Wyniki wyszukiwania: hgx

Sortowanie

Liczymy pasujące modele…

P
Printablesmajek

HGX Lite 2.0 (oblique tooth) extruder mock-up model

This is mock-up model of HGX Lite 2.0 extruder (with oblique tooths). Outlines are just traced in Inkscape and extruded in OpenSCAD. Model is quite accurate. In OpenSCAD source you could find all coordinates of holes and motor position.…

Pobrania
831
Polubienia
35
Ocena
5
P
PrintablesBrooks

HGX Lite Extruder Shell with 16mm Shaft

I wanted to use LGX Lite Extruder FDM case model by SIVIS, but I couldn't sand down the shaft. Therefore, I made a hole to allow the latch to move freely. rotation_distance 53.494165 gear_ratio 44:10, 37:17 Re-calibrate your own value for…

Pobrania
797
Polubienia
126
Ocena
5
P
PrintablesDruckzeug

Stealthburner HGX Lite mount

Die einfachste Methode einen HGX Extruder mit einem Stealthburner zu verheiraten. Der Adapter von djos_1475 ist sehr simpler Adapter um einen Orbiter Extruder mit einem Stealthburner zu betreiben. Der HGX (billigkopie eines LGX) hat…

Pobrania
552
Polubienia
53
Ocena
5
P
PrintablesTijmenbo

Voron Dragon Burner hgxlite mount with filament sensor

I'm working on a stealtchanger and wanted to intergrate a filamentsensor in the toolhead, additionally you will need a 5,5mm steel ball, 2x m3x35mm bolts and a D2F-L microswitch

Pobrania
420
Polubienia
73
Ocena
5
P
PrintablesMilli

EVA 3 HGX LITE drive mount

Mount for HGX extruder with 43.5mm mount holes spacing

Pobrania
388
Polubienia
51
Ocena
5
P
PrintablesDylan Thurston

Clockwork2 Large Gear HGX - ECAS - ERCF Filament Sensor - Filametrix

1-26-There is a new main body and a new cutting arm (to replace the cutting arm from filametrix). The standard cutter arm doesn't allow for enough movement to cut the filament with the larger guidler. This uses the latest model from the…

Pobrania
333
Polubienia
39
Ocena
1
P
PrintablesTechX

ProtoXtruder HGX xtra rigid back

I realy like the design of the ProtoXtruder HGX and just gave it an additional brace on one motor mount. Its almost no added weigth but stiffens the arm a fair bit. Remix of the great work of @nhchiu:…

Pobrania
332
Polubienia
53
Ocena
5
P
PrintablesJoseph

Stealthburner HGX MOD

This is Stealthburner with HGX extrude gear MOD.

Pobrania
305
Polubienia
57
Ocena
5
P
Printablesonodono

Ender 3 V2 - HGX Lite Extruder - TZ E3 Hotend - Satsana - 5015 - BL Touch

This is my current setup for my Ender 3 V2. It has: TZ E3 hotend HGX Lite extruder Satana shroud 5015 fan BL touch I designed the Extruder mount/adapter plate and modified the Satsana to fit the TZ hotend Category: 3D Printer Extruders

Pobrania
276
Polubienia
44
Ocena
5
P

HGX Light and ORBITER extruder and v6 hotend for ender 3 ( BL-touch )

Used bear upgrade files for prusa i3,edited it to fit on ender 3 x axis plate and added mount for HGX light and ORBITER 2.0 extruder. All printed with 0.2 layer hight. use ABS or PET-g Nuts and bolts needed: 3 x m3 square nut (2 extruder…

Pobrania
273
Polubienia
41
Ocena
5
P
PrintablesVC Design

Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch)

Direct Drive Bracket for Ender 3 V2 (Compatible with Sherpa Mini, HGX Extruder, LGX Extruder, ProtoXtruder, and BL Touch) Description: Upgrade your Ender 3 V2 with this versatile direct drive bracket. Compatible with Sherpa Mini, HGX…

Pobrania
268
Polubienia
45
Ocena
0
P
PrintablesPaul Trautner

Hgx twirl gear CW2 Extruder for Stealth burner

Updated the design to work with the “twirl” version of the HGX gears. Support is needed for the pocket that the motor sits in. Print quality is on par with Galileo 2 or better Twirl gear:…

Pobrania
249
Polubienia
21
Ocena
0

HGX Lite 2.0 Stealthburner extruder adapter

Printed with standard voron settings: 5 upper and lower layers, 4 walls, 50% gyroid infill.

