Wyniki wyszukiwania: arducam

Sortowanie

162 modeli

P
Printables6d6178

Arducam B0205 1080P Day & Night Vision USB Camera Case / Enclosure

This is an enclosure for the Arducam 1080P Day & Night Vision USB Camera Module (SKU: B0205) which is a nice camera USB with auto-switching infrared night vision. The back of the enclosure has a mount that works with the Modular Mounting…

Pobrania
1271
Polubienia
97
Ocena
5
P

Arducam OV9281 Case

Case for Arducam OV9281 and similar cameras. It requires 4 4-40x5/8" screws to secure the camera inside the case.

Pobrania
648
Polubienia
12
Ocena
5
P
PrintablesJacob Thompson

Arducam Case and Mount for USB Camera Module

I designed this case for an Arducam. I specificall used the B0200 camera ("Arducam 1080P Low Light WDR USB Camera Module for Computer, 2MP 1/2.8” CMOS IMX291 100 Degree Wide Angle Mini UVC Webcam Board with Microphone") Amazon / Arducam…

Pobrania
638
Polubienia
32
Ocena
5
P
Printablesashbuilds

ArduCam 16MP Autofocus Camera Case

ArduCam IMX519 https://www.arducam.com/product/imx519-autofocus-camera-module-for-raspberry-pi-arducam-b0371/

Pobrania
450
Polubienia
14
Ocena
5
P
PrintablesRoland Deschain

Ender 3 ZAxis Camera Mount for Raspberry Pi Camera V2 (and Arducam IMX519)

Codemonkey1973's Ender 3 Camera Mount for Raspberry Pi Camera V2.1 was very well designed but I wanted to cleanly route the cable to the back and saw room for improvement. So I rebuilt it with the following improvements: Threaded holes…

Pobrania
449
Polubienia
35
Ocena
5
P
PrintablesSeverusx

Camera Case for Arducam Day-Night Vision for Raspberry Pi Camera

This is a remix of the excellent design from WHerzog to allow the usage of the Arducam Day-Night Vision for Raspberry Pi Camera, Wide Angle Automatic IR-Cut Switching All-Day Image, IR LED for Low Light and Night Vision, OV5647 5MP 1080P…

Pobrania
343
Polubienia
16
Ocena
5
P
Printablessliverbaer

Arducam 5MP Wide Angle USB Camera Mount - UB0233

I bought this Arducam 5MP Wide Angle USB UB0233 camera on Amazon, to try out with OctoPrint. I had it wired up with twist ties. I couldn't find a mount specific for it, so I figured I'd make one. There's a Logitech C270 style connector…

Pobrania
323
Polubienia
27
Ocena
4,67

Arducam Raspberry Pi Noir Camera Module v2.3 - 8MP IMX219 (RPI-CAM-V2)

3D Model of the Arducam Raspberry Pi Noir Camera Module v2.3 8MP IMX219 linked below. LINK: https://a.co/d/a3vHtyj

Pobrania
302
Polubienia
5
Ocena
5
P
Printablesjeronbernal

Voron / 2020 Corner top mount for Arducam 8mp / picam

remixed diyshifts raspicam/arducam mount for the larger 8mp version, added a little voron symbol, widened the hole for the larger lens, aswell as change the bracket mount to make the camera raised a bit, among other QOL addons NOTE: this…

Pobrania
274
Polubienia
44
Ocena
0
P
PrintablesDavid Ross

Bambu Labs P1S - Mount for the Arducam IMX708/Raspberry Pi Camera

This is a mount that's designed to house an IMX708/Raspberry Pi camera inside a Bambu Labs P1S 3d printer. I measured it all up with the IMX708m but it should also work with the stock RasPi camera module. Once you've got the video set up…

Pobrania
237
Polubienia
27
Ocena
4
P
PrintablesQwertymanzero

arduCam rev E or B0506 cover

It says rev E on the camera. not sure what that means. Anyway, added holes to work with this model. I flipped the spacer and sanded it down so it wouldn't pinch the wire going from the front to the back. not perfect but it works. might…

Pobrania
231
Polubienia
9
Ocena
5
P
PrintablesMaHera87

Prusa MK3S (MK3S+) Arducam Autofocus Pi Camera V2.1 Mount mod

Minor modifications to fit the square camera of the Arducam autofocus camera. The lower pins were moved as well by 0.8mm to have the board fit easier into the case.

