Wyniki wyszukiwania: aftermarket

Sortowanie

100 modeli

P
PrintablesJeffL

Prusa Mini Base PSU 174mm old style AFTERMARKET PSU

I had to replace my power supply for my Prusa MINI and this print is for the aftermarket version that has different plug and wire positions. no support is required.

Wydruk około 3,86 €–4,72 € nettoWstępna wycena dla PETGMateriał u źródła: PET

Pobrania
31
Polubienia
3
Ocena
0

Thumper's Aftermarket Shop

Optional parts for Thumper (Click on files to see visual 3D files) Narrow wheels fit trailers. Wide wheels technically fit. beware of oversizing. STL files have a Prefix letter. All parts for each set are marked with the same prefix…

Pobrania
1432
Polubienia
200
Ocena
5
P
PrintablesWingWong

Flash Forge Adventure 5M Cooling Fan Duct Compatiable With Aftermarket Hotend

ALIX NOZZLE DUCT CONFLICTS WITH STOCK BUILD PLATE HANDLE. IF YOU WANT TO USE IT PLEASE REMOVE THE HANDLE. Fan goes into the same spot as the original model. Screws seemed unnecessary since the friction fit is already pretty good. Make…

Pobrania
870
Polubienia
109
Ocena
5
P
Printableschiz

Bambu Lab X1/X1C Fan Shroud (stock, aftermarket nozzle or with LED)

This is fan shroud modeled according to the stock shroud on the X1/X1C. You have the following options on which shroud to print: A. Stock Configuration This is the version you need to download if you're replacing a broken stock fan…

Pobrania
589
Polubienia
178
Ocena
5
P
PrintablesKurtis Saiyo

E46 BMW Front Aftermarket Speaker Adapteter

I wanted the “stock look” and the mounting schemes provided by the manufacturer of the aftermarket speaker did not fit the tri-lobe stock mounting scheme and I did not want to drill permanent holes in my door. This was designed for the…

Pobrania
576
Polubienia
63
Ocena
0

Morrigan Aftermarket parts by Black Cow

Morrigan's Aftermarket parts: Prefix part numbers. Example : All parts starting with A will be Wide Wheels A- 46mm Wide Wheels for 60mm wide AG tires. (over all makes model 14mm wider) 3mm inward and 7mm outward from original wheels.…

Pobrania
354
Polubienia
64
Ocena
5
P
PrintablesGilliGainz

FlashForge AD5M Lightweight Duct for Aftermarket Hotend

This one is made to work with the aftermarket Aliexpress/Amazon hot end. Make sure you take of the plastic handle on the build plate as the longer ducts will hit it. Modeled for 5x3mm magnets. Designed to use heat inserts and bolts to…

Pobrania
311
Polubienia
64
Ocena
3,67
P
PrintablesGilliGainz

AD5M Aftermarket Hotend Adapter

Still a work in progress, it seems to fit up nicely. Uploading for people to tinker with. EDIT: I have changed the design to integrate with the black clip section. It works well so I've ordered it to be SLS printed from metal and will…

Pobrania
218
Polubienia
48
Ocena
0
P
PrintablesDonkeysCap

Nissan Stagea Aftermarket 6.5" Speaker Bracket

Speaker bracket to replace the factory front speakers in a Nissan Stagea. This model has been designed to accommodate JL Audio C1-650 component speakers; with 2 options for mounting, but should fit any 6.5 inch speakers. 2 Versions are…

Pobrania
207
Polubienia
23
Ocena
5
P
PrintablesPlaethe

Cupholder & USB Holder for aftermarket center console - Rifter, Berlingo, Combo, Proace, Combo 2018

Designed specifically for the PSA Berlingo (K9) model's aftermarket center console. Manufactured using ABS to withstand varying weather and heat conditions. Features a movable cupholder and an integrated USB cable holder.

