Liczymy pasujące modele…
I have .3mf files with my settings I've used over at Makerworld . To split the model into each individual object: (In slicer) Right-click model → split → to object Designed for a full size ATX PSU and a dual PCIe bracket GPU GPU size…
Inspired by the great designs already out there, I made this adaption with added 140mm fan and optional keystone module (to house a HDMI keystone passthrough). I found that the heat generation on the 13th gen i9 is too much and this case…
I have added an update to this. Please test out the new additions and let me know your results in the comments! Watch the video here where I explain the whole process. Most of the parts can be printed with PLA at 15% in-fil. All the screw…
Rack Mount for Minisforum MS-01. There are version 1 and version 2. Print using PETG, PETG (CF), ABS or ABS (CF) is highly recommended. Version 1 will be a bit tight at the ear (top & bottom) side and take up 1 and ⅓ U of rack height.…
Minisforum MS-A2 and MS-01 one piece case, designed for extra cooling. Original case used for modeling with Fusion360, with some measurement tweaked for better fit and to allow some tolerances when 3D printed. STEP file of the raw case…
Minisforum MS-01 MS-A2 MS-R1 Dual Rack Mount 2U This should also work for the MS-A1, thought the dimensions are slightly small in width and depth, but the height is the same, so it should hold them snug, you'll just have a few mm gap to…
I'm not sure that this fits the MS-A1. It looks like the same chassis but I'm not certain. Tolerances are tight for a snug fit PRINT SETTINGS I'VE USED: Nozzle: 0.4mm Layer Height: 0.2mm (Feel free to experiment and change what you like )…
This is a replacement bottom plate for the Minisforum MS-01, designed to accommodate a 140mm fan for improved cooling. The plate features precise cutouts and mounting points, ensuring easy installation and optimal airflow. To complete the…
My new PC is a Minisforum UM690S. Despite its small size, it is very powerful. However, the small computer has one drawback: the two case fans are quite loud and run at full speed constantly. Therefore, I opted for a small modification to…
Long story short - I got tired of waiting for a single-slot cooler option for the Intel Arc Pro B50 card to use with my MINISFORUM MS-A2 hosts, so I designed a replacement shell that fits the card in a dual-slot configuration, and added a…
19 inch rack bracket for minisforum ms-01 power supply this mounts to the side bottom of my rack enclosure No support material needed. Included is the f3d file
2U 19 inch rack front panel mount for minisforum ms-01 These panel mounts require the DAP 2U MP-1 bracket. Print the front panel mount on the front. No support material needed. Included is the f3d file
The Minisforum MS-A1 is an awesome low power motherboard case combo, but the cooler is weak and kind of noisy. The cooler mount is almost but not quite AM-5 cooler compatible. I made a mount to adapt the NH-L9a to the slightly smaller…
Revised Left side model 20260215 - Inner screw holes did not line up as intended. There is also a remix that fixes this problem in a slightly different way. See Link Below:…
This is a remix of Gear Seekers amazing design to rack mount one or two Minisforum MS-01 or MS-A2 computer. My main goal was to increase strength and rigidity of the design and also minimize the need for support material. Print vertically…
Bottom plate to replace the original one with a mount for a 140mm fan, together with a hole to pass the cable inside the unit. Original plate used as base for the design. 2 small supports are needed at the connection to the front plate of…
I wanted to mount a 140mm fan to my BD770i for additional air flow. However, the included bracket only allows for mounting of a 120mm fan. This mount allows a 140mm fan to be mounted offset to the I/O shield and bolts into the existing…
A simple rack to house one or more Minisforum MS-01 mini pcs. The rack is designed so that you can print as many layers as you need and connect them together. All ports and the serial numbers are accessible whilst in the rack. Add a top…
This is a custom-made mount for installing two Minisforum MS-01 mini workstations into a 2U 19-inch rack . The design ensures a stable hold and optimal ventilation and includes a lock mechanism to prevent sliding out. To assemble this…
Just a simple vertical stand for those with a Minisforum MS-01. Supports both orientations (cooling is not affected). Printing: This was printed in PLA (I used Polylite PLA PRO) with 5 walls and 25% Gyroid infill. Assembly: Pretty…
A quick Mod for the Minisforum MS-01 1U Rack Mount Kit Designed by Gear Seekers. Faceplate for 10" racks. Recommend PETG-CF for heat tolerance and rigidity.
