Counting matching models…
I bought this DeWalt DCV580 at a thrift store with only the hose. I needed attachments and made these with a way to store the extras. Crevice Tool: Similar to the original and also clicks into the DeWalt handle for storage and will not…
This is an attachment that will reduces the noise coming from the exhaust port. Best to print port with small side down with brims to hold it down. I also printed with no supports. The reason for small side down is, if large side down…
First, the original I modified is a very beautiful structure. Please check it out. I've bought battery backup bulbs before and when the power went out, they were not very bright. I made this for any power outage and with several batteries…
There are others out there, but I wanted something a little different. These are easily installed and removed with a screw. My mother-in-law liked them better than the original caps. They help ride over rugs in both directions. They fit a…
Trying to pull the top open on a previously used bottle can be difficult. This will lift it up easily with leverage. It will slide in and work either direction (as pictured). There is an 8mm hole in the handle for hanging or a 10mm recess…
This will take a little bit of mechanical work to complete. All parts printed without supports. Parts and tools I used. 3/8-16 ready thread rod about 6 to 6 ½ inches 5/16 flat washer 6-32 x 3/8" screw #6 flat washer super glue 6-32 tap…
If you run straight cable to the camera Tapo supplies a waterproof cover for the wire but for wireless, no cap supplied for the exposed RJ-45. I made one just for that purpose. Sorry for not having a better photo but I did this last year…
I was wanting a resaw featherboard for my Rikon bandsaw. The saw has ¾" t-slots. I made two different T's that fit snugly. One has printed ¼-20 threads and the other has a hex in the bottom for a ¼-20 Nylock (choose one). I wanted the…
The sleeve length is the size of the 20700. If you need the length of the 18650, in the slicer only change the size in the Z coordinates. I used a brim of 10 in printing.
This requires no modification to the lantern itself other than two solder connections. I know of two different types of these lanterns. Type 1, as I call it, is the older version that I have had for the last year or two. Take off the…
I needed a panel mount fuse holder for a project did not want to buy ten from Amazon. I designed this one and while I was at it a mini fuse version. For the connectors I used terminals from a set I bought from Amazon a few years ago. I…
Small roll solder holder. Designed to fit my roll of solder that has a 25mm hole diameter by 20mm thick. Outer roll diameter is 55mm. Screws should form their way into the plastic for a tight fit. Assembly: Screw both sides together and…
This adapter was used and tested on the 40v EZ Clean 600. Since the washer connectors are the same it will also work on the 600 18V +one version and the 320 18V +one version. The jug handle is useful to steady and control the washer.…
Designing around many complex angles was done by trial and error. If it looks a little cobbled together, it was, but it does give it better support from falling over on uneven ground. Downside: To remove the nozzle tube, the stabilizer…
Printed on an Ender 3 with a magnetic pad. I set the print at 45 degrees on the bed to keep it from the edge to help prevent any curl up. Used 3D-Fuel Lulzbot Green PLA. I used the same screws to mount the new plate and slowly lowered the…
Takes 5 to 7 hours each to print. Ball is 47mm high and the pin is 110mm. I would suggest a raft since any one section coming loose destroys the print. I used PLA at 0.20 layer, 3 walls 20% infill. I am also including STL's to have a…
This fits on the lug nut and easily allows you to start the nuts on the threads. The nut would slide back using a deep well socket and not start. Should fit any 21mm nut. Only had to clip a few strands of plastic from inside. This is for…
Modified Battery Storage (CR2032 & CR2025) from Popcorn to store different size batteries.
