Wyniki wyszukiwania: mcr

"The Expanse" MCRN Gun

MCRN Scirocco Class Assault Cruiser from The Expanse

MCRN Scirocco Class Assault Cruiser from The Expanse. It measures about 495mm from the tail to the tip of forward antenna. Almost all the pieces were printed not using supports. I used supports on three of the mid-section structures. The…

Expanse MCRN Marine Space Helmet (remix )

Hi Darren, I've sliced it up as best I could to a possible print. Please check that sizing suits your needs also. I'm not even sure you could wear it because the neck seams small and may need to be in seperate pieces to fit on your head.…

Wall mounted brackets for the MCRN ships

I did not intent originaly to publish those, but I was asked to do so. Here we have a wall mounted brackets for the MCRN ships: Morrigan Class Corvette Class Orion Class All three are designed to be mounted directly to the wall with 3…

MMC Gun prop (The Expanse) (MCRN)

Follow me so you don't miss my next models from The Expanse Update : I modified two files ("Fire selector" and "safety 2of2" because on FDM printers it was too complicated to reproduce the small details. So I'm making available an FDM…

Amcrest Wall Mount Bracket for Dome Cameras

The is a wall mount bracket designed to serve in place of the Amcrest AMCPFB203W, tested with Amcrest IP5M-T1179EB-28MM (the model of camera I have). The cavity inside is large enough to fit the ethernet connector and the camera's…

Model of Marcel Duchamp's Fountain by williamCromar

This model is one of the collection Prêt à Faire: Printable Readymade Models. Prêt à Faire is an autonomous artistic project, scholarly reference work, and institutional critique by williamCromar , supported by a faculty grant from Penn…

MCRN Dropship from The Expanse

The Dropship was printed on a Prusa MK3S+, 10% infill, 0.15mm, no supports. The model measures around 188mm.

McRideline rev1

To find out about this tool and the project then go to it's homepage on my website https://www.barras-blades.com/mcrideline If you want to contribute to the project or ask questions then join the facebook group…

Steamcrave replacement battery door insulator

After I dropped my titan the first time I tried to look for a replacement battery door but you need to buy the entire mod again, which I did the first time. Then came 3D printing in my life. Fun as hell! But of course, my precious new mod…

KTM 690 SMCR screw cap/ Schraubenabdeckung

They are made with such small tolerances that they should just stay on, but incase they are a little bit loose, you could use a tiny bit of sticky tape to fix them into place. Mine hold without any tho. They are for 8mm hex bolts so they…

MCRN Scipio Africanus (The Expanse)

The MCRN Scipio Africanus is a Light Frigate equipped with dual torpedo tubes and twin PDC emplacments. The vessel was designed and built by the Martian Colonial Navy to serve as a escort, boarding craft or patrol vessel.

MCRN Donnager MMU for Prusa XL-5T

You can go a little bigger but 280% is a nice round number for about as big as you can print the Donny without extra splitting up of parts on the Prusa XL. Ends up ~38in/97cm long. IIRC it took took me almost a month to fiddle with things…

MCR logo

this is the my chemical romance logo!

Amcrest dome camera wall mount

Should work with many variations of amcrest cameras and maybe some from other vendors. My camera is an Amcrest IP5M-T1179EW-28MM.…

MCRN logo fridge magnet

I scaled up the original about 50% and added holes for three 8x3mm magnets. Print the base in black and change to white filament at Layer 34. I recommend enabling ironing for all top surfaces. The red dot needs a dab of glue to hold in…

KTM SMCR 690 Stopfen Fussrastenhalter

Ich habe für die KTM SMCR 690 BJ. 2019 Stopfen für die Fußrastenhalterung entworfen. Die Stopfen gehen sehr schwer rein, am besten mit Silikonspray eindrücken. Material: TPU Fülldichte: 100%

the expanse MCRN logo

Modeled after the uniform version of the logo. Enjoy. Print Settings Printer Brand: Prusa Printer: Prusa Mk2 Rafts: No Supports: No Resolution: 0.2 Infill: 20% Notes: I used the prusa color changer tool to stop at 4.3mm and change to a…

Separate MCRN logo for the legendary morrigan Class from Martin

Due to the slant, the MCRN logo did not look so nice as a multi-colour print, so I decided to extract the logo and glue it separately onto the component. Attention: before printing, the individual parts must be laid flat on the print bed…