Pobrania
151
Polubienia
17
Ocena
0
P
PrintablesGruthius

Nissan Leaf Aftermarket speaker adapter

This is a remix of gunnarholm's design over on thingiverse. Its designed to replace the existing Nissan Leaf speakers with aftermarket 6 ½" drivers. I split this one in two so it would fit on my prusa mini and it prints with no supports…

Pobrania
141
Polubienia
24
Ocena
5
P
PrintablesRuben Hauwaerts

Mounting plate for aftermarket ESC (TRAXXAS SLASH LCG CHASIS)

I made a mounting plate for an aftermarket ESC, that will only work with the traxxas lcg chasis. Parts list: screws: M3 X 8mm the plate itself an aftermarket ESC double sided tape If you want you can add a zip tie aswell to make it even…

Pobrania
121
Polubienia
30
Ocena
4,5
P
PrintablesHemento

GBA Cartridge Storage Tray for Aftermarket Game Cases

I really like the design of the GameBoy Cartridge Storage Tray for OEM Cases by @BlueShell3D and because I wanted a GBA counterpart in the same style for the aftermarket game cases, I designed one myself. It has the same footprint as…

Pobrania
103
Polubienia
9
Ocena
0
P
PrintablespHeneX

Audi A4 A5 B9 aftermarket tweeter plate

This is an plate to fit aftermarket tweeters (ETON POW 200.2 etc) into the dashboard of an Audi A4/A5 B9. Might fit as well into the Q5 (FY) but i didn't test this. Print in ASA/ABS/PETG 20% infill

Pobrania
93
Polubienia
4
Ocena
5
P
PrintablesPPat

Rock Solid BMG+CHC Pro+CRTouch/BLTouch Hotend Mount Ender 3/V2/Neo Aftermarket Direct Mount Plate

So my problem was that BMG clones didn't grip the heatsink hard enough and the whole thing sways side to side with the slightest touch to blobs or overextrusions and I wanted to stop that, so I designed this to be super rigid and it has…

Pobrania
89
Polubienia
14
Ocena
0
P
PrintablesSnadrews

Subaru Forester SJ 2013-2014 Premium Fascia Adapter to 2DIN Aftermarket Radio

Struggled to a find a commercially available fascia to adapt a 2DIN Sony XAV-AX1000 to suit a Subaru Forester SJ 2013-2014 with the Harmon Kardon headunit. This one does fit these exact models, unsure if it would fit other models or…

Pobrania
89
Polubienia
10
Ocena
0
P
PrintablesChris

AX24 - Shortened Aftermarket Servo Mount - Remixed

AX24 - Shortened Aftermarket Servo Mount - Remix Shortened Aftermarket Servo Mounts for the Axial AX24. A couple of mm was trimmed off of the front of the original, moving the servo closer to the center of the vehicle, which seemed to…

Pobrania
85
Polubienia
18
Ocena
0
P
PrintablesZac Trigg

Dyson V7 Holder Aftermarket battery

Dyson V7 Holder for standalone holder

Pobrania
80
Polubienia
12
Ocena
0
P
PrintablesCapra-Audio

Sennheiser Aftermarket Connectors

Instructions here: https://github.com/CapraAudio/SennheiserAftermarketConnectors/new/main?readme=1 Additional Affiliate Links if you want to support us further: Polymaker 95a TPU Polymaker PLA Pro Polymaker PETG

Pobrania
73
Polubienia
19
Ocena
0

Aftermarket speaker adapters/mounting plates for p2 Volvos

simple adapter plates for fitting aftermarket off the shelf speakers in your p2 Volvos. These should fit all cars no matter the original spec speakers, 100% fits the in the lower end paper cone s60 speaker spot. The JL audio c1 650x and…

Pobrania
64
Polubienia
6
Ocena
0
P
Printablesstevehlau

Original Prusa i3 MK2S Extruder Remixed (fits aftermarket probe)

Remixed from the Original Prusa i3 MK2S. This extruder body can fit a longer 8 mm aftermarket inductive sensor instead of PINDA. I made it to have enough clearance to fit a longer sensor in its original location. Please noted that the one…

Pobrania
62
Polubienia
5
Ocena
0
P
PrintablesPaz Lev Eytan

Traxxas XRT Aftermarket Wing

Design Concept The RC Car Aftermarket Wing is designed to enhance the aerodynamics and visual appeal of your RC car. Its aggressive design ensures optimal downforce and stability while adding a unique touch to your model. Purpose This…

Pobrania
61
Polubienia
8
Ocena
0
P
PrintablesBillnis

Aftermarket Steering Wheel Radio Control Mount for 1st Gen Toyota Tacoma

Really happy with how this turned out. Short of replacing the whole steering wheel this is the best alternative I could come up with. I find that not having to reach for my phone or reach for the stereo display to answer a call is crucial…