Pobrania
236
Polubienia
28
Ocena
0
P
PrintablesH3DA Components

Mount with USB strain relief for EBB36 CAN V1.2 and HGX Lite extruder and similares

Description Even high-quality USB-C cables can experience issues when the toolhead moves rapidly across the print area. The sudden movements and forces can create tension on the cable, potentially leading to intermittent disconnections or…

Pobrania
222
Polubienia
28
Ocena
5
P
Printablesdanio_298

SB2209 Large Gear Clockwork2 HGX (and FilamATrix alpha version)

A small remix of Large Gear Clockwork2 HGX that allows you to use SB2209 RP2040. Also available in Meowburner version. There may be minor errors in the model. SB2209 CAN (stm version) not compatible Based on user feedback, support for the…

Pobrania
210
Polubienia
27
Ocena
4,5
P
PrintablesContomo

HGX-Lite Filament runout sensor

Runout sensor for the HGX-Lite Measured in CAD theres about 23mm from trigger point to extruder gears not gripping anymore. so 20mm would be a safe “delay distance” or “extrude after runout” distance for this. assembly: - make sure the…

Pobrania
198
Polubienia
42
Ocena
5
P
PrintablesJared

HGX-Lite Filament Sensor

Simple filament sensor for the HGX-Lite. Requires the following parts: Switch: D2F-01F3L-D3 2 - M2x10 self tapping screws 1 - ECAS fitting with bottom plastic/rubber removed 1 - M3x6 Screw I recommend these switches as they have fairly…

Pobrania
191
Polubienia
42
Ocena
5
P
Printablessayak panja

Hgxlite DragonBurner mount

simple dragonburner mount for the hgx

Pobrania
159
Polubienia
16
Ocena
0
P
PrintablesBrynD

Ender 7 Crazylite 7 Toolhead - Creality Spider V3 Pro Hotend - LGX or HGX extruder

Description: Lightweight Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic appearance. Giving a clear view of the nozzle from above, perfect for watching the first print…

Pobrania
158
Polubienia
24
Ocena
5
P
Printablesprouting

FLsun SR HGX 2.0 Bambu Direct Drive Extruder

Direct Drive for FLsun super racer with Bambu hotend and HGX 2.0 extruder This compact extruder claims light weight and high grip M3 inserts of OD4.5mm Length 3mm for fixing the bamboo heatsink and for effector plate M2.5 insert Length…

Pobrania
152
Polubienia
25
Ocena
0
P
PrintablesBrynD

Thunder 7, Ender 7, Budget Integrated HGX direct drive extruder & Bambu Hot End Toolhead.

Updated 01.04.24, Revised back plate now Rev2 . Misaligned bolt hole corrected. Budget direct drive extruder, lower cost alternative to the Bondtech LGX Lite. Uses low cost HGX gear sets & 36mm pancake round stepper motor available from…

Pobrania
145
Polubienia
27
Ocena
0
P
PrintablesPaul Mironov

Neptune 4 HGX Fan5015

I will be glad to have your support for my projects! https://boosty.to/mironovpaul/donate Good afternoon, friends! I really liked the extruder with three 5015 fans, and I wanted to improve it by installing a more efficient feeder and a…

Pobrania
140
Polubienia
60
Ocena
5
P
Printablesm0k2001

Mini Stealthburner HGXLite

When building FDM LGX lite from : LGX lite Extruder FDM case par SIVIS | Téléchargez gratuitement un modèle STL | Printables.com I realized that the cas what slightly deeper and it could not fit in MiniSB designed for LGXlite. So I just…

Pobrania
132
Polubienia
38
Ocena
0
P
PrintablesGumo Design

HGX LITE to SV06 mod

Additional parts you need to buy : HGX LITE, 3030 radial fan, 6mm heat-break for Ender3 S1 Pro, and a Super Pinda. The most difficult part is that I wider the outlet of the HGX case into 6mm, for the S1 Pro heat-break to insert. The HGX…

Pobrania
129
Polubienia
25
Ocena
5
P
PrintablesBotio

EBB36/SHT36 HGX Lite front mount plate with short cable strain relief

EBB36/SHT36 HGX Lite front mount plate with short cable strain relief

Pobrania
127
Polubienia
12
Ocena
0
P
PrintablesGrimm Creations

XOL HGX Lite

Print settings are the same as Voron Standard. This will need to be printed with Supports

Pobrania
125
Polubienia
8
Ocena
0
P
Printablesasdw white

HGX Lite Sapphire Pro Mount

Use 1.6mm wall %20 infill. I used PETG and it is very solid.

