Water pipe connector Joiner and Devider
Print it and add O-Rings 15,8x3,1 Print Orientation with support for enforces only.
- Pobrania
- 2572
- Polubienia
- 360
- Ocena
- 4,5
409 modeli
Print it and add O-Rings 15,8x3,1 Print Orientation with support for enforces only.
Hi, I remade this model put with a print-in place hinge. I added my fusion 360 file which is parametric - meaning if the print in place is too tight, you can make it “lose” in the model. Look at the image referring to that (file: Filament…
Hi, This is my filament splicer/joiner that I designed for the purpose of consuming entire rolls of filament and also enabling multi-color prints. I also made a spool holder to clamp to my desk. Splicer will fit desks up to 30mm and the…
By request, two hex inserts, joined as right angles so you can use it to join two panels together. If you want a larger (or indeed smaller) gap in the corner, use the OpenSCAD file and change the variable extra_separation.
I was looking at the Honeycomb Storage Wall and it looked pretty neat. And so I set in motion the plan to print some honeycomb bits to fit on my wall. So I started out paramaterizing the honeycomb to fit. And I saw someone made pretty…
A handle for a Ruger 10/22 magazine, and magazine joiners. The 10-round magazines are fiddly things to manipulate, and recess into the rifle receiver. This handle gives you something to grab onto to extract stuck magazines, and to rapidly…
This model is compatible with the lego system.
This model is compatible with the lego system.
Shelfie allows you to design your own storage and shelf systems using a fully parametric design. Simply generate the required Shelfie connectors based on your preferred storage layout using OpenSCAD. It is based on the original concept…
As the name. You need 5 JP4-01 or PC4-M10 to use this. The JP4-01 has shallow cut so it's preferred to minimize the filaments getting stuck.
0.75in. 19mm. Pipe Joiner PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
A pipe joiner that joins 0.75in.(19mm.), pipe to 0.5mm.(12.5mm.) pipe. PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
0.5in. 12.5mm. Pipe Joiner PETG recommended for outside use. Increasing wall count or infill to 100% for better strength. No supports
These are 90 degree turn with a 10 degree bank hot wheel tracks with joiners. Its input / output are level so there is no drop in this design. The tongues are designed to be push together / pull apart, which is showing to be easier than…
Soldering wire joiner holder Suits 10 - 30 AWG gauge wire If you find this part useful please would like to support me, you can buy me a coffee :) https://www.paypal.com/paypalme/ikom Let me know if you have any suggestions to improve my…
I designed these fasteners to help me connect my spare cardboard boxes and pieces together to make structures for both my kids and our bunnies! Each bracket features non-destructive teeth that help to grid the cardboard for extra grip.…
A handle for a Ruger 10/22 magazine, and magazine joiners. The 10-round magazines are fiddly things to manipulate, and recess into the rifle receiver. This handle gives you something to grab onto to extract stuck magazines, and to rapidly…
This 3D printable piece features identical geometry on both sides and is designed to be printed twice using model 'A.' Whether used as a standalone piece or incorporated into your projects, it delivers exceptionally satisfying and…
This 180 degree turn with a 45 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Its input / output are level so there is no drop in this design. Step files are…
Simplest Ever Filament Joiner Ever (Ever) NEW AND IMPROVED Update 04-11-2022: No screws and now no cable-ties required. Many thanks to jcjames_13009 for suggesting his ‘hollow squares’. These are now part of the print with grips on the…
Sunlu FC-01 Filament connector/Joiner tool. PETG
MELD: A Filament Joiner September, 2022 After working with Mosaic’s Palette 2 Pro, I wanted to find a cheaper off the shelf method for filament joining that didn’t cost $500. Sticking to Recreator3D’s mission; I started work on, MELD: A…
Easily add splines to your mitered joints such as picture frames with this jig. This project was inspired by a video by David Picciuto and I wanted to help improve upon his "least favorite method" for adding splines (…
As the name. Made for BAFS v.01, but can be used for other similar use. You need 5 PC4-M10 to use this. Inspired by other splitters: https://www.thingiverse.com/thing:2444687 https://www.thingiverse.com/thing:2867089…