Pobrania
58
Polubienia
7
Ocena
0
P
PrintablesCrafter64

Goldwing aftermarket wind deflector

WORK IN PROGRESS Upper wind deflector aftermarket part for Goldwing Motorcycle. Logo model thrown in for fun. Print from PETG to better withstand the outdoors. Category: Replacement Parts

Pobrania
58
Polubienia
6
Ocena
0
P
PrintablesFlyboyEUC

Begode Master Bracket for aftermarket headlight

This bracket is intended to be used with the Clarkpads faring for the Master and the headlight located here: https://www.amazon.com/gp/aw/d/B07FDVJTLX?psc=1&ref=ppx_pop_mob_b_asin_title Must be printed in TPU as the bracket will need to…

Pobrania
58
Polubienia
4
Ocena
0
P
PrintablesAndrei Pascal

Motorola TLKR T80 strong aftermarket clip

After many years the original clip broken

Pobrania
58
Polubienia
6
Ocena
5
P
PrintablesDexMoto

Aftermarket PC controller buttons (for DualShock 3, DualShock 4 - knockoff / xbox pc layout)

This buttons are for Aftermarket PC controllers - that are knockoffs of DualShock 3/4, i recently got a pair of them for my couch co-op pc. As a pc gamer i`m not used to console button layouts so i made a this remix of DualShock 3 buttons…

Pobrania
54
Polubienia
2
Ocena
0
P
PrintablesLiP

Tonies box charging base for (replacement/aftermarket) barrel jack supply

Since we needed something lightweight to travel and charge the Tonies Box via a USB-C 9V to Barrel Jack adapter I created this simple shape to route the cable through and attach it with a litte hot glue. Super glue should work fine as well.

Pobrania
50
Polubienia
11
Ocena
0
P
Printablesbrunofresco

Mitsubishi Lancer / ASX / Outlander Aftermarket Microphone Adapter

I made this Microphone adapter for my Lancer because i really wanted to have the microphone at the original location for my aftermarket head unit in my case its for pioneer but most microphones you can buy on ebay are made the same way...…

Pobrania
46
Polubienia
15
Ocena
0
P
PrintablesMatthew Fochs

1st Gen MINI Cooper Rear Headlight Level Sensor Bracket for Aftermarket Control Arms

The 1st gen MINI Coopers use a folded steel control arm design and the light-level sensor in the rear left of the car is connected to the lower control arm via a bolted-on bracket. If replacing the control arms (for adjustable aftermarket…

Pobrania
44
Polubienia
4
Ocena
0
P
PrintablesKiwi Tinkerer

Aftermarket Gallagher Fence Reel Planetary Gearbox

Replacement parts for Gallagher fencing reels are expensive and you need to buy a whole set to replace parts even when its just one part missing or broken. So I redesigned the gearbox to be 3D printed to solve this. You will need to print…

Pobrania
43
Polubienia
10
Ocena
0
P
Printableshalo

EG/EK Civic Aftermarket Wheel Cruise Control Bracket

Use this bracket to mount your cruise controls to a quick-release steering wheel. I used a curly phone cable and cut a phone coupler in half to carry the wires between the harness and control module. Designed to fit an NRG 3-spoke.…

Pobrania
42
Polubienia
5
Ocena
0
P
PrintablesMxngø

aftermarket steering wheel control adapter

Remix of link below. The first photo is inspo for this creation, the second is how it came out in my car. I made this for my 350z I'm sure it will work for most other cars as the bolt pattern is universal for most aftermarket steering…

Pobrania
42
Polubienia
2
Ocena
0
P
PrintablesFranck G

DJI Goggles 2 Battery Holder AfterMarket Strap

Modification du superbe et très pratique Battery Holder de Saurabh Srivastava ( https://www.thingiverse.com/thing:5764236 ), adapté pour un strap plus large (exemple strap PiratFrames ...) Modification of the magnificent & very efficient…

Pobrania
42
Polubienia
3
Ocena
0
P
PrintablesSchlotte

Grado Removable Cable Mod For Aftermarket Gimbals

Remix of Smolzilla Makes “Grado 3D Print Removable Cable Mod” Please follow his excelent step-by-step assembly guide. I had to remix the existing mod to fit my aftermarket aluminum gimbals, now you don't have to cut parts of off the…

Pobrania
40
Polubienia
7
Ocena
0
P
Printablestrixt

Flashforge 5M Pro Nozzle Side Mount (aftermarket hotends)

My model offers 2 holes for Aliexpress hotends, 1 hole for stock, 1 hole for Conch. Of course stock fits any hole from this range, but may wobble too much. Also I made the embossed texts more shallow. Better split the model to print…

