Wyniki wyszukiwania: runcam

Sortowanie

353 modeli

P
PrintablesTimeless3D

ThumP: A Runcam Thumb Pro Mount (open source)

This is a Mount for the Runcam Thumb Pro, based off the rather nice looking model by JoyMonkey (available here: https://www.thingiverse.com/thing:5433478 ). I plan to make some various other mounts for this camera,so stay tuned, and don't…

Pobrania
470
Polubienia
11
Ocena
0

CANOPY - BetaFPV Meteor75 Pro Runcam TBS nano 32 VTX - CANOPY

I designed a canopy to fit a Runcam and TBS nano VTX onto my Meteor75 Pro Frame. It closes with the help of 1-2 Zippies, velcro cable ties or glue or string or anything else. ==> NO ZIP-TIES ON PREVIEW PICTURE!!! The VTX antenna is…

Pobrania
444
Polubienia
40
Ocena
5
P
PrintablesHelios8154

RunCam Pheonix 2

A placeholder model of the RunCam Pheonix 2 fpv camera for quadcopters and multirotor cad assemblies.

Pobrania
392
Polubienia
9
Ocena
5
P
PrintablesProject Horizon

Runcam 6 Rocket Mount

I designed this to be used for high powered rocketry for the new Runcam 6 camera. It has a 7.5 degree viewing angle offset from the body tube to help get a better shot of the surrounding area. The cover slides on/off to easily secure the…

Pobrania
345
Polubienia
15
Ocena
5
P
PrintablesJRD

Darwin FPV Baby Ape 2 Runcam Thumb Pro V2 Mount

Simple mount to hold the latest runcam thumb pro in place Angle is set at 30° Print in flexible material on eithe DLP or FDM I used sainsmart TPU - easy to print and durable

Pobrania
342
Polubienia
13
Ocena
0
P
PrintablesBrian Berkley

RunCam 5 GoPro Mount Case v1.4

This is inspired by SSCraft's Runcam 5 GoPro Mount Frame on thingiverse: https://www.thingiverse.com/thing:3884268 Also, this model by SkyCamOne was used for visualization of the design: https://www.thingiverse.com/thing:3723863 This is…

Pobrania
315
Polubienia
11
Ocena
3

RunCam Thumb Pro GoPro style mount and Lens Cover

This is a remix of the ThumP: A Runcam Thumb Pro Mount (open source) whose original author is @Timeless3D . It is based on the V2 Jello Wrangler variant with the following modifications: Reduced the length of the lens shroud which allows…

Pobrania
267
Polubienia
11
Ocena
5

Runcam THUMB model + FPV mount

model with integrated support for ease of use and easy to print

Pobrania
257
Polubienia
12
Ocena
5
P
PrintablesGarry Tran

RunCam Thumb Pro 4k anti-jello gopro mount

Print in TPU and 100% infill with supports (that's what I did anyway on my a stock Anet A8)

Pobrania
236
Polubienia
11
Ocena
5
P
PrintablesspectrexFPV

Runcam Thumb Pro W/V2 GoPro Mount

Runcam Thumb Pro W/V2 GoPro Mount Comment or message me to request a model for your camera Features: Support standard GoPro Mount: M5 holes To see how it fits, check out the Flipmini Mount Print Settings Printer: Creality Ender 3 Filament…

Pobrania
235
Polubienia
15
Ocena
0
P
PrintablesExplyy

Runcam Thumb Pro (W) GoPro Mount

Mount for the Runcam Thumb Pro (W), with GoPro style mounting holes. Designed to be very lightweight yet durable Pushes the camera towards the front of the quad to leave the most amount of space for the battery behind it. Designed to be…

Pobrania
220
Polubienia
7
Ocena
0
P
Printablessigsegv0x0b

Runcam Thumb 2 mount for FPV drone

I crash frequently and don’t want to risk breaking my camera. This mount does a decent job of helping the Runcam survive crashes, although the ND filter often breaks. Still, replacing a filter is much better than losing an entire camera.…

