773 modeli
Note: For assembly instructions please follow the original post Version I: I initially pritned the Neo Thang cooler for the hot ended of my Ender 3 Max Neo. I however was wondering why both necks were so long. So I shorted both. This…
Wydruk około 7,99 €–9,77 € nettoWstępna wycena jednego wariantu
After I finished the Simple Perfect Desktop Fan Stand I wanted to make one that is adjustable. So here it is. Features No Supports / Super easy print The angle locks every 5 degrees Customizable text at the front No additional hardware…
Wydruk około 2,61 €–3,19 € nettoWstępna wycena jednego wariantu
I printed it in PETG with 40% gyroid infill and 4 perimeters and he “rubber interface” in TPU 95A with 2 perimeters and 20% infill. The rubber interface is a nice touch but definetely not required. If you have a round adhesive bumper pad…
Wydruk około 0,72 €–0,88 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I love the RTX 3080 Piggy Bank by Nils Kal! I decided to draw new fans that closely match the original 3080 fans. I included STL files, a 3mf file and a gcode file. Share a picture if you print one!
Wydruk około 3,03 €–3,70 € nettoWstępna wycena jednego wariantu
The Air Handler System - Fans and Grills - Wargame Terrain Deep within the bowls of all city-state Megalopolis, there are air handling systems. Systems that have been in place for a millennium and longer. At the deepest levels, these have…
Wydruk około 2,96 €–3,61 € nettoWstępna wycena jednego wariantu
This variation is exactly the same size as a standard 80mm fan to appear flush when mounted directly to fan. Low profile
Wydruk około 0,49 €–0,60 € nettoWstępna wycena jednego wariantu
UPDATE I adjusted the size of the frame to accommodate the Q-Pack MK3 pack. The previous design was a little to wide and tall. I have left the other files in for folk that want the old files. The new files have QPackMk3 in the file name…
Wydruk około 1,23 €–1,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This design is used to increase pressure of PC fans to get air pass through HEPA filters. Based on Noctua fans webpage.
Wydruk około 1,45 €–1,77 € nettoWstępna wycena dla PETGMateriał u źródła: PET
I designed this Fanshroud to make my RTX2080 quieter. The Shroud lets you mount a 120mm Fan into the 90mm Fan mount. The Fanshroud screws into the existing Fanmount Per Shroud you'll need: M3x6mm Countersunk Screw x3 M3 Nut x3 (Optional)…
Wydruk około 5,56 €–6,79 € nettoWstępna wycena jednego wariantu
When building my Voron I was looking for a nice bed fan solution 🤔 that would fit my Nevermore and help to bring the chamber temperature Even More up🔥 to where it belongs. Since I couldn't find anything that I really liked, I decided to…
When adding the Nevermore air filtration system and two additional the bed fans I wasn't happy with the cable management solutions that I found 😕. I started with designing these clips for the cable routing but that left me still missing a…
Taurus V5 Final Release Part of this release in the display case for Klipper WiFi connected TFT displays, please check it out: https://www.printables.com/model/624504 We're sorry this took so long, but the V5 changes were quite drastic,…
This is my addition to the Jonsbo N4 case to keep disks at safe temperatures. The magnets used are 2 mm thick and 8mm in diameter (4mm radius). The fans used are: ARCTIC P12 Slim PWM PST 120x15 Printed on Bambu Lab P1S with a black matte…
The NA-IS1-12 is a 5mm thick intake side spacer frames for Noctua 120x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
This is my version of Ender 3 V3 SE cooling upgrade to dual 5015 fans, 40mm silent hotend cooler and LED (optional). I decided to use 12V 4010 cooler due to was planning to connect LED to the same DC-DC step-down converter. To assemble…
You need 4 90/92mm fans. Print the two parts and glue them together. The duct is mounted with 2 screws on each side. For the fans you need m3 screws. On the back are holes for zipties. Post a make :)
HEPA/Carbon filter box for the Bambu Lab X1C 3D Printer. Kudos to the previous designers, for the great idea to have a modular filter box. The original used 40x10mm axial fans and exhausted at the top. The version I worked off of was a…
Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other accounts are taking my time for free, and this is not…
Minecraft Lettering Made this as a present for my nephew. Filament changes can be done layer based, so no MMU required . All pieces can be printed as aligned and without supports. Instructions: Pick all letters you need an print them.…