To assembly, 1. pass the first wireless antena trough its holders on the back panel 2. slide the back panel into the bottom 3. install the board into the 4 holders (to avoid damage try to arch the panel instead of pushing the pilars) 4.…
Note: The “prx01” label on the front is not included in the design. Feel free to add your own hostname directly in the slicer. Print it face down with tree supports on build plate only. The design requires three M3x8 screws and nuts for…
Backstory: I ordered a datacenter Intel U.2 SSD before receiving my MS-01, only to realize once it got here that it didn't fit, with the ms-01 only supporting 7.5mm drives. I'm by no means a professional CAD designer and would like to see…
This is a different approach to rack mounting Minisforum MS series. Instead of holding the original casing, it replaces it, allowing 1U mount* for the machine Also features 2x keystone jacks and ears for a cable clip and a flush button…
I recreated a model sent to me by ThomAce Van Doom on the Minisforum Discord. Included is a Fusion 360 file which is fairly unoptimized, but it should be enough for someone to modify it to their use case. Included is also an example .3mf…
Print two of these vertical stands for your Minisforum MS-A1. Stays in place with the existing rubber feet on the computer case.
A bracket to attach the MS-01 power brick to a wall or the bottom of a table. Print two, they slide snugly onto the ends of the power brick.
Designed to fit the Lab Rax or any 10" serverrack: https://makerworld.com/en/models/1294480-lab-rax-10-server-rack-5u?from=search#profileId-1325352 No supports needed
The Minisforum ITX boards support an unusual hole placing for the cooler mounts, 52mm on the edges. The model by NAnglo uses a slighty wider spacing, therefore I needed to adapt it a little bit. Print with temperature resistant and robust…
Mounts a noctua 120mm fan to OEM minisforum 790S7 cpu cooler. Uses OEM screws to mount internal 4 holes to cpu cooler and M4 screws to mount fan OEM panel will also fit if foam seal is removed.
Basic stand for a Minisforum MS-01 to allow 6mm of clearance underneath for better airflow to the NVMe drives. In my personal testing with all three drives loaded, I got a 4-5c reduction in temperature.
Rack-Mount for the MS-01. It slides in and locks in-place similar to the original enclosure. In addition, three 60mm in the front (for me it's 60x15mm Noctua ones) provide additional airflow to improve cooling, especially for PCIe-Card(s)…
I wanted to optimize airflow for the BD790i inside my Fractal Ridge case. Played around with different fans and found out that the big NF-A15 and - even better - the newer NF-A14x25r do fit nicely in that setup. The new one even without…
Here is a small, yet sturdy, rack to support two (2) Minisforum MS-01 mini-pcs. I printed with the following: 0.6mm nozzle (0.42mm height) PETG-CF (for added support) - however, during prototyping: PLA/PETG (regular) worked incredibly…
The Fiserv Forum Stadium in Milwaukee, home of the NBA's Milwaukee Bucks, has been immortalized in this model. Fan's of the Bucks can enjoy having a mini version of the home of the 2021 NBA Champions. Once sanded and painted this model…
Couldn't find a Rack shelf for the MS-01 that fits in a 10" server rack so created my own. Prints vertically, and can fit small printers. My bed is 220x220x250 (K1 SE). As you install the MS-01 it is a tight fit as I didn't want it to…
Alternative Cover with improved ventilation for your MinisForum DeskMini UM350 mini PC. Use “Cut_Lueftung” as a modifier object in your slicer to remove top and bottom layers so that the infill comes out. Use different infill settings for…
This is an adapter to mount a noctua 120mm fan (each version should, e.g. for me NF-A12x25 fan) to a minisforum um 790 pro. This allows for super silent operation. For the assembly first unplug the power supply on your minisforum. Then…
Update: Added v3 STLs based on v3 update to original design. This only includes increased 0.2mm tolerance to MS-01 cavity since the original design v3 now includes 7mm holes
This simple print will let you mount your UM690 to a wall etc. It has a hole at the bottom for the vent. I've printed mine in PETG, 0,2mm Quality preset. 4mm holes, 69mm apart
This is a remix of Gear Seekers' well designed 1U Rack Mount, but with changes made for a three node Minisforum MS-01 Proxmox Ceph Cluster, I mainly wanted the rear I/O of the units to face the front of the rack, to make network…
The motherboard comes with 120mm cooler mount, which may not be optimal for some builds. A 92mm cooler is the same width as the radiator. Hardware needed: 6 screws for mounting the brackets to the radiator, they come with the motherboard…
The Minisforum MS-A1 is an awesome low power motherboard case combo, but the cooler is weak and kind of noisy. The cooler mount is almost but not quite AM-5 cooler compatible. This design adapts the NH-L9a to the slightly smaller mounting…
Simple reference model I took from the website Everything is based off of the a picture and scaled to the size of the USB port From Minisforum Website It's not good enough for a clearance fit But it will get you in the ballpark
A case mod that allows for use of off the shelf 4010 fans as a replacement for the fan and heatsink combo that ships stock with the EM680. The same screws from the original as well as the feet are reused. You will likely require a…