Pipe fitting adapter/joiner for the drain hoses of a washing machine and condenser-dryer. As printed it fits my Bosch washer and Haier dryer perfectly. The model is parametric, so should be adjustable for other sizes. As uploaded, fits a…
These joiners let one IKEA LACK table sit on top of another securely. The cross-shaped peg makes a solid connection and ensures that the table legs won't rotate. The tables are not fastened together; you can lift the top one off at any…
This bracket relocates the filament sensor on the Anycubic Kobra S1 combo, designed specifically to address friction and positioning limitations I encountered with other solutions. Key features include: Repositions the sensor straight…
I put four of IKEA's “Billy” bookshelves in a room and found them to stand slightly unevenly, probably due to the uneven floor. Like every problem I encounter nowadays, there was a way to 3D print a solution! This little bracket did the…
Needed to join two PTFE tubes togethor using M10 Couplers Modelled M10 threads print with low layer height 0.1mm to keep threads
When in need of a Kato Unitrack Insulated Unijoiner , this 3D-printable solution is ready to click into place. Designed as an alternative to Kato’s 24-816 or 24-819 insulated rail joiners , it provides reliable electrical isolation for N…
Wanting to print at higher temperatures on my 3D printers, I had a need for this and didn't see anything readily available. Fusion 360 to the rescue!!! Due to the global supply chain making everything ridiculously expensive, I designed…
This jig is inspired by Makers_Fun_Duck's method for joining strips of PET bottle before they are put through the filament extrusion process (detailed in this video: https://www.youtube.com/watch?v=xNtrQQ42WG4&t=0s) The holes at the top…
This model is meant to be printed on it's side with build plate supports at a 0.1 or similar layer height. After printing use a small drill bit to clean the inside hole and also sand the outside surfaces to make the hose fit better. I…
This is a very simple joining piece for joining two hoses fitted with my CAMLOCK SHOPVAC CONNECTOR. Print it to match your connectors - or not! NOTE - I have not test printed this fitting, however as it is generated from my standard…
I needed some track insulators for my LGB style G-Scale layout. However, some were to be temporary, so I didn't want to modify the track segments. I created a custom Male-Female insulator (as well as a standard Female-Female). These are…
This model is compatible with the lego system.
My two Billy bookcases, annoyingly, would not stay together so I made a simple bracket to hold them to each other. The brackets stay in place through friction and the fit can be made tighter by adding folded paper behind the bracket. You…
See the details of the Y-Splitter for access to the Release Ring and Locking Clips required for both input and output. https://www.printables.com/model/563111-bambu-lab-extra-over-engineered-y-splitter
A model of an insulated rail joint for H0 scale. It wasn't modelled for a specific rail code, but I tested it on Lima and Fleischmann rails. I printed it in PETG with a 0.4mm nozzle at a layer height of 0.2mm, lying flat on the build…
So i broke my blind chain connector, or maybe it was my kids, likely them. Anyways, it snaps together, easy to print, and if it pops apart, glue it shut with crazy glue. Screw spending $25 on amazon for 5…. like jeese.
This is a ptfe y-joiner 2 in 1 for Pc4 M10 fittings. I print it as you can see in the pictures to avoid that the filament get stuck at the layers. I also avoid support inside the part. Feel free to remix with attached .stp -file.…
This two piece item joins the two ends of a cord - simply tuck the two ends of the cord into the inner piece and click it into place within the outer hood - now you have a handy thumb tab - great for zips on outdoor gear where you need…
A simple joiner that allows you to connect two ends of a length of 6mm wide GT2 timing belt. The joiner is shaped so it does not interfere with the teeth of the belt. Print with largest surface down. Slip the ends of the timing belt into…
Joiner for assembling and disassembling Saw Horse Legs. Printed with PETG. Requires 0.25 x 5.5 inch, lag bolt to secure tension grip. Please Rate and share your Make 😎
Tiny PTFE tubes joiner for x2 M6 tube connectors. Use 0.1-0.12mm layer height.