Paint Can Opener: Provides better angled lift than a screwdriver. Use two for stubborn can. Places on the back side for magnets. Choice of two each 4mm and 6mm, and one 8mm, all 2mm thick. Hangup hole for 6mm. I used PLA at 0.20 layer, 4…
Had a problem with a D cell corroding in my flashlight and had to break the light down to clean it. This adapter uses a single 20700 cell to now power the flashlight. I made provisions to also use an 18650 cell instead. I previously made…
Hanger: This hanger is a more robust one than others I have seen. Ones that print upright has the layer lines that is weaker at the hole and hanger hook. This one prints on the side putting the layer lines straight from top to bottom. The…
This vise clamps to the edge of a bench to be used and removable for storage out of your way. Wooden Jaws: The size of the vise jaws is your discretion. For the vise jaws I used 2x3 studs glued together. After trimming they were about 5"…
These couplers are printed on the narrow side down letting the plastic span across without using supports and giving linear strength. Like nearly any coupler, there will be a certain amount of bowing at the connection. These couplers fit…
I made these with the thought of helping the older people at my church that may have problems with cans and bottles. The smallest one is for drink cans that gives leverage to lift the pop top. The thinnest part is opposite side of the…
Keeping boards flat is nearly always a problem when glueing together. There are many ways to make cauls, this is mine. They are good for up to 27". Hardware: The super strut I used came from Home Depot for around $30 per 10' piece. Cut…
Tried making them with clip-ins like the original but the PLA was not flexible enough and kept braking. I went with the screw together and that works better and less likely to brake. Hardware used are (3) 5mm nuts, (2) 5mm x 30mm screws,…
I have had this center punch for many years and hopefully Harbor Freight has not changed the diameters. The top smooth diameter of the punch is 13.1mm and the knurled part is 14.1mm. The PLA version slips on and the TPU version has some…
These were made for the Gopher Pick Up & Reaching Tool for a relative. One of the cups disappeared from the grabber so I made a replacement set for it. Since I made it from TPU it is flat across the surface. I have yet to try to use…
As a retired machinist most lathes I ran had some type of chuck key holder, always metal, that someone made. I wanted one for this home lathe to prevent it from getting misplaced. It uses the same screws that hold the gear cover plate…
I made this to replace the slide on jaw protecters on the 6" Irwin clamps. (Joint Bridge-Irwin) I am also including the joint bridge that is flat top if you want to modify to your own clamp. (Joint Bridge.stl) Printed on Ender 3, PLA…
After buying them I needed some way to store them. The 1" holder is pictured in white PLA and 2" in black. I bought an extra 2" pad and stem, so I made the 6-hole version. I have the 4-hole version below if you don't need that much space.…
This uses the four hole pad that fits on the Dewalt orbital sander and several other brands. For hardware it uses four 4mm nuts, four 25mm + button head screws or similar, and pad. Hex shapes are in the holes to accept the nuts. I bought…
This prints in less than 30 minutes. It folds over the lantern handles and can be screwed together with a 3mm x 6mm long screw. Threads are one half and through hole on the other. I also have another model that converts the lantern to…
I have a 32oz bottle of Walmart Equate alcohol that snaps so tightly it was difficult to push up the top. This print snaps on the top and gives it leverage to easily open it. I did find I have a second bottle that is slightly different.…
The bottom of shelf has only a small area of plastic to set upon which would make it hard to slide across a floor. The feet give it a lot more surface area. The caps prevent anything from falling or getting into the tubes. No special…
Clips onto clamp lever but does not interfere with lever movement. Uses two 12mm x 3mm neodymium magnets. Thicker magnets can be used. Nothing particular about printer settings but a brim or raft may be needed for good adhesion.
This modification allows you to remove the 3 LEDs from the end of the light to be used with another project and replace the lights with a blank panel. In this process one short piece of wire soldered across two contacts make the other…
I bought the Ryobi at a thrift store without realizing it was a mini joiner. Finding and pricing R2 biscuits at about 20 cents each was high considering I can make them at 10% of that. I made them using 20% wood filled filament. That…
9 cell holder for AA size batteries. Two can be printed to make a cover case for the 14250 cells. Some cells fit a bit snug in the holder. Adjust X and Y a little larger if needed. The spacing is generally too wide in a charger for…
I store my water hose outside for the winter. To prevent water from freezing and swelling the hose, I screw in the cap with the hole and use an air compressor to blow out excess water from the hose. I then use the caps to prevent any…
The only new creation is the stand. No remix of the lighthouse. A simple print with 0.2 layer, 10% infill. Used 3D Solutech marble PLA. Check out the puzzle at Lunar Lighthouse Puzzle Box by 3D Printy | Download free STL model |…
The measured diameter of the bar is 25mm. It pressed on for me and was not loose. Could fit any bar that diameter. The fence cap is for a 4mm x 4mm “L” shape. Print screw at 100% infill.