Pobrania
202
Polubienia
16
Ocena
5
P
PrintablesIsTim

Crux35 - Runcam Thumb Pro Camera mount

This mount holds the Runcam Thumb Pro camera on the Happy Model Crux35. I'd recommend printing in TPU with the camera mount facing up with the large flat side down. Print Settings Printer: Elegoo Neptune 3 Pro Rafts: No Supports: No…

Pobrania
201
Polubienia
8
Ocena
0

RunCam Thumb Pro v2 GoPro style mount and Lens Cover

The Runcam Thumb Pro v2 has a bigger FOV and is a bit shorter than the v1. Because of this, with my previous remix the camera would catch parts of the mount in the frame. Not sure which one you have? Check the following image: Like my…

Pobrania
159
Polubienia
7
Ocena
4
P
PrintablesKrasimir

Runcam Thumb 2 mount for Naked Go Pro plate

I couldn't find anything like it, so I simply made it. It took me few iterations, but I believe it's fitting firmly now, without the extra stress the original mount one has. Oh, and I wanted it to fit a smaller plate, of course :) Print…

Pobrania
152
Polubienia
15
Ocena
0

RunCam Split 4 Control Board

This is a blank for size fitting.

Pobrania
141
Polubienia
4
Ocena
0
P
PrintablesRice_Bowl

Whoop Canopies [Runcam Nano 3, Foxeer Razer Pico, LDARC 199c V2.1]

The Runcam Nano 3 bracket is the same as the one used with the Mobula Canopy which attaches to the back of the Nano's backside and is attached to the canopy via 2 screws. Normally, you would print this in a rigid filament such as PLA. The…

Pobrania
140
Polubienia
8
Ocena
0
P
PrintablesWolfcharm

RunCam Helmet Camera Lens Mount

Used M3 25mm doublesided adhesive tape. Mount looking straight forward and horizontal

Pobrania
137
Polubienia
8
Ocena
0
P
PrintablesMcLogo

Runcam Thumb Pro mount for AOS 3.5 v2

This is a mount for the AOS 3.5 v2 to fit the stock Runcam Thumb Pro 4k holder or similar cam holders. I've added 2 versions - v5 is the earlier that allows a bit less uptilt and v6 lets you adjust the uptilt higher for faster flying.…

Pobrania
133
Polubienia
5
Ocena
5
P
PrintablesKPV

Foxwhoop 25 Runcam Thumb Pro Mount

Camera mount for the Foxeer Foxwhoop 25 Cinewhoop to hold the Runcam Thumb Pro 4k camera at a fixed angle.

Pobrania
131
Polubienia
5
Ocena
0
P
PrintablesAnthonyH

RunCam 6 Pan Mount

I couldn't find any RunCam 6 mounts so I created this to hold the camera and an adjustable base that will mount on a servo to provide pan viewing. Requires two M3x6 screws to mount the camera holder to the base. The base has a hole that…

Pobrania
130
Polubienia
3
Ocena
0
P
PrintablesNordfpv

Runcam ThumbPro Mount for GoPro base

This is a mount for the Runcam ThumbPro, to be printed in TPU. This case will fit a regular GoPro mount. Lay it down on the side, flat side down, curve opening to the top to print. Support only around the screw hole.

Pobrania
129
Polubienia
11
Ocena
5
P
Printablesqczek

Micro Gimbal for RunCam 2

This is small brushless gimbal for RunCam 2 camera. You will need micro storm32 (or similar size) gimbal controller, two 1806 motors for roll and pitch axis, and single 2206 motor for yaw axis. Print Settings Printer: GATE 3Novatica…

Pobrania
123
Polubienia
17
Ocena
0
P
PrintablesNoahLikeTheArk

Angry Mobula 6 + Runcam Nano 3 Canopy

I remixed the moblite canopy to use a front screw so it would be compatible with a full size flight controller. The angle is about 30 degrees using the last hole. Category: R/C Vehicles

