Wyniki wyszukiwania: plunger

Sortowanie

383 modeli

P
Printablesltlowe

Tray for Flange Toilet Plunger

This is a tray for a 6" flange style toilet plunger with 3" to 4" flange. The main part of the plunger sits on the fins with the flange held slightly off the bottom. I printed mine in PETG with a 0.6m nozzle at 0.3mm layer height with 10%…

Wydruk około 9,63 €–11,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
217
Polubienia
28
Ocena
5
P
PrintablesSillybutts

Printed Plunger Tubes for 1.5"OD PT blasters

A set of fully printable plunger tubes! These plunger tubes are a fully printed design that fits in standard TCs, Caliburns, Lynxes, etc, without modification to the blaster ! So far, there are plunger tubes in these sizes: 1.5" OD…

Pobrania
559
Polubienia
128
Ocena
5
P
PrintablesJwidess

X-Shot Longshot - Plunger Tube Replacement

Simple 3D printable tube to replace a cracked plunger tube on an X-Shot Longshot. I recommend printing this with Orca slicer and scarf seams enabled to get the best inside surface finish. Attached .stl file and a .3mf file for use in Orca…

Pobrania
456
Polubienia
58
Ocena
4,86
P
PrintablesKophi

13mm Flux syringe plunger

Syringe plunger with 13mm end for use in 10cc Amtech flux tubes. I was fed up with trying to use a pen or my finger to push out flux, so I designed this! I recommend orienting the large end of the plunger to sit on the print bed so there…

Pobrania
448
Polubienia
39
Ocena
5
P
PrintablesRobert Gogete

Automatic syringe plunger for MG90S servo

Description Syringe plunger that can be automated using a microcontroller and a servo. The plunger is designed to fit a 100 ml syringe. Travel distance of the plunger could be increased in another version. Printing Can be printed with…

Pobrania
420
Polubienia
160
Ocena
0
P
PrintablesPiotrK

Plunger with cup opener ( UPDATE 1 ) for soldering paste syringe for KOKI 40g/10ml and some other paste or flux syringes

This plunger / piston was created primarily for soldering paste from KOKI provided in syringe (40g / 10ml). It fits as well some other syringes with paste or flux, like in my case: Amtech Flux 10cc. Working length is 80mm (diameter…

Pobrania
354
Polubienia
40
Ocena
5
P

(The Plunger) 22. Pellet

Here is 22. cal pellet I designed for my Pellet gun, Warning! very loud and fast moving, Print on Face

Pobrania
339
Polubienia
34
Ocena
4
P
Printablesmarsupilami9

Dummy 13 plunger

A plunger for Dummy 13, to unclog the shit he causes

Pobrania
323
Polubienia
79
Ocena
5
P
PrintablesAndrew Leigh

Epoxy Plunger 10:1

Plunger for the RS Pro epoxy gun, to work with 3M scotch-weld 2-part glues like DP8005. I printed this standing up in Sunlu White PLA+ with a 10mm brim and supports for additional stability. I've included the bgcode for a Mk4.

Pobrania
318
Polubienia
21
Ocena
5
P
Printablestonycwang

Frankford Arsenal X-10 Case Plunger

This case plunger design will allow the plunger to retract into the case column with a case in the plunge and not damage the case. NOTE: Currently only available for 9mm. However, I plan on offering plungers for other calibers as requests…

Pobrania
315
Polubienia
5
Ocena
0
P
PrintablesTuca D

Epoxy gun Plunger

Plunger for the RS Pro epoxy gun, to work with 3M epoxies like DP2216. Can be printed standing up without supports!