Pobrania
225
Polubienia
26
Ocena
5
P
PrintablesSkeletalPrints

Arducam Mount for 1in Box tube FRC 2877

Here is a link to the CAD: https://cad.onshape.com/documents/c6dbc3d6433bca696258d866/w/54d51c44b96ec7cce082f748/e/0325a5e5995a94b8c2d8da66?renderMode=0&uiState=63e95df58178855d47cc2581 Whole robot CAD:…

Pobrania
202
Polubienia
3
Ocena
0
P
PrintablesDana

OpenScan Mini Arducam IMX519 Camera Mount and Back Cover

Version 1.0 Intended Design/Use An alternative Arducam IMX519 mounting system for the OpenScan Mini and a back cover that attaches to it. First, let me start by saying that there is nothing wrong with the original mounting system (a…

Pobrania
202
Polubienia
22
Ocena
5
P
PrintablesApproxit

Arducam IMX219 Auto Focus Camera Module cover for Articulating Raspberry Pi Camera Mount

After I replaced my stock camera module with Arducam IMX219 Auto Focus Camera Module , I found out that it can't fit in cover provided in Articulating Raspberry Pi Camera Mount. So I took its step file and aligned camera module hole by…

Pobrania
199
Polubienia
20
Ocena
5
P
PrintablesAdjuro

Arducam IMX219 USB camera case for Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

Summary I wanted to use the amazing support from https://www.prusaprinters.org/prints/3407-articulating-raspberry-pi-camera-mount-for-prusa-m to be able simply to use the Raspberry Pi with an Arducam IMX219 camera module camera as…

Pobrania
195
Polubienia
13
Ocena
0
P
PrintablesBuild-a-Printer

Arducam 64MP front case

Changed the size of the lens hole to fit for the Arducam 64MP(https://www.amazon.com/Arducam-High-Resolution-Autofocus-) (WIP- Will upload pictures soon as this is going in my Voron 2.4r2 350^3)

Pobrania
180
Polubienia
5
Ocena
5
P
PrintablesSnY

Arducam 16MP Autofocus camera cover for Articulating Raspberry Pi Camera Mount

Quick mod to fit in the Arducam 16MP Autofocus camera board based on the Sony IMX519 sensor. Due to slightly lower supports I had to use tiny screws, but that's easy to fix.

Pobrania
170
Polubienia
12
Ocena
0
P

Flashforge Adventurer 5M - Arducam Camera Mount

I created this camera mount for the Flashforge Adventurer 5M. The camera I used is an Arducam, but this will work with most 38x38mm camera modules. Installing Camera to Mount: This is designed to use 4: M2 screws to attach the camera to…

Pobrania
168
Polubienia
44
Ocena
0
P
PrintablesDirtClodimus

Arducam UC-684 Camera Mount for Voron Printers

This is a mount for the Arducam IMX291. I purchased the camera from Amazon here . The parts consist of a back cover, front cover, and a mount. 2 mounts are included. One mounts in the corner of two 2020 extrusions and one mount is for…

Pobrania
164
Polubienia
18
Ocena
0
P
PrintablesMahon2486

Arducam B0332 Cover and Mount

The FRC team I'm a part of (3015) uses these cameras and I designed these mounts. Decided I should upload the .stl's for anyone that wants them. I'll try to post new revisions as well. Print Orientations: The cap should be printed with…

Pobrania
162
Polubienia
5
Ocena
0
P
PrintablesChiral

Openscan Mini - Arducam - Ringlight -Adapter

Adapter for the 16MP IMX519 Arducam and the pre soldered ringlight to properly mount them on the openscan mini scanner. During assembly of the scanner I had problems mounting and aligning the camera and the ringlight properly because…

Pobrania
154
Polubienia
22
Ocena
0
P
PrintablesTheSith

Arducam front mount

This is remix of front panel for Arducam 16MPx with Autofocus. Original have circle cutout, Arducam need square cutout. Print instruction: Printer brand: Prusa Printer: Mini+ Rafts: Doesn't Matter Supports: No Resolution: 0.15 - 0.2…

Pobrania
152
Polubienia
7
Ocena
5
P
PrintablesJuniormunk

Arducam OV9281 OV2311 Case

This model is a case for the Arducam OV9281 and OV2311 using this USB C adapter board https://www.etsy.com/listing/1842851233/arducam-ov9281ov9782-usb-c-converter-pcb Uses an m2 x 4mm heatset insert and 4 M2.5 x 10mm bolts.

