Liczymy pasujące modele…
I wanted a custom hook with a larger than normal hanger for bag loops and a clothes horse that needed taking up off the floor in a cupboard. I wanted the lip to lean outward to make it as easy as possible to locate things on the hooks. So…
I have an Elegoo Neptune3 Pro which has a tubular spool holder with just an edge lip to prevent the reel falling off. Works fine, until I bought some GiantArm Clear PLA because I wanted a PLA that's as clear as possible and the GiantArm…
I used PLA+ with 0.12mm layers and 0.4mm nozzle. No support or adhesion. Any infill fine. This is my less-used plip so I didn't bother doing much tidying up on the top of the buttons, just a bit of light sanding and polishing, so the…
The legs are rather delicate so they're in proportion with the dragonfly. I printed mine at 10mm/s for the 1st layer to really get it nailed down, then 60mm/s is fine for the rest of the layers. I used “initial layer line width” of 100%…
My Toyota Avensis battery compartment cover has a badly made plastic wingnut which I think is designed to be shoved on in the factory for sheer speed, and then unscrewed to remove. The only contact between the nut and the threaded shaft…
If you draw a circle on an x/y plot touching both axes, the distance from the origin to the centre of the circle is R+L, with L being the distance between the origin and the nearest point on the circle, and R is the radius. With a bit of…
Just a simple peg you can hand-screw into the ground. Standard print settings apart from… 5 Walls 30% Lines infill Slow 1st layer (I used 20mm/s and then 60mm/s for the rest, 60 being my printer's max) Support “everywhere” with overhang…
The STLs have been sent to Cura and then exported. I exported them as STL binaries, but also as 3MF files, use whichever you wish. The 3MF for the Chain Base Mount includes my setting overrides, which just turns off buildplate adhesion…
The Rod Sloth is a brilliant cleaner for Z-screws… https://www.printables.com/model/605305-rod-sloth-fits-most-3d-printers I have a Honeycomb Storage Wall so designed this holder to store the Rod Sloth on the wall by my printer. I used…
No special build instructions for this main body. The low profile nut only has two lines (circles) in contact with the printbed - mine stuck fine during printing but I added a 2-line skirt to reduce the chance of nozzle-snot messing up…
Inspired by the wooden version at https://www.instructables.com/Tiny-Tree-House/ as I made one of those when I saw that article, I wanted to see if I could create the same sort of thing for a 3D printer. And here it is. Sadly I don't have…
Visit the designer's Thingiverse page (beardofzeus - in the link from this model page) for his original summary and images, and to see other makes. In one of the comments he discusses how he sketched the roof which is spectacular. He…
You can buy these for about £6 in metal, but if you'll like to print one then try this! Costs about 5p :o) The graticule scale isn't terribly important because all that matters is that the tip point is at the same distance from both sides…
Styled on the cheap tools you can get from supermarkets, but this costs about 13p to print and if you break it you just print another :o) Works fine for separating out young seedlings for potting on or planting out in the garden. I used…
I found this attractively-designed bee on Thingiverse just after buying my first 3D printer. At the time, I only had white filament so I had to colour the coloured bits with Stabilo permanent markers! It came out pretty well but I wasn't…
UPDATED - V2 NOW AVAILABLE IN REMIXES. You'll still need nut/bolt info from this model but if you want the TPU bar clip version then get the STLs from the V2 remix. ============================================================ This is…
You're out at a restaurant, and you got the wonkiest table. Moving the table just made it worse, hahahah! Folded paper napkins never seem to quite do the trick. Everything else you might be able to use is of course at home or in the car.…
I used PLA+, 0.2mm layers, 0.4mm nozzle, no adhesion or support, full speed (on my printer) 60mm/s, 15% infill. Settings not critical, unlike the main model which has very specific layer and base layer thicknesses. The edges are all…
The snag with marking a centre using a side-edge is that the line you draw is offset from the edge by half the width of the pencil lead, and that could cause a significant error. So I went with a slot whose centre is the desired line, and…
If you want to seal up a spool of filament with a hygrometer display in a vacuum bag, where do you put the display? At first I thought of mounting it in the spindle hole, but my filament spools all have solid tubes for the spindle hole so…
Mods to adapt original to work with 4mm rope and Shore95A TPU
When your car is as old as mine, which is 20 years, it may be consuming oil between services! I don't have any external leaks or smoky exhaust, it just consumes a few litres of sump oil in the 12 months between servicing, so I have to…
Lovely original design - get all the other parts from the linked original. I also gave the bolt sizes (difficult to read in the diagrams there) and my assembly instructions in the “Make” comments there. In the original, Part5 is the…
When I was mending our tumble dryer, I noticed a load of “messages” had been left behind by mice which must have been using the vent as a dormitory! So rather than block off the vent and leave the dryer unusable, or have to wait until I…