Pobrania
276
Polubienia
31
Ocena
0
P
PrintablesTanprints

Dwayne The Plunger Rocktopus

This is one of the funniest 3d prints I have ever done. 3d Print should be easy. Might have to use supports

Pobrania
256
Polubienia
40
Ocena
0
P
Printablesfaultedlogic

Flux Syringe Tip & Plunger

This package contains an applicator tip and plunger for the cheap Chinese made Amtech 10cc syringes, which are sold in bulk and come with neither. I'd been hot gluing plunger base from an old Global 10ml syringe with the rubber end…

Pobrania
241
Polubienia
14
Ocena
4,5
P
PrintablesMisplacedMoose

Zinc 2.0 improved plunger

Use the high power plunger for normal length K25 springs. The low power plunger should be used for the 788 spring, or 20 coils of K25 for a big power boost.

Pobrania
238
Polubienia
23
Ocena
5
P
Printablestubeless2276

Datsun 620 Door Lock Pull / Plunger

Update May 10 2022: So it's been a year or so now since I made these. And I have to say, clearly no one printed it. I was reprinting in .10 layer height as well as printing thread into the pull instead of tapping it, just to refresh the…

Pobrania
238
Polubienia
19
Ocena
5
P
Printablesictapa

Key for beiter plunger

This is a key for tightening the beiter plunger on your riser. Sometimes the space between the nut and the spring case isn't enough to fit the original key, so I decided to make my own! Cool adition to the original key it has a hole so…

Pobrania
230
Polubienia
19
Ocena
5
P
Printablesbykim

Flair 58 Plunger Piston Alignment Tool

Created a simple tool to help realign the piston on a Flair 58 manual lever espresso machine. I tested it on my Flair58 while fully heated and the tool seems to hold up fine printed with PETG, but use at your own discretion. Also works…

Pobrania
227
Polubienia
12
Ocena
3
P
PrintablesDanilo

Plunger Flex TPU printable - sopapa destapa tubería

Este Plunger de 12 cm / 5 pulgadas, fue diseñado para ser utilizado en caso de emergencia o imposibilidad de salir a comprar uno a la ferretería. este dispositivo sirve para desobstruir inodoros o tuberías. Se puede usar con la mano o se…

Pobrania
217
Polubienia
18
Ocena
5
P
Printablesliquidmetal9015

Miniatures Painting Handle w/ Bearings & Ball Plunger

A painting handle with a rotating platform that spins on bearings and is restricted by a ball plunger. The rotating platform is assembled with two bearings and a long M4 screw. I used an M6 ball plunger although it can be used without…

Pobrania
217
Polubienia
58
Ocena
4,5
P
PrintablesRizato

Dynamite and Detonator Dice Tower With Functional Plunger

Update May 3rd: Improved Freewheel and Pawls leading to better plunger action & longer coasting. Update May 2nd: Added new STL for Detonator box without text (Not pictured) Amp up your tabletop gameplay with this themed interactive dice…

Pobrania
188
Polubienia
147
Ocena
0
P
PrintablesTitanOX

better Ryobi Caulking Gun Plunger

The stock plunger did not press evenly on the cartridge plunger leading to enormous leakage at the back of the cartridge. I almost exclusively use the polymere cartridges from Würth (German professional hardware store) I used a metal…

Pobrania
180
Polubienia
22
Ocena
0
P
Printablescaptaincorey

Toilet Plunger Holder Base and Lid

A toilet plunger holder!! The g-code for the plunger holder base and lid both have Octogram Spiral selected for top and bottom layers which leaves a nice little design on those layers as an option to just smooth. Also, the base holder has…

Pobrania
171
Polubienia
23
Ocena
0
P
PrintablesMre

5ml syringe - vase mode w/ TPU plunger

This is a fully functional 5ml syringe with tpu plunger. shells printed in vase mode for speed and plunger only 7 mins. 0 leaks and 100% holds liquids without droplets, pretty amazing… enjoy

Pobrania
166
Polubienia
30
Ocena
4
P
PrintablesLee Thomas

Plunger tube for Ontos

Referenced SillyButts Plunger tube design to create a variant for the Ontos. 150mm long and OD of 35mm ID (with the plastic insert) is 32mm. Works great! I have tested it and barely noticed a drop in FPS compared to the aluminum tube. I…

