454 modeli
Laptop raisers that are compatible with the 2019 version of the Acer Nitro 5 Gaming Laptop. They slide into place on the underside at each end using the screw holes as an anchor point/guide. Good for improving airflow or better…
Wydruk około 1,08 €–1,32 € nettoWstępna wycena dla PETGMateriał u źródła: PET
Raiser / stand for MikroTik RB5009UG+S+IN and RB5009UPr+S+IN POE IN/OUT (thank you @Omni_RF for testing) router. With the stand the ground clearance is 24mm. Thus, you can route your network cables underneath the device and also help to…
Wydruk około 0,05 €–0,06 € nettoWstępna wycena jednego wariantu
Our robot vacuum cleaner is 5mm too high to fit under a sideboard with its turret. That's why I gave it little feet. Now - as you can see - dust doesn't stand a chance under the sideboard either :) The Fusion360 model uses params to be…
Wydruk około 1,28 €–1,56 € nettoWstępna wycena jednego wariantu
Cats survival instinct makes these furry companions tend to drink water from above the ground level to avoid poisoning or bacteria infection. This little stand will help your pets keep their instincts intact and also let the spilled water…
Wydruk około 0,95 €–1,16 € nettoWstępna wycena dla PETGMateriał u źródła: PET
This riser matches the base of Dell's gaming monitor, a (hopefully) less ugly way to raise the monitor a bit. My own monitor is a G3223D, but I think this should fit their entire gaming lineup circa 2023. See photo. As an additional…
Wydruk około 5,00 €–6,11 € nettoWstępna wycena jednego wariantu
I would love to share with all of you my holder/dock for Apple's M4 Mini with integrated OWC Express 1M2 holder enclosure. With added notch for the power button Print Setting's : I Recommend PETG or any stronger more heat resistant…
Wydruk około 4,51 €–5,51 € nettoWstępna wycena dla PETGMateriał u źródła: PET
My custom designed lid raiser for the Creality K1 Max. I wanted a simple version which required no additional components but allowed me to open and close the vents on the fly. Lid raisers for the K1 Max help improve the clearance between…
Modernly designed holder for headphones with clear, minimalist shapes. 🚀 Support My Work & Supercharge Your Business & 3D Projects! 🧡 Join my Patreon and unlock 400+ premium 3D models – with new designs every week ! 🔧 Includes STL +…
I remade the model in fusion and made it so to allow me to add the ledstrip that i bought from aliexpress , I hooked the ledstrip up to a custom PCB which can controll the RGBCT from homeassistant and will clone the Bambulab Ledstate from…
simple, basic lid raiser for Creality K2 plus Raises the glass lid by 40mm so that the bowden tube no longer rubs against the glass. Adds the option of ventilation. The ventilation sliders are inserted into the front, back and side…
This piece joins the Meyui ONAMI Collection , carrying forward the series’ iconic wave-inspired frame. Elevated to 13 cm , it helps your cat or small dog eat in a natural, ergonomic posture while keeping the dining area tidy. Adjustable…
This is a remix of a thing by timlee . Thanks to timlee for making the fundamentals for this thing! What is it? A lot of users of the new Creality K1 have released their bowden tube from the cable chain in an attempt to make extrusion…
The most upright backrest position on the Thule Urban Glide 2 stroller is too reclined. This gadget props it up higher. It's based on the ingenious design by @Thomas_157995 which is really clever and well done. I've used one of Thomas's…
If you are using the Creality K1/K1C Hinged Lid Riser and need to keep the lid open while printing some materials (e.g., PLA), do you feel that the opened lid is wobbling/ shaking a little too much during prints? Look no further. This…
Chain Raiser for K1 extruder No supports needed. Help the movement of the chain without interferences with head and rods Other mods for Creality K1 You can buy me a coffee with a donation. Me puedes invitar a un café haciendo una donación…
Lemarchand box, from the movie hellraiser made into a puzzle
simple, basic lid raiser for Creality K2 plus now in Version 3 The following I copied from Original https://www.printables.com/model/1169180-lid-raiser-for-creality-k2-plus-2025-02-22-added-v Raises the glass lid by 40mm so that the…
These raisers are made for the GraviTrax Junior marble tracks to raise the tracks for longer runs
Fastener for lid raiser made by Tony F for the Creality K1 Max printer.