The compartment sizes for the bits are 60mm x 11, 9, 8, 8, 8, 8. The case lid has runners on the side that ride into the grooves in the case. At the end of the lid is a small lip the goes over the edge of the case to secure it in place.…
I made a rechargeable work light, dual rechargeable light and had parts left over so I made my own design light from leftovers. I have pictured most of the things needed to do this. five printed pieces. From blue light used items: 3 LED…
Harbor Freight U S General 4 Tier Rack. These fit very tightly into the bottom shelf. Test one, if to tight, slice with a percentage down. They also fit this larger white unit but it only works with a piece of the shelving tubing cut off…
Got the saw used with broken cranks. Didn't want to spend $50 for new ones. These fit a D shaped ½" shaft, so it could fit other saws as well. The process for fixing. I used an one inch Forstner bit to bore out the center. First I needed…
It took me a long while to get the design where I wanted and get the bugs out that I found. Some things you should know first. I have repaired many battery types over the years, but this is my first battery from scratch. I used salvaged…
Just a simple short print to spread apart the light stems. General print settings. For outside use ABS, ASA, or PETG would be better, but it takes little time to replace in PLA if damaged.
Tired of buying AAA batteries and picking up light to see it not very bright when I needed it. To intricate for me to recreate black back housing so I went with the piggyback approach. The only modification to the original is one small…
I found this gasket online from EBay for $2.50 + $30.00 shipping. Others in a gasket set for $40+. After checking TPU filament usage for gaskets I thought I would give it a try. what I found that TPU is quite resilient to liquids and…
Somehow the center piece of my bump head disappeared. I used two pictures I found to make a working version. Basic standard settings for printing. About a 45-minute print.
From time to time the power cord would work loose from the camera and drop away. This keeps them together. I used PLA at 0.20 layer, 3 walls
The feet and caps are 41mm light press fit. The fit did vary due to shelf molding differences. One foot hole in the shelf was slightly larger. By wrapping the foot stem one time with masking tape made a good fit. I used generic PLA with…
Made from solid infill TPU filament. I added the battery connectors to my cars and have the connector hanging outside the vehicle for quick connection to my charger. These plugs help keep out debris and water from the connector when not…
Ran across these UK containers and thought it would be neat to convert one to a particular US lid. These unusually shaped Food City store, That's Smart labeled milk jug lids are larger than normal milk jugs and that makes for a little…
The holder is adaptive to use a 3mm screw for a small contact point or a metal band for a wider spring contact. For the band I used nickel strips used for spot welding battery packs. Any type of thin conductive metal wrapped around should…
On my third motor for my RY40021 single string line trimmer. High grass wraps around the 5mm spindle above the head and over time binds the motor and slows it down until it overheats and burns up. Hopefully this will keep the grass out…
The stand slides on from the bottom and stops at the meters ridge near the top. It can be easily removed for battery change. The stand moves out to a 45 degree for better viewing angle. The 10mm x 3mm magnet glued into the stand is for…
This is a three-part shell that houses four 18650 cells that will source 7.2 to 8.4 volts with double capacity being that two sets of the cells are in parallel. Using 1-1/2AH cells yield 3AH battery, 2AH cells yield 4AH. Caution: Since it…
If you stand the welder up it falls over when you use the ends. If you lay it flat you wind up lifting it up when trying to use it. This stand is at a 45 angle that help alleviate both problems. It is currently set for a width of 85mm but…
7/18/2025: ( It worked but not as well as I wanted. I reworked it to make it better. It has three pins now versus two. The pins are now flattened on one side and is to be printed on the side to give the layer lines better strength. I…
I used 95A Shore Ziro TPU with 0.20 layer, 1 wall - 2 on the bottom, 35% infill on a Creality Ender 3 will a PEI build plate. It prints straight but will conform to the curve of the trigger. The TPU will bow in some on the finger side but…