Pobrania
149
Polubienia
52
Ocena
5
P
PrintablesVasilii

Sink/Drain Plunger

A plumbing plunger in three sizes with a compact screw-in handle. Useful for cleaning blockages and clogs in all sorts of sinks and drains. Approximate base diameter: S - 100mm M - 125mm L - 150mm Every part is optimized to be easily…

Pobrania
149
Polubienia
69
Ocena
5
P
PrintablesOMNI Arcade

30mm Sanwa Concave Plunger

Fits 30mm Sanwa buttons without any modification to the button

Pobrania
143
Polubienia
24
Ocena
0
P

DZP MK2 Plunger Tube Reinforcement

The DZP MK2 foam dart blaster has a design problem the screw posts that connect the plunger tube to the slide grip are not supported by any webbing, over time they can crack or show signs of plastic stress. This part is meant to provide…

Pobrania
142
Polubienia
25
Ocena
0
P
Printablesewr2san

Pinball Plunger (for a virtual pinball machine)

Parts to make a pinball plunger for a virtual Pinball. Video of it: It makes a satisfying clank when assembled and installed. Requires the purchase of 2-3 springs, a switch, and a 1/2inch rod. In my build I used Qty 2 of 3" length springs…

Pobrania
137
Polubienia
24
Ocena
0
P
Printablesquadrupedal

Commodore 128 Keyboard Plungers

Blue and black keyboard plungers for the Commodore 128. Blue is used for the function keys, black is used for the main keyboard. These are really only suitable for resin printing. Might work or be able to be adapted for other Mitsumi…

Pobrania
137
Polubienia
6
Ocena
5
P
PrintablesJamie

Solder/Flux Plunger

A plunger to get the flux or solder paste out of the syringe. Handy if your other one broke, or if you can't find it anymore :). Print Settings Infill: 25-100% (Depending on the nozzle and viscosity of the flux or solder paste) Brim: only…

Pobrania
133
Polubienia
23
Ocena
5
P
PrintablesASH

Ontos remix for 35-38mm plunger tube

Follow the print instructions and orientation for Ontos. Except for the back, center, ram and plunger head, everything else is the same as Ontos. Two obvious hardware changes: Plunger tube is 15cm 35 ID 38OD tube Use 30-35 orings or 123…

Pobrania
129
Polubienia
20
Ocena
5
P
PrintablesCosyMaker79

Tube with plunger for Heart-shaped Play-Doh

Tube with plunger for Star/Heart-shaped Play-Doh Tube where you can insert the children's play-doh and using the plunger, push it and create a large Heart-shaped spaghetti ------- Tubetto con stantuffo per pongo a forma di Stella/Cuore…

Pobrania
122
Polubienia
27
Ocena
5
P
PrintablesBDubil

Mini Plunger Fridge Magnets

2 piece model for easy printing. pieces fit snug, some de burring may be required. Designed for a 8mm x 2mm magnet. .2 layer height, no supports, infill 20% Assembled it measures about: 24mm wide at the base. 48.5mm tall with magnet…

Pobrania
121
Polubienia
37
Ocena
5
P
Printablesprecisionbee

Sink Mini Plunger

Sink Mini Plunger, a handle to print w/ rigid material (PLA, etc) and two different cups (square, round) to print w/ TPU. I've printed both styles of cup, used several times, works well. Biggest variable is the size/shape of the sink…

Pobrania
120
Polubienia
35
Ocena
0
P
PrintablesBlaster Boss

Zinc 2.0 Alternate Catch and Plunger Rod

This alternate catch and plunger rod system allows you to not need the metal plunger core that is standard with the zinc. I did this so I could more easily source my own zinc hardware as that plunger core is some non standard piece of…

Pobrania
120
Polubienia
30
Ocena
3
P
PrintablesSillybutts

Speed Seal Caliburn & Talon Claw Plungers

Test video: https://youtu.be/dxtW75af_pY WARNING, RESULTS ARE WILDLY VARYING BETWEEN TESTERS. THERE IS NO GUARENTEE OF AN IMPROVEMENT FOR YOUR SPECIFIC BLASTER. Caliburn and TC plungers that have a sloped o-ring channel, similar to a CEDA…