Desktop case for HP MCR22IN1 22-in-1 card reader

From an old HP/Compaq computer, I rescued a card-reader normally mounted in a 2.5" drive bay. I designed a case for it that uses the original screws to hold it in. The back is completely closed and the cable, which has a 2x5 JTAG Header…

KTM SMCR 690 Stopfen Kuehlerhalter

Ich habe für die entworfen. Stopfen Oben und Unten unterscheiden sich in der Tiefe. Die Stopfen gehen sehr schwer rein, am besten mit Silikonspray eindrücken. Material: TPU Fülldichte: 100%

Amcrest Turret IP Camera Wall Mount Baseplate

Amcrest Turret IP Camera Wall Mount Baseplate - to hide and secure cables Specifically made for Amcrest Turret IP Camera Model# IP5M-T1277EW-AI This is a wall mount baseplate that allows you to use longer screws and hide all the cable…

Mars Flag (MCR from The Expanse)

Fans of The Expanse, show off your Martian Pride with this flag for the MCR (Mars Congressional Republic) Print instructions I designed it to be printed in 4 layers. The bottom layer is 2mm high, in red. Then the remaining layers are each…

McRib patty Mold

I used PETG for this since this would need to be washed after contacting raw meat. It is recommended to use saran wrap also covering all surfaces. It worked well!

Motec MCR4-ULTIMATE

Motec MCR4-ULTIMATE

Wisycom mcr54 + powerbank holder

A holder for the Wisycom receiver MRC54 and a Pilot x7 power bank

Amcrest Dome Camera Mounts

These are mounts for Amcrest's dome camera. One for mounting in a corner and one for mounting on a rain gutter. The hole in the corner mount is for the cable to pass through so the camera can be mounted over the wall where the cable…

Amcrest ASH21 Zip Tie Mount

This mount enables the Amcrest ASH21-B and ASH21-W cameras to be mounted to a support with a zip tie. The model is parametric and can be customized for use with different-sized zip ties or other items, such as straps, string, etc.

Model of Marcel Duchamp's Bicycle Wheel by williamCromar

This open-access, reference-scale model is part of the broader project framework of Prêt à Faire: Printable Readymade Models . To explore the premium, full-scale editions operating under a distinct commercial framework as part of this…

MCR Danger Days/Killjoys Ornament

It was designed to print multi-material or with filament changes, so that's my recommendation. An ornament based on the cover art for My Chemical Romance's album Danger Days and the Fabulous Killjoys symbol. I designed this for day 21 of…

Tate McRae Jersey, T8

This is a project for the community and for Tate fans to print. Please do not sell it.

Amcrest PTZ Camera Foot

This is a simple adapter for the Amcrest ip4m-1041b PTZ camera to use in the mount included with the camera as a stand. This may fit other Cameras that use a similar mount.

Adapted Front with Torpedo Tubes - MCRN Morrigan class

With four short little wire parts you can make the torpedo covers work fine and have the morrigan class with two torpedo tubes. I even fixed the part to connect parts xxx_-_morrigan10 and xxx_-_morrigan15 better but still holding really…

Amcrest AD410 anti thief cover (15 degrees)

I created a cover for my Amcrest Ad410 doorbell to make it harder to steal. It is made for 15 degree mount, and I think it can be mirrored to face the other side if needed.

Amcrest Wall Mount Adapter

I received an IP8M-DLB2998EW-AI dual lens security camera from Amcrest to test and developed a love-hate relationship with it. It is a decent camera but (1) it is designed to be mounted directly to a wall, and (2) there is no place inside…

Motec MCR3 Hyper Mesh

Motec MCR3 Hyper Mesh

BiOrb Aquarium MCR Light Remote Control Holder

Somewhere to keep your BiOrb MRC light control safe. Also has a recess for a feeding funnel… https://www.printables.com/model/709543-feeding-funnels-for-biorb-aquariums Locations on the base for 8mm rubber feet.

McRibby McRib Patty Press Mold McDonalds Tribute

McRibby McRib Patty Press Mold McDonalds Tribute. Custom designed and 3D printed three part mold for making your own McRibs at Home. Instructions for use and cleaning will be include. 100% custom design.