A somewhat functional version of the puzzle box from the Hellraiser movie franchise. Turn one of the dials to unlock the box and allow it to be moved to the star configuration. Does not summon Cenobites though. The face designs are based…
Reproduction of the Hellraiser Lament Configuration based on LeMarchand Boxes. Phillip LeMarchand was a French architect, artisan and designer who is posthumously credited as possibly one of the most prolific, if undiscovered, mass…
I adjusted @DutchDeveloper design to include cut out for handle screws.
This is very very tight, need to hammer in. And it have rib design to catch and stay in place with the OG top lid. Might need support for the one with hole. If need to print things like ABS, just masking tape around to tape over the…
I designed this to make my desk more organized. UPDATE 16.09.2024: Split Boxes avaiable! Can be printed on printbeds with 254x254 (bambulab etc.) UPDATE 13.09.24: Now Splitparts available !!! So you can print with smaller printbeds!…
all available raisers had angles that were too wide for my liking. So I made one, it connects to the keyboard via slide rails, you can also flip it over to keep the keyboard upright when not in use. Tilt the pieces towards the inside, as…
I noticed theres a vent on the bottom of the Series S as it lays horizontal. In my circumstances, I cant stand it up vertically. So I decided to design something quick to lift it up 20mm.
This is a remix of JC's modular riser system. Three major changes i made: 1.) increased height, so it can be use with Extruder fan mount 2.) LED mount for the betweeners 3.) now use M3 screw&nuts for the pin, no more pin dropping and…
This is a refined tilt open support, with a strengthed and angled glass lip and designed to fit K1 Max Glass Lid Raiser
Easy to print: 12 pcs (count of prints in name of files) Without any supports and bridges. Material: ABS or PETG (pay attention to the shrinkage of the plastic to prevent gaps) Easy to assemble: 1. Fix pairs of angles with M3x16 on top…
I am happy to present this set of 4 pet bowl holders! You can choose the one you like best, and you can also change the diameter Ø of the bowl hole. Remove the heart symbol ❤ If you wanna to remove the heart simbol (e.g. to save print…
Yes you can find dedicated furniture for your CriCut machine, but we have a 3d printer for many reasons including the “I'll do it myself”. So here it is, a simple idea to raise your Maker (or Maker3) from the table and have room to store…
Thanks to Tony F and michel jubault for the Inspiration and the basedata. Installation Quickguide: 1. Print 4 Sidebar (with or without Vents how you like) 2. Print the same amount of Vent Slides 3. Print 3x Corner Spacer 4. Print 4x…
This print helps maintain the printer's ventilation without needing to remove the cover. It can be useful when there isn't a suitable place to remove the cover, but you want or need increased internal ventilation. Another use is when the…
Print 4 of these and insert them on the sides of the console. This raises the console 3cm above the surface for improved air circulation and better cooling. (You can use some rubber tape for the bottom of the feet) Remixed form…
Little print to raise the arm rest of your Cupra Born
Hello, this is my first model I have uploaded but not the first model I have designed so please let me know about any possible modifications I should look into. This is a simple aquarium light raiser for rimmed aquariums. Should be…
When using 3d printed sliders like https://www.printables.com/model/890612-sky-team-boardgame-sliders-thin-brim or https://www.printables.com/model/711058-sky-team-board-game-sliders the ice breaking board does no longer fit well. With…
I wanted to install a Rush Tank Solo on my Quad, but I noticed that the only mounting options it offers are 20x20 on the top side of it. Since I have my TBS Tracer right where my 20x20 Mounting Holes are on my Frame and I didnt want to…
Description Raise the Apple Magic Keyboard for more comfortable use. Print Settings Bracket: Supports: No Resolution : 0.2mm Infill: 20% Perimeter: 4 Extender(you need two(2) of it): Print in on the side, see photo for orientation.…
We have 2 versions 32mm tall and 27mm I have also added a bigger/flat bottom part + i have added cross bridges so it will not need support. + increased the walls to be more rigid when the screw sits Print settings: 5 Top/Bottom 3 walls…
As the String Saddle for my Classic Guitar broke down over the years, and replacement parts are stupid expensive, I designed this replacement part, which worked great on my guitar, though might eventually be a little off on others. So in…
Fusion 360 File Included so you can change the size of the top, bottom, and loft. Used to lift my Ikea desk 10mm to give the RoboVac enough room to sweep under without getting caught. Print instructions Category: Household Summary Fusion…
After modding my Anycubic Kobra 2 with 92mm fans, I needed some feet raisers to clear the thicker fans from the table. These feet raisers/spacers fit inbetween the printer and the rubber feet themselves. I simply used a M4x40 screw to fit…
Raiser feet for the Atomstack X20 PRO series. Raises the laser frame by 25mm. Included step and obj files for your own remix. The screen foot has to be placed first without the frame. Depending if you want the mounting screws in or out…
You need to raise your printer if you want to install fan upgrades. These feet adapt to the ender 3 design and raise your printer so you can install larger fan covers underneath.
