Liczymy pasujące modele…
This simple tool helps find the proper offset for your Cartographer probe in relation to your nozzle tip. Having a 2.6-3mm Z offset is critical for reliable operation of Cartographer Touch (nozzle probling). The Y offset ruler is just a…
HalfManBear's shroud design but with multiple optimizations delivered in one package Thanks to Layer.Shifted for pointing out the airflow problems! Special thanks to @mcbabo for making the assembly illustration! 🤩 Do you like the design?…
Struggling with inconsistent first layers, wavy patterns, gaps between lines, nozzle digging into the build plate or leveling related error codes? Been told to adjust your z offset? Looked at your bed mesh and tried to adjust the bed? Not…
Right Angle Cartographer Mount This mount is designed to be used with the Cartographer 3D Right Angle V3 probe. This is a side mounted design, featuring zero Y offset, reducing the effects of Axis Twist . Help support my work with Ko-Fi…
AUG 2024 - V0/Printers for Ants: Do not print this!!! I hope to have a V0 compatible mount when finishing my Hex-Zero build. Carto/Beacon sits already very close to the bed, I didn't like how the stock probe mount had the risk of screws…
Cartographer V4 Shield here Cartographer V3 Shield Cartographer has a capacitor and a thermistor on the bottom and because of that every little hit can make them fall out If the thermistor is gone its fine, the probe can work without the…
After a lot of work with @JaminCollins we are ready to release the cartographer for the K2 Plus! If you would like to support my efforts, buy me a beer . I want to keep my projects free, and your support helps me do so. Getting this all…
Offset values should be set to: Max and Plus x_offset: 0. y_offset: 19. Pro and Non-Pro x_offset: 0. y_offset: 22. Please use calipers to Measure and confirm these values at time of installation, the cad says they should be correct but…
BOM: 1x - Cartographer Flat Pack 5x - M2 Heat inserts (Standard) 3.6OD 4.0L 2x - M3 Heat Inserts (Standard) 4.6OD 5.7L 2x - M3x8 BHCS 2x - M2x10 or M2x8 BHCS 3x - M2x6 BHCS 1x - ~3m total of 26-30 AWG stranded silicone wire For further…
So the instructions are really simple: Get the nozzle touching the bed (you can use a bit of paper to make sure of this) Then make sure the 2.6mm side of the tool can slide under the coil of the carto The 3mm should not be able to slide…
New nozzle to probe Y offset is now 21.65mm instead of 22mm.
Remixed the shroud to cover the Cartographer and added a simple cable guide for a USB cable with about 3.2 mm in diameter. To use this shroud you also need the remixed Cartographer mount! - I have left the mounting position of the…
I wanted to use the Dragonburner on my Voron 2.4 with galileo (G2SA), cartographer and EBB. I also wanted to keep the endstop, but didn't like the original huge pilar. The MGN12H carriage has a wireduct for the endstop and cartograph I…
I wanted to use the Cartographer probe & CNC carriage with the A4T toolhead which requires removing ~1.8mm from the bottom of the mount. UPDATE: After some testing, it seems like removing the 1.8mm doesn't raise the probe high enough to…
this 2 part adapter allows you to mount your RB on a Cartographer CNC mount.