A special thank to Andrzej Sapkowski for creating a captivating book saga. 🐺 This collection was created at the instigation of the excellent work of the following designers: #WitcherCon [ Link ] 🐺 #Plaga3D [ Link ] #Alphaflight83 [ Link…
It's a Fan mount for 120x120x25mm fan that you screw in with standard fan screws. You can also print joints to add up a second 120mm FAN. That mount replace a 2x 92x92x8mm to a 120x120x25mm. It helped me to get 7C lower temperatures under…
The NA-FMA1 fan mounting adaptor permits the installation of the NF-A12x25 and several other Noctua 120mm fans on 140mm watercooling radiators (or other screw-mount applications that are designed for 140mm fans, e.g. as a case fan).…
For a detailed guide on how to put this together, please visit our article here: https://www.corsair.com/explorer/diy-builder/cases/3d-printable-hard-drive-cage/ TL:DR - We have made two versions: Infinirail version - fits FRAME 4000D…
The NA-IS1-14 is a 5mm thick intake side spacer frames for Noctua 140x25mm fans that can help to improve both acoustics and performance in suction or “pull” type applications where the fan draws air through obstacles such as grills,…
Tested and printed without issues using Cura slicer. I've designed fake BBS 'turbofan' wheel covers for my winter tires using 3D printing, adding a touch of style and humor to the mundane task of winterizing my car. Turbofan wheel covers…
Print with support in plate only Two versions: LEFT and RIGHT The rotor rotates clockwise, producing an outward airflow. The rotor rotates counterclockwise, producing an outward airflow. Print orientation:
This is a splitter that turns one fan header into two. It makes it much simpler for wiring up toolheads that have two part cooling fans (Dragonburner, Xol, etc). There are two types of the main body. One designed to fit in the space on an…
Say hello to Sylvester and Tweety caught in one of their classic cat-and-bird moments! This fun and playful figurine captures Sylvester proudly holding up Tweety, probably still plotting how to finally catch that clever little bird…
I am too lazy to enter what you need as screws but you only need m3 type and a couple nuts. Some holes are self threaded without nuts, you can figure it out if you inspect f3d file. Also bltouch mount is a bit high from nozzle you need…
Edit from April 24th 2023 Per request, I've added holes which “ should” work with SCPH-3000x I don't have any other model on hands than my 39000 so do it at your own risk. I'm keeping the old ones working on 39000 for now.…
I created this holder for my octopus pro board and rasberry pi 4. While you can just thread m3 screws directly into the holes I recommend using m3 threaded inserts. There is plenty of material around the holes so I just drilled them out…
I personally used it with this mod , but it works with the standard skirt pieces too. You need to slightly flex the mount to get the screw in. Print Instructions Material: Recommended ABS/ASA Quantity: 2 x Mount Layer Height: 0.2 [mm]
Printed in PLA. Used brass inserts for the supports and the ADXL holder on the fan cover. The back support includes a cutout for insertion of a cable tie if wanted, may or may not fit your cable ties. I used 3mm bolts for all connections.…
Posted as a remix for a commenter on my make of the ideal "Satsana Duct Remix for Ender 3v2 - integrated BLTouch mount (4010 + 5015 fans)" , plus the following changes: Added a cross bar between the front of the BLTouch mount and the main…
Update (12/5/2023) : adjust ABL sensor location to prevent z offset leveling from ramping into the build plate. I do not know why Elegoo let the hotend dip down then go back to your z offset. Strengthen one of the mounting hole. Update…
FLSUN V400 Fanduct for 4010 fans. I recommend this fans (24V Ball 12000RPM) : https://fr.aliexpress.com/item/32798634077.html?spm=a2g0o.order_list.order_list_main.13.21ef5e5b8i2sK2&gatewayAdapt=glo2fra
version 2 of my dual 5015 fan upgrade for the elegoo neptune 3 pro plus and max. This model has increased air flow flow over v1. Helps keep the stepper cool by pulling air directly off uses much less support material, prints fater, and…
…Please be sure to hit like & post a make, I'd love to see your prints! Print standard VORON settings, no supports required!…
A simple silencer and cover for 120mm fans. Works out great to change the direction of the air flow. Used on 3d printer cabinets and server rack chassis as well just very little support is required. Please print with the roof facing to…