Pobrania
151
Polubienia
5
Ocena
0
P
PrintablesKohai UT

Raspberry Pi Camera Mount - Camera Module 3 WIDE + Arducam CSI to HDMI

@DocWeebl made a fantastic Camera Module 3 case for the Raspberry Pi Camera Mount but I needed it taller to handle the stacked Camera Module 3 Wide + the Arducam CSI-to-HDMI board in the stacked form factor. I'm a newbie to this editing…

Pobrania
151
Polubienia
12
Ocena
5
P
PrintablesDouglas Hale

Arducam OV5647 5MP adjustable mount to 30mm aluminum extrusion

Assembled with 3mm bolts, freely adjustable. Confirmed works with autofocus and fixed focus versions of the OV5647.

Pobrania
149
Polubienia
15
Ocena
5
P
PrintablesAlexander

Voron 0/ Voron 0.1 Raspberry Pi Camera Mount for Arducam 16M Autofocus Module

Just as in johanncc's original, this model requires no supports. It's a minor modification, just making room for the extra module underneath the lens.

Pobrania
146
Polubienia
29
Ocena
5
P
Printablesltlowe

Arducam B0031 with M12 Lens Camera Case for Articulating Raspberry Pi Mount

It seems there are many many board sizes for Raspbery Pi cameras. Here is a case and cover for the Arducam B0031 with M12 lens to fit Sneaks' Articulating mount. I included screw holes in the mount, but the fit is tight enough with the…

Pobrania
144
Polubienia
17
Ocena
5
P
PrintablesAtle Berg

ArduCam Stand

Shroud / casing / stand for the Rev.C OV5647 Camera for Raspberry Pi. Same sensor as in the original (v 1.3) Raspberry Pi camera, but with a proper lens. More about this camera can be found here:…

Pobrania
140
Polubienia
7
Ocena
0
P
Printableshuberjer

Cover Lens for ArduCam 8MP IMX219 Sensor 175deg Wide Angle M12 Lens Articulating Raspberry Pi Camera Mount for Prusa MK3 and MK2

A Remixed Cover Lens for a Raspberry P1 Camera V2 board with an ArduCam 8MP IMX219 Sensor module (for RPi and Jetson Nano) with a 175deg Wide Angle M12 Lens. I included the Step file for your remix convenience.

Pobrania
137
Polubienia
6
Ocena
0
P
PrintablesBluecornNM

Arducam Noir adapter for Articulating Pi Cam Mount

I really liked this camera mount, but I prefer a different cam. Arducam Noir is a 5mp cam with no IR filter, so it does really well in low light at the sacrifice of color fidelity. At any rate, this prints really easy and snaps right on…

Pobrania
134
Polubienia
19
Ocena
0
P
Printablesorangetruth

Arducam 16 MP Autofocus Camera 2020 Extrusion Mount for Voron Trident

This is a 2020 extrusion mount for a 16 MP Arducam Autofocus camera customized for my Voron Trident. Mount it in this order: Use an M3x8 SHCS and an M3 hammerhead nut to attach the 2020_extrusion_mount to the extrusion. Use an M5x12 BHCS…

Pobrania
133
Polubienia
23
Ocena
0
P
Printablese1miran

Ultra small Pi Zero Case for 120° or 160° Pimoroni/Arducam Pi Camera Module (Frank-S01-V1.0 OV5647)

This is a remix of rin_ofumi's great case for the Raspberry Pi Zero and camera module with the “Frank-S01-V1.0 OV5647” designation. It's sold online by Pimoroni and on Amazon by Arducam. I added slots on the top/rear to allow airflow for…

Pobrania
132
Polubienia
18
Ocena
5
P
PrintablesZach Taiji

Arducam holder for X-Axis camera mount

Use with this mount: https://www.thingiverse.com/thing:2956323 Designed specifically for the Arducam, you can buy it here: https://www.amazon.com/gp/product/B012V1HEP4/ Cable (you'll need to buy a longer one than is provided with the…

Pobrania
131
Polubienia
5
Ocena
0
P
Printablesardichoke

Arducam OV5647 Case for Ender 3 Cam Boom

This is a case for the Arducam OV5647. It was designed to fit on this Cam Boom for the Ender 3, though it should be trivial to make other holders that fit it. The mounting hinge is sized for an M2 machine screw, and should be snug enough…

Pobrania
121
Polubienia
6
Ocena
0
P
PrintablesColorblinded

GoPro Mount and Housing for InnoMaker and Arducam Day and Night Vision Camera

Needed a housing for my InnoMaker day and night vision camera so I added opening in the housing to accomadate the light sensor and cable connection.