Amcrest Turret IP Camera Angled Base

Amcrest Turret IP Camera Angled Base Specifically made for an Amcrest Turret IP Camera Model# IP5M-T1277EW-AI Recommended Print Settings: 0.4mm nozzle 0.2mm layer height 3 perimeters minimum

Stormcrow Prime, AKA Ryoken for Battletech | Syllogy

Stormcrow Prime, AKA Ryoken for Battletech This is one of my classic free miniature releases, originally shared on MyMiniFactory. I am bringing the original files to Printables for hobbyists to print, paint, and enjoy. Included files •…

Caddy for Amcrest 1080p (ASH21-B-V3) Camera

A cup to hold the Amcrest 1080p (ASH21) camera with adjustable pitch. A solution for aiming the camera down (over a ledge) without the need to mount it on a veritcal surface. Legs can be assembled with feet inward or outward – depending…

DtM FaceShield Variant for MCR Shield

A group member has 181540 and 181560 face shields from MCR Shield, but no band to attach them to for Covid-19 donations to the NHS. This variant of the very nice DtMv3 design extends the shield mount and provides a pin layout that might…

Amcrest Dome Camera Mount

This mount is a mix of multiple models: The mount point is Articulating “Raspberry Pi Camera Mount”. The Wall Mount portion Im using is the "Wall Mount for camera flex arm". The connector is a ""Snap in pipe clamp" Im not going to pretend…

MCRN Corvette Class - Torpedo Bays below

You can never have enough Torpedo Bays, so here are 2 more on the Belly of this awesome Corvette. Thanks to the original model, it just needed a little work. Have fun!

Model of Marcel Duchamp's Bottle Rack by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . To explore the premium, full-scale editions operating under a distinct commercial license framework as part of this broader marketplace…

Model of Marcel Duchamp's Porte-chapeau (Hat Rack) by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . To explore the non-textured advanced geometric variants operating under a distinct commercial framework as part of this broader…

Amcrest Camera Pole Mount

A customer commissioned me to figure out a way to mount these cameras to a pole outside. This is what I came up with. Use a hose clamp and 3 screws to mount the Amcrest IP2M-852EB to a pipe. Print in PETG or ABS for outdoors.

Amcrest ASH21 Tripod Adapter

I printed at 100% infill for the extra strength, but you can print with less.

MCRN Railguns for Donny and Scirocco Class

I really love Martin's Models and love to fix a few small things. The Railguns are impressive in the Show, so I wanted them to lift the Guns up like in the Show. I scaled them up a little, but they print fine in nearly every size. They…

Remix of Martin's MCRN Donnager

This is a remix of Martin's MCRN Donnager printed on the U1.

McRibbs the Toad

Scan of a plushy toad I purchased at a thrift store.

Colin McRae Rally - PS1 Disk - HueForge

For all the nostalgic people (like me), I created a copy of the Colin McRae Rally Playstation 1 disc with HueForge! If you want to resize the print, do not modify the Z axis, otherwise the filament changes will be altered and the print…

Model of Marcel Duchamp's Peigne (Comb) by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . To explore the untextured, advanced geometric variants operating under a distinct commercial framework as part of this broader…

CommCrate

This is a proof of concept for a modular emergency communications (EMCOMM) go-kit. The goal of this project is to make a kit that can have equipment swapped out easily without having to fabricate a new top panel. New modules can easily be…

Sectional beam and retaining pegs for a Loomcraft Sabina jackloom.

5 sectional beam pegs and 3 retaining pegs for a Loomcraft Sabina jackloom. I've included stabilizing rings just in case there's any adhesion or light bumping issues. Category: Parts

Model of Marcel Duchamp's 50cc of Paris Air by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . As a small object, this model needs no deluxe full-scale version, but to explore full-scale geometric variations or untextured component…

Model of Marcel Duchamp's In Advance of the Broken Arm by williamCromar

This open-access reference model is one in the collection Prêt à Faire: Printable Readymade Models . To explore the full-scale deluxe editions or the untextured multi-body files operating under a separate commercial license framework as…

Model of Marcel Duchamp's Trebuchet (Trap) by williamCromar

This open-access reference model is one in the collection Prêt à Faire: Printable Readymade Models . To explore the untextured, advanced geometric variants operating under a separate commercial license framework as part of this broader…

Model of Marcel Duchamp's Apolinère Enameled by williamCromar (Impossible Bed Edition)

This open-access reference model is one in the collection Prêt à Faire: Printable Readymade Models . To explore full-scale geometric variations or untextured component archives operating under a separate commercial license framework as…