Thnx for @Balgerion for original model! Update: Version 2 of mount makes it 1mm lower, for better auto Z calibrations. It does require low-profile button head screws, regular DIN 912 cap head screws won't work. They have too big head This…
2024-10-21 added different height spacers, Carto should be 2.6mm to 3mm Z distance to the nozzle added Esoterical offset measuring tool from Carto Discord (Carto's coil pcb on the “hills” and nozzle on the long flat side) this is a remix…
This is a StealthBurner probe mount specifically designed for the latest Cartographer V4. It supports low-profile Cartographer V4 and MIGHT work with standart version, depending on your hotend length and mounting height( NO GUARANTEE )…
I've tried the original model and the remix. I found that the remix is not flush (at the bottom of the DB) because there is no room to route the BBL hotend wires. With this version : there is enough room for wires belts clamps are…
the adapter for original model did not sit flush with dragon burner so I have made multiple variations of this model with varying risers accommodated in the print itself. 0.4 to 1.6 mm , you will have to test varying thickness I would…
I ran with a Tentacool nozzle duct for a while, but noticed it was lacking in flow. I also needed a new setup due to me using a BD Sensor M, so I started working on a new simple duct system for my Artsy printer. Which also made it work on…
Redesigned from scratch. Improvements compare to original: 1. Fixed distance between holes: 31.5mm instead of 31mm 2. Fixed hole sizes for M3x3 heat inserts 3. Fixed thin walls by using part of Klicky probe mount 4. Reduced area which was…
The wires of the probe are a bit thick so I had to shave away some material where the hotend assembly and the extruder base meet.
This revission i moved the screws to the back, this will enable the ability to access the screws when mounted, I made more space to move the sensor up and down and I added a liddle handle to easy access the sensor for moving it up and…
A mount for the cartographer probe on the switchwire/enderwire. It's a remix of the x carriage and the belt grippers to provide clearance for the probe and wires. Mount requires two more heatset inserts into the bottom of the carriage and…
Official Skeletor MK7 Side Mounted Cartographer Support: https://www.printables.com/model/1362668-skeletor-mk7-side-mounted-cartographer-integration PSA 7/14/25 * If you're here to download the Right Angle Mount for your K1 Max please…
Cartographer3D Mount for Qidi Plus 4 ⚠This was a fun proof of concept to get Cartographer working on the Plus 4, but Stew's Beacon mount will serve you much better, please use that instead.⚠ I am leaving this page up as a resource to the…
Cartographer V3 Shield mod here Bambu Lab print profile Cartographer V4 Shield Cartographer has a capacitor and a thermistor on the bottom and because of that every little hit can make them fall out If the thermistor is gone its fine, the…
Cable guide for K1/K1 Max head. It use screw holes from Extruder and Lidar. It can be use with the extruder cover.
I noticed that PropFortress' Beacon mount lines up perfectly with the mounting holes on the Cartographer, but does not have clearance for the solder joints and the upper PCB. So I decided to try my hand at editing a model. This is my…
This is a mount for the Cartographer3d eddy probe. I used the standard probe but the right angle model would probably fit better. The original inductive probe mount location and hardware is used. two M3x5x4 heat set inserts are used for…
Updated model with thicker carto mount, brim and rounded corners to help with warping during printing. Also updated for Cartographer v4 You can adjust the mounting hole sizes and height of the PCB to tweak as needed with the VarSet…
Just a quick bodge together of the shroud by Chkathome for the custom "reversed" PCB mount and the factory Phaetus shroud for use with the DXC2 extruder. All the instructions for the the original applies here. My CAD skills are shocking…
Qidi Cover – Remix with Hex Pattern & Logo This version of the cover is compatible with Stew675’s project , which allows you to mount a Beacon / Cartographer 3D probe . This model is a remix of the original cover created by @Derek_2843290…
In version V2, the hole sizes have been optimized Simple AF Cartographer - repository thanks to which this model was created In version 1.1, the cartographer model was added(into step file), the edges were rounded. BOM: 2x - Heat Inserts…
UPDATE 4/5/24: Added another model for use with factory square-style flsun hot ends as the original model was made with the triangle labs hot end. UPDATE 1/26/24: I believe this will also be fully compatible with Cartography sensors as…
Description Cartographer v4 (Standart) Mount This mount is designed to be used with the Cartographer 3D v4 (Standart) probe. This is a side mounted design, featuring zero Y offset, reducing the effects of Axis Twist. Mounting The…
A simple upgrade for the stock shroud for Cartographer / Beacon. Unlinke the other files, this one fits for the Neptune 4 plus… Just print like is with suport and stick the side without screw with dubble sided tape or super glue. my…
Skeletor MK7 is finally here. After nearly two years of development, testing, and feedback from the community, the project has reached the point where I am comfortable releasing the files publicly. The amount of support, testing, and…
Want to show appreciation? Consider checking out my Ko-fi This is a fairly simple mod that joins the BTTEddy Mount remixed by @anavrin72_1904362 and joins it to the K1 D3vil Burner & Booty Burner cover by @MzTechnology_2076066 I have also…
This is a simple Cartographer V4 mount for the Creality K1 series printers. This mount allows access to the toolhead cover screw to make maintenance a little easier. Update 9/19/26 : Added a version with ribs to help stiffen the mount. I…
Made this because of my custom length hotend. I did not feel like cutting neither my CNC toolhead mount nor the Eddy itself, so I made an adjustable mount that utilizes Cartographer mounting hardware. You need some M3 bolts, two out of…
Add M3x5x4 Voron standard inserts to the holes (fillet side) and you are golden!