Pobrania
120
Polubienia
30
Ocena
5
P
PrintablesEncryptal

Gel Blaster Plungers & Spring Holder

These are the plungers and spring holders used for cheap Gel Blaster gear boxes on amazon and other sites. I remodelled them with exact dimensions and tested them to ensure they work. These do not come with the rubber bits. Use a…

Pobrania
117
Polubienia
24
Ocena
0
P
PrintablesChris West

Gridfinity Magnet Baseplate Jig (with plunger) [Remix]

A jig for gluing magnets to #gridfinity weighted baseplates. This is roughly the opposite of the Magnet Glue-Up Jig that assists in attaching magnets to Gridfinity storage blocks. Uses the standard 6x2mm magnets. Remix of kmeisthax's…

Pobrania
115
Polubienia
18
Ocena
5
P
Printablesjon

Kwikpen 5th dose plunger, easy mode without break in half the pen

With this model you can use the last dose (5th) of kwikpen of most brands. It's intended to use without break the pen in half, because this is difficult to do, only you need to remove the dial and insert the plunger. Due abuse in the past…

Pobrania
111
Polubienia
14
Ocena
5
P
PrintablesLimpdisket

Mini Circle Cakepop cutter, plunger, and holder

1 in mini cake pop cutter and popper Matching tray to hold cake pop disks for keeping shape while inserting cake pop sticks.

Pobrania
111
Polubienia
3
Ocena
0
P
Printablesthall72

Lego Compatible (11251.dat) Minifig Plunger

This model is compatible with the lego system.

Pobrania
111
Polubienia
30
Ocena
0
P
Printablesswe_expat

Beiter plunger and clicker key

Multi-devices beiter key : This tool was designed as a replacement for the key supplied with the beiter plunger. With it, you can tighten the beiter's plunger shoe, but also the nut, and, that's new, the beiter clicker. Easy to print No…

Pobrania
110
Polubienia
4
Ocena
5
P
PrintablesGnomeworks

MTAOB: Plunger

Made a 3 color model to replace the cardboard tokens in Mr. Torgue's Arena of Badassery. They can be used with the corresponding numbers underneath for the various scenarios utilizing them.

Pobrania
105
Polubienia
17
Ocena
5
P
PrintablesJulius3E8

Musical Whistle for Resin Printer (cylindrical plunger)

This is a slider style whistle which uses a pill-shaped plunger/slider to change the tune as you blow into it. Here's a vid to see what it sounds like (with the older style plunger slider): Here's the one I originally designed for an ABS…

Pobrania
103
Polubienia
9
Ocena
4

Silicone gun Plunger

Silicon gun Plunger replacement, with 8mm diameter that can be change with fusion configuration table.

Pobrania
102
Polubienia
17
Ocena
0

Sillybutts Chimera Plunger Head

This is the Chimera Plunger Head for the latest Sillybutts blaster designs. It is compatible with the Alchemist , the Wildstyle , the Foxbat and the Battle Axe . It uses the same hardware as the plunger head of the above mentioned designs…

Pobrania
101
Polubienia
30
Ocena
5
P
PrintablesFreddyZ

Gecko rectangular plunger

redesign of plunger and plunger rod in a style more akin to Sillybutts designs (rectangular instead of round); therefore much stronger and easier to print. Modified catch assembly to accept rectangular plunger rod. Plunger tube changed to…

Pobrania
101
Polubienia
29
Ocena
0
P
PrintablesSSmithy

3D printed plunger tube for Finisher 3.X Nerf blaster

Hey guys, I'm trying to eliminate as many non-printable parts from my designs as possible. On my journey to conquer this noble quest I tried a few approaches to get rid of the PVC tube, only to find out that Sillybutts had already solved…