Pobrania
107
Polubienia
3
Ocena
0
P
Printablesrin_ofumi

Ultra small Pi Zero Case with Arducam 16MP autofocus camera for Tripod.

Happy 10th anniversary to the Raspberry Pi! <Description> Ultra small Pi Zero Case with Arducam 16MP autofocus camera for Tripod. PiZero_case_8_1_Zero_Case_withPiCamera_Top is Top Case.…

Pobrania
103
Polubienia
14
Ocena
0
P
PrintablesGizzo82

Arducam HDMI for Prusa Enclosure

I created a CSI/HDMI adapter port for my Prusa enclosure and a Raspberry Pi camera Print instructions printed with PET and 0.15mm layer height

Pobrania
101
Polubienia
5
Ocena
0
P
Printablesfivesixzero

Case for Arducam UC-733 Raspberry PI HQ Cam USB Adapter Board

A simple case for the Arducam UC-733 board. The Fusion 360 source file is included to make remixes easier. Hardware Required This was designed around some basic hardware from McMaster Carr but their mesaurements are pretty standard and…

Pobrania
99
Polubienia
12
Ocena
4
P
PrintablesHendrik Tafel

Arducam CSI-to-HDMI Adapter mount

Arducam CSI-to-HDMI Adapter mount. I used VHB tape to stick in the electronics bay of my Voron V0 Used hardware: 4x M2x5mm self tapping screws

Pobrania
99
Polubienia
9
Ocena
0
P
PrintablesJohnnyricoMC

Arducam Raspberry camera enclosure

This is 4AM Engineering's bracket for Arducam raspberry pi camera modules modified to fit Bogdanko's excellent Prusa camera mount. I designed it to fit my Arducam B0152 (8MP noIR fisheye) module, which is fitted to my printer's Y axis.…

Pobrania
99
Polubienia
5
Ocena
0
P
PrintablesD.R.racer

Arducam B0205

These are the source files for my Arducam B0205 flexible mount project, please read the full story at http://www.drracer.eu/3dp/20201115_arducam Disclaimer: The attached 3MF files have been optimized for my MK3S to print fillamentum's…

Pobrania
96
Polubienia
6
Ocena
1,5

Arducam B0506 Camera Housing and Arm

This is a revision of the camera arm that Boogie had provided to serve as a base for people's own designs. I extended the length of the camera arm and added a bend to create a viewing angle. It should be printed in PETG at 30% infill; if…

Pobrania
95
Polubienia
3
Ocena
0
P
Printablessraj

ArduCam Camera GoPro mount

normal, PLA, PETG, …

Pobrania
95
Polubienia
7
Ocena
5
P
PrintablesSirKeldon

Sovol SV06 Pi Camera/Arducam Solution

Summary I present to you a simple solution to hold a Pi Camera on the SV06 right X-carriage mount so you can control your print while the Z is raising, it consists of a simple mount that snaps onto the carriage and serves as a holder to…

Pobrania
93
Polubienia
11
Ocena
0
P
Printableshell_razor_art

Arducam Mini Case

If your Pi cam wasn't cutting it and you switched it out for a modular Arducam but couldn't find the right case, heres a new look on a solution you may have seen for the pi. Adjusted for an Arducam, this case and mount fits the base…

Pobrania
92
Polubienia
5
Ocena
0
P
PrintablesPim B

remixed back camera holder for Arducam 16MP case

I liked the design and the effort that there are many parts for the cam holder. Also has the original creater step files included. I had a Arducam 16MP autofocus. It came in it's own case. Which I liked also very much. So I took the step…

Pobrania
90
Polubienia
7
Ocena
5
P
PrintablesJannisJFry

Arducam IMX219 USB2.0 Mount

A mountig enclosure for the Arducam IMX219 (SKU:B0196). It has a clamping feature, that it can be used as a webcam. The middle part of the arm now has two wings to avoid tilting. (Bein(2).stl) To assemble it, you will need 1 M3x15mm Screw…