Because of space constraints I had to stack the hsw wall segments the way they're not supposed to be (the wall segments are longer on one side, and should be placed the longer side going up, I had the longer side going sideway) and the…
This is a simple bracket to join together IKEA Lack tables. It is printable with no supports and 0.3mm layer height with 20% infill is fine. Included 2 x countersunk holes to enable screwing to the legs of the upper table in the stack…
Printed in two halves, because of the large size. No support needed. Connected by 2.5x8mm cylindrical pins and/or glue. There is a small gap when the box is closed. To make sure no parts escape from the organizer when the box gets tilted,…
Unprofessionally “Fused” the Joiner and Anchor, added some internal fill to make it more solid because it kept breaking. I personally printed it at 75% because I did not want it to break again. You can try it out with whatever infill you…
These are 45 degree turn with a 5 degree bank hot wheel tracks with joiners. Its input / output are level so there is no drop in this design. The tongues are designed to be push together / pull apart, which is showing to be easier than…
I designed this to stack my Prusa Lack Enclosure v2 ( https://blog.prusaprinters.org/mmu2s-printer-enclosure/ ) on a third Lack table. It uses these screws ( https://www.amazon.com/gp/product/B07M5SRLTF ) I originally purchased them for…
The Sunlu Filament FC01 joiner, is an excellent product, but doesn't suport curled or spring like filament that will not stay flat. So this jig, helps to align and keep the filament straight, so that a perfect join can be obtained every…
Update 03.07.25: Removed a little Design error. Thanks to @NickBerczyns_2829932 A small modification of the great model from D3D-Concept. I kept having problems removing the newly welded, still hot and soft filaments cleanly from the…
This is an adapter to connect the Magnetic PTFE Joiners by Line Arc Line to an EIBOS 3D Series X: Easdry filament dryer. It supports the “No Offset” type of PTFE joiner. It uses screws instead of additional magnets for the magnetic…
Bow or butterfly joinery model. aka bow tie, dovetail key, Dutchman joint, or Nakashima joint, is a type of joint or inlay used to hold two or more pieces together. Depending on the size, you may have to scale the bow up or down. I've…
Mysterious Japan Joinery, it's hundreds of years old, yet it is sole example of that specific joinery. It was found at Osaka Castle, which is over 400 years old. However, it was unique and how it was cut and assembled was a total mystery…
I ran out of fan screws and noticed that the PLA+ filament that I used far strong enough that screws aren't needed. I made a project using 8 fans. after quickly running out of screws I made these screwless connectors. They are a very…
Join your last lines of filament together, don’t waste them. This tool allows you to use a soldering iron or fine pointed heat gun or even a lighter to fuse lefter over filaments together. Simply use some ptfe or silicone tube to make a…
This 180 degree turn with a 30 degree bank hot wheel track with joiner has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Its input / output are level so there is no drop in this design. Step and Fusion…
If you have a resin printer and need a good exhausted enclosure for it, you may want to build a Lack enclosure. You'll need more height so 2 Lacks together, joined at the feet so your exhaust fan can be mounted at the top. This part…
My two Kallax units, annoyingly, would not stay together so I made a simple bracket to hold them to each other. The brackets stay in place through friction and the fit can be made tighter by adding folded paper behind the bracket. You…
Compare to Closet Maid Joiner Plates. I could no longer obtain the original designed plates from Closet Maid so I created a similar plate that is stronger with the original dimension for exact replacement. Please Like and Post your Makes.…
A bracket used to connect 2 120mm and a 92mm fan together. Used for deshrouding GPUs.
Remix of Lopata's model to accomodate 4mm PTFE and stiffer more rugged 8mm Spring Also added some tether holes
Edit. 20250307 Added base form 1x1 to 4x4 and joiner. (original files replaced).
There are lots of ways to connect two IKEA LACK tables on here, but I wanted to try something a bit more minimalist and simple. It's designed to keep the tables together neatly and safely, but not to increase the height or weight bearing…
This is something I put together to let the community make. It's an all machinable aluminum XY Joiner. The design is free for anyone to make and distribute if they so desire. I have only printed this to test its fitment.
As the name. You need 5 JP4-01 / PC4-M10 to use this.
PLEASE NOTE: My railroad uses battery operated locomotives so I have no need for electrical connection from rail to rail. If you have one of the more typical rail powered systems this model will not work for you without installing jumper…
This model is compatible with the lego system.