Pobrania
100
Polubienia
42
Ocena
0
P
Printablescharliedrums

Cherry MX SwitchPlunger & Spacer for Seimitsu 30mm PS-14-KN Button

Edit 3/26/2021 Added a v2 plunger. Made it a little bit taller to it doesn't rattle as much and modified the geometry of the stem. Left both versions so you can print out both and decide for yourself which one fits your needs. If printing…

Pobrania
100
Polubienia
9
Ocena
0
P
Printablesalexan_e

Solder paste plunger

This is a plunger intended for solder paste tubes like the one shown below that are normally sold without it. The plunger is printed in one part and you break the support structure of the moving part once it is printed using a small…

Pobrania
97
Polubienia
8
Ocena
5
P
Printablesericsnis

Arcade Button Plungers

This is a set of replacement plungers for Baolian 30mm arcade buttons sold at Microcenter. The labels are embossed so they can be filled in with model paint. Acrylic also works well and is easier to clean mistakes, but is less durable. I…

Pobrania
96
Polubienia
14
Ocena
0
P
Printablesjwingenroth

Loctite SEMPAK cartridge plunger for 3M DMA 50 dispenser

This is a plunger for the 3M DMA 50 dispenser. This dispenser is made for the 3M 2 part adhesive Duo-Pak cartridge. With this plunger, the 3M dispenser can dispense Loctite 50mL (50g:9g) SEMPAK cartridges. I printed in PETG, 0.4mm nozzle,…

Pobrania
95
Polubienia
3
Ocena
0
P
Printablesalexandruionica

10CC Flux syringe plunger

Print in PETG or PLA (better in petg) Infill 45% Layer 0.2mm

Pobrania
92
Polubienia
12
Ocena
5
P
PrintablesOMNI Arcade

24mm Sanwa Concave Plunger

Fits 24mm Sanwa buttons without any modification to the button

Pobrania
90
Polubienia
17
Ocena
0
P
Printableskimchiluv2pew

4mm screw for Slynx Plunger In replacement of 8/32 threaded rod

Chamfer added to the plunger for better seal ID of the plunger and plunger spacer adjusted to 4mm. Front Catch shorten to accomodate new spring guide in plunger spacer.

Pobrania
90
Polubienia
9
Ocena
0
P
PrintablesCrunch 3D

Mini Plunger Stash Container

Tired of the same old stash containers? Take the plunge and give this mini plunger a whirl! I know, I know... it's a little goofy and it won't actually unclog anything. But I had fun making it and I hope you have fun with it too. This…

Pobrania
90
Polubienia
21
Ocena
0
P
PrintablesGemeneye

Spring/Plunger Internals for the Nerf Rayven

Hello everyone! This is a Nerf Rayven that I converted from a flywheeler into a plunger tube and spring powered blaster. Back in 2011 when I saw a very grainy leaked picture of the Rayven on NerfModsandReviews, I got so excited by the…

Pobrania
88
Polubienia
69
Ocena
0
P
PrintablesJeepingJohnny

Plunger Storage Tray! For a less gross floor!

Dont put your plunger on the floor thats gross, use this tray its less gross. Just resize for your plunger if needed. This fits a plunger 152mm so resize as needed I will include the Gcode, Stl, Blender files. You should be able to resize…

Pobrania
88
Polubienia
15
Ocena
0
P
PrintablesJonBoyJones

Plunger Head / Cap for Grease Tube - To use with Socket Extension bar 3/8 or 1/2

I needed a way to squeeze grease out of the tube to fill my mini grease gun. This made it simple. Designed to use Socket Extension bar. The bar holds the plunger straight and gives you good leverage to ease grease out. The Head is just…

Pobrania
86
Polubienia
7
Ocena
0
P
Printablestmorris9

Manual Plunger for 30ml cartridges commonly used for phone repair

These syringes full of UV glues have no manual way to dispense the material inside. Instead they want you to buy a gun that costs more than the glue ($15 to $40). That's fine if you are using it to often like to make a living. So I…

Pobrania
85
Polubienia
12
Ocena
4,5
P

Plunger with handle

I have scaled this plunger down to 10cm (most Australian toilets bowls are smaller than U.S ones) and added a handle with a cap to either hang it up or just hide the screw hole. If you want a really long handle you can print 2 handles and…