Pobrania
88
Polubienia
4
Ocena
0
P
PrintablesWalter Layher

Camera mounts for RaspiCam V3 and Arducam 16MP for Original Prusa Enclosure

I used the step file from the original model to adapt it to fit the PiCamera V3 module as well as the Arducam 16MP module. I also lifted the camera position by 40 mm, because I did not want the frame extrusions under the print bed in the…

Pobrania
83
Polubienia
10
Ocena
5
P
PrintablesBen Davies

QIDI X-Plus 3 Magnetic camera mount for Arducam OV5648 5MP usb camera

Mount for a camera for the QIDI X-Plus 3. The camera is an Arducam 5MP USB camera from Amazon. Arducam 5MP Wide Angle USB Camera for Computer, 1/4" CMOS OV5648 Mini UVC USB2.0 Video Webcam https://amzn.eu/d/7XNr6zw Uses 2 high-quality…

Pobrania
82
Polubienia
9
Ocena
4
P
Printablesx0pherl

Arducam Day / Night (B0205) case and swivel mount with Prusa & 3030 (Voron) brackets

***********IMPORTANT NOTE, THIS IS AN OLDER / UNMAINTAINED DESIGN******** I recommend you get the newer version which has many improvements: https://www.printables.com/model/1097162-swivel-mounted-camera-arm-mount-collection-for-pru the…

Pobrania
81
Polubienia
15
Ocena
0
P
PrintablesJustin B

Arducam Case

Enclosure for the B0205 2MP Automatic IR-Cut Switching All-Day Image USB2.0 Webcam with IR LEDs Made to hang from the frame of my Type A Machines Series 1 3D Printer. Some support required for the front plate. Four tiny screws are…

Pobrania
78
Polubienia
8
Ocena
0
P
PrintablesSenior6588

Arducam Front Face

Arducam has a pcb that is slightly thicker and a lens with less tolerance. This $10 from amazon for example: https://www.amazon.com/gp/product/B012V1HEP4. This front plate has slightly shallower supports to compensate for the larger pcb…

Pobrania
76
Polubienia
7
Ocena
0
P
Printablesnobody at all

Arducam 16MP IMX519 Voron corner cam

Resized the model to work for the Arducam 16MP w/ the Sony IMX519 sensor. You'll still need the original corner mount, from here .

Pobrania
75
Polubienia
1
Ocena
0
P
PrintablesPumpkinSouffle

Mini+ Z-axis Motor Mount for Arducam Day-Night Vision Raspberry Pi Camera

Rough prototype remix of two existing projects: https://www.prusaprinters.org/prints/45962-prusa-mini-mini-raspberry-pi-camera-module-v21-8mp https://www.thingiverse.com/thing:3402755 Parts: The Arducam night vision pi camera on Amazon…

Pobrania
74
Polubienia
6
Ocena
0
P
PrintablesDiablo3dfx

Ender-3 V3 SE Camera Mount Arducam for Raspberry Pi UC-261 Rev. C

This is only the file for the camera holder. Be sure to download the mount file from my remix source at https://www.printables.com/model/725402-ender-3-v3-se-camera-mount/files . Then be sure to read the sources source model info,…

Pobrania
74
Polubienia
4
Ocena
0
P
PrintablesHenry Levesque

Case for Arducam Camera Module for Raspberry Pi

A snap-fit Raspberry Pi Camera case.

Pobrania
74
Polubienia
2
Ocena
0
P
PrintablesLordMelkor

Face Plate for Arducam 8MP Wide Angle

This is a remix of the Raspberry Pi Camera face cover from the Articulating Raspberry Pi Camera Mount for Prusa. This supports the Arducam drop-in wide angle replacement for the Raspberry Pi Camera v2. See:…

Pobrania
73
Polubienia
8
Ocena
5
P
PrintablesJKat3

Arducam 1080p Day Night USB Camera Case

This is an enclosure for the Arducam 1080p Day/Night USB camera . I needed to make a baby monitor for someone and had a raspi zero 2 and arducam to get started . Here’s an enclosure that uses (4) 16mm M2 screws and heat inserts. My board…

Pobrania
71
Polubienia
2
Ocena
0
P
PrintablesR3DPrintFox

ArduCam 16/64MP Camera Mount IKEA PLATSA

Arducam 16/64MP Camera Mount for IKEA PLATSA 2x Screws 4,5 x 16

Pobrania
71
Polubienia
9
Ocena
5
P
PrintablesPandorify

Arducam OV9281 Camera Mount - 37mm Lens Filter Attatchment

This is a mount for the Arducam OV9281 UVC USB, It includes a 37mm lens filter thread, so you can add a filter over the lens to keep it from being damaged in competition, or to filter out light glares. I found that the original lens of…