Pobrania
38
Polubienia
6
Ocena
0
P
PrintablesDragonsHoard

PS1 Lid Switch Extension For Aftermarket Shells

Having problems with the lid switch not engaging on your PS1? This may help. Print it out and add to the lid switch for some extra length to help engage the switch. This is meant to be a friction fit. If it does not fit yours just scale…

Pobrania
36
Polubienia
5
Ocena
0
P
PrintablesRabidGummyBear

Simple watch charging stand for aftermarket Samung watch chargers

I discovered most models for charging stands for the Samsung watch use the factory charger. I bought some cheaper knock-off chargers on Amazon. They were too big to fit every other model I found. The factory Samsung charger is about 34X9…

Pobrania
35
Polubienia
2
Ocena
0
P
PrintablesLisbone50

Nolan N91 Helmet Aftermarket Comms mount

I needed a mountable surface for my Nolan N91 Helmet. So this is designed to fit the factory comms place but support cheap Chinese Bluetooth headsets. Printed white PLA to match the helmet. Works well with this one and similar ones:…

Pobrania
33
Polubienia
5
Ocena
0
P
PrintablesRhiz0Matics

Qidi Plus 4 aftermarket camera mount (only works with lid risers)

I didn't like the stock camera, so I removed it and replaced it with Creality 3d printing camera with NIGHT VISION, so that I can secretly spy on my printer with the lights off, and my wife won't know I'm watching prints in bed since all…

Pobrania
32
Polubienia
12
Ocena
0
P
PrintablesCarl Leiby

Aftermarket Turn Signal Adapter

Aftermarket LED turnsignals come with a 10mm threads. The fender on the Honda has a teardrop shaped hole. I print two of these to sandwich the teardrop hole.

Pobrania
32
Polubienia
3
Ocena
0
P

Tail Light Bracket for Aftermarket Talaria MX4

Mount this tail light to your MX4 https://a.co/d/5am4sAG

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesBlueShell3D

GBA Game tray for aftermarket cases WIP

This is a work progress. Only download if you want to beta it plz

Pobrania
31
Polubienia
3
Ocena
0
P
PrintablesRuben Hauwaerts

Traxxas Hoss aftermarket ESC mount

This Traxxas hoss aftermarket ESC mount enables you to mount nearly any ESC on you HOSS You will need hardware, double sided tape (for the esc, or hot glue) and a zip tie. To hold the bracket in place you will need 2 countersunk M3 X 6mm…

Pobrania
31
Polubienia
6
Ocena
0
P
PrintablesDaniele Salvo

Yamaha MT-07 directional arrow support for aftermarket license plate holder

The mount was created to accommodate the original arrow, with a recess to pass the cables without disconnecting the connector and a guide to be able to fix it with a nylon tie. If you want an angle different from the 25° that I used,…

Pobrania
30
Polubienia
5
Ocena
0
P
Printablesnguyenkvvn

End Plate for Aftermarket Toyota Supra Rear Wing Spoiler

A friend of mine asked for me to make him a replacement wing end-cap when his car did not come with one. I had initially asked the original vendor for pricing on a replacement end cap… and discovered that it was 60$ a piece, which we both…

Pobrania
27
Polubienia
2
Ocena
0

Lexus RX350 Mounting Plate for Aftermarket Back-Up Reversing Camera (Replaces Toyota part no. 86790)

Recently fit an android head unit to my 07 Lexus RX350 which did not work with the OEM reversing camera. The head unit manufacturer supplied an aftermarket camera however this did not interface with the OEM mounting hardware. This mount…

Pobrania
24
Polubienia
1
Ocena
0
P
PrintablesJWatty

Wheel Cap Ram 3500 Aftermarket Wheels

Inner Rim is 120.25mm, Easily resized for your needs. Outter rim cover is 126.9mm. Relief cuts make for a good friction fit. I printed in PETG and seems to be holding up perfect. PLA will distort in sun.

Pobrania
24
Polubienia
2
Ocena
0
P
PrintablesD-Day

Rivian-Aftermarket Frunk Tank Lid Collars

These collars can be used to adapt the Rivian frunk lid so you can continue to use it with the Rivian-Aftermarket 12 gallon frunk water tank. Print all models upside-down with build plate supports.