I started making a couple of these to bundle printer cables. I figured that various styles would be good for other things, so I expanded the line. There are four different sizes. Approximate inside, flat 12mm x 18mm, small 20mm, medium…
Battery died in my Peak spotlight. Battery cost $10 to $15 online plus shipping. This puts out a little more than 6V and it works and hasn't blown a bulb. Simple parts, the batteries help align the two halves and electrical tape them…
I bought these sticky balls from TEMU online. Listed as “Outdoor Hanging Fly Trap Balls - Sticky Fruit & Insect Catcher for Wasps, Bees, and Pests”. A set of 4 was $3.19 + tax. Less than a $1 each. Has a similar adhesive as the cardboard…
This cover may fit other openers with this similar case. It does fit tight and may need a little carving and sanding to fit. Since the tabs are an overhang and I did not use supports they bowed down a little. I used a pocketknife to trim…
I made these for my magnets. Problems, yes, try to remove one tray and adjacent magnets want to come with it. The opening on the bottom helps to push the tray up by finger. This helps to better control the magnets with the other hand.…
Another thrift store find that did not have all parts. The 6mm knob is used on several parts of the machine. It requires a 6mm nut to be glued in. The vacuum attachment was missing. I created one that fits with the approximate size 32mm…
I made these for my prescription eye drops. The two black holders are for four bottles. Since then, one more bottle has been added, and I went to the white press in holders. The bottles can be picked up with the stand attached and still…
I started with a nice slide connector from OTandAT on Thingiverse. I built around it for the base. I made center section to house electrical and added a top cap to mount light. Parts: 16 LED spotlight or your choice. Amazon 4 for $13,…
I bought this little tesla coil kit from Temu for a few dollars just to play with. Amazon also sales it. It does need a 9-to-12-volt power supply. I decided to run it from (3) AA 3.7-volt lithium cells. Parts: 5.5mm x 2.1mm DC input…
A tube that the outside diameter is the size of AA battery and slightly larger inside hole for the AAA battery. The thickness of the end is 4mm with a hole for a 3mm screw to be used for a contact. Depending on how tight the fit, use a…
For the Harbor Freight Tools Hercules brand hammer drill. This slide on the collar and the blue knob tightens it down. Does not take much pressure. The sliding bar has about 35mm or 1 ½" travel. Several rods can be cut for a large range.…
Bought two used shelf units with one set missing the top cap. The pictures show the original on the left and the new one on the right. The shelf sizes are 18 x 36 and 24 x 36. They both look alike but only one set has Keter on the end…
I made this to prevent anything from coming in contact with the sharp carbide tips during storage. It is magnetically coupled with four 4mm x 2mm neodymium magnets . It prints in one piece with a 1mm gap between the two halves. No…
This started out as just a battery powered 12V car accessory outlet that evolved into this finished model. The main printed parts are the main case, handle, and base. Not knowing if extended use pulling several amps would heat up the…
Print release clip on side for strength and the body upright with supports. I used generic PLA with basic settings. Use a 3mm socket head cap screw and nut to mount release clip to the body. Use two 4mm socket head cap screws for back…
This single cell charger uses either micro-USB or USB-C cards (pictured). The boards are nearly identical. You will need two pieces of wire and two Keystone 209 Cell Leaf spring battery contact. I bought mine from eBay five years ago.…
I recently pull my hamstring muscle. Some years ago, I went through therapy using a device to pull and exercise that set of muscles. I could not find my original pull rope so I can now make one. It has two hand holds and one bar to place…
Two separate incidences for making these lids. I dropped the unopened jar of peanut butter, bounced off my foot into a metal leg and broke the lid. The shortening was bought clearanced due to a missing lid but still had the seal. I know…
I liked the light a lot but for my use I needed a stand preferably magnetic. For the magnet holes I added short supports that print with the stand and snap out. No need for supports. Hardware is one 5mm nut, 5mm x 20mm screw, four magnets…