适配90mm风扇 无螺丝设计 风扇需要M4螺丝 90mm fans adapter Screwless design require: M4 screws *4
Hi threeD Printers, this fan mount will allow you to mount two 40mm cooling fans in place of unused PCI slot covers in your PC. This design is using two open PCI slots in your computer case. It's designed to exhaust hot air from a…
This project includes cooling brackets for mounting 92 mm Noctua NF‑A9x14 fans to the Snapmaker U1 mainboard and PSU, along with a chamber insert/divider that improves airflow and adds thermal separation inside the electronics bay. Print…
I used to use @BaGooN's fantastic hotend fan guard on all my Mk3S printers. Better than any other fan guard I've tried, so naturally I wanted one on the CORE One(+) and Mk4 too. Here it is, with added openings for the two screws that hold…
Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other accounts are taking my time for free, and this is not…
These are simple anchors that snap onto the poles of your grow tent for clamping small fans to. These snap fit onto 16mm poles. There are a few version, I was playing around with the shape optimization in Fusion 360. The one named…
NA-AVP1 pads minimise the transmission of minute vibrations while maintaining full compatibility with standard fan screws and most other mounting systems: https://noctua.at/en/na-savp1
As printed by hundreds of H1 owners on Reddit, I present the: Triple & Dual 40mm Exhaust Fan Shrouds for NZXT H1 Case - Version 4.0 Benefits: Typically a 6 degree Celsius drop on RTX series GPUS with three fan version Additional 2-6…
Tried to make the PSU side cover easier to print, and slightly stronger, changed pins to holers, and changed spacing, moved fan as much as possible towards vent, added notch for fan cable. Made the mainboard from scratch. it uses the same…
Shortended BentBox filter, design from scratch. Carbon and Hepa boxes can be stacked and interchangeable. Support fans 4010 and 4020 and 40x80x15 Hepa filter. For avoid air leakage recommended to use TPU 1.75 filament like a seal. Boxes…
Update: Ahmad has created a version 2 of his design - please go check it out and donate to him: https://grabcad.com/library/mbot3d-mk2_rev2-0-ender7-style-fan-duct-1 Important: This is a remix of…
This is a remix of the already remixed 3,5" Vertical HDD mount from AlephBaker for three 3,5" HDD drives. I removed the bottom group, so that the HDD mount can be mounted on top of a 120mm PC fan. This allows air flow along the mounted…
The parametric Autodesk Fusion file can be modified to fit your exact fan size. Excluding the air blocker plate, the model prints in four different pieces. STL files and hardware: Fit 80x80 mm and 120x120 mm fans. To mount the fans four…
Ender 3 NEO , (it might be suitable for Ender 3 V2 NEO, but I haven't tried it) hotend cover for original fans. Everything should fit exactly see photo.After installation there was a slight reduction in fan noise. Maybe I will make some…
AU Cooling Duct NEW UPLOAD 14/05/2024 KLIPPER G-CODE FOR CHANGING BL-TOUCH PLACEMENT [bltouch] sensor_pin: ^PC14 control_pin: PC13 x_offset: -46.8 #Was -32 before new placement y_offset: 0 #Was -40.7 before new placement #z_offset: 0…
This is a modded Version of my Mini Wheels - BBS RS with an added Turbofan. I also encluded a blank version of the fan, in case you want to do an own design, or have a sticker made instead of the printed mesh. The file for the sticker is…
Remix of the “ Jonsbo N4 - 2x SLIM Fans Front Adapter ” This version uses 10x2mm magnets. STL available as one piece or two pieces. Used the same fans as the original ARCTIC P12 Slim PWM PST 120x15 (affiliate link) Printed on Bambu Lab…
Instructions available in English and French [EN]************ __ ************ A remix of Satsana for ENDER 5 PRO compatible with the bowden and direct drive system. + one version BL Touch (Offset: X-51 Y-12) The original air duct have not…
Since I'm moving to a hinged bed on my V2 350, the center gap will be occupied by the handle and my nevermore micro will no longer be of use. I wanted something to mount to the outside edges of the center bed extrusions, so they lift with…
(Files belong to their respective and linked owners.) Please email/contact me for immediate changes such as incorrect credit or placement, etc. I take no credit for any of these designs except for the extremely basic remix of some of the…
It's a modifified Taurus cooling duct to be used with a voolcano heatblock and nozzle. I've also made heatbreak fan mode that uses stock 4010 fan (it's lighter than the stock setup). If you print from ASA/ABS remember to scale model for…