I was tired of using double-sided tape to fasten my tubing to the back of my enclosure. I wanted something that was solidly attached, but could still be changed at a moment's notice. My solution was to use DIN rail to make a modular…
Great original mode, but for everyone not living in America, we cant access imperial screws. This was designed to use a 3D printed thread section, which can be glued or left as is so the screw can be assembled and disassembled. The…
Needed parts: Arduino2560+ramps+reprap smart controller+power supply 12v+2xnema17 with min.a4988 -2x radiator from ender3 -2xheatbreak all-metal(drilled with 2.6mm drill bit for around 10mm) -2xextruder mechanism from ender3 -1xheatblock…
This is a flat snap-fit connector for 2040 V-slot aluminum extrusion profiles , designed to join two profiles side by side (or four 2020 profiles in a 2×2 layout) in a single plane. It connects the extrusions securely without screws or…
This model is compatible with the lego system.
A guide for manually joining sections of filament with a soldering iron. The filament is fixed in the channels with screws and channel caps. M2.5 screws (2.5 mm diameter). Nuts with a maximum outside diameter of 5.6 mm. After placing the…
I have created RatRig v-core 3.1 extrusionless x-gantry - XY joiner inserts inproved - for more stable connection. Tested, works well. Also You can find spacers. Not tested…I have used some calibrated 10mm spacers with threds from Ali.…
As I liked the Clamping mod of the gold series (2 M5x20 bolts to hold the 2020 extrusion to the part AND metal botom plate) and I also liked Adam's (V3D) mod to remove the aluminium spacers and just mount the idlers, I combined both.…
Filament Joiner For filament with a diameter of 1.75mm. It also works wih homemade pultrusion filament. Build Instructions What you need 6x M3 Heat Inserts 4x M3x14 Screws (longer screws will work as well) 2x M3x6 Screws (Also here,…
Ikea Lack Tischverbinder, zum verbinden zweier Ikea Lack Tische. Ikea lack table connector, for connecting two Ikea lack tables. Print Settings Printer Brand: Anycubic Printer: All-metal Mega Rafts: Doesn't Matter Supports: Yes…
Attachment for the biscuit joiner to have more support surface when routing into the surface of the workpiece. The router tilts slightly here, as a lot of weight presses down. The fence allows the router to be guided more safely and…
This is a remix of my BMG clone adapter. https://www.printables.com/model/198386-bmg-clone-adapter a PTFE tube joiner using the cr-10 PTFE Tube connector. you should be able to join two regular PTFE/Capricorn or a mix of those tubes.…
Similar to previous model, but with curves instead. Tested with BAFS v.01 and cheap no brand (white, green and bright orange) PLA and Sunlu PLA+ which has been exposed to open air for about 1 month (pink and black). See the pictures on…
I needed the model for an aesthetic connection of Nocua fans, for my graphics card Noctua mod. It works perfectly, I reccomend printing in PETG or PCTG, PLA would be to brittle, I didn't try it though. 30% infill is more than enough, it…
Accessory for my Modular Racking System There is a short and a long set. They join the beams at a 45 degree angle. I chose 45 over 90 due to the length of the outside beam with a straight 90 (It does unfortunately mean needing an extra…
This model is compatible with the lego system.
A simple Gridfinity box to keep the Filament Joiner device from Sunlu together with its power cord and the PTFE sleeves nice and tight when not in use. I added two heights: 4U and 6U. The photo is from my 4U printed box; the sleeves just…
This 180 degree turn with a 45 degree bank and 40mm drop hot wheel track with joiners has the ability to be mounted via a m5 x 6.7mm heat set brass insert from McMaster. Step files are included if you want to modify the design. (Update:…
A cut for printing parts larger then the bed. Inspired from a pictured from @Matt Dongworth on FB. Print instructions this is a draft print for a larger than the bed assembly joint (to be published later) Printed on MK2.5S PLA 0.2 layer…
Updated the washer for connecting the handle to the magazine to make it as low profile as possible.
The default plinth joiner piece for the IKEA METOD system was tiny and easily knocked off while vacuuming and eventually lost and does not cover gaps. Designed a new piece using the joiner nubs for the original plinth end cap pieces and…
Used to connect cabinetry panels together. I have also included my FreeCAD file to make it easier to modify.
This model is compatible with the lego system.