This model could help you to keep your UM series device cool, although you need to sacrifice the internal SATA connectivity. The modell can be used with or without forced cooling with 40 x 40 x 5mm fan, in vertical or horisontal placement…
This is a mix of an existing backplate already available here and a fan enclosure with grid and filter for the MinisForum MS-01. Not perfect since that was made on the fly. Note that in my case I use the fan as an air intake compared to…
I wanted a way to mount the Minisforum HX90 under my desk instead of having it sit on top. There are two M4x8mm socket cap screws screwed into inserts on the HX90. The computer is hanging with some short #12 screws. Printed using a .6mm…
This case was designed specifically for mounting a Minisforum HX99G to a monitor. I use it to keep my computer close to where I use it, but this mount keeps it out of the way, and if you use it the way I do then it acts as a monitor…
Update 25. Jun. 2021: fixed bug with only the sides rounded; this is also default now for better printing Description: This is a waterproof housing for the forumslader , a device to charge your USB device with the hub dynamo of your bike…
This simple print will let you mount your UM780 XTX to a wall etc. It is open where needed for ports and vents I've printed mine in PETG, 0,2mm Quality preset. 4mm holes, 69mm apart Unlike my previous model for UM690, I've made this model…
Minisforum HM90 downside cooling is a case thats attaches to the bottom of the minicomputer and holds two 2.5inch disks with a fan that cools all components from the bottom. If you want to recreate this you will need: 1x 140mm fan, like:…
The plate is 1 mm thick, which is a bit more than the sheet that comes with the computer, but it fits nicely. I printed mine at 0.2 mm and used some black PLA Unlike the original i haven't added any adhesive to hold the plate as its hold…
This is a custom 3D-printed stand designed specifically for the Minisforum HX99G mini computer. Unlike the original stand, which mounts from the back, this model is secured from the bottom using two screws. The design provides a stable…
These brackets should allow you to wall mount (or desk mount) your Minisforum MS-01. The model comes with cutouts so they don't interfere with the default silicone feet on the MS-01. I have also included small cutouts where you can place…
I wanted to install a 2.5" 5tb HDD into this newer mini-pc, but the darn thing was too small. With the power of Fusion 360 I modeled an adapter to accommodate the extra girth. You will need longer M2.5 screws. I have texted M2.5x20mm…
In the original design, the Blankside could not be installed into a 19-inch rack because the mesh extended too far over.
This is a release of love. Minisforum has a really fun and removable "push" grab lid. It's easily removable. I'm working on a project that requires the M.2 slot to have a PCIe Riser Card pop out of the machine and allow me to hook up a…
This is my case design for a Minisforum V3 Tablet, designed to be printable on my Creality K1C's 235x235 print bed. You'll need to print: 2 back plates 2 frames 4 feet 2 clips The back plates need to be glued to the frames, I used super…
I've been busy assembling my HSW and the various mounts I needed, and noticed that there wasn't a mount already available for the mini PC I use as a software development server. The model includes the word ‘FRONT’ on one side - this is,…
This is an inlay/organizer for the board game Forum Trajanum by Stefan Feld. The whole design is inspired by a design by former Thingiverse user "tvkili" whose account is sadly no longer available. His things were under the license…
Bottom Cover Plate for Minisforum UM773 PC's, for better Airflow and Cooling. Needs M2.5*12 or longer Flat Head Screws. No Support needed.
A 1U bracket to mount a Minisforum GK41 in a 10-inch rack I designed and printed the Skeleten , a 10-inch rack to house my homelab. I wanted it to contain everything I needed, except maybe a NAS. From top to bottom: 2U - Vented TP-Link…
Simple Underdesk-mount for my Mini-PC ( Minisforum U820 ).
I really dont like the magnetic folding stand that comes with the V3 and wanted something i could just set it down on that would hold it up and not need to attach the magnetic one. Can be used with or without the keyboard attached and…
See updated model here - This fits rack appropriately and is much more rigid/stable with active cooling. Warnings: Due to the MS-A2 back plastic frame it will never fit in a 1U unit perfectly. If you have a tight space or are stacking…
This adds an 80x10.7 fan to the UM690 minisforum for cool off the NVME and Memory. This design will reuse the bottom of the PC and it will snap together. It's a two piece design that needs to be glued together. The buck converter takes…
Rack mount for Minisforum UM890 Pro
This backplate was created to keep items from coming in contact with the exposed electronics while having a 15mm u.2 drive installed in the vertical orientation. If you use m3 standoffs you can keep the horizontal orientation as long as…
I made this after I got a minisforum pc to use as a server and after testing I realized it was better than my main rig but it was too loud with the stock fan and cpu cooler. I initially made an adapter for a noctua fan found here,…
Roman Forum Engraved Stone Cow Motif
An under the shelve mount for a minisforum U850, I think it will work for an U700 and U820. Supports will be needed for printing. No vents will be blocked.