Changed the position where the RGBCCT light strip can be bent to better fit. We have also made some changes to the dimensions, increased the angle of the lamp surface, and opened lamp slots. There are holes in the back for threading.
As a K1 Max owner I think it is a right of passage to create a lid raiser design so here is my effort. As I have gone down the chain free route and wanted to move my sensor, the rear section includes a removable bracket for the runout…
A 0,79inch (2cm) high raise for hisense tv feet. The Hisense tv feet is shown in the picture and fits nice on the raise. I created the raise because my soundbar is currently to high in front of the tv and blocks the signals from the…
A stand I made for the Dell XPS 15 9570 to make it level with my other screen. It probably fits just as well with the previous models (9550, 9560) but I have not tested this. You can also stick smaller laptops in it but then the angles…
K1 Max top mounted filament spool holder modded to use vented raiser from NorcoT https://www.printables.com/model/623798
Here is a model of a stand or feet for a MIDI controller keyboard that raises the keyboard by almost 4cm at the front and 5.5cm at the back. This is perfect for routing cables underneath the keyboard, and flat controllers such as the Akai…
These 3D printed material raisers are designed to elevate and support materials being processed in a laser cutter, ensuring optimal airflow and clean cuts. Each raiser has a sturdy, grid-like structure that evenly distributes weight while…
rises the cup by 35mm diameter of the zylinders at the bottem is 10,75mm distance between the zylinders at the bottom is 32mm You need 2x M4 countersunk bolts (DIN 7991) with a lenght between 12mm and 20mm. If it fits other…
Minimal laundry-rack raiser for vacuum robots. Fits racks with 16mm tubing. Snap-fit without play. Wide footing. Still allows the rack to fold completely. Raises the rack by 20mm, just enough to trigger the front bumper of most vacuum…
On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of the height of a Tennisball, but not…
This is a very simple model that elevates the original AMS Bambu Lab holder. I created it because I printed the holder from the BambuLab website and it turned out that the extruder cable rubs against the bottom of the AMS. I didn't want…
Note: Here is an updated version ! On my Wahoo Kickr Core, mounted on Tennisballs, I always felt that my hands have a lot more stress, as on the street. After a bit of thinking it was clear to me that I raised the backend by about 50% of…
This plant pot gadget lifts your pot about 1cm from the ground. Water will run out better and air gets better to the roots. This makes a healthyer plant :) siutable for many plantpot sizes! measure across the bottom of the with of your…
Plant Pot Raiser - No Supports Remix of: https://www.thingiverse.com/thing:4860388
Remix of DutchDeveloper's ‘The best Bambulab Glass Top Led Raiser mod’ which has two issues: The slot is too close to the inside edge, causing slicer to generate holes in the wall. The slot fitment at 0.20mm is way too loose for my…
This is a simple solution to raise a Kallax sehlf by 10cm. This way my Robot Vacuum is able to drive under it. (At least my Roborock s7 MaxV) For Kallax shelfs wider than 2 i would recommend also print the middle raiser so that the Kallax…
Wanted to have my iMac a bit higher with the foot of the iMac surrounded, so I made this. Remixed from this part: iMac 27" Tidy Tray by Jimchad on Thingiverse. I was too lazy to do the measuring on the foot contour myself. Jimchad did an…
I found the regular feet of my Logitech MX Keys too sticky (I move the keyboard around a lot). That's why I printed the back raisers from Thingiverse (thing: 4877517) but did not find any raiser for the front - so I made my own. If you…
I created this modified version of the model because the holes in original and the group's model do not match the original design. I have adjusted the positions of the holes in each part to ensure a better fit. This modification should…
These legs go well with IKEA's BERGSHULT shelf. You will require only patience for two times 7 hours and about 2x300 grams of PLA or any other filament and the BERGSHULT shelf. I used PLA, and it turned out to be perfect. The legs just…
I printed on 0.4 nozzle with: 0.2mm layer height 3 walls 20% infill cubic 4 top&bottom The right stand, need support for the switch hole, I used tree.