Pobrania
118
Polubienia
8
Ocena
5
P
PrintablesBrynD

Ender 7 Crazylite 7 Toolhead - Bambulab A1 Hotend - LGX or HGX extruder

Description: Lightweight Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic appearance. Giving a clear view of the nozzle from above, perfect for watching the first print…

Pobrania
116
Polubienia
22
Ocena
0
P
PrintablesMrx51

ugly toolhead HGX or sherpa mini top plate remix

this is a top plate to accomodate hgx or sherpa mini extruder patern, extruder hole designed to work with M3 insert

Pobrania
112
Polubienia
14
Ocena
0
P
Printablesru_di_y

HGX direct extruder Tronxy X5SA

HGX direct drive mount for Tronxy X5SA

Pobrania
111
Polubienia
17
Ocena
5
P
PrintablesBrynD

Ender 7 Crazylite 7 Toolhead - Bambulab X1 Hotend - LGX or HGX extruder

Description: Lightweight Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic appearance. Giving a clear view of the nozzle from above, perfect for watching the first print…

Pobrania
111
Polubienia
20
Ocena
0
P
Printablesα2ω

Artillery SWX3 X3 HGX lite v2/Bambu-Lab

Replacement head for X3 ARTILLERY printers. Almost identical dimensions, no difficulty in swapping. A high-performance hotend the HGX lite 2.00, 48gr, very light ! with large drive wheels does not crush the filaments so the flow will be…

Pobrania
110
Polubienia
14
Ocena
0
P
PrintablesSergey Sergeev

FlashForge Adventurer 5M/5M PRO HGX 1.0 Extruder

Here's new extruder for ff5adm based on HGX 1.0 gears. More grip, more consistent extrusion, 9 gramms heavier. What you'll need: HGX 1.0 extruder kit m3x12 screw(from original extruder) m3x14 screw m3 heat insert You'll have to dremel the…

Pobrania
107
Polubienia
44
Ocena
5
P
PrintablesBrynD

Ender 7 Crazylite 7 HGX Extruder

These are the additional parts that are required to complete the Crazylite 7 HGX direct drive extruder assembly. The HGX extruder uses the same commonly used 36mm diameter stepper motor as found on the Bondtech LGX lite extruder, with a…

Pobrania
104
Polubienia
24
Ocena
0
P
PrintablesWANNA

HGX / Sherpa mini adaptor

Design for V6/Dragon adaptor and easy maintenance combo with my adapter design https://www.printables.com/model/947885-universal-adaptor-for-vzbot-printhead Used x2 M3 Heat insert nut 3x5x4 x2 10mm M3 Countershunk (if u use my V6 adaptor…

Pobrania
99
Polubienia
13
Ocena
0

LGX Lite spring tensionner conversion (HGX)

Modified this remix of a remix to be able to convert a Bondtech LGX Lite to the spring tensionner mechanism of the HGX. Parts needed that are not included from the original LGX - 7x M3 Heatset Inserts (Voron Type, M3 x 5 x 4) - 1x M3x8…

Pobrania
93
Polubienia
23
Ocena
4
P
PrintablesMina

HGX 2.0 (Oblique Tooth) DragonBurner Mount Aligned Boss

This is a modification of the work of two others. This version should fit and be aligned with the DragonBurner V8 toolhead. I am working on a TapChanger build and printed the origninal model earlier today and to my dismay the TapChanger…

Pobrania
83
Polubienia
16
Ocena
5

K1 Extruder HGX Gears

Consider this a WIP despite having using this extruder for about a month with great and reliable performance. Build documentation will come along the way. To fit this extruder material has to be removed from the carriage. As shown on this…