Bought from Harbor Freight Tools. Tried keeping them in the original packaging which was troublesome. Made this to keep them together and prevent any possible bug from getting inside and potentially clog the outlet hole the next time I…
This is a design for my use. It can be modified for your own. My use is for an Amazon remote switch LED light. The light uses six AA batteries, and I wanted longer lasting lithium power. I modified the light to accept a 3.5mm phone jack…
I was given this Creality Max Neo printer and I proceeded to tune it up and create upgrades for my better use. SD Card Reader: If you use the TF Cards this converts it to full size SC Cards and eliminates wear and possible read failure…
This was made from 90 shore Ziro TPU. Base of the washer is 19.5mm or 0.767 inch (¾) diameter. The stem diameter is 9.5mm or 0.375 inch (3/8). Settings: 0.1 layer, 3 walls, 50% infill. Ender S1 with PEI plate at 60C, nozzle at 230C. I…
I bought a 6 pack of plant grow lights from TEMU. The set are two feet long each with connecting cords, power cord with switch and two different types of hanging clips. One clip has a hole in the top for a small chain or string. The other…
I bought this saw guide from a bargain bin table for a few dollars. It was missing some parts and replacements from Milescraft was cheap enough but 10 to 12 dollars to ship made it not worth it. I had nothing to measure. All items were…
This is something I seldom use so I do not like keeping the batteries in the instrument for fear of possible leakage and corrosion. The batteries can be stored separately, or a spare set can be store with two inside the sensor unit. The…
This is a three-piece nozzle with the black cap made from TPU. The nozzle tube is printed on its side for layer strength. It has a flat side for bed adhesion. No supports needed but there will be a little sag inside the tube. You can use…
These feet can be pushed on or glued on existing thin feet. The thin foot on the drainer is 1.8mm. A brim or raft may be needed to support the thin strip feet on the built plate. I used a PEI with no problem. I used generic PLA, 0.20…
I use this under a carport to keep a car battery charged during periods of non-use. Two clamps hold the charger to a board. A small clip for the power cord and a “J” shaped hook for hanging the charge cord. Settings: 0.20 layer, 3 walls,…
I wanted a different way to store the power cord instead of letting it dangle with a cable clip. These pieces use the existing screws and holes in the saw frame. No modifications or extra hardware for mounting. One right side part is a…
My wife has a metal rack shelves with grow lights for her many plants. Sometimes gnats propagate in the soil and eventually swarm the area. Vinegar in cups have been effective for the problem, but I hate the smell. This is my alternative…
I made this using the Harbor Freight 18" magnetic tool strip. I made mine 8" (200mm) by cutting it into. To remove the center magnet, strip the paper from it and put little drops of Acetone or similar solvent around magnet and start…
My vacuum is 40+ years old, so the filter supply is nearly obsolete and more costly when found. I adapted a newer VF400 / VF500 style 5-20 gallon filter. The printed part is very simple, just a spacer. I did this a long time ago and as I…
I got a hedge trimmer and battery at a thrift store for $15. No charger. A charger and spare battery cost about $70 (used). These adapters allow me to use a Dewalt or Harbor Freight's Hercules battery. I made this in two halves so I will…
I receive these containers as 29 or 30mm in diameter. The label peels off very easily. The holes in the stand are 31mm. There are two sizes, a 9 hole and 15 hole. I used two walls and 10% infill to reduce weight and filament. It still…
I had this old Spotliter with no charger. I replaced the old cells with an 18650 holder and used one of the original charger ports to mount the USB board. Other items needed are two 3mm buttonhead screws, two nuts, 6mm wide metal strip,…
The battery cover name plate sets into the recess and glued in. The plate size is 14 x 55 x 4mm thick. The blue section is 3mm and the white text is 1mm. It just requires a simple filament change after the 3mm layer is printed. The only…
Care should be taken working or modifying lithium cells. Ryobi batteries sometimes will refuse to work or charge and returns an error code light. A code has been rewritten on the BMS board that locks out the board from working. A hard…