I wanted to make some large rustic plant signs that would survive harsh weather. Rebar is cheap, I picked up some 10mm from my local metal supplier and chopped it up and filed the ends. They rust like crazy but they're so thick that…
I've run out of space, really :o) I have a pack of double-ended Fine/UltraFine Sharpies which were cluttering up my desk or drawer or shelf depending on how tidy I was trying to be! Neither was satisfactory, so I designed a rack that…
I printed these accessories at 0.1mm layer height with 0.4mm nozzle. 2 walls, 12 top/bottom, 15% grid infill, no support. You can either print several baubles at once, very close together, or increase the minimum layer time (10 seconds+),…
TL;DR - Go straight to the printing and building sections! I normally print with Elegoo's excellent PLA+ filament as I've found it to be highly reliable and prints beautifully cleanly. But then I wanted to use a clear PLA filament, and…
Absurdly simple design. Just a tapered peg with a flat edge for easier printing! Dreadful original clip design, despite very sound bonding of the string into the clip and also a very nicely sewn loop at the other end. Spoilt by stupid…
I needed to be able to screw coach screws into the ground to act as pegs to hold guy ropes to hold up a 5m telescopic pole for a windsock and decorative items when flying my kites. This handle does the trick, and saves me carrying around…
I've always like Flymo lawnmowers and this is our current one. The weak spot though is the onboard cable clip which is supposed to hold the cable that runs between the grip switches and the motor. Usually after mowing I notice the cable…
PLEASE NOTE THIS IS DESIGNED FOR PRINTING IN TPU so that it can be thumped on its head without breaking it. The cap is a good snug fit on the delivery tip, I haven't tried it in PLA. I used 0.4mm nozzle, 0.4mm line width, 0.2mm layers, no…
This is a really great original design, replacing commercial shower head holders for a fraction of the cost. However I ran into a few difficulties with our heavy showerhead tipping down and a low grip on the vertical riser. The vertical…
The original model was 10cm, I made it 16cm. Prints very easily and you can duplicate the STL on the buildplate to make several at once. I used PLA+ 0.4mm nozzle 0,2mm layers with no adhesion or support, 20% lines infill and standard 3…
This is a lovely design which works really well with a wet mix of soil. There's a recipe if you google “bbc gardeners world soil blocks” and it should be the first result, but I can't include external links as I don't think they're…
I picked up this old 2-in-1 swivel-jaw vice at a tool sale for a couple of quid. It was very rusty so the first job was to dismantle it and give it a good clean, dress the anvil section and the jaws, lube it up with PTFE and put it back…
This is a rather “niche” project, but many years ago I bought a Rolson folding trolley which is great for carting bags of compost from the car to the other end of the garden. It has always bugged me that sometimes the wheels try to…
Designed for 95A Shore TPU (eg the excellent Eryone TPU, I have that in clear and black now) 0.4mm nozzle, 0.2mm layers, 4 walls and 100% infill. I also use a 2-line brim but spaced 0.5mm from the model ("brim distance", in Cura) so it…
If you use carbon fibre or fibreglass spars in your kites, usually you need some sort of end cap to prevent the end of the spar rubbing and eventually pushing through the fabric. Commercial end caps are usually PVC or similar rubbery…
Due to the way Fusion works on imported converted meshes, sometimes you get weirdness (and occasionally even impossibility), and this one is a good example of weirdness. It left an incredibly thin layer of excess skin on the top and…
Hardware required: 1x Hand-sewing needle 1.5mm diameter or more, and at least 21mm of useable length before the eye starts, or a stainless nail of the same minimum length to under the head. 1x M3 threaded rod at least 85mm long (and a…
These excellent grinders from WmBounds have lasted us very many years. They never clog up because there is no rough surface for powdered salt/pepper or oils to stick to, so they just never stop working. But they can be a little fiddly to…
If you have one of these clocks and the battery compartment cover has broken or been lost, just print this replacement. It's a tiny model, costs 1p to print and takes 3 minutes, but if the original part is gone then your battery won't…
An elderly relative had a new shower fitted some months ago, but brand not marked anywhere and plumber inexplicably can't remember which one he fitted, hahahahaha! Anyway, the issue is that the silly little tab on the knob simply isn't…
I tried cleaning the contacts with rolled up tissues, rags, cocktail stick, brushes, etc, nothing was ideal. So I designed my own tool for it. You can use it on its own to loosen up debris and then blow the loosened bits out, or you can…
Commissioned by a friend for his Lanchester's Lucas distributor, specifically the DVX4A but the Lucas part number 408945 is listed as fitting all the other distributors shown in the title of this model. Apparently there are a lot of those…
Following on from the repair of the top mount pad here… https://www.printables.com/model/805700-camera-mount-pad-replacement-for-v-guard-ct-228-tr … this time it's the bottom buffer washer that reduces the impact if you loosen the main…