Pobrania
81
Polubienia
29
Ocena
0
P

ANOTHER HGX2.0 EXTRUDER

i designed this extruder from scatch trying to get the assembly more rigid for speed purposes. the layout follows the hummingbird/lgx-lite standard. the heat insert holes could not be standard, but i found mine touching the gears, so i…

Pobrania
80
Polubienia
14
Ocena
5
P
Printables晚杯琦礼

hgx extruder using s44 stepper motor

我受不了这些傻逼小直径步进电机的价格,不仅内阻又高发热严重而且提供的扭矩也很小,所以我把hgx挤出机适配到了更常见也更便宜且自带齿轮的步进电机上,这些电机可以在较低转速下提供更高的扭矩,发热也很低 I can't stand the silly prices of these small diameter stepper motors. They not only have high internal resistance and severe heat…

Pobrania
79
Polubienia
7
Ocena
0
P
PrintablesHans

HGX 2.0 Oblique Tooth And Sherpa Micro Adapter Plate

An adapter to mount the HGX 2 to the Rook 2020 Mk2. https://www.aliexpress.com/item/1005005911670091.html BOM: 3x M2,5x6 BHCS (to screw the plate to the extruder) 2x M3x6 SHCS (to screw the plate to the toolhead) The SHCS on the right (as…

Pobrania
78
Polubienia
11
Ocena
0
P
PrintablesJeeAre

Drive HGX Lite V2.0 for EVA 3 Plattform

Etwas tricky mit den Schrauben, es werden M3 mit 8-10mm benötigt die eine möglichst flachen Kopf haben. Ich habe M3 Zylinderkopf Schrauben mit 2mm hohen Kopf genommen. Das zweite sind die schrauben der vorderen Befestigungslöcher diese…

Pobrania
75
Polubienia
10
Ocena
0
P
PrintablesTheogan Naidoo

HGX 2.0 (Oblique tooth) Dragon burner mount

HGX extruder mount for the Dragon burner

Pobrania
70
Polubienia
11
Ocena
2
P
PrintablesBrynD

Ender 7 Crazylite 7 Toolhead - Mosquito Hotend - LGX or HGX extruder

Update: 27.04.20. Missing print support added. Description: Lightweight Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic appearance. Giving a clear view of the nozzle from…

Pobrania
69
Polubienia
18
Ocena
0
P
PrintablesHans

HGX Lite and HGX 2.0 Single Drive Gear Mod

I wanted to improve the extrusion consistency of the HGX Lite and HGX 2.0 oblique tooth extruders by converting them to single drive gear. For reference: https://www.youtube.com/watch?v=c6JmCdovE0U Unfortunately i didn't have done…

Pobrania
69
Polubienia
24
Ocena
0
P
PrintablesMarik Komarik

Mordor V6 for Ender 3 (Sherpa Mini and HGX Lite extruders)

Please make sure you pre-thread the holes with a bolt and a lighter. Use torx wrenches to gently widen the holes when something doesn't fit. I'm running this made out of PLA for close to 3 months now, no issues so far. Please note that it…

Pobrania
68
Polubienia
14
Ocena
0
P
Printablesprtcl3

MAK Vector - HGX Lite, CR-Touch, Fan Mount

A remix to allow for the use of a HGX Lite (or Sherpa Mini, though untested), CR-Touch with the MAK Vector duct, and adds a mount for a 30mm fan onto the duct. The mount piece has also been extended slightly for an easier fit of the…

Pobrania
67
Polubienia
9
Ocena
0
P
Printablesprouting

Flsun SR effector with HGX Lite V2 / LGX Lite and X1 Bambu Hotend or TZ V6 Hotend (Tests)

All-in-one House/effectors for the FLSUN Superracer with HGX Lite V2 Extruder and X1C Bambu Hotend and TZ V6 Hotend Update: Added Effector/house LGXLite/HGX Lite Combo with X1C Bambu Hotend Also Houses for original effector. Need Effector…

Pobrania
65
Polubienia
14
Ocena
3
P
PrintablesFelix Oberfeld

HGX-Lite runout sensor

Required Hardware 1x M3 screw (6 mm length) 1x M2 screw (12 mm length) 1x 8 mm Bowden/PTFE adapter 1x Omron D2F microswitch 1x M3 heat-set insert (4.2 mm outer diameter in my version – adjust if needed) 6-7mm piece of Bowden tube

