: 0.15mm Wall Line Count: 3 Top…

Pobrania
63
Polubienia
14
Ocena
5
P
Printablescho_O

Rancilio Silvia (V1) Ulka Pump anti vibration dampening holder

My 04' Rancilio Silvia's ULKA pump was getting pretty noisy. I opened it up and the vibration dampening holders of the pump were pretty saggy. I replaced them with these and the noisy reduction was quite obvious. Important: print it in a…

Pobrania
61
Polubienia
10
Ocena
5
P
PrintablesLee David

FLSun V400 Vibration Dampening Feet

Simple design using TPU and PETG to reduce the vibration from the FLSun V400 especially at high speeds.

Pobrania
60
Polubienia
11
Ocena
0

3D Printer Sound Dampening Enclosure

Check out my YouTube video on the making of this enclosure! We found out that the enclosure dampened the found output of the FlashForge Adventurer 5M by 10 decibels, as well as acting as thermal insulation to hold in the build area heat!…

Pobrania
60
Polubienia
27
Ocena
0
P
PrintablesStefan

Ender 2 Pro Dampening Feet

A remake to fit the dampening feet on Ender 2 Pro

Pobrania
59
Polubienia
8
Ocena
5
P
Printablesxvzf

3x 40mm (10mm) Noctua fan holder for e.g. Super6C. Noise dampening

This is a fairly simplistic fan holder for Noctua 40mm x 10mm Fans, including noise dampening. The fans are slightly pressed in the slots and make only contact with the rubber already integrated with the fan. It's designed to fit in the…

Pobrania
58
Polubienia
7
Ocena
0
P
PrintablesDFliyerz

MK3S Y-Axis Motor Mount Ultra -- Noise Dampening

IMPORTANT NOTE! I designed this before getting a paver to rest my printer on, and found that with the paver this mod actually increased noise. This mod does definitely reduce noise if you're not using a paver, and just trying to dampen…

Pobrania
58
Polubienia
10
Ocena
0
P
PrintablesJakub Fleischer

Modular Sound Diffusor/dampening Panel

This probably works better as a diffusor, than a Dampening Panel. I thought that it might trap sound in the small chamber. Cant test it for myself because my printer is slow af :( but Ill be happy if someone uploads a make :) The…

Pobrania
57
Polubienia
10
Ocena
0
P
Printablesmarkusdd

IKEA SIDORNA noise dampening wall angled connectors

SIDORNA walls are delivered with straight connectors if you want to build a longer wall with them, but if you need to go at an angle there is nothing offered. This replicates the original connector bars, but with adjustable angles. The…

Pobrania
55
Polubienia
2
Ocena
0
P
PrintablesLeo B

Vibration Dampening Microphone Mount for Clarinet (Spring Loaded, Toolless)

Edit: Photos are now posted, and Mk2.5 is now confirmed to work. Edit 2: There are now files for clarinets with an 80 mm bell, but those have a tab on the side instead of a receiver for the threaded insert. This thing is a system designed…

Pobrania
50
Polubienia
5
Ocena
0
P
PrintablesFreshAndClean

Ender style endcap and dampening feet

I was using an older model of dampening feet that fit into the extruded aluminum frame of my ender 3, but they would slide up and down the frame. This model builds them into the endplate to keep them at the corners for better vibration…

Pobrania
50
Polubienia
14
Ocena
0
P
PrintablesCederb

Sound dampening feets for Ultimaker 2 & 3

These feet use 50 durometer, 30 and 40mm half-spheres made out of the visco-elastic urethane rubber "Sorbothane" to reduce the amount of conducted vibrations by a lot, without the problems of self-induced oscillation of more springy…

Pobrania
48
Polubienia
4
Ocena
0
P
PrintablesEqu

Vibration-dampening squash ball feet

Vibration-dampening feet for the MK3/MK4 . Uses 4x double yellow dot squash balls. I wanted to make a version that does not add height to the printer to make it easier to fit into various enclosures. The design is inspired by several…