Pobrania
24
Polubienia
5
Ocena
0

FZ-09 Aftermarket Brake and Clutch Lever Insert

I bought a bike recently. One of the previous owners did not like the stock levers and replaced them with these $22 Ali Express ones (I dislike cheap aftermarket levers). The levers are fine but they came partially assembled from the most…

Pobrania
23
Polubienia
5
Ocena
0
P
Printablesgullygossner

Toyota Aftermarket Mic Support

I wanted to mount my aftermarket head unit microphone in the factory location so I designed this part. I removed the aftermarket mic from it's housing and place it within this bracket then placed the bracket in the factory location. The…

Pobrania
22
Polubienia
7
Ocena
0

Tray for aftermarket AD5M/AD5M Pro Nozzles

This is a nozzle tray for aftermarket AD5M nozzles, available on Amazon and other retailers (see the example picture). My nozzles have no external markings for identification, so I've labeled the slots on the top of the tray. I've created…

Pobrania
22
Polubienia
6
Ocena
0
P
PrintablesmoWerk

W639 Aftermarket Automatik Shift Knob Cap

In case you replaced your worn W639 automatic shift bag and knob for below pictured very cheap aftermarket on, here is a model of the cap to customize it. It prints in two parts to avoid supports. The two parts are joined by a key and do…

Pobrania
19
Polubienia
3
Ocena
0
P
PrintablesXypher2000

Quest 2 Aftermarket Head Strap Replacement

One of the straps for our head strap broke. I measured and designed and printed a replacement one and printed overnight. VR is back up and running normally.

Pobrania
19
Polubienia
4
Ocena
0
P
PrintablesMadBob

Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats

Royal Enfield Classic 500 Seat Spacers - For Aftermarket Seats (print 2 of each) 15x6 (rear) and 15x4.5 (front) 8mm hole The brackets are too wide and these bushes fill the gap. Fitting Notes: When fitting the rear seat leave all bolts…

Pobrania
19
Polubienia
0
Ocena
0
P
PrintablesJEO

GD-R14 Aftermarket Garage Remote Control Cover

This cover may fit other openers with this similar case. It does fit tight and may need a little carving and sanding to fit. Since the tabs are an overhang and I did not use supports they bowed down a little. I used a pocketknife to trim…

Pobrania
18
Polubienia
1
Ocena
0
P
PrintablesHunex

Flexi Cat - Aftermarket tail

The tail got messed up but you only noticed at the end of the print, and you don't want to print the whole thing again? * Print either the full tail or the last 3 segments. Cut off the messed up tail at the matching place. (Sand the cut…

Pobrania
18
Polubienia
6
Ocena
0
P
PrintablesSeth Ward

Ender 3 neo Direct Drive Mount (FOR AFTERMARKET DIRECT DRIVE KIT)

1. The rectangular hole- this is for the baseplate that came with the direct drive upgrade kit, if you no longer have the original baseplate or dont care to change it, this will enable it. 2. Moved the mount for the stepper/extruder 5 mm…

Pobrania
17
Polubienia
2
Ocena
0
P
PrintablesPalominotech

Edger trimmer finned hub adapter for aftermarket edger heads

This is a finned cooling hub to allow aftermarket edger attachment on cheap garden edger. I wanted to change the line spool to something more reliable. This was made for the Portland 3.8 Amp 13 in. Electric String Trimmer in mind, But…

Pobrania
17
Polubienia
0
Ocena
0
P
PrintablesPatrick

Mazda Miata Aftermarket intake support

Original one that came with the intake broke a long time ago. I needed something to keep my intake from falling off, so I made this. Recommend that you print it in ABS, but if you know of anything else that can survive engine bay temps…

Pobrania
16
Polubienia
3
Ocena
0
P
PrintablesXypher2000

Nest Doorbell Battery Aftermarket Mount Scalloped Siding Block

I created this because I bought a Google Nest Doorbell battery with no mounting hardware for cheap on eBay and a 3rd party mounting hardware that still needed the original mounting hardware to work. It was too long and skinny for the…

Pobrania
15
Polubienia
1
Ocena
0
P
Printablessurvival533

Oculus Quest 2 Headphone Adapter For Sony ZX110 and aftermarket Elite-like straps

Made a new adapter based on SolidRye's original design to fit Aliexpress elite-like headstraps like this one . It's supposed to fit on the thinner part in the middle of the strap's side. As such, the inner measurements are much smaller…