Pobrania
122
Polubienia
7
Ocena
0
P
Printablessbuerger

Runcam 2 integration for RC models - construction kit

These are some files that help you fit a runcam 2 to RC models, primarily addressing CAD designers who make their own construction in a (vector based) CAD or (polygon based) 3D application. Note that these files are not meant to build a…

Pobrania
120
Polubienia
13
Ocena
0
P
PrintablesWayne

TBS Source One v5 GPS, Runcam Antenna, XT60 Mount

Printed with tpu .2 layer 4 wall no support

Pobrania
111
Polubienia
3
Ocena
0
P
PrintablesCraftyFPV

Runcam Orange 5 GoPro_mount_V2

The original mount this design is based off of had the bottom mount section not quite joined with the mount (see included pic) so I adjusted the design slightly to reinforce the bottom mount, and make it slightly easier to print. Remixed…

Pobrania
111
Polubienia
3
Ocena
0
P
PrintablesKrasimir

Runcam Thumb 2 round box

Round screw box with lid for storing Runcam Thumb 2 and 4 ND filters. Second version, which fits a bit more. I will do a refined version soon, which can be slightly bigger in size ( and shorter in height) , but fit more.

Pobrania
100
Polubienia
17
Ocena
0
P
PrintablesLeif

Runcam Thumb Pro 4K ND Filter Container (+6 Slots for Micro SD Cards)

I've created a little container to carry up to 4 ND Filters from the Runcam Thumb Pro 4K (new Wide edition). Additionally there are 6 slots for MicroSD Cards. The lid is thread based with about 0.3-0.4mm tolerance so it should work with…

Pobrania
98
Polubienia
11
Ocena
5
P
PrintablesspectrexFPV

RunCam Thumb Pro 4K CineLog25 V2 Direct Mount

RunCam Thumb Pro 4K CineLog25 V2 Direct Mount Features: Direct Mounting to the CineLog25/Cinelog25 V2, one part, nothing more Shock and vibration-absorbing geometry, enjoy jello-free footage Tight fit - good amount of friction to withhold…

Pobrania
98
Polubienia
10
Ocena
0
P
PrintablesVincent12FPV

Runcam Thumb Pro 4K mounting

This are two generic model to mount the Runcam Thumb Pro 4K on a GoPro style mounting support. The bottom version will fit most cases but for some of my drone I prefer the back to have a better placement of the camera. To be printed with…

Pobrania
98
Polubienia
4
Ocena
0
P
Printablesanttix

Pavo20 Pro RunCam WifiLink2 Bracket

Highlights Weight-optimized at only 7 grams Covers the camera module from three sides at full tilt range (0-30deg) Two 3.5mm antenna mounts accommodate your favourite CP antennas Optional lightweight arms to use with simple dipoles that…

Pobrania
96
Polubienia
4
Ocena
0
P
PrintablesCitruzzzor

Runcam Thumb Pro-W round box

The round screw box for Runcam Thumb Rro-W with 4 ND-filter slots and two misc pockets. In my opinion, this is the best implementation of the box without annoying falling out lids and breaking latches

Pobrania
93
Polubienia
13
Ocena
0
P
PrintablesSlavik Nychkalo

TinyWhoop Canopy Runcam Nano 3

This is a strong and light Tinywhoop style (25.5 x 25.5 mounting) canopy specifically deigned for Runcam Nano 3 Here is available two models: - 52mm with 52mm home for antenna. Originally antenna have 5mm diameter, so this model will fit…

Pobrania
93
Polubienia
8
Ocena
0
P
PrintablesWaffles4Penguin

Cetus X + Runcam Thumb Mount

WARNING: I have used this canopy on the Cetus X for a while, it was decent, however I think now I tied a few incidences to the design. Ever since I have been using this canopy I designed, the cameras have been breaking at the screw…

Pobrania
92
Polubienia
7
Ocena
0

TBS Source One V5 Runcam Thumb mount

Printed in TPU, mount for the original Runcam thumb

Pobrania
87
Polubienia
4
Ocena
5
P
PrintablesNordfpv

Runcam ThumbPro adjustable mount for small bases

The printed part fits a Runcam thumb pro, and can be attached to small bases like the GEPRC for the naked GoPro from GEPRC. Screw size is M2 Print in TPU, lay it on the flat size with the curve opening to the top. Support only around the…