To maintain the original position of the nozzle and ensure installation on the cartographer cnc carriage without cutting, the mount was changed with an offset of 2.4 mm along the Z-axis and 7.8 mm along the Y-axis. The Bambulab hotend…
This is a remix of the “mini clip” from SHaDoW6. The biggest change was adding the cutout for the Cartographer USB cable to engage into. I also made the flanges a little longer to improve the grip. I noticed that the stock PTFE tube…
This one insert is capable of keeping a fully-expanded game of Cartographers organised. All the cards from the two base games (Cartographers and Cartographers Heroes) and all the cards from the six map pack expansions will fit inside a…
My first bigger project! This is a complete board for the game cartographers (Kartograph), but you still need to buy/have the base for the playing cards. This is still WIP as a few parts are not yet done (Box top, mainly). But the board…
🚀 Skeletor MK7 Side‑Mounted Cartographer Integration , the official drop‑in upgrade for your Skeletor MK7! Swap out your stock center arm and bolt on true side‑mount support for right‑angle & standard Cartographer probes—no extra adapters…
Cartographer/Beacon Probe Mount for Rapido UHF for Voron CNC/CL Tap, XOL2 Toolhead
Needed some clips to hold the usb cable for the cartographer probe. Made modifications to SHaDoW6's clips.
A modification of Esoterical's tool to determine the Cartographer probe offset with respect to the nozzle. This mod helps with printers that have the probe offset in the X direction rather than Y. See original tool description here:…
Summary: This is my second version of the Cartographer mount and shroud to install the cartographer PCB directly above the coil board. The goal was still to get rid of the spacers in the y-axis which are needed for the regular…
Summary: This is my version of the cartographer mount and shroud to install the cartographer PCB apart from the coil board. I wanted to get rid of the spacers in the y-axis which are needed for the regular installation. Because of the PCB…
This is an X carriage mount for Stealthburner for the MGN12 rail in the UHF/Volcano lengt Check your clearance to see if the specified ~2mm height difference to the nozzle fits (may vary depending on the nozzle)
I modified the beacon/carto mount as it was too close to bed/print. Two versions, -0.5 and -1mm with heatsert inserts. The -0.5mm worked for me as with the standard bracket the carto was only 0.2mm away from the bed. Print using standard…
A printed cable guide to the existing lidar cable for stress relief on the cable. Requirements: Removing the extruder motor cover 1xM3x8 or M3x10 for mounting into existing extruder motor mounts.…
(Untested) The name says it all
Stealthburner mount with added mounting points for a Cartographer probe (similar to Beacon). Also the XC0 mounting piece without the klicky probe piece (to make room for the PCB) Cartographer Probe should fit right in if you pick the…
This is an Insert for the german Pegasus version of the Cartographers. As the french version seems to have other dimensions the most inserts i have found would not fit. This Insert is for the inner box dimensions of 138 x 192 mm. Its…
See: https://www.printables.com/model/813810-elegoo-neptune-4promaxplus-fan-shroud-v5-with-beac for details. Only difference is that you can use heat set inserts to mount the beacon rather than screwing directly into the plastic…
I have NOT tested this to see if everything works properly yet! I included the STEP file in case anyone is way smarter than me in this regard and can correct any mistakes I've yet to realize. I have been working on getting all the parts…
So you have a K1 or K1 Max and you have all the big upgrades, including the Booty Call Jones linear rail, the Skeletor MK7 duct, and now you're trying to install a right-angle (or standard format) Cartographer3D probe. This carto mount…
The stock probe has the risk of the screws holding together the probe mount getting loose and the probe having measurements inconsistencies. This model is a remix that further improves the rigidity of the mount with a thicker top side.