Pobrania
15
Polubienia
1
Ocena
0
P
PrintablesNick Marinho

Yamaha R9 Evotech tail tidy to suit aftermarket indicators

I made this quick model to suits aftermarket indicators for the R9 Evotech tail tidy that is made for the stock indicators, its just a simple adapter that suits all 8MM indicators. this might work on other models such as the Yamaha R7 and…

Pobrania
15
Polubienia
0
Ocena
5
P
PrintablesLaserBacon

Völund Forge REMIXED: K1 aftermarket SSR mount - big heatsink

Remixed version of KrzysztofGW's SSR v2 mount to accommodate the large HS-100A SSR heatsink sold on Amazon. It’s probably overkill but the SSR shouldn’t overheat™. the overall height of the heatsink will require modification of the bottom…

Pobrania
14
Polubienia
5
Ocena
0
P
PrintablesGoldenBoyGarage

Custom Yamaha XT225 Dash for Aftermarket Speedometer / RPM / USB port TW200?

About See what it looks like here: https://www.youtube.com/shorts/_z8Omeqew1A NOTE: YOU NEED TO BE COMFORTABLE WITH WIRING AND MODIFYING YOUR ELECTRICAL SYSTEM FOR THIS MOD. I AM NOT RESPONSIBLE IF IT GOES WRONG FOR YOU OR YOU RUIN YOUR…

Pobrania
13
Polubienia
1
Ocena
0
P
PrintablesNikita Ign

Haylou S30 (S35/S40 maybe) Aftermarket Earpad Ring Mount

My original "leather" earpads started disintegrating, so I got myself some of the custom aftermarket ones for like 6$ a set. I got the velvet ones and premium ones (leather + soft padding). They are extremely comfortable, but because of…

Pobrania
13
Polubienia
0
Ocena
0
P
PrintablesCharles Logston

Mirror Spacer Mount for 2019 Honda CBR650R aftermarket mirror

The aftermarket mirror for my 2019 CBR650R mirror mount does not quite fit in the factory location, so here is a 10mm spacer I created to make it fit. Could be scaled dimensionally in a slicer to fit different needs - raise more or less.…

Pobrania
12
Polubienia
0
Ocena
0
P
PrintablesFeloniousGoat

Polestar 2 And Volvo XC40 Aftermarket Speaker Adapters

This is a collection of adapters to install aftermarket speakers in 2021-2024 Polestar 2s. Also works for Volvo XC40 and other models using the same size speakers. Speakers: Front Tweeters - existing plates can be used Dash Speaker - 4" /…

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesEino

Subaru legacy 2003-2009 aftermarket speaker mount

Here is a continuation of the Subaru sound system upgrade. Here is an adapter for the front speakers and the rear speakers.

Pobrania
12
Polubienia
1
Ocena
0
P
PrintablesXypher2000

Quest 2 Aftermarket Headset Mount Point

Another part of the headset broke, so took measurements and I designed a replacement piece. It is designed after the left side, so mirror for right side.

Pobrania
10
Polubienia
2
Ocena
0
P
PrintablesOutback Joe

Jeep Gladiator Wheel Center Caps (Aftermarket Wheels)

These are center caps for my aftermarket 2022 Jeep Gladiator wheels. I made these to replace the cheap plastic caps that came with the wheels. The have the raised the text “RUBICON” centered on the caps. I printed mine with gold silk…

Pobrania
10
Polubienia
5
Ocena
0
P
Printableskamnxt

Sherman Max aftermarket headlight holder

A simple headlight holder for the Veteran Sherman/Sherman Max. My dad changed the headlight on his Shermax to this one ( https://www.aliexpress.com/item/1005006045365200.html ) and used this 3D printed adapter:…

Pobrania
10
Polubienia
1
Ocena
0
P
Printablespswayze

SLK R170 aftermarket headlight backing sleeve

These are backing for the R170 SLK Deco aftermarket headlights to replace the rubber membrain backing in case you need more room for something like LED headlights. Would recommend printing in ABS and then putting a screw through the print…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesOmi

Rear bumper extention for SCX24 - Allowed aftermarket rear bumper with Cherokee body on Jeep Gladiator SCX24

Rear bumper extention for SCX24 - Allowed aftermarket bumper with Cherokee body on Jeep Gladiator SCX24 Printed Overture PLA+ 100% infil for strength upright with plate supports. Part circled in RED in the provided photos. 2 needed.