Pobrania
84
Polubienia
6
Ocena
0
P
PrintablesJohn

Window Screen Plunger Pin

Broke the little plastic holder pins for our window screens, so needed some replacements and the options on the internet didn't look quite right. These are the plastic pins that you push in to keep your window screen in place. The model…

Pobrania
83
Polubienia
6
Ocena
0
P
PrintablesTino Sanchis

Print-In-Place Flux/Solder Syringe Plunger

This Print-In-Place plunger is designed for conventional flux and solder paste syringes, and it has a plug to seal off the syring and avoid having the plunger fall out of the syringe when put down on the table. I designed the plunger to…

Pobrania
83
Polubienia
20
Ocena
5
P
PrintablesGW Designs

Mini Plunger

This is a mini plunger. You can just have it sit at your desk or you could glue it to your ceiling. I don't know why you would do that though. Thank you for reading!

Pobrania
82
Polubienia
9
Ocena
0
P
PrintablesPotatoJuice

Nerf Jolt plunger Repair/Upgrade kit

Dog chewed your Jolts handle?Just looking for a new upgrade perhaps? Not a problem! This is a redesigned plunger assembely for the nerf Jolt, serving as a stock replacement aiming to meet and exceed original performance while making…

Pobrania
82
Polubienia
13
Ocena
0
P
Printablesmr3yna

Xshot Hawkeye Plunger Deadspace cap

This file is for the Xshot Hawkeye blaster. The file is to fill in the deadspace of the Xshot Hawkeye plunger.

Pobrania
79
Polubienia
13
Ocena
0
P
PrintablesMisplacedMoose

Zinc 2.0 TPU plunger face replacement

Updated plunger head with a replaceable TPU face. This is probably only necessary for pre-compressed spring loads The low power plunger can accept up to 20 coils of K25 spring The long plunger can accept an entire K25 spring and is…

Pobrania
77
Polubienia
18
Ocena
0
P
PrintablesSillybutts

Length Gauges for 1.5"OD Nerf Hobby Plunger Tubes

A collection of 3d printed length gauges for common hobby plunger tubes, to help with cutting them to size or figuring out which ones you have on hand. Each gauge has two sizes on it. SLAB/Skewer, Talon Claw/Caliburn, and Lynx/Minx. The…

Pobrania
77
Polubienia
28
Ocena
0
P
PrintablesBudgy Nebula

Onigiri Mold & Plunger

I made this a few months back but just now uploading it. IIRC I had scaled the plunger to 98%, but please let me know if this doesn't work! Note: Only use food-safe printing material or do what I do and cover the parts in plastic wrap…

Pobrania
76
Polubienia
9
Ocena
0

Improved Caliburn Plunger

Improved Caliburn plunger. Smaller diameter spring hole. Now 24mm instead of ≈ 28mm. This adds rigidity to where the spring sits when primed. NOT compatible with k14. Just get a machined plunger. No hexagon pattern. I know we all love…

Pobrania
74
Polubienia
8
Ocena
0
P
PrintablesBeaconman

Plunger for 30cc syringe using #018 O-ring

I bought syringes of Digikey, not realizing they did not come with plungers 2045-JG30A-BLL-ND. these are 30cc syringes with an ID of ~22.3mm. The piston uses a #018 oring to seal and this works beautifully.

Pobrania
73
Polubienia
8
Ocena
0
P
PrintablesDash

Dual plunger dial gauge - gridfinity

Hold two plunger dial gauges in one container. Modeled with one harbor freight and one Taylor tools gauge with some added space. Should fit most gauges.