Pobrania
46
Polubienia
6
Ocena
5
P
PrintablesRunfreesight

K1 Max Main board fan mount - In TPU for noise dampening

Initially i did not see the original versions with one leg removed, and for the Max it can not have the forth leg as the LAN port is in the way. After printing and removing one leg i found the fan vibration to be resonating really bad and…

Pobrania
43
Polubienia
7
Ocena
0
P
Printables3DBob

Sound Dampening Anti Vibration feet for Prusa MK4 MK3

These feet attach to the 30x30 extrusion and are held in place with M6 x 10mm hex head cap screws. The vibration dampening is done by these 1 ½ inch Vibration Isolation Washer Rubber Isolation Pads:…

Pobrania
43
Polubienia
9
Ocena
0
P
Printableswerz 99

Vibration Dampening Feet

Printed from Ectrudr TPU Flex Medium.

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesJEBurroughs

Holy Stone HS175D Progressive Suspension Landing Strut Dampening system for Drone

This could be altered to accommodate many different applications. I am currently working on a version to use on the drawers and shower door in my Transcend Camper. I have uploaded a 10mm version that is quite a bit lighter and does the…

Pobrania
38
Polubienia
3
Ocena
0
P
Printablesblumlaut

Fractal Design North Noise Dampening Feet

A set of very simple TPU feet for the Fractal Design North, designed to (barely) fit over the stock feet, depending on your printer calibration it may need to be scaled up slightly, especially when using PETG or PLA. When using TPU print…

Pobrania
37
Polubienia
7
Ocena
0
P
Printablesmaxinator

Bambu Lab X1C Feet (vibration dampening with Silikon mold)

A simple foot for the Bambu Labs X1C. Print the feet with TPU and little infill or use the mold and cheap (Bathroom) Silikon to create nice damping feet. Pictures of the final silikon feet will be added soon.

Pobrania
37
Polubienia
7
Ocena
0
P
PrintablesTom Oinn

Squash ball vibration dampening feet

Two variations on a theme - both parts can be used interchangeably depending on your preference and to what you're attaching them. Print two parts and capture a squash ball between them to absorb vibration from one side. I use these to…

Pobrania
37
Polubienia
16
Ocena
0
P
PrintablesJacob Warner
Pobrania
37
Polubienia
10
Ocena
0
P
Printablestoscdesign

Sqashball feet for flagstone or concrete slab for vibration dampening of 3D Printers

This are for vibration dampening. You can mount them with adhesive tape on the back side of your flagstone or concrete slab. Settings: Infill: 30% Grid Supports: Yes Material: PETG / PLA Hint: print on the sqare side with supports

Pobrania
35
Polubienia
13
Ocena
0
P
Printableskwerkshop

AcoustiTile Sound Dampening for Cooler master Qube 500

A simple 3x3 module tile for the CoolerMaster Qube 500 side panels. To help mask some of the fan noise that may happen inside a PC. You may need to print multiple of these to cover the area you need. The inside has a dense come pattern to…

Pobrania
34
Polubienia
18
Ocena
0
P
PrintablesMattJohno

Ender 3 V3 SE/KE Dampening Noise Reduction Anti-Vibration Feet - Remix

Ender 3 V3 SE/KE Dampening Noise Reduction Anti-Vibration Feet - Remixed to fill in the gap on the bottom of the feet. May reduce Dampness but no supports needed.