build is exactly same as cw2. Knomi V1 untouchable is tested and is working fine, it should also be compatible with knomi v2 but it is not yet tested.
Added a cutout to be able to run a cartographer cable out to the front usb port.
Edit: You must remove the RGB, I2C, and PROBE pin headers on the EBB42 to fit the tested models. I desoldered the pin headers, but cutting them off with diagonal cutters is probably good enough. I added an untested version of the x0 arm…
I wanted a slim cartographer usb cable holder that will work with all extruders. Print in the orientation shown in the picture. Material: ASA or better Walls / Perimeters: 4 Infill: Gyroid / 20% Materials needed: M3x12 because of the…
remixed RapidBurner X Carriage MGN9H for Micron and Pandoras Box to include a mount for Cartographer or Beacon probe
Skeletor MK7 is finally here. After nearly two years of development, testing, and feedback from the community, the project has reached the point where I am comfortable releasing the files publicly. The amount of support, testing, and…
Mounting plate for StealthBurner for Elegoo Neptune 4 with mounting holes for Beacon3d or Cartographer probe. I currently use it for my Stealthburner with cartographer and volcano, rapido and TZ v2 hotends, so my Stealthburner a little…
Eine einfache Änderung am Stealthchanger Schlitten für eine Cartographer (Beacon) Aufnahme. Der Schlitten ist nach unten erweitert mit 2 M3 Einschmelzmuttern um den Carto zu befästigen Der Abstand ist für ein Revo-Hotend. Für andere kann…
Adds carto compatibility to 3.1 toolhead
The Cartographer 3D mount has been modified as it has two separate boards (processor and coil). The board with the chip has been moved further away from the hot bed. The coil and the board are connected by four wires. For mounting you…
This is a 2-piece front shroud to mount the Cartographer3d probe on the Creality K2. Thanks to JaminCollins k2-improvements script ( https://github.com/jamincollins/k2-improvements ) we got to ability to use the Cartographer probe instead…
Tool head seems to differ slightly from the X-Max, so using the original by Mc Sneaky seems to put the probe about 10mm too high relative to the tip of the nozzle. Print in the same orientation as Mc Sneaky's version. Uses the same…
I love the Cartographer 3D probe, but I had some trouble getting the offset configured correctly. While there’s an offset tool available, it didn’t quite suit my specific needs. To solve this, I designed a simple but helpful tool to…
I wanted to use the Rapidburner on my Voron 2.4 with galileo type extruder, cartographer and EBB36. Features: Wristwatch G2 extruder modified so it matches the shape of the cowl Combined the two hotend mounting plates and slightly…
Update 11/2025: Updated the brace so it does not interfere with the Cartographer connector. Also made a few more cable management cutouts for more routing options. I was having a hard time getting consistent results from my Carto/Beacon…
Target If you don't want to mess with the backside PTFE tube gasket, use this minimalistic lid raiser to route the Cartograpers3D USB cable to the external USB port. For all others who are looking for a lid raiser to stop the PTFE tube…
I wanted to create a mount that would fit with the standard x-carriage mount on the Voron. I didn't want to have to print extra parts unnecessarily. The spacing on the mount for the holes mounting to the x-carriage is 9mm. I have also…
I used the original model as a reference for dimensions. There are many differences from the original model. Thanks to the Bootycall Jones. I had trouble getting a good print of the original model. The overhangs and bridges were hard for…
DISCLAIMER: YOU ARE GONNA NEED TO CUT A SMALL PIECE OF THE ORIGINAL SHROUD OTHERWISE THIS WON'T FIT OR USE ANOTHER SHROUD DESIGN [ 955271-sv08-toolhead-cover ] Give this a read before you start and follow it to calibrate the probe […
Summary: This model is an addon for a Cartographer installation, e.g. like my model version 2 of the mount and shroud that can be found here. https://www.printables.com/model/1277242-k2-plus-cartographer-mount-and-shroud-custom-pcb-p I…
Version 2 is out now. https://www.printables.com/model/1384285-shroud-for-neptune-4-plus Took the V6 prototype from OrzOrzOrz and remixed it. Add cartographer mount and some cable routing. Put on a Tie Fighter design to the 5015 fan covers.