Pobrania
70
Polubienia
5
Ocena
0
P
PrintablesThefrankenator

ARDUCAM 8K GOPRO MOUNT

I modified Jacob Thompsons Arducam case to make it the same height as a gopro mount. Then I added the gopro compatible legs for the bolt and mirrored it. this fits perfectly with the Arducam 8k that i got from Amazon…

Pobrania
69
Polubienia
10
Ocena
0
P
Printableshernsl

Arducam IMX219 Front Cover for Corner Cam (Voron 2.4 Mod)

This is a remix front cover for the picam corner cameras for Arducam IMX219. As of this submission, there is a corner cam and a mirror corner cam for the Voron 2.4. The front cover does not fit the Arducam 8MP IMX219 variant so this…

Pobrania
69
Polubienia
2
Ocena
0
P
Printablesx0pherl

Arducam day/night cam (B0205) mounting arm and case

you probably want the newer update to this: https://www.printables.com/model/497457-arducam-day-night-b0205-case-and-swivel-mount-with which addresses a few issues! Should be pretty straight-forward to print & connect. The back plate will…

Pobrania
68
Polubienia
8
Ocena
0
P
Printablesrobonxt

Arducam Pi Camera Case/Holder

I really like pellcorp's "Simple PiCam v1.3 mount" , but it was too tight to fit an Arducam 5MP Pi Camera. I broke my camera's LED trying to fit it in, so I thought I'll make one myself. While this was designed from scratch, I've taken…

Pobrania
67
Polubienia
9
Ocena
0
P
Printablesbomtarnes

Minimal Arducam 5mp mount

I was quite frustrated with the complex camera mounts available for my voron v0.2. The stick format this camera comes in is fairly popular, but the arducam 5mp didn't quite fit existing options.

Pobrania
67
Polubienia
8
Ocena
0
P
PrintablesMaffooClock

Arducam B0268 Mount for Voron 2.4 (and others)

This is a minimalistic enclosure and mounting solution that I designed to mount my Arducam B0268 for my Voron 2.4, although it could very likely fit a variety of other printer frames. This camera is perfect for large printers like the…

Pobrania
65
Polubienia
8
Ocena
0
P
PrintablesJazzy_Plz

Arducam for Raspberry Pi Camera OV5647M12 Board Mount, GoPro 2 Prong Edition

I cobbled this together in TinkerCAD because it is a PAIN in the butt to find a camera mount for this specific board (the 36x36 board with the screws on each corner...) so! I made this! I jacked the mount point from one of the camera…

Pobrania
64
Polubienia
5
Ocena
0
P
PrintablesTheVoronModder
Pobrania
64
Polubienia
13
Ocena
5
P
PrintablesRuben U

Arducam OV5647 B0033

For the stand use Organic support in PrusaSlicer 2.6. I've printed in PETG, Layer height of 0.2 mm, 15% infill on a Prusa MK3S+. Textured build plate. Needed hardware: (2) M3 nut (2) M3 square nut (insert square nuts before closing the…

Pobrania
62
Polubienia
3
Ocena
0
P
PrintablesAllie

Voron 0.2 Arducam M12 Wide Angle Lens USB Camera Mount

I couldn't find a Voron 0.2 mount for the Arducam usb cameras so I made one in FreeCad based on HerrBatman's design.

Pobrania
59
Polubienia
4
Ocena
0
P
PrintablesACDorkitect

Arducam Camera Housing and Mount for Original Prusa Enclosure

Arducam 8MP USB camera module housing and mount compatible with HeyVye's Modular Mounting system. I have included a stub arm for use with the Original Prusa Enclosure, or any other enclosure that can use a M3 through bolt. The Arm Axis…

Pobrania
59
Polubienia
8
Ocena
0
P
PrintablesTibee

OpenScan Mini Arducam IMX519 Back Cover with vent holes

Remixed Dana's back cover for the Openscan Mini, to provide some ventilation for the electronics. I printed this in ABS, 0.2 layer height I didn't use supports, some minor sagging on the outer edges, but it turned out OK. Depending on…

Pobrania
58
Polubienia
5
Ocena
0
P
PrintablesSaLei

Arducam CSI-to-HDMI Adapter bracked

Idea is to use double sided type to fix pcb to Raspi case (in my case it is armor case). To not bother with tinny screw holes on pcb and finding screws for that, I used 1.75mm filament.