Pobrania
32
Polubienia
6
Ocena
0
P
Printablesememable

Prusa Enclosure - Vent Cover with Dampening Insulation

Here goes another cover for the original Prusa Enclosure. Wasn't happy with the existing ones, so I quickly sketched and printed this one. I wanted to add some insulation to dampen the microphone like panels. Instead of printing a TPU…

Pobrania
32
Polubienia
7
Ocena
0
P
PrintablesColdbrewdi

GPU Stabilizer vertical (with dampening, parameterized)

This is a GPU Stabilizer in vertical orientation, designed to be put between the GPU and the case. The total height is changeable via a parameter in Fusion360. It consists of three parts, with the stand itself preferrably be printed in…

Pobrania
32
Polubienia
3
Ocena
0
P
PrintablesExtra Fox

PrusaXL Dampening Foot Mount

These feet are designed to mount a self-adhesive, dampening foot to the printer. I've gone with some 1.5" Hemispherical Sorbothane feet from Isolate-it , but you can use anything you'd like. Remove the existing feet, leaving the extrusion…

Pobrania
32
Polubienia
16
Ocena
0
P
Printablesphilon

Prusa XL side panel sound dampening mat template

I found my Prusa XL to be a little bit on the noisy end, and parts of the noise I attributed to resonance coming from the side panels. Ordered some 2mm (80mil) sound deadening mat from Amazon, and cut them to size using this template.

Pobrania
32
Polubienia
10
Ocena
0
P
Printablesblkhawk

ATX PSU vibration dampening gasket

This is meant as a vibration dampening gasket that goes between an ATX PSU and the PC case. Print with low infill for extra squishiness. Openscad source included. Print Settings Resolution: .2 Infill: .2 Category: Computer

Pobrania
30
Polubienia
9
Ocena
0
P
PrintablesKronocide

Dampening feet for simrig using squash balls

For best results, use low rebound squash balls (aka super slow balls) If you want dampening + no-slip , then do not print the bottom part (you have to use the split to object function anyway) Bottom part is only if you want it to be…

Pobrania
30
Polubienia
4
Ocena
0
P
PrintablesLuce

MK3S+ Vibration Dampening Feet

Vibration in your MK3S? Making your teeth ache and your head hurt? Found these dampening pads on Amazon. https://smile.amazon.com/dp/B08D9MDKD2?psc=1&ref=ppx_yo2ov_dt_b_product_details Designed a simple holder for them that attaches…

Pobrania
29
Polubienia
5
Ocena
5
P
Printablesaschmitz

Prusa XL Sound Dampening Feet - Sorbothane 1" Discs

Overview These feet are intended to be slipped directly over the existing feet for a Prusa XL printer, and over 1" diameter Sorbothane discs to dampen the vibrations from a Prusa XL. It appears moderately effective, although some larger…

Pobrania
29
Polubienia
5
Ocena
0
P
Printablessuhren

ASUSTOR AS5304T Vibration Dampening Feet

ASUSTOR AS5304T Vibration Dampening Feet These are vibration dampening feet for the ASUSTOR AS5304T NAS, that are printed in two parts using flexible filament. While the AS5304T NAS from ASUSTOR is a relatively quiet NAS when it comes to…

Pobrania
27
Polubienia
9
Ocena
0
P
PrintablesCohens Customs

Blue Snowball Dampening Mount

Blue Snowball Dampening Mount. The elastics are regular sized hair elastics I bought at the dollar store. Mounting Hardware for the stand can be attached via a M3 bold through the middle. The model consists of 3 pieces, outer ring, inner…

Pobrania
27
Polubienia
11
Ocena
0
P
PrintablesPlexi

3D Printer Vibration Dampening Feet

I was running my printer on a piece of carpet to isolate vibration. I've been looking for a more permanent solution and saw that some people have used tennis balls with attachment mounts. I wanted something smaller and found these foam…

Pobrania
26
Polubienia
8
Ocena
0
P
PrintablesStigern

Ikea Lack Dampening (using washing machine dampers)

Simple feet for lack tables, using a press-fit solution for typical washing machine dampers. I got my rubber dampers from AliExpress.

Pobrania
26
Polubienia
3
Ocena
0
P
PrintablesAediel

Prusa MK4S, MK4, MK3S Sound Dampening Feet

Since I liked the model by Extrutim really much, and wanted its effect for my MK4S, I made a similar model. As dampener I used the green ones by Polysound (I didn't test others), which are available on Amazon…

Pobrania
25
Polubienia
16
Ocena
0
P
PrintablesFuzzino

3D Printer Foot Mount with Vibration Dampening.