Pobrania
86
Polubienia
6
Ocena
2
P
PrintablesLegoRJ35

EMAX Tinyhawk II Runcam Thumb mount

A mount for the Runcam Thumb on the EMAX Tinyhawk II The bottem can you use in TPU or PLA, the top only in TPU

Pobrania
82
Polubienia
5
Ocena
0
P
PrintablesNick218

RunCam Thumb 2

A model of the runcam thumb 2 as accurate as I can make it with all vent and port holes modeled.

Pobrania
81
Polubienia
3
Ocena
0
P
PrintablesKobe Purraxxus

Runcam Thumb 2 mount for Phoenix FPV drone

To mount this to your Phoenix you will need longer m2 screws, and 1 m3 screw.

Pobrania
80
Polubienia
3
Ocena
0
P
PrintablesJason

RunCam 5 Orange Edition Mounting Case

I wanted to attach my RunCam 5 Orange Edition to my Airsoft gun and after looking around the web for one that fit my needs I couldn't find one. I decided to make one from scratch that fits my needs. This will hold the camera tight with…

Pobrania
80
Polubienia
10
Ocena
0
P
PrintablesChrisVaisnor

RunCam Spotter V2 FPV Camera Mount for 30mm Cooling Fan

This small FPV camera is usually meant to have cool air passing by it when mounted on a RC drone or plane. I wanted to mount it on my RC crawler and had a 30mm fan in my leftover electronics box. Center distance of the fan holes is 24mm.…

Pobrania
79
Polubienia
8
Ocena
5
P
PrintablesP3D

Pavo 20 Pro Runcam Wifilink 2 Canopy

Pavo 20 Pro Runcam Wifilink 2 Canopy This is a custom-modeled canopy for the Pavo 20 Pro, designed to fit a Runcam Wifilink 2. Printing Recommendations: Material: PETG or PLA Infill: Minimum 15% Gyroid Layer Height: Maximum 0.2mm…

Pobrania
77
Polubienia
7
Ocena
0
P
PrintablesBddha

AOS 5 V2 - Runcam Thumb Pro Mount

Camera Mount for the Runcam Thumb Pro for Chris Rosser's AOS 5 V2 frame

Pobrania
75
Polubienia
3
Ocena
0
P
PrintablesLICK_THE_BUTTER

Flyfish Volador VX3 Runcam Thumb Pro W Freestyle Mount

original design is by FabianP on Cults 3D

Pobrania
74
Polubienia
6
Ocena
0
P
Printablesknoopx

Runcam Nano 3 19mm Adapter (mobula6)

Same dimensions as the one on the mobula6 Category: R/C Vehicles

Pobrania
74
Polubienia
5
Ocena
0
P
PrintablesChris Thijssen

Tiny whoop runcam nano3 canopy

Tiny whoop canopy for the runcam nano3. Cam angle is about 45 degrees and 0,55 grams Update 2023 v2 canopy . It's a bit smaller 0,53gr and bit higher cam angle and holes are smoller for a tighter fit. (the scale and the black frame is V2.

Pobrania
73
Polubienia
12
Ocena
0
P
PrintablesTheo Jarmer

Runcam Thumb Pro Drone Mount

To make the mount follow these steps: Print the model using 4 perimeters, 100% infill and 0% fan cooling (~25 min) Attach the Runcam Thumb Pro case (comes in with Runcam) to the 3D printed mount using one of the M2 screws and one M2 nut…

Pobrania
73
Polubienia
9
Ocena
0
P
PrintablesTommegg

Runcam Thumb 2 Rugged Case

Rugged protective case to store Runcam Thumb 2 for travel. It uses included foam from your purchase of Thumb 2 for added shock and scratch protection. Also included is room to store your ND filters for easy carrying and swapping on the…