Permet l'installation d'un disque dur Seagate 2,5" de 5 To (ST5000LM000)
I made this to use with my Minisforum V3. The perennial problem with all 2 in 1 type tablets is that they suck to use in your lap - this aims to fix that issue. It is a full keyboard, and the trackpoint allows full mouse functionality. I…
Desk platform for a Minisforum UM790 Pro mini PC with a JetKVM mount built in to help you organize your desk. The platform has divers that the UM790s rubber feet sit in securely, and a JetKVM holder to the right of the PC. On the bottom…
A fairly simple wall mounting bracket for a Minis Forum NBP7 server power brick. I would think this would work with other power supplies / bricks as I assume they're all fairly universal. As per the description, was designed specifically…
I wanted to add a fan to my Minisforum GK50 because i use it for my printer and it runs 24/7 most of the time. Its nothing special and i am no 3d Modeling Expert but it seems to work quiet well. The “mesh” isnt really airflow optimized…
I designed this to be able to throw this mini-pc into my luggage and take it with me wherever I go. The interior prints are made with a TPU as padding. The exterior is made from PETG or something with strong impact resistance. This will…
Couldn't find an SVG version of the Saddle Hunter Forum logo so did a quick trace. And here is the result. Printed it on a P1S with AMS. Used a eSUN PLA PRO Olive Green and Bambu Basic PLA orange. Just what I had on hand and not…
Sure, racking these in 1U would be nice, and there is a reasonable model available that can do that though it has a load of mesh errors. Removing the case is a hard no for me though, something about that does not sit right, mostly because…
An extra part I made for my UM690 when I had one back in May 2025. It's an all in one solution to keep ram cool while still having room for the SSD. Will make the overall height about 31mm bigger. USB cable is supposed to connect directly…
This is a 3d model of the Forum container, and lid, that accompanies the board game 7 Wonders Dice. It is a near-exact replica of the cardboard forum container that came with 7 Wonders Dice board game. I printed it with PLA on 0.2mm…
Rear support for Minisforum MS-01 2U rack mount The rear of the rackmounted MS-01 could use a bit more support so I've designed a mount for the back of the rack that will hold it up a bit better. Original rack mount:…
This is a model of a government building in pompeii.
I wanted to be able to attach my Minisforum V3 to mounts/arms easily. I have a few tablet mounts with clamps on them but it's a hassle to insert/remove the tablet every time I want to move to a different spot. And I also wanted to be able…
Vented Minisforum MS-01 Dual 19" Rack MountVented Minisforum MS-01 Dual 19" Rack Mount
This is a waterproof housing for the forumslader (ahead version) , a device to charge your Phone with the hub dynamo of your bike in a very efficient way. It can be mounted under the top tube of your bike with zipties. There is also an…
I had been needing something to cradle my MinisForum UM690 Pro that sits on top of Mac mini. So far this works great and allows for cooling required. I purchased a few small rubber feet and placed on bottom for stability.
This is my suggested solution to LeeH's embossing problem here: https://forum.prusa3d.com/forum/general-software-discussion/fusion-emboss-function/ Updated 240318 with simpler approach. More sketches but less time selecting lines.
If you're looking for a printed pen optimized for printing with a 0.4mm nozzle, use this instead. https://www.printables.com/model/747037-jowo-6-fountain-pen This model replaces my older test model which was based around the Fountain Pen…
Print it face down with tree supports on build plate only. The design requires four M3x8 screws and nuts for assembly. It's quite a snug fit, but the server then sits very safe in the bracket. None of the ventilation openings are covered…
On your Aoostar EG2 kit: remove the base plate (red color in picture) and keep all green parts with tubes dismounted from "H" upper plate. Add screw M5 inserts inside green marked holes and two M5x50mm hexagonal flat head screw in blues…
For English see below Es handelt sich um ein Gehäuse für den Forumslader V5 kompakt: https://www.forumslader.de/aeltere-versionen/automatiklader-v5/ Der Forumslader ist ein effektives Ladegerät zum Laden von Mobiltelefonen/ Tablets für…
To access the internals of the Minisforum UM680 Slim, you must peel off the rubber feet on the bottom to access the necessary screws. If you do this a lot the stickiness can decrease. I had one of mine fall off in my backpack. So I made…
Print with PETG on default settings. Mount to the radiator without screws. Use 30 mm screws to mount the fan (Arctic P12 Max). Adjust RPM in BIOS. Silence!
Everybody knows: Hexagons are the bestagons. But alas, my printer is not able to print those in the Z-direction without properly tuned PETG overhangs. This is a replacement case for the Minisforum MS-A2, designed using crystal-shaped…
MINISFORUM MS-S1 MAX — 10-Inch Rack Mount 3U Horizontal & 6U Vertical Versions | 3D Printable I designed these rack-mount options for the MINISFORUM MS-S1 MAX, a powerful mini workstation commonly used for local AI, home servers,…