Pobrania
64
Polubienia
14
Ocena
5
P
PrintablesBarrnet

Flying Bear Ghost 6 Adapter plate for Sherpa Mini/HGX Lite

This is a simple plate to mount the sherpa mini extruder instead of the standard extruder. It can be printed in PLA, but if you often print in ABS or other materials that require a closed chamber it is best if printed in ABS, ASA and…

Pobrania
63
Polubienia
4
Ocena
0
P
Printablessyfq91

HGX Lite mount for Ender 5

Requires 2 M3 heat insert

Pobrania
62
Polubienia
7
Ocena
0
P
PrintablesIshay Trattner

HeroMe Gen7 HGX extruder mounting plate

Mounting plate for the HeroMe Gen7 HGX extruder. Serves as the interface between the extruder and the main body. I printed it in ABS with 10% infill.

Pobrania
57
Polubienia
4
Ocena
0

XOL Toolhead extruder mount for HGX Lite 2.0

Remixed from XOL Toolhead for Orbiter 2.0

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesSergey Sergeev

FlashForge Adventurer 5M/5M PRO HGX 2.0 Extruder

Here's the remix of my HGX 1.0 extruder for ff5adm based on HGX 2.0 gears. But you'll still need HGX 1.0 main gear, because it's longer than 2.0. Or you can print it from nylon (PA) or POM with 0.2 nozzle if you can. I tried, but my…

Pobrania
54
Polubienia
17
Ocena
0
P
PrintablesProwlerON

ProtoXtruder Back plate mount for HGX-lite gear kit (Back_HGX.stl)

I wanted something compatible with my Voron 0.1, as I had cables already pulled, and crimped. I am not ready to convert it over to the newer carriage for the V0.2. I used the supplied design files from nhchiu@nhchiu and used the same…

Pobrania
51
Polubienia
10
Ocena
0
P
Printableszjebdzej

Ender 3 Satsana with HGX 2.0 and E3 Hotend

Hi there, this is my remix of the famous satsana fan shroud. It accomodates BL Touch, 5015 Fan, HGX extruder 2.0 and E3 hotend. Try to print the back piece first to see if it fits the screw standoffs. The support between the back piece…

Pobrania
51
Polubienia
9
Ocena
0
P
Printablesminilogique

HGX Lite single-gear drive idler arm

First, look the video Extrusion Quality - Mystery issue resolved ! (youtube.com) I watched it myself after I was bored and decided to give it a go on my HGX Lite extruder that I have used for about 500-600 hours now. Extruder is about 9…

Pobrania
51
Polubienia
15
Ocena
0
P
PrintablesMario L

AeroHGXtruder NX for ARTILLERY SIDEWINDER X1/X2

Project Description If you have a Titan Aero clone printer, would like a new extruder with a large gear to feed the filament, and don't want to spend $100 or more on a new extruder, then this project is for you. Benefits of the new…

Pobrania
50
Polubienia
28
Ocena
5
P
PrintablesHells

[Prototype] Ender 3 HGX Lite + E3D V6 Hotend (Left Handed BL-Touch)

THIS IS A PROTOTYPE, CHANGES ARE COMING SOON. This uses the same Mounting block, Duct and Duct Backing as the original model available here . Changes include: Rounded edges for better strength with lower infill/walls for lower weight.…

Pobrania
50
Polubienia
6
Ocena
0
P
PrintablesSergey Sergeev

FlashForge Adventurer 5M/5M PRO HGX 2.0 (ONLY) Lightweight Extruder

Ok this time you don't need to grind anything, but you need to print one gear out of PA or POM with 0.2 (0.25) nozzle. That's important because you need 2 lines on the gear teeth. What you'll need: HGX 2.0 extruder kit m3x12 screw(from…

Pobrania
50
Polubienia
9
Ocena
0
P
PrintablesBrynD

Ender 7 Crazylite 7 Toolhead - E3D Revo CR Hotend - LGX or HGX extruder

Description: Lightweight Ender 7 replacement toolhead with direct drive extruder, integrated bed mesh probe, improved cooling and cosmetic appearance. Giving a clear view of the nozzle from above, perfect for watching the first print…