Pobrania
9
Polubienia
2
Ocena
0
P
PrintablesTeeMuumi

Toyota 4Runner / Hilux Surf aftermarket speaker adapter brackets

These brackets can be used to install aftermarket speakers to a 4th gen Toyota 4Runner / Hilux Surf 2003-2009 (N210). The design is extra sturdy so that PLA can be considered as well. The brackets support standard size 6x9" and…

Pobrania
9
Polubienia
1
Ocena
0
P
PrintablesBIGBLOCKDOUG

john Deere 111 aftermarket fuel pump mount

needed a new fuel pump couldn't find original parts so made this to mount a aftermarket pump. Category: Hobby

Pobrania
9
Polubienia
1
Ocena
0
P
Printablesphillipfym

Lexus RCF 8" Factory to 8" Aftermarket speaker adapter plate

This is a custom-designed speaker adapter plate specifically engineered for the 2015–2025 Lexus RC F . While the factory front door speakers are technically 8-inch units, their proprietary mounting pattern and shallow housing make it…

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesBIGBLOCKDOUG

john Deere 111 aftermarket fuel pump mount

needed a new fuel pump couldn't find original parts so made this to mount a aftermarket pump. Category: Hobby

Pobrania
8
Polubienia
0
Ocena
0
P
PrintablesSchimmelsepp

Magnetic Tamper Station & Dosing Funnel for Create Espresso Machine (Aftermarket Portafilter)

🇩🇪 ☕ Temperstation & Magnetischer Funnel für Create Espressomaschine Diese Temperstation wurde speziell für eine Create Espressomaschine entwickelt und ist kompatibel mit Aftermarket-Siebträgern , Temper und Leveler . Sie sorgt für…

Pobrania
7
Polubienia
1
Ocena
0
P
Printablessanfordr

Aftermarket N46 Controller Joystick Extension

Joystick extension for an aftermarket wired Nintendo 64 controller. Print and push and twist to stick. The aftermarket controller has a soft top, so the interference of the top to the inside of the extension should be enough.

Pobrania
6
Polubienia
2
Ocena
0
P
Printablesmonkfe

Jaguar aftermarket antenna offset bracket

I made this to fit my XJS after replacing the factory antenna with the aftermarket one. The orginal mounting screws don't match up and I made this to make it more secure to the bottom. Uses M5 screws for the antenna. I used the original…

Pobrania
6
Polubienia
1
Ocena
0
P
Printableshudstr

CB500 Four Bracket for aftermarket combined Regulator/Rectifier

Modeled for 1972 Honda CB500k1 Four, might fit other year cb500's or cb550's, idk you'd have to check. No way endorsed by or claims to be original Honda part or design. Bracket that utilizes original mounting location and the weird bolt…

Pobrania
6
Polubienia
1
Ocena
0
P
Printablesac957

Aftermarket M1967-style Magazine Pouch buckle replacement

It was originally made for a third-party copy of the M1967 mag pouch. Print Settings The following print settings for ultimaker cura was used. Layer height: 0.12mm Infill : 100% Wall line and the others : Default profile settings…

Pobrania
6
Polubienia
2
Ocena
0
P
PrintablesToffeeCoffee3

Toniebox Aftermarket Barrel Jack Charger Dock (Friction Fit)

I obtained some Type C to 9V DC (5x2.1 mm) for use with the TonieBox 1. Due to the location of the charge port, a dock is required. I designed this dock with a removable (and customizable) collar that can friction fit into the dock base.…

Pobrania
6
Polubienia
0
Ocena
0

Mount for switches or buttons for an Aftermarket steering wheel

So this was styled for those mounts seen in the original fast and furious movies. this version of design was made to fit a Honda Integra DC5 with an HKB steering wheel hub, utilizing a 70mm x 6 PCB Whats needed M3 X 5 Heat set insert x5…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesBrian

Dodge Dart 2013 Aftermarket LED Puddle Light Adapter Bracket

This is an aftermarket LED puddle light adapter bracket for a 2013 Dodge Dart. It allows an aftermarket LED to be securely mounted in the factory puddle light opening, providing a replacement solution since the original manufacturer part…

Pobrania
5
Polubienia
1
Ocena
0
P
PrintablesGikote

Aftermarket Mega Missile Stretcher

Description : I got tired of not being able to use the 3rd party mega missiles I bought for blasters like the Demolisher 2-in-1 and Fortnite GL, because they were too tight around the post. To fix that, I created these stretchers to leave…