Printed with standart voron print settings
This model prevents errors during printing caused by poor contact when connecting the Cartographer via stock USB cable. Attach thin double-sided tape.
I redesigned the Beacon3D mount , making it fully compatible without requiring any printer modifications. All dimensions are preserved so the part fits within the mechanical limits. Many other mounts are slightly wider, which causes…
This is a remix of the standard EVA 3 Bottom Horns (non-Volcano hotends) with an integrated mount for the Cartographer touch probe using M3 heatset inserts. Key Features Drop-in replacement for standard EVA 3 bottom horns Secure M3…
* NEW VERSION - https://www.printables.com/model/1064760-neptune-4-and-4-pro-stealthburner-with-beaconcarto * Mounting plate for StealthBurner for Elegoo Neptune 4 with mounting holes for beacon3d or cartographer probe or original…
This is a double Horn cooler for EVA3 with a Mount for the Cartographer 3D or Beacon Eddy current probe. it suits all non volcano style Hotends. It features a clip to wire up a JST-PH connector for USB or CAN use.
I'm using a different hotend and there wasn't too much room to mount the Cartographer in the same way @Scotts3D did. I redisigned it to have: A new mount for MCU board. At the side or the Orbiter motor Reinforced coild board mount. As I…
First of all I recommend buying original model of ModulR from Zuff on cults.3d This is a great duct with sufficient airflow to print at high speeds using one 5015 fan. I have modded with author’s consent middle plate that is designed for…
This is my attempt at a probe for the cartographer that I just got home. I wanted something a bit more rigid than the current options, as it has to be very rigid for Cartographer Survey. I plan to add some wire guide option on the side,…
ENGLISH adaptater cartographer stealthburner SirStorm This is an adapter model for the SirStorm stealthburner support it allows height adjustment it is suitable for standard and flat versions v3 FRANCAIS adaptateur cartographer…
A simple and lightweight insert for Cartographers (Thunderworks Games edition), that will fit all the elements of the base game, as well as some colouring pencils/pens for all your cartographing needs. It's sturdy enough and uses only…
A remix of McSneaky's Carto mount to fit the standard profile version. Untested in action as I haven't installed it yet. But fits great as far as I've tested.
Just a simple remix of booty call jones linear rail carriage. It allows to use directly Libra extruder. No need to remove material from the carriage, simply print it directly to fit Libra (and Trigger - not tested) extruder. Update…
recreated from https://github.com/Cartographer3D/cartographer-probe/tree/main/STEP
This is a set of shapes for the board game Cartographers by Jordy Adan. I have played with some people who had trouble mirroring the objects in there head and drawing that on the sheet. I hope this can help others.
Cartographer V4 probe mount designed for the Sovol SV08. Print: 1x (Cartographer v4 Mount) 2x (3.25mm tall ID 3.2mm OD 6mm Spacer) (these spacers slide on the screws that came with your cartographer mount) Probe Offsets (add these to your…