Pobrania
49
Polubienia
8
Ocena
0

XOL Toolhead extruder mount for HGX Lite 2.0 - TAP

Remixed from original and adapter to Hgx Lite 2.0 Use voron settings and settings from XOL github

Pobrania
48
Polubienia
5
Ocena
0
P
Printableszjebdzej

HGX Lite 2.0 Satsana extruder mount

Remix of extruder mount (by @onodono) for HGX Lite 2.0 with different mounting holes

Pobrania
48
Polubienia
9
Ocena
5
P
Printablesftl_c-ian

Rook Evolution HGX Lite Extruder Mount with recessed PIS Mount

Added new holes with heatsets to mount HGX Lite Extruder. Also modified mounts to use shorter m3 bolts and modified the PIS mount to use heatsets requiring longer bolts. Does shorten Y travel a bit as the extruder motor sticks out a bit.

Pobrania
46
Polubienia
9
Ocena
0

Ender 3 NG 1.2 HGX Lite 2.0 & EBB36 adapters

Hello, this is my first model uploaded here :) I have made adapters for parts I use in my E3NG. You need to thread spacers. I printed it with ABS with Voron settings (4 walls, 40% infill, 4 top and bottom layers) Hardware used: M3x8 x6 M3…

Pobrania
44
Polubienia
5
Ocena
0
P
Printablesbuilder_takuya

HGX 2.0 (Oblique tooth) Dragon burner mount(Modified

HGX2.0 extruder mount for the Dragon burner https://www.printables.com/model/1389807-hgx-20-oblique-tooth-dragon-burner-mount オリジナルのモデルは↑です。 作成感謝! 組み立てやすいようにネジ穴などを調整しました。

Pobrania
43
Polubienia
3
Ocena
0
P
Printablescpp0xc0ffeeee

Papilio Lite extruder HGX r3.1 with shoulder screws

The goal is to solve the overtightening situation. The original assembly method is to manually feel the tightness by moving gears; it works fine, but I want to try other methods. The idea is to use shoulder screws to limit how deep the…

Pobrania
40
Polubienia
10
Ocena
0
P
PrintablesAndrey Orlov

[MAK Vector Duct] Adapter for HGX Lite v2.0 extruder

Adapter for HGX Lite v2.0 extruder https://sl.aliexpress.ru/p?key=IiBE3s1

Pobrania
39
Polubienia
2
Ocena
0
P
Printablesthatguyisjames

The100 HGX-Lite (Sherpa Mini) Mount

My normal bowden connector kept slipping out of the hole on my HGX-Lite. Made a mount that holds the extruder (upside down) and uses a more securely held M10 bowden connector. The larger M10 style is needed, as the tube passing though and…

Pobrania
39
Polubienia
8
Ocena
0

MBOT3D MK2 Remix for HGX Lite

Important: This is a remix of https://grabcad.com/library/mbot3d-extruder-mk-2-mod-1 by Ahmad Sunardi I only modified the main fan cover to shorten it a little bit to fit the HGX Lite mount I designed, it is not perfect... I have uploaded…

Pobrania
37
Polubienia
5
Ocena
0
P
PrintablesSergey Sergeev

FlashForge Adventurer 5M/5M PRO HGX 2.0 Lightweight Extruder

Now it weights the same 41 gramms as original FF Extruder

Pobrania
36
Polubienia
4
Ocena
0
P
PrintablesEmilio

Anycubic i3 mega HGX LITE extruder x_carriage

I built this model to mount the hgx lite extruder on the anycubic i3 mega. I used E3D-V6 1.75mm heatsink, TriangleLab CHC KIT Ceramic heating core, Mellow V6 Plus Adapter (15mm total height), a classic v6 nozzle and a 5015 blower fan.…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesZ3c0

Jabberwocky Adapt metal HGX Gear

Three gears broke, so I decided to make a minor modification to the Jabberwocky extruder. you will need this…

Pobrania
34
Polubienia
10
Ocena
5
P
PrintablesEvgenius

Flsun SR direct drive HGX and two 5015 fan

Flsun SR direct drive HGX and two 5015 fan

Pobrania
33
Polubienia
2
Ocena
0
P
Printablesmewrx

Kobra Go Printhead with HGX Lite extruder mount

This is a custom direct drive (DD) setup for the Anycubic Kobra Go, designed to work with the stock ABL sensor. The original hotend has been replaced with a TZ E3 2.0, and the extruder is mounted using the HGX-LITE system. This…