Pobrania
72
Polubienia
11
Ocena
5
P
Printablesherrb

happymodel crux3 canopy for runcam thumb

This is a canopy based on the original for the Insta360 go. I'm sure it can be used for other micro drones (especially ones with the CrazybeeF4SX1280 ELRS FC). Printed with TPU. Make sure not do to layerhights over .2mm. I appreciate your…

Pobrania
72
Polubienia
7
Ocena
0
P
PrintablesWaffles4Penguin

Cinelog 35 (v2) Runcam Thumb Mount

I ordered a cinelog 35 v2 and wanted to use a runcam thumb pro instead of a gopro, so I went looking for models, and found this one. I changed out the top mount for a smaller runcam mount, and it fits well. I printed the two parts in TPU,…

Pobrania
70
Polubienia
2
Ocena
0
P
PrintablesWilliam Call

RunCam HDZero Nano 90 Camera Protector

TPU protector for the RunCam HDZero Nano 90

Pobrania
69
Polubienia
3
Ocena
5
P

Speedybee Master 5 HD Runcam Thumb Mount

Runcam Thumb Mount for Speedybee Master 5 HD. Print in TPU.

Pobrania
68
Polubienia
3
Ocena
0
P
PrintablesTKS

Runcam thumb dummy

Its just the runcam thumb so it make easier to design a mount for your FPV drone .

Pobrania
67
Polubienia
6
Ocena
0
P
PrintablesDLQFPV

RunCam 5 Gyroflow ImpulseRC Apex Mount 25 degrees

HD mount made for the Runcam 5 camera and the impulseRC APex frame. Has a slot for ND filter. You do need to use supports. best printed on the side. Print in TPU.

Pobrania
67
Polubienia
3
Ocena
0
P
PrintablesThe Bengineer

GEPRC Mark5 Runcam 5 mount

Fixed angle TPU mount for Runcam 5 Orange on GEPRC Mark5 FPV drone frame. To be mounted without the carbon plate. Camera Angle: Choose the file for your preferred angle. Dm me or comment for custom angles, I can quickly export your…

Pobrania
67
Polubienia
6
Ocena
5
P
PrintablesBlake

Runcam Thumb 2 - GoPro Style Mount

This is a GoPro Style mount for the Runcam Thumb 2. It features a better fit then the original one provided by Runcam as well as thinner mounting tabs. The tabs are 2.5mm thick. Print Settings: Material: TPU Infill: 15% Supports: Yes I…

Pobrania
65
Polubienia
2
Ocena
0
P
PrintablesDavid Frey

RunCam2 4k Mk3A1 Rocket Mount

UPDATE (08/15/2023): I have flown several launches with this mount and even with zip-ties, there is still a little bounce/rattling. I suggest you shim the camera with the zip-tie cutoffs or other thin stock (left-over balsa?) until I can…

Pobrania
64
Polubienia
5
Ocena
0
P
PrintablesIgor C

OpenIPC RunCam WiFiLink bracket.

This bracket is made to address the issue of pendulum fastening of WiFi module of RunCam WiFiLink OpenIPC unit. It has 3 modifications for different antenna placements. It can be carefully put on without any disassembly or disconnections.…

Pobrania
64
Polubienia
6
Ocena
0
P
Printablesschochk

RunCam Micro Adapter

RunCam Micro Adapter Adapter to mount a 19mm camera into a 28mm camera holder. Print instructions 0.1 mm layer height 20% infill No Supports needed

Pobrania
62
Polubienia
5
Ocena
0
P
PrintablesX_XGothic

runcam thumb gopro mount

remix, make it stronger and fit form gopro mount Category: R/C Vehicles

Pobrania
62
Polubienia
2
Ocena
0
P
PrintablesSmog2027

Runcam Thumb Pro + FPV Camera Gimble 2 axis

Mostly uses M2 screws, screw into 3d print plastic. Capable of full 180 degree tilt and 360 degree swivel. NO wire protection yet - that will be added soon.