MechSmith's Foot Mount works great to lock the feet into place. I however experimented with it a little bit and used Autodesk Fusion to turn it into a damper / absorber. This was originally meant for the FlashForge AD5X but it should work…

Pobrania
25
Polubienia
12
Ocena
0
P
Printablescarl

4040 Extrusion foam dampening feet

Hello, I had to make more room under my ender 3 pro, and had some foam pads laying around for dampening washing machines. I couldnt find a model which support that, so I made my own simpel model. The only requirements being that it had…

Pobrania
25
Polubienia
2
Ocena
0
P
Printableso._sim_.o

Dampening Feet for Wesco Trash Can Insert

Really simple solution for a really annoying problem. I wonder why Wesco doesn't supply something like this by default with its trash cans. The inserts out of sheet metal sit directly on the ground, thus making a horrible noise whenever…

Pobrania
25
Polubienia
3
Ocena
0
P
PrintablesDR_TOBOGGAN_MD

ANTI VIBRATION ISOLATION DAMPENING FOOT - PRINT OR MOLD

Vibration Isolation Dampening Feet There are two manufacturing options for producing these dampening feet: Direct 3D Printing – Utilize TPU or a similar elastomeric polymer. Mold and Cast – 3D print a mold and cast the feet using…

Pobrania
23
Polubienia
6
Ocena
0
P
Printablesnivekmai

Moonlander Sound Dampening Foam

Cut files for noise reduction foam for the top of the Moonlander keyboard. I cut this using the Snapmaker 10w laser cutter with Lightburn. Cut settings were speed 1800mm/m power 90% passes 1 This cut setting worked for 2 types of foam…

Pobrania
22
Polubienia
8
Ocena
0
P
Printablesp_fabi

Sofle Keyboard case (plates) with heat-set inserts and TPU dampening pad

Recently, I built the famous Sofle Keyboard (RGB PCB version in my case). I was trying to find even a simple case. I couldn't find anything that would satisfy my needs, since looks like many people design cases without using heat-set…

Pobrania
21
Polubienia
4
Ocena
0
P
Printablessimolux

vibration dampening feet for 4040 alluminum extrusion

Hi there! this is my attempt at creating some vibration dampening feet for my ender 3 pro, but this will work with any printer frame that uses 4040 or 4020 extrusions as frames. This design uses small 31mm (diameter) bouncy balls that we…

Pobrania
21
Polubienia
4
Ocena
0
P
PrintablesEduGomes

TPU foot for 3030 profile. Vibration dampening.

TPU foot for 3030 profile. Vibration dampening. Print Settings Printer: Hypercube Hevo Rafts: Doesn't Matter Supports: Doesn't Matter Resolution: 0.15 mm Infill: 33% Gyroid Filament: Generic TPU Notes: You can adjust the infill according…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesMojee3D

Dampening Feet for Ender 3

Dampending feet for an Ender 3 that uses Nerf Rival balls. They slide onto the extrusion and have holes for securing with t-nuts. However, they usually don't require t-nuts since they are a secure fit already. I just used CA Glue to keep…

Pobrania
19
Polubienia
8
Ocena
0
P
PrintablesRanger6

Levelling feet with dampening adapter

The levelling feet can be used with https://www.thingiverse.com/thing:3316671 I have also designed a foot which doesn't have the small holes for the dampeners if you just want them on their own Print Settings Printer Brand: Creality…

Pobrania
19
Polubienia
1
Ocena
0
P
Printablesporks0da

Vibration Dampening Feet For Table

I made this for the desk my MK4 sits on to reduce noise transfer to the downstairs neighbours. Uploaded by request, I recommend splitting the feet up and printing one at a time due to the stringy nature of TPU. My table had a cross brace…