PiCamMCR - Arducam/Waveshare/Raspberry Pi camera (with lens) Case

Rapsberry Pi picamera micro case. Designed to be mountable on flat surface or using self adhesive tape on smooth surface ie window. Best printed on ASA although my builds are on PLA for the test. The files: ✅ Front ✅ Gasket ✅ Rear ❌ No…

Adapter Base for Amcrest IP2M-844E PoE Camera

Adapts an Amcrest PoE IP2M-844E camera to a standard camera tripod base mount. Instructions: Print the part Glue Home Depot part 801934 (1/4". - 20 tpi x 13 mm Zinc-Plated Steel Type-A Insert Nut) into the base. Attach the base of the…

Model of Marcel Duchamp's Fresh Widow by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . To explore the full-scale deluxe edition operating under a distinct commercial license framework as part of this broader marketplace…

ENV MCRO Enclosure

Ran a project teaching Year 8 pupils how to create and program their own macro-pads using the ENV MCRO by Envious Data . While they created their own enclosure I wanted to thank another member of staff for helping with a previous project…

Model of Marcel Duchamp's Why Not Sneeze, Rose Sélavy? by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . As a small object, this model is full-scale with no premium alternative. However, to explore full-scale deluxe editions or alternative…

Amcrest IP8M-T2599EW-AI-V3 - Tiltable Mount

Didn't want to screw the camera into my wall and didn't find an existing mount, so I made one! Fits the listed model but may work for others, see pic for roughly sketched measurements. Will list them below as well, these are for the mount…

Model of Marcel Duchamp's With Hidden Noise by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . As a small object already at full-scale, there is no premium version available, but to explore full-scale geometric variations or…

Models of Marcel Duchamp's L.H.O.O.Q. by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . To explore the deep-dive technical documentation detailing our color separation algorithms operating under a separate commercial license…

Model of Marcel Duchamp's Traveler's Folding Item by williamCromar

This open-access reference model is one of the collection Prêt à Faire: Printable Readymade Models . To explore the advanced, 1:1 full-scale deluxe edition operating under a separate commercial license framework as part of this broader…

mcr necklace charm

my heart i loved her ahhhhh

Keys for the smoke extraction button mcr RPO-1

Keys for the smoke extraction button mcr RPO-1 mercor proof

PiCamMCR - Arducam/Waveshare/Raspberry Pi camera (with lens) Case

Rapsberry Pi picamera micro case. Designed to be mountable on flat surface or using self adhesive tape on smooth surface ie window. Best printed on ASA although my builds are on PLA for the test. The files: ✅ Front ✅ Gasket ✅ Rear ❌ No…

CommCrate

This is a proof of concept for a modular emergency communications (EMCOMM) go-kit. The goal of this project is to make a kit that can have equipment swapped out easily without having to fabricate a new top panel. New modules can easily be…

Remix of Martin's MCRN Donnager

This is a remix of Martin's MCRN Donnager printed on the U1.

McRib patty Mold

I used PETG for this since this would need to be washed after contacting raw meat. It is recommended to use saran wrap also covering all surfaces. It worked well!

BiOrb Aquarium MCR Light Remote Control Holder

Somewhere to keep your BiOrb MRC light control safe. Also has a recess for a feeding funnel… https://www.printables.com/model/709543-feeding-funnels-for-biorb-aquariums Locations on the base for 8mm rubber feet.

Amcrest Camera Mount (AMCPFB203W) for PBR Metal Panel

This is an Adapter for the Amcrest Camera mount “https://a.co/d/c3fcZJq” The type of Roof / Metal Panel I am modeling from is “PBR” I have a link on my profile. I made one that will go on the left side of the piler and the other on the…

Amcrest Mount, 30 degree angle for shelf

Amcrest mount for IP5M-T1179EB to angle it on top of my kitchen cabinets, tired of wyze cameras so needed a solution where this wasnt mounted to the ceiling until we do a remodel of the room. Previously I did this in a 20 degree tilt, I…

Amcrest ProHD Angled Stand

This was designed and printed so that my Amcrest ProHD PTZ camera could look out a 2nd story window and look down enough to see everything. I uploaded two versions one has roughly a 17degree pitch (CameraShim_17d.STL) the other I think…

Thaumcraft Things!