Pobrania
61
Polubienia
13
Ocena
0
P
PrintablesPixBalance

Runcam Thumb Pro ND Filter Box

Recommendation Print in PLA or PETG, use m2 screws to mount hinge. Everything gets better with coffee! https://ko-fi.com/pixbalance

Pobrania
60
Polubienia
9
Ocena
0
P
Printablesshevron

RunCam Thumb Pro mount for Bee35

A mount for your RunCam Thumb Pro for a SpeedyBee Bee35 frame. It replaces the GoPro mount TPU provided with the drone, and connects to the TPU cover that comes with the camera. Easy to Remix The STEP file contains two parts that can be…

Pobrania
59
Polubienia
3
Ocena
0
P
Printablesknoopx

Anteater Runcam Nano 3 Canopy

Sturdy, durable and lightweight (~1.3g) canopy for 25.5mm mounting. No props in view. Category: R/C Vehicles

Pobrania
59
Polubienia
4
Ocena
0
P
PrintablesTimeless3D

Universal Runcam 5 Orange Mount

Universal 35 degree mount specifically designed for a Runcam 5 Orange, inspired by the similar Session mounts, but made from scratch. This is designed to perfectly accept a GoPro Hero 5/6/7 glass stick-on ND filter. Let me know if there…

Pobrania
59
Polubienia
1
Ocena
0
P
Printablesspeed7

GEPRC Mark5 Runcam Thumb Pro Mount

A Runcam Thumb Pro mount for the GEPRC Mark5

Pobrania
59
Polubienia
3
Ocena
0
P
PrintablesTankdeckel

RunCam Thumb 2 Helmet Mount Nolan N80 8

My first and really simple model, designed with Tinkercad. Helmet mount to equip a Runcam Thumb 2 onto the front part of a Nolan N80-8 helmet. Air-intake on the front of the helmet is not obstructed. Its lightweight and strong enough to…

Pobrania
56
Polubienia
3
Ocena
0
P
PrintablesPcDoc

BabyApe 3 Pro Base for Runcam Thumb Pro

This camera mount works with all Runcam Thumb cameras and the original camera holder. The 2 screws in the back are the original screws, whereas the one in the front is a spare M2 with a self locking nut. Best to remove the top plate of…

Pobrania
56
Polubienia
2
Ocena
0
P
PrintablesG8torx

Apex Micro 3" RunCam Mount

Simple mount designed for using either the normal runcam or runcam pro. I used 95A TPU for this print.

Pobrania
55
Polubienia
2
Ocena
0
P
PrintablesDavid Frey

Runcam 4 and 6 Rocket Mount - Remix

I made some adjustments to accommodate a Runcam2 camera

Pobrania
55
Polubienia
6
Ocena
0
P
PrintablesTamm'C

Mount RUNCAM Thumb +Pro pour JENO3

Mount RunCam Thumb +pro pour Jeno 3

Pobrania
54
Polubienia
1
Ocena
5

Hot Wheels RunCam camera car

This RunCam 5 camera platform for Hot Wheels track that I made for my children. It works well on straight tracks but get stuck in Garage Tower. It uses four 624ZZ bearings as wheels and prints with supports as shown on one of the pictures.

Pobrania
53
Polubienia
32
Ocena
0
P
PrintablesFlyingT

Rekon 35 - RunCam Thumb Mount

Remixed so it can be used with the original screws. Attached a crude STEP file, so you can modify it further if needed. Tried it out and worked very well now :)

Pobrania
53
Polubienia
1
Ocena
0
P
PrintablesNordfpv

Runcam ThumbPro Vertical/Horizontal mount

A Vertical/Horizontal mount for the ThumbPro that fits into the GERPC naked GoPro base. Designed to be printed upwards with support only on the screw hole for best quality and printing speed (see picture for orientation and supports).…

Pobrania
53
Polubienia
5
Ocena
0
P
PrintablesDerOskar

Runcam Racer Nano 4 // Switchback Pro // 55°/degree/grad cam mount/camera holder

This is a mount inspired by this: https://www.thingiverse.com/thing:4108139/files Though, he doesnt have a 55 degree mount for the new Runcam Racer Nano 4. The Runcam Racer nano 3 i used before for a long time has a significantly smaller…