This hold your xTool and u can use the raiser if u want to use a rotary. If you need help, have questions or want to collaborate, please feel free to join my discord server: https://discord.vr6syncro.de If you want to support me or thank…
Wall raiser for EIBOS Cyclopes filament dryer to keep filament spools from overheating. Eibox Cyclopes is great filament dryer with fatal flaw - hot air is blown directly to filament spools from very short distance. Despite temperature…
Our kitchen sink has a lip that makes it higher than the counter top. This causes the dish drainer rack to have the sink side sitting higher, preventing water from dripping towards the sink. These feet will raise the other end of the…
Lid raiser for the Creality K1. Features: Has a Bubble for the Cable Chain to move into when printing on the left side of the build plate. Hinges so the lid can be opened for printing PLA etc. Handle for living the K1 Lid Extended right…
This simple and practical stand raises your laptop and creates extra storage space underneath, perfect for keeping notebooks, pens, or other essentials close at hand. Its sleek, modern design fits seamlessly into any workspace and works…
Another raiser for the k1!! I wanted a clean raiser with a bit more hight and more room for the cablechain sideways, without sticking out and looking strange… This one is primarily made for a custom glass or pc top (345x345X4 mm R20…
NOTE: I make no claim or warranty about safety or stability of these. You use them at your own risk. I had Bought this bed from Ikea: http://www.ikea.com/us/en/catalog/products/30360487/ Turns out the mattresses they displayed with it…
Now these are 5 parts to print.(Print upside down) Tube outlet on the side. Separated lid plug. Connections on m3x8.
A two part set that serves as a laptop raiser for use with an external keyboard, as well as a vertical stand to store the laptop when not in use. Size: It's design to fit a 13 inch laptop, such as a macbook pro. Maximun thickness to fit…
Whether you want to raise your Anycubic to fit a bigger motherboard/PSU fan, to fit storage space beneath or just to fit in your space, these feet will raise your Anycubic by 65mm. It uses the standard rubber feet and screws (screw…
If you're a fan of IKEA furniture, you may have encountered a situation where you have an old and a new version of the same product, and they don't quite match up. This was the case for me when I had both an old and a new IKEA KALLAX 2x2,…
Horror Titans - Pinhead - Hellraiser
Soporte para poner el filamento en la parte superior y que encaja perfectamente en el raiser de sector7 studios.
Pedal raiser designed for Thrustmaster T3PA. 85mm higher, 35° closer to vertical (~10° from vertical) Print Settings Rafts: No Supports: No Resolution: 200 Infill: 20 Filament: PolyMaker PLA Category: DIY
Below raiser for the Creality K1 to avoid things get under the machine, improve the general support and improve the below ventilation Not suitable for the K1 Max due that I don't own it. You have the full version if you own a 400*400…
Description Lack ENCLOSURE Raisers to lift the table. With and without tabs to hold the glass. You can find different height files (both with and without tabs) - 10mm, 20mm, 30mm, 40mm, 50mm, 60mm, 70mm, 80mm, 100mm, 120mm. How to use it…
Feet that fit the 47 liters tank from Autopot to elevate it by 150 mm
Because of having small cups, coffee was splashing all over the place... even with lowered coffee dispenser. Designed this cup raiser to fix even with installed milk carafe.