Based on the spectacular mod Thaumcraft, by Azanor. In particular, version 4. All of these are extremely rough models, as I'm still learning how to do this. I'll update it whenever I get the chance. Perfectly happy to hear from you -…

MCR logo

old MAC pics don't work right

Ronald McRedguard of Oblivion

Ronald McRedguard of Oblivion

E3NG: Amcrest AWC195-B camera mount

This model allows you to mount the camera in the corner. It's not the best option (camera doesn't have wide lens) but fits the idea of reusing spare parts you have to build the Ender 3ng :^) OpenSCAD included in case you want to rework it…

Model of Marcel Duchamp's Bottle Rack by williamCromar: Full Scale Edition

This digital asset is a refined, full-scale manifestation developed as part of an instructional research initiative supported by a faculty grant from Penn State Abington and the Abington MakerSpace . It expands upon the geometric…

Model of Marcel Duchamp's In Advance of the Broken Arm by williamCromar: Full Scale Edition

This digital asset is a refined, full-scale manifestation developed as part of an instructional research initiative supported by a faculty grant from Penn State Abington and the Abington MakerSpace . It expands upon the geometric…

Model of Marcel Duchamp's Traveler's Folding Item by williamCromar: Full Scale Edition

This digital asset is a refined, full-scale manifestation developed as part of an instructional research initiative supported by a faculty grant from Penn State Abington and the Abington MakerSpace . It expands upon the geometric…

Models of Marcel Duchamp's Readymades by williamCromar: Experimental Texture Editions

This premium component set features advanced geometric variations expanding upon the open-access reference collection Prêt à Faire: Printable Readymade Models . Accessible under a distinct commercial framework, these deluxe file…

Model of Marcel Duchamp's Fountain by williamCromar: Refined Full Scale Plating

This digital asset is a refined, full-scale manifestation developed as part of an instructional research initiative supported by a faculty grant from Penn State Abington and the Abington MakerSpace . It expands upon the geometric…

Models of Marcel Duchamp's L.H.O.O.Q. by williamCromar: Color Separation Deep-Dive

This premium component set features advanced developmental variations expanding upon the open-access reference collection Prêt à Faire: Printable Readymade Models . Accessible under a distinct commercial framework, these deluxe file…

McRideline stone holder

This is to compliment the McRideline https://www.printables.com/model/232029-mcrideline-rev1 https://www.facebook.com/groups/300844522177068 A holder so that a 25 x 148mm ruby stone can be mounted in the frame On the other side of the…

McRideline 2 stone holder

A stone holder for the McRidelne that will take 2 different D-shaped 25mm stones It is designed for M5 inserts and M5x16mm End pieces will need a minor fettling to get them to fit the stones

McRideline round stone holder

Two end caps to allow a 25mm round stone to be mounted in the McRideline The end caps are a push fit over the stone so may need some fettling to get a good fit

Pumpkin McRibbon

Less than 5m of filament to print the solid ribbons, stem, caps, and tealight holder!!! Ribbons slide into the side opposite the nub in the caps. Check out my other vase mode pumpkin WHOSE EYES FOLLOW YOU!…

Amcrest AD110 Smart Doorbell Mounting Bracket

Introduction I made this bracket because the spot on my door where the doorbell was is uneven. I have included 2 versions, one with a standoff to the right (mirror if your doorbell is on the left) and one that's flat if you would like to…

Amcrest Camera outlet mount

For Amcrest monitoring camera. You can print the pieces separately and join and adjust with a screw. The reel can accommodate a cord up to 6 feet in length. No support required.

Amcrest AD410 doorbell angled mount for 4.5" vinyl siding

Fits unknown-brand 4.5" vinyl siding. Two parts are available: One uses two rectangular pins for alignment and requires gluing. The other is a single unit, but requires supports. Update Made pins symmetrical, so angle can be reversed

Boomcrete - PLA/PETG version

While working on a concrete BT/Wifi 2.1 speaker for some years (source for name Boomcrete), I decided to get a working one in PETG/PLA for this season. The box was designed to work without power plug (e.g. Makita Battery). A version…

Amcrest ad410 Doorbell Mount-Left-45

Here is a Amcrest ad410 Video Doorbell 45 Degree(Left) Mount. I found other mounts but only for the Amcrest ad110. Print with PETG and 50% infill. Enjoy!

Pumpkin McRibbon Stem REMIX

Created a much lower profile stem to fit on the great model by Lothar: McRibbon pumpkin