Pobrania
19
Polubienia
6
Ocena
0
P
PrintablesJK

Magnetic Dampening Springs for Washing Machine

I designed these magnetically preloaded dampening springs to reduce vibration and improve stability in my washing machine. The system uses repelling permanent magnets embedded inside a solid 3D-printed housing to create a contactless…

Pobrania
18
Polubienia
2
Ocena
0
P
PrintablesThomas

Dampening Pad Silicone Mold for 3D Printer

I was getting a lot of noise from my delta style 3D printer vibrating on top of my wooden workbench so I decided to mold some feet from a silicone recipe I found. I plan on filling the mold with the silicone and then use M4 socket head…

Pobrania
17
Polubienia
3
Ocena
0
P
PrintablesdePrintinator

Schiit Sol Turntable - Height Adjustable Vibration Dampening Feet

Worked with a friend to create custom feet for his Schiit Sol turntable. They are height adjustable, and vibration dampening. The original feet fit inside of the mod, so if you ever want to remove them or resell the turntable, you won't…

Pobrania
16
Polubienia
2
Ocena
0
P
PrintablesCoat

Dampening feet, all printable

Dampening feet for square cases, printers, machines etc.. Hull: The hull for the dampeners comes in two versions, normal and heavy duty. It fits on a 2020-frame, but can also be used on other materials. Dampeners: This thing is originally…

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesExtra Fox

PrusaXL Dampening Foot Mount - 52mm

Feet to mount 52mm or smaller Sorbothane hemispheres.

Pobrania
15
Polubienia
3
Ocena
0
P
PrintablesMichi

Fan Dampening

Hi originally made this for the fan that cools the motherboard of my anycubic predator but i guess u can use it for all surface mount fans. just print it one or two times depending on the way you mount your fans. Its meant to be printed…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablesb3n3d1k7

Nema 17 bowden extruder 2020 Mount with resonance dampening

If you have ever mounted a bowden extruder directly to a 2020 aluminium profile you most likely know what resonance is :-) To avoid the annoying noise caused by resonance I created this mount which allows you do decouple your nema-17…

Pobrania
14
Polubienia
2
Ocena
0
P
PrintablesLawrence Allen

4040 T Slot End Cap Adjustable Anti Vibration Dampening Feet Foot

A universal-fit end cap antivibration foot for 4040 T-slot aluminium profiles, help to dampen any movement from any 3D printer sat on top.

Pobrania
14
Polubienia
2
Ocena
0

Spacebar Mod Sound Dampening TPU Inlay Keychron K8

I noticed that people were using foam, toilet paper, or adhesive putty to fill their spacebars and reduce the hollow sound. This inspired me to create a custom fitting inlay with TPU. Printed with Prusament TPU 95 Shore, but I believe you…

Pobrania
13
Polubienia
2
Ocena
0
P
PrintablesCWP3DPrints

SPRING DAMPENING FEET

Thank you for your interest in my design! even though its simple and crude I feel it is very effective. please let me know your experience with it if you print and use! Updated! 5-20-22 Flush Top version, no supports needed! Original…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesChrissels

Vibration Dampening mount for PSU of E3D ToolChanger

When printer my ToolChanger made a lot of noise. It turned out to be coming from the PSU (see video.) I made this vibration dampening mounts for the PSU to make it silent again. I printed the dampener parts (A & B) with NinjaFlex, 0.2 mm…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesHamilcar

MK4S vibration dampening feet

A vibration dampening foot for the MK4/MK4S frame. It is designed to go on the inside of the frame so that the MK4 toolbox (https://www.printables.com/model/508680-mk4-tool-box) can still fit on the outside. It is also designed to use a…

Pobrania
12
Polubienia
9
Ocena
0
P
Printablesbernieke

Lasercut base for MK3S+ electronics and PSU with room for dampening foam and paver tile

I purchased a BLV enclosure kit (https://www.printables.com/model/73738-blv-enclosure-beta), but didn't want to leave my PSU and electronics inside, so designed a lasercut base for the enclosure to hold the PSU and electronics. It is…