Minimalist Bed Fans I have designed minimalist bed fan ducts to help heat the chamber of the Creality K1. These fans sit off to the sides to enable easy bed access and should help speed up and increase chamber temperatures during preheat…
Two versions Z2.5 for stock nozzle no changes needed. Also suites K1 nozzle with 0.7mm extra clearance over stock. Z4.0 For Volcano nozzle. Multiple Fan adaptor options 2 x 5015 1 x 5015 For K1 and Volcano nozzle refer to the Nozzle/Heat…
Ender 3 Pro V6 Hotend Mount With Stock Fans And BL-Touch Mount There are many designs for mounting a v6 hotend on an ender 3 pro. still i had a hard time finding a design to make use of the stock ender fans. I decided to create a design…
I couldnt find a shroud for this specific GPU model so designed one myself. You can revert this mod without trace in case you want to sell the GPU. Printing: Depending on the printer the shroud could be too big to fit horizontally. Either…
**** Dec 2nd - added V3. other models didnt have anough space the actually fit the 5015 fan. This is still not validated but its based off the two remixes noted below This joins a lightweight OE Part cooler mount and 5015 blower fan Print…
These are spare parts for the TwoTrees SK1. The Backshroud got hexagonal cutout instead of the original “doted lines”. Backshroud and the Fanshroud got several cutouts so, that you don't need to remove the filament, the tensionknob, the…
Personal use only. Do not redistribute! It is absolutely not possible to download this model and upload it to different accounts or platforms. I'm Crealitale - Tasty Voxels; other accounts are taking my time for free, and this is not…
Opened up the full hexagons so can be use for connector inserts for CANBUS, fans, ERCF, PG7, & filament sensors. For inserts use these: https://www.printables.com/model/790873-voron-24-skirt-connector-insert-for-canbus-fans-er
Ich habe das Originale Fan Cover genommen und habe noch einen Ausgang dazu gemacht. Außerdem habe ich die Öffnung kleiner gemacht, damit man einen Lüfter mit der normalen Öffnung benutzen kann. Der andere mit der großen Öffnung ist für…
1. Choose your preferred model: v2 - classic and simple v3 - bridging improvement (I printed) v3L - 5 mm longer (in work) 2. Slice and dice My settings: 0.4 nozzle, 0.2 layer height, pla No supports, no raft, no brim, infill: 20% Slicer:…
This adapter converts 2x120mm square fans to a 4 inch female air duct hose. It is meant for feeding air from 2 side by side 120mm computer fans to an exhaust air duct for from a 3d printing cabinet. The 2 120mm fans should be mounted to a…
This mod allow you to install two additional Fans under the bed. I am getting about +10°C 4x M3 Inserts.. to mount the Fans. (Voron BOM) 2x M3x8 (Voron BOM) 2x T-Nuts for 2020 Aluminum Extrusion (Voron BOM)
I created this board holder for the Big Tree Tech Manta M8P board. It also allows you to mount fans above the board for cooling included dual 4020 fan mounting option( Untested! ) as well as standard PC fan mounting option. I have…
Note: this was tested using a 6mm thick bed with a Keenovo 750w heater. With the stock bed/heater you may see less effective results. You can use 1 or 2 sides to help with chamber heating. Uses 5015 24V blower fans. Can be connected to…
A simple mounting bracket for mounting up to two 3010 axial fans to you Fysetc CNC Bed. Featuring threaded inserts for securing the fans and mounting and a cable run hole in the centre to keep it all tidy. plus a new connection block…
Adding 5x 140mm fans with two 16x20x1 filters, giving it a large surface, makes noise levels virtually undetectable when running at max 12v. I made 3 of them so far. If I was to change something it would be to replace the panels screws…
Spacer for mounting 25mm Noctua Noctua NF-A8 PWM on the rear of the ZimaCube. The standard fan cover will be clipped in the spacer. In addition to the 3D-Printed part you will need 8x 5x3mm or 6x3mm Magnets for mounting it to the…
View the following link for a video demo of the fanned version of this project. https://www.printables.com/model/547261-piston-engine-mechanical-sculpture View 8-step assembly guide in photos. Post your makes! Seeing your prints is my…
This is a remix of a remix. The original idea is from this Remix on thingiverse from vfrman. A rear mounted electronics case for the Ender 3 or Ender 3 pro. It includes space for the following parts: A Raspberry Pi 3B+ The original Ender…