Pobrania
31
Polubienia
5
Ocena
5
P
Printables1katkov

Impact printhead Remix for Creality Ender 3 / NEO / PRO (not E3 V2 V3) Printhead HGX-Lite with mount for CR-touch

Описание на русском ниже: This printhead based on project of Kirill Plasma https://www.printables.com/model/922675-impact-printhead-for-ender-3-tevo-tornado-lomacho Target of project: I wanted to avoid of need very accurate print of…

Pobrania
31
Polubienia
7
Ocena
0
P
PrintablesPeter Clark

HGX Lite Extruder Cooling Fan with Optional Thermistor

Although it is just fine for the extruder motor in direct drive to run hot, it will, thats what it does. The problem is that the HGX Lite extruder (all metal) is a great heatsink for the motor, so it gets very hot too. When it is hot…

Pobrania
30
Polubienia
8
Ocena
0
P
PrintablesPláča

REMIX MAK Vector Duct - HGX Lite V6 backplate

I made a remix of MAK Vector Duct - Orbiter V2.0 V6 Volcano Creality/Ender 3 Mount to fit my budget extruder HGX Lite and I enlargered some holes for M3 heat inserts. I also used 40mm fan duct from here:…

Pobrania
30
Polubienia
7
Ocena
0
P
PrintablesThomasaurusRex

HGX Light - Ender 3 Lightweight DD Overhaul & Linear Rail

Adjusted X Carriage to work with Rapido UHF and the HGX Lite V2 Extruder mounting holes.

Pobrania
25
Polubienia
6
Ocena
0
P
PrintablesNikosCreality

Filament Runout HGX Lite

Ich habe nach einem FilamentRunoutSensor gesucht der dem Orbiter2 smart sensor ähnelt und nicht zu sehr aufbaut, da ich keinen gefunden hab, habe ich selber einen konstruiert. verwendet habe ich einen nicht mehr benötigten…

Pobrania
25
Polubienia
4
Ocena
0
P

ahgx2.0extruder-filament sensor

another hgx 2.0 extruder, now with filament runout sensor. it uses a d2f-l microswitch (i had to trim the lever, as it is longer than the switch body and a 4mm slice of a 4mm od teflon tube. a 4mm sphere works too. please remember to…

Pobrania
24
Polubienia
9
Ocena
0
P
Printableslameandboard

Anthead ProtoXtruder Stealth ProtoXruder 2.0 and ProtoXtruder 2.0 spacer for Leaf Cutter HGX Gear Extruder - sherpa mounting

this is still untested but made for Anthead and getting leaf cutter working with all sherpa mounting extruders possibly. I would like to add a filament sensor soon.

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesSergey Sergeev

FlashForge Adventurer 5M/5M PRO HGX 2.0 smooth 6701 bearing extruder arm

Now we use 6701 bearing in the extruder arm, which should reduce extrusion artifacts. Test it yourself please :P

Pobrania
24
Polubienia
5
Ocena
0
P
PrintablesRecifeStarGazer

Mantis mount adapter for HGX lite v2

Just a small remix from. The true credit is not mine. Refer to https://github.com/TheWarolf/Voron-Personal-Mods/blob/main/V2/Long_Mantis_Toolhead/LGX_Lite_Toolhead/Readme.md

Pobrania
21
Polubienia
4
Ocena
0
P
Printablesmada

Stealthburner HGX Mod w/ cutter (and mounting plate for Ender 3v2)

Made these models compatible with FilamATrix and Ender 3v2 (does limits total Y distance, nozzle is moved forward 5-10mm) - I also only have 5mm (5.5ish? will measure later) ball bearings so I downsized the hole for the filament switch.…

Pobrania
21
Polubienia
4
Ocena
0
P

Delta Flyer HGX/Sherpa/Orbiter mount

Pretty simple stuff, 2 versions, one for Sherpa/HGX-lite, one for Orbiter. The mount goes on the panel and the center top panel bolt, the screws going into the mount just thread into the plastic. Uses a PC4-10 fitting to connect the PTFE…