Pobrania
72
Polubienia
7
Ocena
5
P
PrintablesRain And Storm

Syringe Plunger Gasket Seal

Replacement gasket for 3-part syringes by (West System 807). Epoxy and paint sticks to rubber gaskets that come with reusable syringes, rendering them… well, not reusable at all. Printing Has to be printed out of TPU or some other…

Pobrania
72
Polubienia
7
Ocena
0
P
PrintablesBuffdaddyNerf

Nerf Rebel Ops Doom Cannon Plunger Tube Filler

There's a huge gap at the front of the plunger tube, meant to help reduce sound when firing. However, that dead space will reduce performance for hobbyists that replace the main spring, etc. This is intended to fill in the gap without…

Pobrania
71
Polubienia
21
Ocena
5
P
Printablesosunick

LG AGM73610701 Washing Machine Magnetic Door Plunger

The tab on mine broke after 8 years, so I designed a replacement that takes the magnet from the original plunger. (I removed the magnet by using a 3 pound sledge and eye protection). Pause the print right before the printer closes the…

Pobrania
71
Polubienia
5
Ocena
5

Remington 597 extractor plunger

I suggest 0.05 ultra fine print lying on its side with full supports Very minimal cleanup required to make it fit my 597 For the plunger, I am measuring .120 diameter for the wide part, and for the tiny stem on the bottom that rests…

Pobrania
71
Polubienia
2
Ocena
0
P
PrintablesSimb

Anemone Plunger Head for -123 o-rings

plunger head for use with standard dash123 o rings used for several 1.5OD plunger tube blasters Gets a complete air seal on my blaster when plugging the breach.

Pobrania
69
Polubienia
13
Ocena
5
P
PrintablesZan Hecht

Regalo safety gate latch plunger

Replacement latch plunger for the Regalo and Carlson safety gates. This replaces the gray plunger that often breaks off at the nub that sticks up from the back. Designed for the Regalo 1161 Extra Wide Safety Gate, but likely fits other…

Pobrania
69
Polubienia
4
Ocena
5
P
Printables3DCraft
Pobrania
69
Polubienia
14
Ocena
0
P
PrintablesCybercat

Pömple für PETG Flasche / A plunger with a water bottle

Ein Pömple mit einer Wasserflasche / A plunger with a water bottle

Pobrania
69
Polubienia
13
Ocena
0
P
PrintablesVanessaE

C128 keyboard plungers

I needed a bunch of keyboard plungers to fix up an old “flat” Commodore 128, so I went looking for something suitable. Turns out there are at least TWO variations of the “flat” C128 keyboard assembly. While searching, I found these two…

Pobrania
68
Polubienia
2
Ocena
5
P
PrintablesSillybutts

4.6mm tall spacer ring for 1.5" OD plunger tubes

Use this spacer to prevent plunger tubes from wiggling back and forth. Works on Breacher's magazine tube and others too. The spacer is 4.6mm tall. Scale the vertical direction in your slicer to make this fit your exact needs if necessary.…

Pobrania
68
Polubienia
12
Ocena
5
P
Printablesspaceffox

Sillybutts larger plunger head

my o-ring had a bad seal so I slightly increased the o-ring stretch

Pobrania
67
Polubienia
14
Ocena
5
P
PrintablesKatona Dávid

DM WC GEL STEMPEL plunger V2 (andV3)

This is model for the "DM WC GEL STEMPEL" gel cartridge. The plunger part of it anyways. I bought the thing by accident, i usualy buy the DUCK branded one, saw the refill cartridges, and just bought them, not realising that they are not…

Pobrania
67
Polubienia
3
Ocena
5
P
PrintablesThinAir3D

Stomp Rocket (Flexible Plunger)

This model is printed in 4 pieces and the Plunger is designed to work with flexible filaments. There are 4 files to print: the Plunger, Base, and Nozzle, and Rocket. The Plunger HAS to be printed in flexible filament (I used Flexible PLA…

Pobrania
67
Polubienia
6
Ocena
0
P
Printablesharking

Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever

Evinrude Johnson 0322405 Electric Choke - CLEVIS, Plunger to lever Purchase at https://www.ebay.com/itm/133667880716