Pobrania
52
Polubienia
2
Ocena
0
P
PrintablesNicksk3

Runcam nano 3 mount iflight baby nazgul

A mount for the runcam nano 3 to fit the baby nazgul frame from iflight

Pobrania
52
Polubienia
5
Ocena
0
P
Printables3DP-MAMSIH

REKON 5 Runcam Nano mount

Simple Mount from the original design to 14x14x15mm runCam Nano Print Settings Printer Brand: Prusa Printer: I3 MK3S Rafts: Doesn't Matter Supports: Yes Resolution: 200 infill: 20 Filament: SainSmart TPU Black Category: R/C Vehicles

Pobrania
50
Polubienia
5
Ocena
0
P
PrintablesFX

PAN for Runcam Mini, Rotation 90° to 180° for 9G servo

Print with PETG with 0,1 layer. Use servo crews to mount cam gear and to mount gearbox on servo.

Pobrania
50
Polubienia
4
Ocena
0
P
PrintablesDLQFPV

RunCam 5 Mount for TBS SOURCE ONE V3

Runcam 5 mount designed for TBS SOURCE ONE V3 available in 25 and 30 degrees. Best printed on the side with supports and of course in TPU. If you want me to print it for you check out dlqfpv.com

Pobrania
50
Polubienia
2
Ocena
0
P
Printablesjauler

A parametric canopy for Runcam Nano 4

A Canopy for Runcam nano 4 A canopy for runcam nano 4 camera designed for standard 65mm whoops. Although it should fit any frame which has 25mm square mounting pattern. The model itself has a camera angle of 40°, but it can be changed in…

Pobrania
48
Polubienia
1
Ocena
0
P
PrintablesVincent12FPV

Runcam Thumb Pro 4K Drone FPV support

Support for the runcam ThumbPro 4K Category: R/C Vehicles

Pobrania
48
Polubienia
3
Ocena
0
P
PrintablesBoilerBoy

BQE Rip Squeak Runcam Thumb Mount Base

These mount bases attach to the the TPU camera sleeve provided with the Runcam Thumb HD camera. Files are provided for both versions of the BQE Rip Squeak quadcopter frames - the Rip Squeak OG and the Rip Squeak V2. I designed them…

Pobrania
47
Polubienia
2
Ocena
0

Runcam thumb micro sd cover

This is a back cover for Runcam thumb, I print thumb in pla+

Pobrania
47
Polubienia
6
Ocena
0
P
PrintablesspectrexFPV

Supafly Flipmini Camera Mounts (Insta360, DJI, RunCam, etc.)

Supafly Flipmini Direct Camera Mounts Comment or message me to request a model for your camera Changelog: [19/03/2024] Support 2+ cameras: Runcam Thumb Pro W and Insta360 Go2 [23/03/2024] "Runcam_ThumbPW" has been modified to eliminate…

Pobrania
47
Polubienia
2
Ocena
0
P
PrintablesSeb3D

Runcam Nano 3 Canopy

Remix of runcam nano 3 canopy a bit stronger with extra arms and a spoke in the middle to absorb some of the imparct.

Pobrania
46
Polubienia
5
Ocena
0
P
PrintablesBwb Creations

Runcam mount for trx4m bronco.

i made this to hold a runcam behind the windshield of the trx4m bronco. i did print it so it would lay down sideways so when installed the layer lines are vertical. used 2 of the extra screws that came with the runcam to change the oe…

Pobrania
46
Polubienia
15
Ocena
0
P
PrintablesDionarap

iFlight Chimera 4 RunCam Split 4k holder

TPU printed holder for the RunCam Split 4k. It hlds the Camera and the Board. other Split style cam's could also work. I designed it for the Split 4k. the board is just held in the TPU no Screws needed. the Cam gets mounted normal with…