Pobrania
57
Polubienia
5
Ocena
0
P
PrintablesOrdinaryWonder

Voron V0 Arducam Mount (IMX219 UVC)

Source: https://cad.onshape.com/documents/8e32626565cbbeef5e4cd8d3/w/b09365e8f3eeb6319f5a1b46/e/11d4dc9550a5c0cac525a516?renderMode=0&uiState=64aaf63abe953312f726ec55

Pobrania
57
Polubienia
6
Ocena
0
P
PrintablesBenjamin Sturm

ArduCam Mount - AnyCubic Kobra Neo

Camera mount for the Arducam B0176 for use with AnyCubic Kobra Neo PEI plate mounting. Slip the model over the lip used to peel the plate from the bed. Perfect angle to see print nozzle and watch prints in Octoprint.

Pobrania
56
Polubienia
10
Ocena
0
P
PrintablesJuanSolo

Arducam UC-261 ball mount

This is a remix-of-the-remix of thing:4601248 by smarc....who remixed this cam mount from lab27 thing:3121052 "Prusa I3 MK3 Raspberry Pi Camera Mount" I actually used this with the remix of that mount by inomad360 thing:4514535 so the…

Pobrania
55
Polubienia
1
Ocena
5
P
Printablesxwing

Support for Arducam TOF

Arducam TOF camera support, print with 0.2 layer in PLA or PETG

Pobrania
54
Polubienia
2
Ocena
5
P
Printablesmomodamonster

Arducam Case Housing with GoPro Mount

https://www.thingiverse.com/thing:5181195 Print Settings Printer: Ender 3 v2 Rafts: No Supports: Yes Resolution: .1 Infill: 36 Filament: Polymaker Polylite ASA Black Notes: I cobbled this together to make this work with this make; This…

Pobrania
54
Polubienia
4
Ocena
0
P
Printablescompbrain

Arducam CSI-HDMI Housing

This is a remix of "RPI Cam + Arducam CSI-HDMI" by nperto on Thingiverse that rotates the attachment 90° and attaches to the opposite side. Designed to work with the arm/pivot from…

Pobrania
54
Polubienia
7
Ocena
0
P
PrintablesRyan

Arducam CSI to HDMI Cable Extension Module Mount

I purchased an Arducam CSI to HDMI Cable Extension Module online and needed a way to mount it to my pi camera case. Designed this small piece that glued to the back of the camera case and then provided a place to screw the module to. Not…

Pobrania
53
Polubienia
0
Ocena
0
P
Printablesaveluru

Arducam B0205 IR Case + GoPro Mount

Designed for Arducam B0205 Printed without supports with the flat edge facing downwards. All parts are tolerances by 0.25mm and fit together nicely I originally designed the case to snap together with pegs that go through the Arducam…

Pobrania
50
Polubienia
6
Ocena
0
P
Printablesvinay kairam

Arducam for Raspberry Pi

Arducam for Raspberry Pi Camera Module 3 Case, ABS Housing for IMX519 16MP Autofocus Camera, Compatible with Raspberry P

Pobrania
49
Polubienia
6
Ocena
0
P
PrintablesMcBig

Arducam B0200 printer mount

This model is inspired by Michal Fanta and arm is based on Original Prusa I3 z-axis-top model. It is possible to use with Raspberry Pi Camera and with Arducam and other USB cameras where is possible disconnect and connect the USB cable to…

Pobrania
48
Polubienia
3
Ocena
0
P
PrintablesGizzo82

Arducam HDMI Adapter for LACK Enclosure

I already make a HDMI Port for the IKEA LACK top, and this ist the part to place under the printer Print instructions no supports needed

Pobrania
48
Polubienia
5
Ocena
0
P
PrintablesSi_22

Arducam with M12x0.5 lens mount

This is a mount for the larger Arducam with the M12x0.5 lens attached. I've designed it to attach to the Flexible camera mount for Ender 3 Pro: https://www.printables.com/model/199574-flexible-camera-mount-for-ender-3-pro The mount comes…

Pobrania
47
Polubienia
3
Ocena
5

Arducam Tube Mount

This is a rather simple part designed to allow you to mount an Arducam global-shutter camera such as this one on a piece of 1x1" punched tubing . It's designed for this case designed by FRC team 3295. The design is fully parametric, so it…