This is a remix of “This Does Not Compute’s“ design, you may want to have a look as well. It has a lower top edge (I suggest to print the model upside down with supports) and changed base. If you need perfect match to the iMac 27" (2017…
you might need to sand the mating parts a little because of your printer/filament. the clearance on the model is zero. you will need to print: 2 copies of the first plate with the main drawer. 2 copies of the second plate with the drawer…
I used blue PLA at 0.3mm layers and 15% support cubic infill. Designed for a surgical glove size 9 hand, or a medium nitrile glove-sized hand.
Arcade 1UP feet to raise the cabinet. Print 4 of them. The cabinet can be raised further with additional modules (coming soon). The pieces in the photo were printed with a 0.8 nozzle, layer 0.4 and 7% infill. For greater stability you can…
Handle and raiser for Elegoo Centauri Carbon. The bottom features 2 holes spaced 30mm, for use with the original self-tapping screws. Can be used on the door and on the top lid. Print: I printed with ABS, 3 perimeters, 20% gyroid infill,…
This adds 2 news sizes. The original opening is 16 cm. This adds supports with 6 cm and 3 cm openings.
I needed to make my Ikea Lack Enclosure a bit higher, so I took original files and designed them in a way to become a 6cm higher. This includes corner files, walls and wall clip to keep them together. To raise your Lack Enclosure you're…
A part that help to level either part of the sonoff door/window sensor. Beveled edges indicate which side attaches to the sensor or the magnet. It is possible to scale it to whatever height needed in the slicer to adjust for your mounting…
Here's a Remix of the Gridfinity Base from @thrutheframe (https://www.printables.com/de/model/287233-bambu-lab-x1-gridfinity-base) for the X1 Sliding Vent Glass Top Enclosure from ktothestank.…
The BLTouch I use was too low, it kept bumping into prints and especially the bed clips, so I made a model to raise it by 3.5 millimeters. You should print this on it's side with supports! This will offset the Z axis by 3.6 millimeters, X…
risers for kobra max 2 10 mm high with tops to avoid movement, it fit in the rails and you can rehuse the same screws to mount the risers. you can modify the high in your slicer but you will need longer screws.
For using the Elegoo Rotary Attachment you will need to extend the height of the whole frame. Either you buy them from Elegoo directly or you print them. I scaled the threads so that there is no post processing needed. Print and screw…
Overview Even if this mount is specifically for the Andonstar AD407 microscope, the mount may fit for other versions like AD409, AD302 and probably others, too. Just check if your microscope has a diameter of 35mm. If yes, this will work.…
An upgrade for the Creality CR-200B 3D printer. It's a spacer that elevates the top dome, preventing the cables from rubbing against its upper part.
Sometimes you just need to go higher with the printer. That's what this gadget is for. Of course, it is fully compatible with the original legs and anti-vibration pads.
I found this nice looking feet on Thingi but i wanted something i can use with the original rubber feet. So i remixed this one. Now you can use the original rubber feet and raise the Ender 5 Plus up to 37mm. I added a small 3mm deepening…
![Glue free Creality K1 Top Spacer / Raiser - Honeycomb vent [18June2023 Updated]](https://media.printables.com/media/prints/498294/images/4054428_6e5a5d2b-6758-4f12-a14f-88fcbd5b6b6b/pxl_20230604_135435086.jpg)
![[V2] Super ergonomic raiser for K1/K1C (.f3d required)](https://media.printables.com/media/prints/878138/images/6734310_fe81ae9d-091b-4a21-9454-e63d316f981f_bf0f9397-53b7-4ba2-862b-c8c60dc39eb1/123.png)
![K1 Max tilt open lid support redesigned to fit K1 Max Glass Lid Raiser (with Sliding Vents) [ADDED: sizes]](https://media.printables.com/media/prints/1002651/images/7629517_62fb3ee1-aec1-44bd-98f7-2312b4310ede_ba387ca4-9b99-43b6-bae3-25b68141b96b/20240910_101301.jpg)