Pobrania
46
Polubienia
3
Ocena
0
P
PrintablesKeith Luneau

Pan Tilt for Runcam 3S with micro FPV camera

This is a pan and tilt unit designed around Runcam's new HD camera, the 3S. It also holds a micro FPV camera along side the HD cam so the pan and tilt together. (I prefer using a separate FPV cam) The tilt servo will stick to the bottom…

Pobrania
46
Polubienia
5
Ocena
0
P
Printablestexasr3d

BetaFPV Air 65 TPU Canopy for RunCam Nano 4

Version 1 is simply a widened lens diameter (from 10mm original to 12mm for RCN4). I would recommend this version. It is a very snug fit around the lens. Version 2 is slightly experimental. It has slots cut into the lens mount to enable…

Pobrania
45
Polubienia
7
Ocena
0
P
PrintablesSebWer

Canopy for Moblite6 - Runcam Nano 3 - 65mm frame (10, 15, 20, 25 deg)

I have designed canopy for my Moblite6. You can find range of angles 10, 15, 20, 25 deg. There are some variations with holes to lower the weight. They are designed to easily access camera screw. Please leave your like if you appreciate…

Pobrania
44
Polubienia
0
Ocena
0
P
PrintablesevilC

HDZero (RunCam) Nano Lite lens focusing tool

This tool is designed to allow you to easily focus the lens on the camera without having to remove it from the camera mount. It also does not obscure your FPV view while it is attached, so you can pop it on and use one of the arms to…

Pobrania
44
Polubienia
6
Ocena
0
P
PrintablesmonkPL

Better Runcam 5 gopro mount

Better runcam5 mount for gopro mounts. Print Settings Printer Brand: Creality Printer: Ender 3 **Rafts:** No Supports: Yes **Resolution:** 0,175 Infill: 100 **Filament:** Print-Me TPU Notes: print on the front, you can remove supports…

Pobrania
43
Polubienia
1
Ocena
0
P
PrintablesPaskuRT

Cinelog25 support Runcam Thumb Pro V2

Support for Runcam Thumb Pro V2 camera

Pobrania
42
Polubienia
1
Ocena
0
P
PrintablesAn2

Crux35 - 25 degrees mount for Runcam Thumb Pro Camera

This is a camera mount for the Runcam Thumb Pro Camera on a Happymodel Crux35. It protects the camera an provides a fixed camera angle of 25 degrees. Enjoy! Print Settings Printer: Self built Rafts: No Supports: Yes Resolution: 0,2mm…

Pobrania
42
Polubienia
3
Ocena
0
P
PrintablesVincent

SSG10 scope riser for runcam

A scope riser for runcam attatchment

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesRey

Runcam Thumb Pro 4k mount for betaFPV 95x v2

Well... as the mount of TPU of this camera is not exactly like the GoPro I had to make one for my 95x v2. I made it thinking about the dampers, this is probably not the final version of it but I think it will work just fain. Its made in…

Pobrania
41
Polubienia
3
Ocena
0
P
PrintablesAndi

Runcam Thumb pro mount 25° for Quadmula Siren F3 / F35

Made a simple but effective fixed 25° mount for the Runcam Thumb pro for use with the SF3. The ‘plate’ was made using the files Quadmula kindly provided, the runcam mount is a model I found somewhere but can't remember where. Works great…

Pobrania
41
Polubienia
0
Ocena
0
P
PrintablestheFPVgeek

HDZero Lite / Runcam Nano 3 Whoop Camera Mount w/Hood (Adjustable Angle)

Remixed HDZero Lite Whoop Camera Mount (Adjustable Angle) by MrShutterBug to include a hood for a little added lens protection. High - HDZero Lite Lens Med - HDZero Lite Lens (glued like in MrShutterBug's video - less surface area to hold…

Pobrania
40
Polubienia
1
Ocena
0
P
PrintablesDanO83

SabotageRC Dingo Runcam Thumb Pro anti vibration mount

SabotageRC Dingo Runcam Thumb Pro anti vibration mount made for this mount : https://www.thingiverse.com/thing:5442773

Pobrania
40
Polubienia
1
Ocena
0