Pobrania
46
Polubienia
2
Ocena
0
P
PrintablesTD

Arducam, Pi Camera Mount for Prusa MK3S (MK3S+)

The wire holder was modified to a closed loop, designed to secure thinner cables and maintain a tidy appearance. Print as is, NO SUPPORT NEEDED. I use PETG Hatchbox. This remix includes the X-Axis cable strain relief and without it.…

Pobrania
43
Polubienia
4
Ocena
0
P
Printablesd3vnu1l

Arducam 1080P IR Camera Enclosure

Snap fit enclosure for this camera: https://www.arducam.com/arducam-1080p-day-night-vision-usb-camera-2mp-infrared-webcam-with-automatic-ir-cut-switching-and-ir-leds.html Print Settings 0.2mm PETG, 15% infill (default quality profile in…

Pobrania
42
Polubienia
3
Ocena
0
P
Printablesnoob_42

Cl4p-tp Camera case for arducam

Arducam case made from a Cl4p-TP model with slot in back lid for cable to go through. A few rough spots left to figure out but works great. Will need some hot glue to help hold camera module in place for now (working on a different…

Pobrania
42
Polubienia
6
Ocena
0
P
PrintablesBrightGecko

M7 sensor lens casing for OV5647 (ZeroCam / Arducam)

Replace the original M6 threads on the OV5647 sensor (Arducam/Zerocam) to M7 threads with this casing. Before changing the threads, you need to remove the original M6 lens casing from the OV5647 sensor body. To do this, you can carefully…

Pobrania
41
Polubienia
1
Ocena
0
P
PrintablesDr.D

Prusa Mini Nozzle cam mount (Arducam OV5647 w. M12 lens)

I made this camera mount for my Prusa Mini+ and 5MP Arducam (https://www.amazon.com/gp/product/B0867C9SZP) Thanks to @andimoto I used a similar way to mount to the nozzle fan. This camera plugs directly into a Raspberry Pi running OctoPi…

Pobrania
40
Polubienia
16
Ocena
5
P
Printablesj____t_____

Raspberry Pi Cam Arducam Mount for 2020 Extrusion

This is a quick remix of Seabird HH's wonderful Raspberry Camera Bracket but adapted for a 2020 extrusion. The mount is secured with a M3 bolt and T-nut on either side of the extrusion. I didn't run the ribbon cable in the example image…

Pobrania
40
Polubienia
2
Ocena
0
P
PrintablesRedstoneCool

First Tech Challenge Arducam Case

This case is designed to facilitate the mounting and protection of the Arducam B0332 camera along with other Arducam cameras that share the same footprint. The case is specially designed for use in FTC and aligns to an 8mm grid pattern.…

Pobrania
36
Polubienia
1
Ocena
0
P
Printablesjpkelly

Arducam Day/Night camera holder

Mount for Arducam 1080P Day & Night Vision USB Camera

Pobrania
36
Polubienia
4
Ocena
0
P
PrintablesVACInc

Arducam Cap adjusted for square PCB

Remix of the Arducam cap/case for the pi camera mount to account for a square PCB

Pobrania
35
Polubienia
1
Ocena
0
P
Printablesclevercode

Adapted Faceplate for Arducam and USB

Amended faceplate to fit https://www.amazon.ca/dp/B098L7WJ4C?th=1 USB splitter ports

Pobrania
33
Polubienia
2
Ocena
0
P
PrintablesJim

Pi Zero Case for ArduCam Auto Focus

Love the original model. But when I upgraded the Camera to a motorized focus model, the Camera would not fit; It's slightly larger that the standard fixed focus camera. This is used with any of the Case Backs available in the original…

Pobrania
33
Polubienia
5
Ocena
0
P
Printableszeal

Arducam Case

I tried the original model, but the case was larger than the model of Arducam that I had, and I didn't have any spare M2 bolts on hand. So I remodeled the case to fit the smaller model Arducam OV5647 (the one without a lens). This is the…

Pobrania
32
Polubienia
4
Ocena
0
P
Printablesburgersquid

Arducam bracket for Bluerov

Allows the use of an Arducam camera module with Bluerov's Subsea Camera Tilt System . Or really any project where you want to use an HS-5055MG servo to move an arducam around. The inside of the mount point is not splined (like the servo's…

Pobrania
32
Polubienia
1
Ocena
0