Pobrania
66
Polubienia
4
Ocena
0
P
PrintablesHarold Sullivan

Intex Plunger Valve to 1.5" PVC pipe

I needed to attach my plunger valve from the tank/pool outlet (lower fitting) to a heater for a DIY stock tank hot tub project. The heater used is supplied with fittings for connecting to rigid 1.5" PVC pipe, but my Intex-supplied "A"…

Pobrania
65
Polubienia
6
Ocena
0
P
PrintablesYexo

Solder Paste syringe plunger

yeah so is just a basic syringe plunger

Pobrania
64
Polubienia
5
Ocena
4
P
Printableseried

Water Cooler/Dispenser internal plunger/lever replacement

Replacement for the internal mechanism that acts as a valve for cheap water dispensers. Print instructions Because this piece has to be very strong I made a split version that is much stronger in the direction the action happens when…

Pobrania
64
Polubienia
10
Ocena
0
P
PrintablesGraemeH

Bathroom Toilet Plunger Stand

Toilet plungers have an extra flange that fits in the opening of the drain. Remixed the original to accommodate that flange. Also increased the height so it covers the bottom 25mm of the plunger. Inner wall is 145mm (~>5 ¾") and inner…

Pobrania
63
Polubienia
8
Ocena
0
P
PrintablesZafC

BK1S prototype speedseal plunger head

Speedseal plunger head I scrapped together while waiting for a better replacement and haven't worked out a secure mounting method for. Speedseals allow the plunger to move without a seal during priming (which is important for allowing the…

Pobrania
63
Polubienia
9
Ocena
0
P
PrintablesPBer

Plunger Stand

This is a simple plunger stand with a handle. The inner diameter is 152 mm and the outer diameter is 187 mm. It also could be use for other stuff. No supports.

Pobrania
63
Polubienia
8
Ocena
0
P
PrintablesSedna

Anemone plunger head TPU upgrade

Upgraded plunger head for Leedle Dynamics' amazing Anemone blaster. This hybrid design made of PLA and TPU replaces the plunger head from the original design. No need for elastic cord nor glue nor anything. This new plunger is 2mm longer…

Pobrania
62
Polubienia
15
Ocena
5
P
Printablesiluvhalo

Bathroom Plunger Dish

I was cleaning my bathroom and wanted a dish to store my plunger so it didn't leave a ring. I looked online but nothing really was what I was looking for, so I just whipped this up in Fusion 360 real quick and printed it out.

Pobrania
62
Polubienia
7
Ocena
0

ZWQ S400 - Side cover (Plunger tube)

Cover plates for the exposed plunger tube on the ZWQ S400 Zebra/Red hare. Features a decorative topographical pattern of one of the fields I play at. Print with a brim if you have adhesion issues. I recommend adding some adhesive of your…

Pobrania
60
Polubienia
15
Ocena
0
P
PrintablesBissel
Pobrania
59
Polubienia
2
Ocena
0
P
PrintablesLuBi Tech

Flux/ Solder Paste Syringe Plunger

A plunger for 10cc syringe. Print tips: infill 25% needs support print it lying on the side

Pobrania
59
Polubienia
5
Ocena
0
P
Printablesjaek

SBL 2.0 Plunger Cover

Simple PT cover to protect the goodies. Print in TPU to help resist oil. Elastic holes are sized for 3mm elastic cord, and can be tied to keep covers on.

Pobrania
58
Polubienia
21
Ocena
5
P
Printablescfelicio

Mobile Plunger Clothes Washer

This is a plunger style washer, with a mesh and breathing holes, to maximize potential for agitating dirt out of your clothes. Large bucket and broom handle not included! There is also a commercial version of this called "breathing mobile…

Pobrania
57
Polubienia
7
Ocena
5
P
PrintablesDarthxRinzler

AtGames Legends Pinball Plunger Potentiometer Bracket

For those of you that are gutting the ALP internals and going full OTG, instead of buying a new plunger (which usually uses a slide potentiometer) I decided to make my own that slips over the stock bracket. The back plate screws to the…

Pobrania
57
Polubienia
5
Ocena
0