Pobrania
20
Polubienia
11
Ocena
5
P
PrintablesSki3d

HGX SUSburner ebb36 gen2 mount

Mount for the new ebb36 GEN2 for the susburner

Pobrania
20
Polubienia
4
Ocena
0
P
PrintablesAmbrosia

HGX 2.0 drive gear

For you to use in your open hardware extruder designs. There are two of these. There is another gear I didn't draw yet. The teeth profile (and probably count) is wrong, but the outer diameter of the teeth is correct. And the knurling is…

Pobrania
19
Polubienia
4
Ocena
0
P
PrintablesGabriel Soria

Sermoon D1 HGX lite mounting brakets

Print in any high temp filament you like, i used ASA (260c and no cooling) for the initial design prints and it's been perfect 4x M3 Heat Inserts, two for the extruder mount holes and two for the old extruder motor mount holes. Insert…

Pobrania
19
Polubienia
4
Ocena
0
P
Printablesflamo

Reinforced Ender5 Plus HGX lite Mount

This remix is for addressing the wobble and high center of gravity issues from the original design. Now this version clamps firmly to the plate and sit lower than the original design. This design needs 4 M3x5mm heat inserts.

Pobrania
18
Polubienia
3
Ocena
0
P
Printablesmalec.jirka
Pobrania
17
Polubienia
6
Ocena
0
P
PrintablesK B

HGX Lite replacement collet

Broke or lost the tiny collet that holds the PTFE tube into your HGX Lite? Fear not, this will replace it. This is modeled to be an exact size and shape replica of the original, but printed in TPU. You can reuse the existing grub screw,…

Pobrania
17
Polubienia
5
Ocena
0
P
PrintablesTuan Phan

High quality Printable Extruder using HGX GEARS.

# 🚀 Wiggle Wiggle Extruder (Updated to V1.4 - Single-Drive Masterpiece) ### 🛑 IMPORTANT CHANGE LOG added Thin profiles HGX gears model(What's different?) There is a new HGX gears profile Extruder for Hgx Lite Extruder 2.0 with better…

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesMario L

TitanHGXtruder NX

I have designed a new gearbox for the Titan Aero, the Titan Aero extruder has the same mounting as the Titan extruder. I decided to adapt my AeroHGXtruderNX design to the Titan extruder with heatsink V6. The TitanHGXtruderNX is a low-cost…

Pobrania
15
Polubienia
8
Ocena
0
P
Printablesalv

HGX Extruder smooth idler arm

Here is my variation of smooth idler for HGX extruder. Original idler arm was changed to use smaller bearing(16mm) as original gear is 18mm. BOM: 625 bearing 20mm pin(could be reused from existing arm) Print settings: Default voron print…

Pobrania
15
Polubienia
7
Ocena
0
P
Printablesmatthew yatsko

T300 adapter for HGX lite extruder and X1C hotend

My original T300 extruder broke twice so I wanted to make something that allows for easier maintenance. Currently still in a working prototype status this was printed in PLA+ at a 45° angle to increase strength of the print. I used 3mm…

Pobrania
15
Polubienia
2
Ocena
0
P
Printables8bitmcu

HGX Lite 2.0 & TZ for Prusa MK3s+

Adapt a TZ v6 Hotend , HGX Lite 2.0 extruder and S2DW accelerometer to your MK3s+ with these modified extruder bodies and this modified Delta-P fan duct V2-R2 fan mount . Assembly: Begin the installation by mounting…

Pobrania
14
Polubienia
3
Ocena
0
P
PrintablesCaps3D

VIRTU E3 - V-ION Toolhead remix (HGX Lite + CPAP)

V-ION Toolhead for a Voron 2.4 , in the Goliath configuration — the hotend this build is designed around — with an HGX Lite extruder and the CPAP part-cooling variant. Setup — Goliath hotend with 9 mm PTFE, 3010 heatsink fan, HGX Lite…

Pobrania
14
Polubienia
6
Ocena
0
P
PrintablesAXG68K

HGX Lite extruder with dual filament sensors ala LGX Lite

2026-10-13: the camlock only works well with a spring. it is not consistent without it. Perhaps a curved disk spring would be lower profile. 2026-10-10: Added a camlock file. The center cross threaded pin is steel in the picture.…

Pobrania
14
Polubienia
7
Ocena
0