Unleash your inner superhero with this 3D printable Batman wireframe keychain. Inspired by the iconic bat symbol, this lightweight and stylish accessory is perfect for Batman fans, collectors, and cosplay enthusiasts alike. The intricate…
This is a small remix of an existing model I found on onshape. All credits to the original designer of the fan shroud. I'm using sunon fans with the product id mf40201vx-1000u-a99. These are Sunon 40x40x20mm fans. They are not expensive…
Don't want to suck hot carpeted air, dust and dirt into your expensive GPU and case? Want cooler temps and higher airflow? Use these ducts to pull air in from beside the case not directly and immediately beneath it. Position them pointing…
As the name suggests, this is a bracket mod for the Hyte Y60 to allow for a triple 120mm fan configuration on the side. The design was inspired by a bracket mod designed by Kataya on Maker World. I have attached the link to it in the…
Projekt elementów konstrukcji lekkiego plotera CNC pod laser SculfanS9. Wydruk ośmiu elementów pozwoli połączyć cztery profile np. V-slot 2020 w ramę, oraz na piątym profilu trzeci wózek liniowy pozwoli zamontować laser w tym przypadku…
Another version of the riser. Now it is possible to replace the standard 92x92x15 mm fan with the more common 92x92x25 mm fan. Additionally, there is the option to install a 120x120x25 mm fan. I installed both fans, replacing the standard…
For nearly 25 years, I've been using some old 4U ATX rack mount cases that I got from surplus. For as long-lived as they've been, the ventilation provided by 2 front-mounted 80mm fans is not enough to run modern CPU/GPU combos without…
This is my second design for the Elegoo Neptune 2. I really like the Neptune 2 but the stock cooling fan was inadequate for high-temperature filaments. The stock fan produces great results with standard PLA, but the second I tried some of…
Mounting kits for mounting 3 Noctua NF-A4x20/A4x10 fans above and 3 fans below the CPU cooler in Fractal Design Terra case. Can be used only in position number 1 of Terra's inner bracket. The top bracket connects to PCI-E riser included…
This is a remix of Schnabulation's remix of Ahmad Sundari's excellent hotend design, originally found here - https://grabcad.com/library/mbot3d-extruder-mk-2-mod-1 The above link has since expired, however you can find all the relevant…
Jinx Fans - League of Legends Wall Decor
I remixed the original version of the Noctua's High Efficiency Fan grill to allow use on 40mm fans. I made this to make 40mm fans slightly quieter. If you're running a 40mm fan upside down, I would highly recommend printing the grill with…
With this Part you can add 3 x 40mm fans to the front of your PC. It fits exactly into a 5.25" CD-tray.
4 new variants : #1 lsi-fan-bracket-v4-Finished Bracket No holes in the pillars v2.stl - Only holes in the pillars removed, for a Noctua fan #2 lsi-fan-bracket-v4-Finished Bracket Noctua Raised pillar v1.stl - For a Noctua fan, holes in…
This is a custom cooling solution for an NF-Crazy Plus hotend on an Ender 5 Pro. The NF-Crazy Plus is a Mosquito clone that is wider than the original Mosquito, but also mounts using the stock Creality mounting solution rather than the…
A fan duct and mount for dual 5015 fans for the Anycubic Kobra Neo. I wanted something for the Anycubic Kobra Neo that provided the dual 5015 fan solution like the Hero Me Gen 7 style of part cooling. This is my remix to support dual 5015…
I wanted to make some changes to the original design. I need to mount mine to a 2020 Alu extrusion. So here are some highlights of the changes I made: Added the lip to the HEPA section and cut out the lid, making it stackable in any…
Description Hi everyone! This is my custom 3D printed enclosure for the BC-250 mining card / Bazzite gaming pc. I designed this because I wanted a case that fully encloses the board along with the PSU, rather than having parts hanging…
Intro The CapMaster is not just another bottle opener — it’s the ultimate opener for makers, tinkerers, and 3D printing enthusiasts . Designed specifically for people who love smart, minimal, and functional tools, this opener combines…
Is a remix of https://www.thingiverse.com/thing:4408571 . Fan duct for Creality CR-10 / Ender 3 printers with Micro Swiss Direct Drive Extruder. Suitable for 40x40x20 fans and BL-Touch. BL-Touch offset X=-46 Y=-9 The holes for the fans…
2 Part front adapter to add standard pc fans ot the front of the jonsbo n4. Printed on Bambu Labs A1 mini with tree supports.