Replaces disgusting steel screw which had rusted to hell and was always a nuisance to remove when servicing the toilet. I only did this as a joke, something to do in a few minutes on a filthy wet British Winter's day. I'd just replaced…
My metal diabolo sticks are over 30 years old but still going strong. They came with plastic grommets whose holes eventually widened out irregularly and I never found a supply of replacement grommets. Finally with a 3D printer I can make…
My father's old tripod, decades old but still very functional and nice to use. Rubber camera mount pad had perished and crumbled. This is for TPU, any make or Shore. Tricky to sketch the shape because of the curve, and the whole thing has…
It used to be possible to buy leaf grabbers that were slightly angled at the head (I think Gardman made them, but they've changed the design). That way you could pick up leaves that were a little further in front of you rather than right…
I don't imagine there are many of these showerhead holders still out there, but if you've got one and it's damaged and you want to try to repair it, try this! I think ours fitted the original tubing ok when we first had the shower fitted…
I got fed up with reprinting this model every few months when the bar clip broke! I tried a couple of adjustments to the shape but ulimately PLA (even the PLA+ which I use) is just a bit too brittle to handle deformation to place and…
IGNORE MY WIRING MARKINGS - YOUR WIRE COLOURS AND NUMBERS MAY NOT MATCH MINE! If you're doing the wiring yourself, follow the instructions in the kit. Our new Honeywell T4 Programmable Thermostat seems to assume there is a channelled wire…
Note that you'll get a nicer model than my photos, I've updated the F3D and STL for a round-ended handle and a “BONSAI MASTER” engraved motif :o) I've used a single bent nail for years for bonsai root raking to remove old soil before root…
In the original model there is only one mention of which way round to use it, and it's deep down in one of the comments. Apparently the marked route on the outside of the device is the FLUID channel for startup, so blow into the OTHER…
Hard to imagine a simpler design than this! Still, someone might look it up and see if it's been done before firing up the CAD program. If that's you - here it is :o) My tower extension is one of the ones with a dodgy light. I don't need…
I have a friend who enjoys restoring and using vintage radio equipment (and cars!). He's wanted one of these rather famous radio sets for many years and finally found one locally - they're incredibly heavy and unfeasible to post. To check…
I have a bonsai area in the garden with white chippings size 10mm+ that get messy with small leaves and other debris. Normal vacuum nozzles just suck up the stones even if I set the Vax to minimum and open the tube vent, so I had to find…
I've made various printed garden ornaments, this time I wanted a Robin :o) It's a bit smaller than a real robin, although you could scale it. I used PLA+ with 0.4mm nozzle, 0.2mm layers, no support or adhesion for the body and the peg BUT…
I wanted a hedgehog silhouette-style to poke into soil or flowerpots, couldn't find one so adapted an idea from a photo and here it is. First attempts at printing were troublesome as Cura wants to draw a load of fiddly bits first which…
These nice LED path/border solar lights are pretty water resistant on the top, and come with the black plastic widgets to create a mounting spike for pushing them into soil. We initially just put them on the path, not realising that the…
I usually end up gashing dents in my knife blade on the concrete step when trimming my hosepipe to fit a new connector or correct a leaking one when the hose has got weakened at the joint. It's also good to get a 90 degree cut (if you can…
I needed a quick fix for a little stub of bamboo which I use to secure a tensioning line for my pond netting because herons would otherwise eat all our fish! Problem is, I keep tripping over the line or trampling on the cane and snapping…
All standard settings, no support or adhesion needed, it's Print In Place so print it, and use it!
Black & Decker's Workmate Power Tool Table is a “Vintage Item” now, hahaha, I still have mine and it's still perfect apart from needing an offset hole. I originally had a Black & Decker router, but that was truly terrible so I picked up a…
Secateur springs can ping out and get lost if dropped or caught on a branch etc. The Parkside secaturs have a weird rubber insert which seems to serve little purpose other than to supply a locating pimple in the middle which could have…
Created for a friend who displays his car at classic car events. The TPU hook is sized for his window glass thickness of 4.65mm but it's not too critical. If yours is similar, then this model should do the trick. If you need a very…
Designed for XROS pods with 11.7x22mm in the lower part of the tank that will fit into the holder, the wider shoulder being at least 10mm from the base of the pod. I use XROS CoreX 3.0, but 2.0 is the same size and may well be the same…
I wanted a way to charge up my XROS 5 Mini without having to fiddle around with the charging cable and use both hands. The ultimate in laziness, but why not? :o) This is a bit "niche", I admit. Only the Vaporesso XROS 5 Mini will fit in…
Original design says to use cardboard for the piston head in the instructions. I felt this was going to be too flimsy and tricky to glue to the end of a 1mm rod. The design photos suggest the designer actually ended up using balsa wood. I…
To wszystkie aktualnie dostępne wyniki.