Pobrania
11
Polubienia
2
Ocena
0
P
Printablesgtorelly

Foam supported dampening feet

I've created dampening feet for my printer (Metamaquina 2) to reduce its noise and reduce vibrations. I believe that the machine works better if its frame is able to move a little bit, reducing the stress on the structure while printing…

Pobrania
9
Polubienia
3
Ocena
0
P
PrintablesGraham Hickson

Technics 12xx Dampening Cups

Cups which allow Technic's turntable to sit on foam padding cleanly without leaving layers of padding on show. Just add foam as desired and you are good to go.

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesLabrat

Vibration-dampening feet for a floor fan

Material: TPU/TPE. Number of perimeters: 1-3 (for TPU A95) or 2-4 (for softer filaments). For optimal performance, for the "Side feet" model, use 1-2 perimeters up to 18 mm height and 3-6 perimeters above 18 mm. Top layers: at least 5 (1…

Pobrania
7
Polubienia
3
Ocena
5
P
PrintablesTanner

Basic tpu Vibration dampening pads

Would recommend your own print settings. I printed these in tpu and they are made on and for my prusa mini+ howver im sure they could be useful with other printers i would recommend adjusting the infill to have 4 parts with the same…

Pobrania
7
Polubienia
0
Ocena
0
P
PrintablesRafał Kar

DF54 grinder vibration dampening feet

I've designed improved feet for the DF54 grinder. The idea was initially inspired by the V-shaped silicone feet from a broken cutting board that I placed under my DF54. Silicone has excellent vibration-dampening properties, and those feet…

Pobrania
7
Polubienia
1
Ocena
0
P
PrintablesSvB

Position Dampening RC Car Shock Sleeve

##### Highly Experimental ##### This model is highly inspired by the sotar shock damping system . It works on the same principles. It allows the variant flow rates based on piston position. The model has parameters defined so you can…

Pobrania
6
Polubienia
2
Ocena
0

Viair c380 compressor dampening foot

a small insert to help dampen vibration of Viair 380c compressor. Centre hole 3mm, washer needed to stop it from pulling out. tapered for snug fit, short base to minimise clearance height. printed in TPU 90 with 2 wall and 10% infill

Pobrania
6
Polubienia
0
Ocena
0

Vibration Dampening Sorbothane Disc Foot Mounts for Ender 3

I had cut up a yoga mat as as dampers for my Ender 3, but after awhile I found that they were flattened. Not wanting to mess around anymore, I thought I'd do the foot thing right and did some research. I ended with the Sorbothane discs as…

Pobrania
6
Polubienia
0
Ocena
0
P
PrintablesMega Making

Vibration dampening feet (Sturdy and effective)

Follow the picture on how to assemble, it is pretty straight forward. Just use some 12mm M4 screws to hold them together. Category: 3D Printer Parts

Pobrania
6
Polubienia
1
Ocena
0
P
Printables3D3D

Core One L Feet Vibration Dampening TPU Bellow

Hey All. First Off, Thank you Prusa Team, for with out you this and many other things wouldn't have been possible. Second, Born out of Need for me and what I'm doing with the CO1L, So, bare with me, but i wanted to get these live before i…

Pobrania
5
Polubienia
2
Ocena
0
P
PrintablesAnton

Tricopter Camera+Battery Vibration dampening mount

Tricopter Camera Vibration Dampening Mount. Using Piano Wire 1.5mm diameter. Also included plate for soft mount rubber dampeners used for flight controllers in combination with standoffs. This version is 10 grams lighter…

Pobrania
5
Polubienia
0
Ocena
0
P
Printables0dysseusRex

Vibration-dampening Wall Anchor for Tables and Storage Racks

This is a vibration-damping wall anchor for tables or storage racks. Printers like having a stable platform, and these anchors are a cheap way to add some rigid support. Print with tpu, with the side opening down, without supports. 4…

Pobrania
4
Polubienia
2
Ocena
0