Pobrania
5
Polubienia
8
Ocena
0
P
Printablessuyo6774

Accord Euro/TSX (CL7/9) Aftermarket radiator brackets

Flush radiator mounts for an aftermarket radiator (in my case a Tegiwa radiator with a 34mm core iirc). ABS recommended at 100% infill just in case, needs supports and reuses the factory radiator bushing (or print a new one), the prop rod…

Pobrania
5
Polubienia
0
Ocena
0
P
PrintablesSeth Ward

Aftermarket creatily extruder ECAS04 ZIP TIE Mount for tradrack/MMU

Zip tie goes above the gears. You will probably want to use the other one I have, its this but remixed with a filament sensor

Pobrania
4
Polubienia
0
Ocena
0
P
Printablesmotey

Logitech G535 / G733 / G335 Loose Aftermarket Headband Fix

The Logitech G535 headset features a swappable headband, but many affordable (and even some pricier) aftermarket bands tend to fit loosely and slip off easily. This small part provides a simple, reliable solution to keep the band securely…

Pobrania
4
Polubienia
0
Ocena
0
P
Printablessevstep08

MMU3 Buffer (R4) for aftermarket FYSETC kit

I bought the aftermarket FYSETC MMU3 kit, works like a charm, but a few of the supplied parts are different from that of the official Prusa one! Notably, the couplers for the PTFE tubes supplied by FYSETC are quite a bit bigger than the…

Pobrania
4
Polubienia
6
Ocena
0
P
PrintablesSniperzown

Ninja 650 Aftermarket Bar End Spacer

A simple spacer designed to fill the gap left when installing aftermarket bar ends (like weights, mirrors, or protectors) that do not have the T-slotted end found on many OEM (Original Equipment Manufacturer) handlebars. This part ensures…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesThoro

USB extension cable holder for aftermarket car head unit installs.

TPU recommended heavily, comes with a small cap to cover the hole. Only tested on the Audi A3 8P, likely fits any car where you can screw this into. (and where the depth is not much off.) The USB extension cable needs to have specific…

Pobrania
3
Polubienia
1
Ocena
0
P
PrintablesNyíri Levente

Replacement joystick for Esperanza(aftermarket)/PS3 controllers

This is a joystick for aftermarket(Esperanza) controllers. I am not sure yet if this works in an original PS3 controller. I printed this with normal supports, it is quite hard to get off the supports, but its manageble. The upgraded one…

Pobrania
2
Polubienia
1
Ocena
0
P
PrintablesiDoWhatiWant

Miata aftermarket gauge cluster V2

This is Version 2 that prints as one piece Includes 4 spots for 2" (50.8mm) gauges (oil pressure, water temp, fuel, and volts) 2 spots for a 3 3/8" (86.725mm) Speedo and Tach Drill 4 small 7mm holes for blinkers, check engine light, and…

Pobrania
2
Polubienia
0
Ocena
0
P
PrintablesGE 3D

Garage Door Window Trim for aftermarket insulation

If requested I can upload the SCAD file if you need to make adjustments. 4 printable parts with dovetail joints on the backside of butt joints on the face. Plugs to fill the holes. Uses same hardware. Just print and replace after…

Pobrania
1
Polubienia
0
Ocena
0
P
PrintablesJEO

Ryobi 18V One+ Battery Repair with aftermarket BMS Board

Care should be taken working or modifying lithium cells. Ryobi batteries sometimes will refuse to work or charge and returns an error code light. A code has been rewritten on the BMS board that locks out the board from working. A hard…

Pobrania
0
Polubienia
0
Ocena
0
P
Printables

Ninja 650 Aftermarket Bar End Spacer

A simple spacer designed to fill the gap left when installing aftermarket bar ends (like weights, mirrors, or protectors) that do not have the T-slotted end found on many OEM (Original Equipment Manufacturer) handlebars. This part ensures…

P
Printables

Aftermarket M1967-style Magazine Pouch buckle replacement

It was originally made for a third-party copy of the M1967 mag pouch. Print Settings The following print settings for ultimaker cura was used. Layer height: 0.12mm Infill : 100% Wall line and the others : Default profile settings…

P
Printables

Thumper's Aftermarket Shop

Optional parts for Thumper (Click on files to see visual 3D files) Narrow wheels fit trailers. Wide wheels technically fit. beware of oversizing. STL files have a Prefix letter. All parts for each set are marked with the same prefix…